|
| 1 | Taking downframe or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each incl necessary repair to opening with CM 1:4 complete all as specifiedand directed. |
| 2 | Taking downframe or Chowkhats (w/o taking off shutter from the frame ) of any description notexc. 1.50 Sqmeach complete all as specified anddirected by Engineer-in-Charge. |
| 3 | Taking down Door shutter of any descriptionexc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specifiedand directed. |
| 4 | Dismantling of Plain or corrugated steel/Aluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 5 | Dismantling of wrought iron or mild steel works of any description , size or in any position including door,gates etc all as specified. |
| 6 | Excavation in hard/dense soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm all as specified and directed. |
| 7 | M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation etc complete all as specified and directed. |
| 8 | S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 9 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 10 | S & F Pipe, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) and similar work conforming to Fe-290 Gde E-165 |
| 11 | M&L for two coats synthetic enamel paint over a coat of red oxideprimer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified. |
| 12 | Taking down old steel /wooden windows with hold fast & making good sueface and S&Fwindows/ ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated (Base steel as per IS-513\"D\" quality) galvanised as per IS-277 with ZINC of 120GM/SQM .Windows /ventilators having frame suitable fordual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl6mmx12mm flat ironwith 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series). Note :(i)Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S.grill as per No. 10,11 and 13 of above mentioned drawing deemed to be inclusive in the rate quoted for unit.(ii)Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only. |
| 13 | Taking down old steel /wooden windows with hold fast & making good sueface and S&F windows/ ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated (Base steel as per IS-513\"D\" quality) galvanised as per IS-277 with ZINC of 120GM/SQM .Windows /ventilators having frame suitable forsingle shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat ironwith 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(3000 series). Note : (i)Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per No. 10,11 and 13 of above mentioned drawing deemed to be inclusive in the rate quoted for unit.(ii)Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only. |
| 14 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Steel /Aluminium framesglazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specifiedand directed. |
| 15 | Supply & fix sheet glass 5.5mm thick of selected quality exc. 0.5 Sqm each fixed to aluminium frame work with necessary rubberbeading complete all as specifiedand directed. |
| 16 | Supply & fix sheet glass 4mm thick of selected quality n exc. 0.5 Sqm each fixed to steel frame work with oil puttycomplete all as specifiedand directed. |
| 17 | S&F 4mm thick frosted floatglass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 18 | S&FStainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window framecomplete all as specified. |
| 19 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube completeall asspecified and directed. |
| 20 | S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of framemade out ofMS tubes for top and bottoms railsMS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete all as specified anddirected. |
| 21 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size 165x60mm inclframe back filling with PCC 1:3:6complete all asspecified and directed. |
| 22 | S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all asspecified and directed. |
| 23 | S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamferedor rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all asspecified and directed. |
| 24 | Supply & fixing block board 18/19 mm thick, grade 1 quality, exterior BWP grade termite proof, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Its class HW (Teak) or 0.5 mm thick PVC sheet lipping all around, fixed in repairs, complete all as specified and directed |
| 25 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new woodsurfacecomplete all as specifiedand directed. |
| 26 | S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specifiedand directed. |
| 27 | S&F 150 mm long Aluminium door handle, cast type, anodized complete all as specifiedand directed. |
| 28 | S&F 100 mm long Aluminium handles, cast type, anodised complete all as specifiedand directed. |
| 29 | S&Fof 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. |
| 30 | S&F of 75 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. |
| 31 | S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specifiedand directed. |
| 32 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifiedand directed. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifiedand directed |
| 34 | M&L for PCC 1:2:4 type B-1(20mm graded aggregate), 25mm thick as in sub base to the tile flooring complete all as specified and directed. |
| 35 | M&L for non skid ceramic coloured printed tiles 7 to 8 mm thick(square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed. |
| 36 | M&L forvitrified double chargetiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floorsetc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:4 complete all as specified anddirected by Engineer-in-Charge. |
| 37 | M&L for Glazed printed/ coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specifiedand directed. |
| 38 | Demolition to brickwork or stone/boulder masonry, built in cementmortar complete all as specified and directed. |
| 39 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed. |
| 40 | M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 41 | Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. Note :- For measurement superficial area in elevation will be measure. |
| 42 | S&F factory made 18mm-19mm thick PVC foam board of density 600kg/cbm manufactured by an ISO-900-2008 certified company one side prelam and other side plain for kitchen cabinet shutter including machine pressed PVC edge bandingin matching colour over all exposed edge Complete all as specified and directed. |
| 43 | S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed. |
| 44 | S&F factory made 5mm thick PVC sheet of density 600kg/cum manufactured by an ISO-900-2008 certified company. Plain 5mm thick PVC sheet panelling for back side(wall side) Complete all as specified and directed. |
| 45 | S&F 100 mm size Stainless Steelhandle, complete all as specified and as directed |
| 46 | S&F 38mm size Stainless Steel Piano hingescomplete all as specified and as directed. |
| 47 | M &L forABS body magnetic latches of size 50mm complete all as specified and directed. |
| 48 | M&L for 75mm thick PCC 1:3:6 Type C1 (20mm graded aggregate) as in floor/ path/ Plinth protection including necessary form work, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 49 | Supply and fixing in repairs Aluminium die cast Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specifiedand directed. |
| 50 | S&F in repairspower coated aluminium frame work fordoors, windows,partition s etc incl grill for windows for windows etc with one or more rebated section incl jointing cleats for fixingetc complete all as specified and directed. |
| 51 | S&F in repairs powder coated anodised aluminium door shutters, partition wall, aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubber neoprene packing, handles two Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified anddirected. |
| 52 | S&F in repairspowder coated anodised aluminium window and ventilator shutters , side hung type without sash bars aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubberpacking, aluminium anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1Nos0, hinges type B-21 100 mm long(2Nos) suitable handles (1Nos)complete all as specified anddirected. |
| 53 | S&F in repairs12mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete.all as specified and directed by Engineer - in - Charge . |
| 54 | S&F in repairs5.5 mm thick selected quality tinted sheet glass and glazing clip in square fixed with PVC/neoprene gasket in aluminium frame work complete. all as specified and directed by Engineer - in - Charge . |
| 55 | Taking down cementplaster of any description on brick or concrete surfaces of walls or ceilingetc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified |
| 56 | M&L for 15 mm thick rendering ofcement mortar 1:6, on brick work or concrete surfaces on wall and finished the surface even and smooth all as specified and directed by Engr in Charge. |
| 57 | M&L for 15 mm thick rendering ofcement mortar 1:4, on brick work or concrete surfaces on wall and finished the surface even and smooth all as specified and directed by Engr in Charge. |
| 58 | M&L for 5 mm thick rendering with cement mortar CM 1:3, on concrete surfaces as on ceiling, soffit of stair case, chhajjas facia etc including cement slurry etcfinished the surface even and smooth all as specified and directed by Engr in Charge. |
| 59 | M/L for preparation of new plastered surface of walls and applying two coats of OBD over chalk whitening complete all as specifiedand directed. |
| 60 | M&L for preparation ofnewlyplastered or unplaster surface and applying two coats of OBD on ceiling complete all as specified and directed |
| 61 | M & L for preparation of new surfaces of walland applying one coats of cement based paint complete all as specified and directed. |
| 62 | M & L for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified anddirected. |
| 63 | S&F in repairs5 mm thick ACPwall cladding sheet in colour as directed by Engr-in-charge fixed on MS frame . The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with Min 08 Nos GI fastener 5\" long per 1.5 sqm, including all necessary repairing work as reqd, two coats of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealent, masking tape, including cutting of V groves to fixing moulded ACP sheet self-tapping screw complete all as specified and directed by Engineer-in-Charge.Note:-1.Work to be carried out upto four storey bldg with MS scaffolding not bamboo.2. MS frame should be fixed on wall after painting. |
| 64 | M&L for complete removal of existing treatment of walls and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth all as specified and directed |
| 65 | M&L for complete removal and scraping of existing treatment of walls and applying one coats of oil bound distemper over a coat of primer all as specified and directed |
| 66 | M&L for complete removal and scraping of existing treatment on ceillingand applying one coats of oil bound distemper over a coat of primer all as specified and directed |
