|
| 1 | Dismantling of floor, hearth or wall tiling incl cement mortar beddingremoving to store and rubbish to premises complete all as specified and directed |
| 2 | M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeing 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified and directed |
| 3 | S&F Glazed ceramic coloured tiles in verticle surface of size 350x250x7 / 450mm thick including 10 mm thick rendering in CM (1:4)Overand jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors andpavings not exc 15cm thickness (below or above ground level)all as specified and directed |
| 5 | M&L cement concrete 25mm thick 1:2:4, type B0 (using 12.5mm graded aggegate) as inin floorand sub-base complete all as specified |
| 6 | Demolition of brick work or stone boulder masonry built in cement mortarcomplete all as specified and directed. |
| 7 | M&L for Brickwork with sewer bricks straight or curved on plan exc 6 m mean radius for manholes/ septic tank/ soak well etc. in sewer works in CM 1:4 complete all as specified and directed by Engr-in-charge. |
| 8 | All as per serial Item no 7.00 here-in-before but except bricks complete all as specified and directed. |
| 9 | M&L for brickwork with subclass \"B\" Bricks, straight or curved on plan any radius built in CM 1:4 in half brick thick wall complete all as specified & directed. |
| 10 | M&L for brickwork with subclass \"B\" Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge. |
| 11 | Taking down cement plaster on brick/ blocksurfaces of walls or concrete surface etcall as specified and directed. |
| 12 | M&L rendering 10 mm thick onface of PCC/brick masonary or concrete surfacein CM 1:6 finished even and smooth (without using extra cement)complete all as specified and as directed. |
| 13 | M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth complete all as specified and directed. |
| 14 | M&L rendering 15mm thick on PCC block masonary/other than fair face or brick masonary surfaces or concrete surfaces in CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 15 | M&L rendering 15mm thick on PCC block/brick masonary surfaces or concrete surfaces in CM 1:4 mixed wit WPC as per manufactures instruction and finished the surface even and smooth (without using extra cement) complete all as specified and directed.(WPC will be measured and paid seperately) |
| 16 | M&L for preparation of newly plastered surfacesofceiling and applying three coats of white wash complete all as specified and directed by Engr-in-charge. Note : Rates includes necessary scaffolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. |
| 17 | M&L for preparation of newly/old plastered surfacesofwallsand applying three coats of white wash complete all as specified and directed by Engr-in-charge. Note : Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. |
| 18 | M&L for complete removal of existing treatement and preparation of old plastered/concrete surfaces of walls/ roof/ incl necessary scaffolding by brooming down, steel wire brushing, scrapping down, smoke soot, moulds,moss & efflorescent salts and applying two coats of cement based paint over and including one coat of alkali resistant primer, complete all as specified and as directed by Engr-in-charge.Note : Primer shall be applied after complete removal to existing treatment from old painted plastered/concrete surface. Rates includes necessary scaffolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. |
| 19 | M&L forpreparation of new plastered/concrete surfaces of walls/roof/ incl necessary scafolding by brooming down, steel wire brushing, scrapping down, smoke soot, moulds,moss& efflorescent salts and applying two coats of cement based paint over and including one coat of alkali resistant primer, complete, all as specified and as directed by Engr-in-charge. Note : Primer shall be applied after complete removal to existing treatment from old painted plastered/concrete surface. Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) duringexecution of work. |
| 20 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed |
| 21 | M&L for 18mm thickGranite (of any type)machine cut, in window cills, bathroom platforms, shelf platforms etc.bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover and including 15 mm thick screed bed in CM 1:6 and polishing complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for 18mm thickGranite (of any type)machine cut, in vertical surfacesetc.bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover and including 12 mm thick rendering in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge. |
| 23 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in charge. |
| 24 | M&L for RCC (1:2:4) B0 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves and the likefinished fair and even complete all as specified & directed. |
| 25 | S&F Mild steel bars (TMT bars) 10 mm or above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge. |
| 26 | M&L for precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Type B1,1:2:4 (20mm graded aggregate) set in CM 1:4 complete all as specified and directed by Engr-in-charge. |
| 27 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provied for (reinforcement cut as required to facilitate demolition)complete all as specified and directed |
| 28 | M&L RCC 1:2:4, type B1(using 12.5mm graded aggegate) as in lean concrete in sunken floor etc. complete all as specified |
| 29 | M&L bitumen blown any grade applied hot, two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed. |
| 30 | M&L Polythene film black 50 micron laid in floor complete all as specified and directed. |
| 31 | M&L 15mm thick plastering in CM 1:3 on brick/concrete surfaces along the wall of toilet and bath or sunken portion of slab mixed with 3% WPC and finished even and smooth without using extra cement including two coats of two component cementitious and flexible acrylic coating of tapecrete RTU/ Piddifin 2K or equivalent over the clean and moisture surface in opposite direction to form a seamless layer to make the surface water resistance coating complete all as specified and directed. |
| 32 | S&F in repairs for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;complete including taking downall as specified and directed |
| 33 | S&F in repairs Vitreous china urinal partition white of size 350x 675 mm complete all as specified and directed. |
| 34 | Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing orremoval to store. |
| 35 | All as per item No 34.00 above but 20 mm bore. |
| 36 | All as per item No 34.00 above but 40 or 50 mm bore. |
| 37 | S&F for tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceillings or laid in floor for 15mm bore pipecompleteall as specified and directed |
| 38 | All as per item No 37.00 above but 20 mm bore. |
| 39 | All as per item No 37.00 above but 40 mm bore. |
| 40 | S&Fin repairs 40mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 41 | M & L Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting, not exc 10 cmgirth complete all as specified and directed complete as specified and directed by Engr-in-Charge. |
| 42 | Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/ laid in trenches including making good disturbed portion of wall floor etc. |
| 43 | S & F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/floor with and including clampscomplete all as specified and directed by Engineer-in Charge. |
| 44 | S & F 110 mm dia PVC (SWR) bends any radius, provided with access doorcomplete all as specified and directed by Engineer-in Charge. |
| 45 | S & FPVC (SWR) branch pieces, single (single \"Y\") equal or unequal, 110 mm bore provided with access door complete all as specified and directed by Engr-in Charge. |
| 46 | S & F PVC (SWR) branch pieces, double (double \"Y\") equal or unequal, 110 mm bore provided with access doorcomplete all as specified and directed by Engineer-in Charge. |
| 47 | S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access doorcomplete all as specified and directed by Engr-in-charge. |
| 48 | S & F PVC (SWR) junction double (double T) equal or unequal 110mm bore, provided with access doorcomplete all as specified and directed by Engineer-in Charge. |
| 49 | S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clampscomplete all as specified and directed by Engineer-in Charge. |
| 50 | S & F75 mm dia PVC (SWR) bends any radius provided with access doorcomplete all as specified and directed by Engineer-in Charge. |
| 51 | S & FPVC (SWR) junction single (single T) equal or unequal 75mm bore,complete all as specified and directed by Engineer-in Charge. |
| 52 | Taking down floor trap/nahani trap of any description any size and making good to disturbed portion with cement concrete type (B-1) 1:2:4 with water proofing compound |
| 53 | M & L for 75mm outlet dia PVC (SWR)floor trap, plainwith grating including jointing with solvent cementall as specified and directed. |
| 54 | S & F oval shapecounter top wash basin of size 560x 410mm including waste coupling etc complete as specified and directed by Engr-in-Charge. |
| 55 | S&F in brass chromium plated bottle traps 32mmfor wash basins with inlet and outlet screwed forpipe or connections including necessary packing, union and cap and fixed complete all as specified all as specified and directed by Engineer-in Charge. |
| 56 | S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm complete all as specified and directed as Engr-in-charge. |
| 57 | S & F looking mirror of selected quality 5 mm thick mounted on 2mm thick laminated PVC sheet or 6mm thick AC building board or commercial plywood and fixed to wooden plugs withchromium plated brass screws and cup washerswith necessary fixing arrangement complete as directed. |
| 58 | S&F in repairs brass chromium plated 20mm dia ,Tubular towel rail, D type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed by Engr-in-charge. |
| 59 | S&F in repairs Bib taps (15mm dia of bore), cast copper alloy with capstan heads, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed includng necessary fittings complete all as specified and directed by Engr-in-charge. |
| 60 | S&F in repairs Pillar taps (15mm dia ofbore) , cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed brass chromium Concealed angle stop cock with wall flange of15mm dia capastan head including neccesary fittings complete all specified and directed by Engr-in-charge. |
| 61 | S&F in repairs 15mm Stop valves, cast copper alloy,, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedincluding neccesary fittings complete all specified and directed by Engr-in-charge. |
| 62 | S&F in repairs 15mm Angle Stop valves, cast copper alloy,fancy type, chromium platedscrewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedincluding neccesary fittings complete all specified and directed by Engr-in-charge. |
| 63 | S&F in repair 10 ltr capacity PVC low level flushing cistern, valveless, duel symphonic action type, white, with inlet ball valve, float and handle including bracket and 32mm dia flush pipe of polyethylene of low or high density for low level cisterncomplete all as specified and directed. |
| 64 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 x 280mm mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, connection to trap and to flushing pipe, anti syphonage pipe etc complete making good to floor complete all as directed. |
| 65 | S&F in repair viterous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap provision of flush pipe ,anti sypohonage pipe etc. with plastic wc seat cover (white) forclosed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deviceof complete all as specified and directed. |
| 66 | S & F in repair CP Health Faucet 8 mm diawith 1 meter long Easy flex tube and wall hook with NRV (black flow preventor) Make - Jaguar Cat No ALD CHR - 583) or equivalent in Hindware/ Parryware complete all as specified and directed by engr-in-charge |
| 67 | S & F in repair overhead showerof 125 mm dia Brass chromium plated shower rose round shape single flow with or without swivel joints, any size, including fixing to steel pipe or unioncomplete all as specified and directed Make : Jaquar |
| 68 | Taking down PVC Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames) complete all as specified and as directed. |
| 69 | Taking down PVC chowkats or frames with shutter(without taking off shutters from the frames)exc 1.5 sqm but not exc 4 sqm each and removing from site complete all as sepcifed and directed. |
| 70 | S & F solid PVC doorframe of size 50mm x 47mm made out of5 mm plain colour PVC sheet reinforced with MSD square tubeetc complete all as specified and as directed. |
| 71 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall becovered with heat moulded Plain Colour PVC \"C\" Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawings, including all fitting and fixtures complete all as specified and as directed by Engr-in-charge. |
| 72 | S & F Mild steel butt hinges medium weight , cold rolled, 75mm, ISI marked complete all as specified and directed. |
| 73 | S & F aluminium anodised, barrel tower bolts of extruded section and fixed 100 mm complete all as specified and directed. |
| 74 | S&F 100 mm long aluminium anodised handles or extruded section complete all as specified and directed. |
| 75 | S&F 300mm long Aluminium alloy, anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 76 | S&F stainlessSteel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, fixingetc. complete all as specified and as directed. |
| 77 | S&F Steel ventillator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed by Engr-in-charge. |
| 78 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-charge. |
| 79 | S &Ffor obscured or frosted Sheet glass, ordinary quality 3mm thick and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge. |
| 80 | M&L for steel surfaces over 10 cm width or girth including preparation of new surfaces with 2 coats of syntheticenamelled paint over coat of red oxide complete all as specified and directed.. |
| 81 | Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded complete all as specified. |
| 82 | Supply only water proofing compoundas perlatest IS specification complete all as specified and as directed. |
| 83 | M & L Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed. |
| 84 | Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms ,moulds, mi-tred/stopped ends etc. complete all as specified and directed. (inner grith only measured) |
| 85 | Add or deductfor each 25 mm girth or part thereof over30cm inner grith ditto over item no 84.00 above complete all as specified and directed.(inner grith only measured) |
| 86 | M&L for Plain Cement concrete 1:3:6 type C-2, using 20mm graded stone aggregate as in surface channel, drain complete all as specifed and directed. |
| 87 | M&L for 75mm thick cement concrete Type C-2 ,1:3:6,(Using 40mm graded aggregate) as in plinth protection , sub-base complete all as specified and directed by Engr-in-charge. |
| 88 | Dismantling water tanks of 1000 ltr capacity and removing to store |
| 89 | Dismantling water tanks of 2000 ltr capacity and removing to store |
| 90 | S & F 1000 liters rotaional moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 20mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as directed by Engr -in-charge. |
| 91 | S & F 2000 liters rotaional moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 40mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as directed by Engr -in-charge. |
| 92 | M & L for cleaning of all loose dirt & dust, removing of previous treatment from roof surface and applying roof treatment as under :- (a) 10 mm thick plastering in Cm (1:4) using 100 % coarse sand on roof/ parapet walls/ side walls with wpc @ 3% BY WEIGHT OF CEMENT (b) Applying coat of bituminous primer @ 0.10 litre/ Sqm on prepared surfaces and allow to dry (c) Supply and laying of 3mm thick minimum polymeric water proofing membrance weighting not less than 3.5 kG/ Sqm black finish reinforcement with non woven polyster matt with help of torching with proplane or abutance gas using torch with minimum 75 mm side overlap and 100 mm end overlap as per manufacturar instruction. complete all as specified and directed. |
| 93 | S&F in repairs 32mm dia bore Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches complete all as specified and directed. |
| 94 | E/M Portion |
| 95 | Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, wooden batten, conduit etc. including accessories such as wooden gutties/ rawal plug, screw etc including making good disturbed surface to match the existing surface. |
| 96 | M&L forpoint wiringfor light point with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC Casing & Caping of size not less than 25 x 12mm / 32 x 12mm suitable as per site reqmt, ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc. screws, gutti / roul plugs PVC all as per site requirements including plastic terminal boxesfor mounting of switches/ sockets/ regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, &Earth – Green |
| 97 | All as per serial item No 96.00 here in before but one fan point controlled by one no 5 Amp switch comple all as specified and directed by Engr-in-Charge |
| 98 | All as per serial item No. 96.00 above but with socket outlet 5 Amps controlled by one switch on the same board. |
| 99 | All as per serial item No 96.00 here in before but for power point wiring with 2.5 Sqmm FRLSH PVC insulated, unsheathed copper conductor stranded 1100 volts grade cable and 2.5 sqmmcable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, &Earth |
| 100 | Supplyandfixing Switch piano type one way 5 amps 230 volts completeall as specified and directed by Engr-in-Charge |
| 101 | Supplyandfixing ceiling rosesurface bakelite 65x50 mm three terminals (ISI Marked) AC, 230 Volts on PVC box complete all as specified and directed by Engr-in-Charge |
| 102 | Supplyandfixing SwitchSocket combinationoutlet 5 pin 5 Amps flush type complete all as specified and directed by Engr-in-Charge |
| 103 | SupplyandfixingSwitch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal 230 volts complete all as specified and directed by Engr-in-Charge |
| 104 | Supply and fixing of surface mounted batten type LED luminaires 20 W 230V, Ac) on wall by stainless steel screw, rawl plug etc. & connecting upto ceiling rose with three core sheathed copper conductor cable (white/grey colour of suitable size complete all as specified and directed |
| 105 | S & F for batton holder insulated body all as specified and directed by Engr-in-Charge |
| 106 | S & F for LED NU Bulb Plus 9 W 865 B22 3 Star LHLDEUECNL8R009 945 6500 K 206 30 90 0.050 A B22 8539all as specified and directed by Engr-in-Charge |
| 107 | Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 300mm sweep heavy duty with copper winding complete including making hole in existing wall and finishing with cement ratio 1:4 of 15mm thick plaster work on brick surface/ concrete surface/ stonewith louvers/ flip cover ofexhaust fan made with 0.5 mm thick sheet in square/ round all as specified and directed by Engr-in-Charge |
| 108 | Taking down carefully (dismantling) ceiling fans and Exhaust fan, dismantling blades deposit to MES Yardand including transportation, the same re-fixing/ hanging, fixing and connecting up and testing etc after complete of rewiring, complete all as specified anddirected by Engr-in-Charge |
| 109 | M&L forSub main wiring with two single core PVC insulated cable of size2 X 6 Sqmm + 1 X 6Sqmm earth wire multi stranded copper conductor drawn in heavy duty PVC conduit not less than 25 mm dia with all fittings and continuous earth wire complete concealed with wall and making good disturbed surfaces of wall/ floor etc. complete all as specified and directed by Engr-in-Charge |
| 110 | Supply and fix sheet metal enclosure MCB SPN distribution board,8 way, Double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush in wall/ surfaces complete. |
| 111 | Supply and fixing SPN 32 AMP amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 112 | Supply and fixing SP 6 to 32 AMP amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
