Supply Of Excitation Control Card For Demu/Dpc To Detailed Specification As Under : (1) Operating Voltage-110V +/- 25V,(2) No. Of 4 Pin Connectors-2 Nos. 3) Type Of Contactors -Pheonix. 4) Field Current-Up To 10Amps Dc. 5) Status Indications-Excitation Su, Chennai-Tamil Nadu

Supply Of Excitation Control Card For Demu/Dpc To Detailed Specification As Under : (1) Operating Voltage-110V +/- 25V,(2) No. Of 4 Pin Connectors-2 Nos. 3) Type Of Contactors -Pheonix. 4) Field Current-Up To 10Amps Dc. 5) Status Indications-Excitation Supply Led. 6) Heat Sink-All Power Devices Are To Be Mounted On Anodised Aluminium Heat Sink. 7) Printed Circuit Board-Double Sided Glass Epoxy Laminated Only. 8) Ics-All Integrated Chips Used Should Be Imported And Directly Soldered On Printed Circuit Board. 9) Short Circuit Protection Should Be Provided. 10 ) Galvonic Isolation Should Be Provided.Excitation Control Card For Demu/Dpc To Detailed Specification As Under : (1) Operating Voltage-110V +/- 25V,(2) No. Of 4 Pin Connectors-2 Nos. 3) Type Of Contactors -Pheonix. 4) Field Current-Up To 10Amps Dc. 5) Status Indications-Excitation Supply Led. 6) Heat Sink-All Power Devices Are To Be Mounted On Anodised Aluminium Heat Sink. 7) Printed Circuit Board-Double Sided Glass Epoxy Laminated Only. 8) Ics-All Integrated Chips Used Should Be Imported And Directly Soldered On Printed Circuit Board. 9) Short Circuit Protection Should Be Provided. 10 ) Galvonic Isolation Should Be Provided.,Excitation Control Card For Demu/Dpc To Detailed Specification As Under : (1) Operating Voltage-110V +/- 25V,(2) No. Of 4 Pin Connectors-2 Nos. 3) Type Of Contact Ors -Pheonix. 4) Field Current-Up To 10Amps Dc. 5) Status Indications-Excitation Suppl Y Led. 6) Heat Sink-All Power Devices Are To Be Mounted On Anodised Aluminium Heat S Ink. 7) Printed Circuit Board-Double Sided Glass Epoxy Laminated Only. 8) Ics-All Integ Rated Chips Used Should Be Imported And Directly Soldered On Printed Circuit Boar D. 9) Short Circuit Protection Should Be Provided. 10 ) Galvonic Isolation Should Be Provided. Note: Manufacturers Should Indicate Their Identification Mark, Month And Year Of Manufacture At A Suitable Location By Using A Suitable Method Without Affecting The Performance Of The Product. [ Warranty Period: 30 Months After The Date Of Delivery ] => Limited

Refer document

Refer document

Refer document