Military Engineer Services-MES has published Tender For Addition / Alteration To Existing Billet For Agniveer Vayu And Certain Minor Work At Af Stn Kalaikunda Under Ge Af Kalaikunda. Submission Date for this Tender is 29-03-2024. Railway Ancillaries Tenders in kalaikunda West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Mar-2024 | REVISED BOQ. | Financial Bid | 22-03-2024 |
| 2 | 13-Mar-2024 | REVISED BOQ | BOQ | 22-03-2024 |
| 3 | 22-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-03-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing of debris from premises and cleaning roof surfaces by brushing etc and washing down with water and removing dirt, dust etc complete to receive roof treatment all as specified and as directed. |
| 2 | Taking out of old damaged unserviceable tarfelt or membrane of any descriptionincluding screed bed or bedding layer and removing of debris from premises and cleaning roof surfaces by brushing etc and washing down with water and removing dirt, dust etc complete to receive roof treatment all as specified and as directed. |
| 3 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling with cement mortar (1:4) with using WPC as per manufacturers instruction over two coast of primer mixed of Latex and cement @ 1:4 (by weight) in the grooved portion and extended upto 100 mm both sides of groove complete all as specified and as directed. |
| 4 | M&L for 30 mm thick (Average) cement concrete type B-0, 1:2:4 using 12.5 mm graded aggregateas in roof padding, levelling course or similar work in order to maintain proper slope and camber finished the surface fair and evencomplete all as specified and as directed. |
| 5 | M & L for 10 mm thick screed bed or bedding layer incement mortar 1:4 (to be laid when concrete is still green) with water proofing compound for roof as per Manu-factuerer’s Instructions, complete including ponding test for 72 Hrs all as specified and as directed. (Note : WPC will be measured and paid separately) |
| 6 | M & L for onecoat of cold bitiminous primer (IS 3384) @ 0.25 Ltr/sqm apply evenly including cleaning of surfaces complete all as specified and direcetd |
| 7 | M&L for layingAPP based polymeric membrane minimum weighing 3.5Kg/sqm and mimimum 3mm thick reinforcedwith polyster non woven fabric (weighing. not less than 160 gms/sqm) laid on primed surface by torch application complete all as specified and direcetd. The overlaps shall be minimum 100 mm on the transverse direction and 75mm on longitudinal direction. |
| 8 | Supply only Liquidwater proofing compound conforming to IS: 2645 - 2003 specification complete all as specified and as directed. |
| 9 | M&L for PCC 1:2:4 type BO using 12.5 mm graded aggregate as inhaunching. Kerb in roof,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, or similar work completeall as specified and as directed. |
| 10 | Demolation of cement concret(reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing of debris from premises complete all as specified and as directed. |
| 11 | M&L for RCC type B1 1:2:4 (using 20 mm graded aggregate) as in chajjascomplete all as specified and as directed. |
| 12 | M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed. |
| 13 | M & L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed. |
| 14 | M&L for form works (steel plate stiffened with steel angles, steel pipe scaffolding telescopic or otherwise) to chajjas etc .for rough finished surfaces of concrete complete all as specified and as directed. |
| 15 | M&L For Formwork (steel plate stiffened with steel angles, steel pipe scaffolding telescopic or otherwise) to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping andsimilar work exc 10cm but n exc 20cm wide |
| 16 | Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed. |
| 17 | Materials and Labour for rendering 5mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, at any height and safety measures complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately) |
| 18 | Materials and Labour for rendering 10mm thick, cement plaster, in cement mortar (1:6)onfaces of brick work or concrete surface in walls, at any height and safety measures complete all as specified and directed. |
| 19 | M&L for Rendering 5mm thick in Cement Mortar 1:3 on ceiling surfaces finishing even and smooth without using extra cement complete all as specified. |
| 20 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 21 | Material & Labour for preparation of new surfaces of plastered walls and applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmover and includinga coat of 1.5 mm thick white wall care putty (premiumquality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified . . |
| 22 | Material & Labour for preparation of new surfaces of plastered walls and applying Twocoats ofDistempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. over and includinga coat of 1.5 mm thick white wall care putty (premiumquality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified . . |
| 23 | M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etcby brooming down or steel wire brushing and sand paper, scrapping down smokesoot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and makinggood with external wall care putty as per existing thickness and applying one coat of100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on old surfaces complete all as specified and as directed. |
| 24 | All as per BOQ Srl No23.00here-in-before but for ceiling surface |
| 25 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and jointed in any mortar |
| 26 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over and including 12mm thick screed bed or bedding layer in cement mortar (1:3) andjointing with white cement (1:2) using marble dust with admixture ofpigment to match with shade of granite. |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing and depositingserviceable tiles where directed, and rubbish off the premises. |
| 28 | Materials and Labour for, Digital Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, Grade B II, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed. |
| 29 | M & L for glazed, colour ceramic wall tiles (group B III), of size450 x 350 x 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:3), set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed. |
| 30 | M & L for glazed, colour ceramic wall tiles (group B III), of size300 x 200 x 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:3), set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed. |
| 31 | S&F of 150mm long (Overall length of cover plate) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 32 | Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane with and including hacking out old broken glass (any thickness, size, quality or description) fromframe including providing wooden beads painted with two coat of enamel paint over a coat of primercomplete all as specified and directed. |
| 33 | S & F 3mm thickfigured Sheet glass pin headed type and glazing with oil putty and pins in square n exc 0.5 sq. m in each pane on wooden/steel joinery with and including hacking out old broken glass (any thickness, size, quality or description) fromframe including providing wooden beads painted with two coat of enamel paint over a coat of primercomplete all as specified and directed. |
| 34 | S & F in repairs stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 35 | Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed. |
| 36 | Taking up or down, steel tubing 20 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed. |
| 37 | Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. |
| 38 | Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. |
| 39 | Refixingold steel tubing and connections 15mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and as directed. |
| 40 | Refixingold steel tubing and connections 20mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and as directed. |
| 41 | S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant and includingCP jet nozzle for EWC incuding connection to GI pipe line complete complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 43 | S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed. |
| 44 | S & F in repairs counter top wash basins, vitreous china, white, , size 550 mm X 450 mm x 200 mm with and including32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings,and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 45 | Supply and fixing swan neck pillar tap, cast copper alloy with capstan head chromium plated mirror finished screwed down high pressure with or without lettered Hot, or Cold with long screwed shank and fly nuts, screwed for iron pipe of 15mm bore. |
| 46 | S&F in repairs CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 47 | S&F of 600mm long PVC connections 15mm size with PTMT nuts of length 300mm |
| 48 | S & F in repairs flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 900 mm connected to PVC waste fittings complete all as specified and as directed. |
| 49 | S&F in repairs brass Chromium plated shower roses 125mm with arm with or without swivel joints, any size, including fixing to steel pipe or union |
| 50 | S&F in repair 15 mm dia Brass CP wallmixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixedwithand including hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete |
| 51 | Supply and Fixbib tap, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed (For geyser only). |
| 52 | Supply and Fix in repairsbib tap, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed. |
| 53 | S & F rotational moulded polyethylene multi- layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes including dismantling the existing one and removing to store complete all as specified and as directed. |
| 54 | S & F rotational moulded polyethylene multi- layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes including dismantling the existing one and removing to store complete all as specified and as directed. |
| 55 | M&L cleaning of service PVC tank by rubbing vertical wall and bottom of with bleaching powder and allowed ½ hour to react and then washing down with water to get free from deposits and bleaching inside the tank of capacity exceeding 250 ltrs & upto 500 ltrs capacity complete including lettering/numbering Date of Cleaning all as specified & as directed. |
| 56 | M&L cleaning of service PVC tank by rubbing vertical wall and bottom of with bleaching powder and allowed ½ hour to react and then washing down with water to get free from deposits and bleaching inside the tank of capacity exceeding 500 ltrs & upto 1000 ltrs capacity complete including lettering/numbering Date of Cleaning all as specified & as directed. |
| 57 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 20mm bore dia iron pipe and fixed. (Minimum weight2 0mm-210gms). |
| 58 | S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 20mm bore dia iron pipe and fixed. (Minimum weight2 0mm-210gms). |
| 59 | S&F in repairs 1800 mm x 1200 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 60 | Taking down SWR pipes (any size or pattern), including all fittings, "T", bends,etc., including removal to store for taking credit or for refixing (measured overall as fixed along the centre line over fittings and accessories), complete all as directed. |
| 61 | S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, fixed to walls incuding mild steel clamp not more than1metre C/C complete all as specified and directed by Engineer- in- charge . |
| 62 | All as per BOQ Srl No 61.00here-in-before but for fixing only ncuding mild steel clamp not more than1metre C/C complete all as specified |
| 63 | S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, fixed to walls incuding mild steel clamp not more than1metre C/C complete all as specified and directed by Engineer- in- charge . |
| 64 | All as per BOQ Srl No 63.00 here-in-before but for fixing only ncuding mild steel clamp not more than1metre C/C complete all as specified |
| 65 | S & F UPVC bends with inspection door (any angle), 110 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge |
| 66 | S & F UPVC bends with inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge |
| 67 | Supply and fixPVC SWR Nahani/ Floor trap, multi inlet connection, plain with grating including jointing with solvent cement, dia of outlet 75 mm, water seal minimum 50 mm, complete all as specified and directed by Engineer in charge. |
| 68 | S&F PVC (SWR) junction single, (Single T) equal or unequal with inspection door |
| 69 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 70 | S&F of Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 71 | S&F of Grating doom 125mm dia of PTMT (Minimum weight 40gms) |
| 72 | S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge |
| 73 | S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge |
| 74 | Supply and fixing brass chromium plated central hole basin mixer, single lever without popup waste system with 450 mm long braided hoses |
| 75 | Supply and Fix, stop valves, cast copper alloy , fancy type, chromium plated, screwed down, high pressure with long shank and cup (concealed type), screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed. |
| 76 | Supply and Fix, stop valves, cast copper alloy , fancy type, chromium plated, screwed down, high pressure with long shank and cup, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed. |
| 77 | Supply and fixing angle stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe of bore 15mm, fancy type, chromium plated long thread with flange. |
| 78 | S&F in repairs 40mm wide and 5mm thick PVC door seal (snake guard) with powder coated aluminium frame |
| 79 | S&F in repairs Hand Shower (Health Faucet) (ABS Body) with 1.25 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook. |
| 80 | S&F for brass chromium plated toilet paper holder fixed to walls etc.with CP brass screws complete all as specified and as directed. |
| 81 | S&F in repair, Brass CP soap dish single. |
| 82 | S & F in repairs vitreous china squatting pan, "Orissa" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 83 | S&F in repairs Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 84 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed(unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.) |
| 85 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) areaexceeding 1.50 sqm and n.exc 4.00 Sqmm each complete all as specified and as directed(unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.) |
| 86 | Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm Prelam PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed. |
| 87 | Supply and Fix, factory made solid panelPlain PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of both sides plain PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed. |
| 88 | Supply and Fix, steel ventilator with top hung shutter including hinges, steel peg stay, complete, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed. |
| 89 | S & F 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 90 | S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified. |
| 91 | Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 92 | S&F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed. |
| 93 | Supply only100 mm medium weight mild steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed. |
| 94 | S&F 150mm aluminum extruded aluminium alloy handles (fabricated type) anodised of mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 95 | Taking down carefully point wiring for one light, socket or power etc incl all fittings such as switches sockets, holders, light fittings, fan requlators etc and making good the disturbed surface of wall, ceiling etc includingseperating serviceabel light fittings, switches etc and keeping in safe custody for reuse and removal of unserviceable materials from site complete all as specified and directed. |
| 96 | M & L for concealed point wiringcomplete with 1.5 sq mm FRLS,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral),drawn into and including non metalic PVC rigid conduit medium grade of suitable size and conduit accessories fixed on wall, floor, roof etc. and including provision of PVC insulated 1.5 sq mm copper conductor for earth continuity (Green Colour)and connected to common earth dolly and including pressed steel terminal flush boxesmade out of 1.6 mm thick MS sheet suitable for modular switches concealed in wall and modular cover plate with frame for housing the switches socket,outlet etc.,all as specified and directed by Engineer-in-Charge for one light point controled by one one way 5/6 Amp switch Note:-(a) Note :- Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface and modular box, modular cover plate with frame are deemed to be included in the quoted rate. |
| 97 | All as per BOQ item No 96.00 here-in-before but except modular box, modular cover and plate. |
| 98 | All as per BOQ item No 96.00 here-in-before but forone 5 pin socket outlet 06 Amps on independent board ( but Not below the switch board of light points in the same vertical plane) except modular box, modular cover and plate. |
| 99 | All as per BOQ item No 96.00 here-in-beforebut for one power pointtusing by 4.0 sq mm copper conductor cable with 4.0 sq mm PVC insulated single core copper cable for earth continuity conductor, on independent board |
| 100 | Supply & fixing modular switch one module single pole 5/6 Amps one way. |
| 101 | S & F ceiling roses, 6A, 240 V, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed. |
| 102 | Supply and fixing for sub main wiring concealed with two run of single core FRLS6.00 Sqmm PVC insulated unsheathed stranded cable copper conductor drawn in includingthrough PVCrigid conduit medium grade of suitable size with all fittings including 6.00 sq mm PVC insulated unsheathed single core copper conductor as earth wire complete all as specifiedincluding taking out complete existing sub main wiring with conduit. Note : (i) Two run of single core cable 6 sq mm and one run earth wire 6 sqmm , one run of PVCconduit and cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint will be measured as one length. |
| 103 | S & F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps ratedcopper busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL powder coated, IP 43,IK09including fixing the DB box flush in wall of any type and making good the distrubed surface to match asthe existing with and electrically connecting up complete all as specefied. |
| 104 | S & F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps ratedcopper busbar, 8 way Double door enclosure made up of CRCA sheet steel, RAL powder coated, IP 43,IK09including fixing the DB box flush in wall of any type and making good the distrubed surface to match asthe existing with and electrically connecting up complete all as specefied. |
| 105 | S&FMCB SPN 240 volts40 to 63Amps, 10 KA breaking capacity,"B" Curve including connection with suitable sizecopper lugs complete all as specified and directed by Engr-In-Charge . |
| 106 | S&FMCB SP 240 volts 6 to 32Amps, 10 KA breaking capacity,"C" Curve including connection with suitable sizecopper lugs complete all as specified and directed by Engr-In-Charge . |
| 107 | S & F in repair single pole and neutral enclosure with two pin and earth,plugand socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 32 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed. |
| 108 | S&F LED 20 Watt tube light fitting(T8 type), single/double side connection type includingLED retrofit tubelamp 20 W , LED tube light nominal power 20 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 120 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 polycarbonate housing life span of minimum 50000 working hours complete fittingincluding connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, and PVC round/ square box white colour x 2 Nos for mounting of fittingincluding taking down old unserviceable complete all as specified & directed: |
| 109 | S&F in repairLED 2 ft, 9-10 Watt light fitting mirror type intergated type, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, , lumen efficacy of minimum 100 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 epoxy powder coated white extruded aluminium channel housing, life span of minimum 50000 working hours completesuitable for surface mounting on wall,complete fittingincluding connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. |
| 110 | Supply & fixing heavy duty exhaustfan with louver shutter, 300 mm sweep, 1400 RPM, 4 bladesuitable for operation on 240 volts, AC, 50 Hz, single phase electric supply with necessary bolts (6 inches long, 6 mm dia.) with nuts and washers for fixing the fan in wall including making necessary electric connectionfromceiling rose to the fan with PVC insulated flexible cord copper of size 0.75 sqmm complete all as specified and directedwith andincluding cutting holes of adequate size and making good the disturbed surfaces as per existing, suitable for fixing exhaust fan forcomplete all as specified and directed by Eng in Charge. |
| 111 | S&F recess mounting luminaire (PANEL LIGHTING) with high performance LEDs, suitable for mounting withArmstrong/Grid ceiling Fixture size: (LxW) in (595x595) mm LED 36 Watt with CRCA powder coated housing (white after phosphochromate treatment) High efficiency long life LED package in integral module with lumen efficacy of >120 lm/W and viewing angle of 120° to ensure better uniformity, electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test as per IS:15885 Part 2/Sec 13. LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung,operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen output of minimum 4350,protection grade IP 20, CRI greater than or equal to 80%,THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 , life span of minimum 50000 working hours complete fittingincluding connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core,including taking down old unserviceable complete all as specified & directed: |
| 112 | S&F of modular metal flush box 4 module complete all as specified |
| 113 | S&F of modular metal flush box 3 module complete all as specified |
| 114 | Supply and fixmodular cover plate with frame, 4 module. |
| 115 | Supply and fixmodular cover plate with frame, 3 module. |
| 116 | Supply and fix modular switch 1 way, 16 amps, 1 module. |
| 117 | Supply and fixmodular socket, 6/16Amps, 2/3 pin combined 2 module. |
| 118 | Supplying, installing, testing & commissioning, storage water heater (geyser), 25 litres capacity, standing loss less than 0.562 Kwh per day for 45°C difference of temperature as per IS 2082 (five-star rated as per BEE), reheating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 4 years on heating element and 2 years on other spares parts comprising following fittings (a) glass coated incoloy element (b) capillary type thermostat (c) digital display unit (d) thermal cutout (e) multifunction valve (f) earth leakage circuit breaker (g) magnesium anode rod cathodic protection (h) flexible cable of suitable length with 3-pin plug of 16A capacity (i) drain plug (j) fusible plug fitted on the crown of water heater with operating temperature between 100°C to 110°C including fixing by grouting and fastener complete all as specified and as directed.Make JAQUAR/USHA/AO-SMITH or Equivalent make NOTE :-(i) Contract shall submit the brochure of geyser with detail technical specification and take approval of GE before procurement. (ii) All civil work required on site for hanging the geyser and to make good to match the surface as existing to be done by contractor without any extra cost. (iii) All the necessary accessories and T&P require on site for installation of geyser shall be provided by contractor. (iv) Contractor shall submit the manufacturer warranty card to the department before claiming payment to department.(v) If extra cable (PVC insulated sheated 2.5 Sqmm x 2 core copper conductor) required on site for extension of electric supply connection from Geyser to Metal Plug socket the same (upto 3 mtr) shall be provided by the contractor without any extra cost. |
| 119 | Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, concealed type including cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface complete all as specified |
| 120 | S&FGun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed . |
| 121 | S & F stainless steel braided flexible connection pipe for hot and cold water supply for geyser, 15 mm bore, 600 mm length, 12 bar working pressure complete all as specified and as directed. |
| 122 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet |
| 123 | S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansionfasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified. |
| 124 | S&F of Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified. |
| 125 | Material & Labour for preparation of new surfaces of calcium silicate on ceiling and applying Twocoats of plastic emulsion paint over a coat of primer complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
