Military Engineer Services-MES has published Tender For Repairs To Steel Door, Ventilators, Valley Gutter, Ridge, Wall Cladding, Galvalume Sheet, Oiling, Greasing To Steel Doors, Wooden Scantling To Receipt And Issue Platforms And Other Connected B/R Works Inside Depot Area At Cad Pulgaon. Submission Date for this Tender is 18-03-2024. Greases Tenders in pulgaon Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Mar-2024 | Corrigendum_01 | BOQ | 18-03-2024 |
| Sl. No. | Item Description |
| 1 | S & F in repairs 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofsetc fixed with "L" or "J" or cranked hooks boltall as specified and directed by EIC. Note: Rate for removal and refixing of lightening conductor / strips / assembly is deemed to be included under quoted rate of this item. |
| 2 | All as per above item No 01 here-in-before but fixing only (except sheets) |
| 3 | S & F in repairs 0.63 mm thick Plain, galvanised, mild steel sheeting with zinc coating @ 275 grams per sqm in ridges all as per site requirement |
| 4 | All as per above item No 03 but except sheets |
| 5 | S & F in repairs 1 mm thick Plain, galvanised, mild steel sheeting with zinc coating @ 275 grams per sqm in valley gutter with 150 mm lap joint water proof as directed cut to size and bent to shape turning up and down including stopped end punching holes and making with head screws to support with bitumen washers all as specified. |
| 6 | All as per item No 05 butfixing only (except sheeting) all as per site requirement & directed by EIC |
| 7 | M&L in cleaning Valley gutter to avoid water blockage and making joints good for lap jointing with bituminous water proofing membrane complete all as specified. |
| 8 | S & F in repairs to valley gutter joints with 150 mm lap joint with bituminous water proof membrane as directed cut to size and bent to shape turning up and down including stopped end punching holes and making with head screws to support with bitumen washers all as specified. |
| 9 | S & F in repairs wrought iron or mild steel work as in MS wind ties of specified size for AC Sheet roofing including all necessary drilling,bolting or riveting etc and similar work coinforming to Fe-290 Gde E-165 all as specified and directed by EIC. |
| 10 | Fixing only in repairs only MS wind ties after fixing of AC sheet all as specified and directed by EIC. |
| 11 | M & L for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces or rusted old surfaces in wind ties, sheets etc exc 10cm width or girth including preparation of new or rusted steel surfaces all as specified and directed by EIC. |
| 12 | M & L for painting with one coat of synthetic enamel paint on old steel painted surfaces in wind ties, sheets etc exc 10 cm width or girth including preparation of old steel painted surfaces all as specified and directed by EIC. |
| 13 | S&F in repiars Black, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in wall partition/cladding etc. complete all as specified and as directed. |
| 14 | All as per item No 13 but Except Sheeting |
| 15 | M&L Repair to mild steel door including greasing, oiling, etc., without taking down the mild steel door complete all as specified and as directed. |
| 16 | M&L taking down the mild steel door of PFs or ESHs and repairs required like Straightening bent doors and fixing again including greasing, oiling, etc. complete all as specified and as directed. |
| 17 | M & L in repairs 2nd class hard wood wrought timber framed and fixed as in trusses and scantiling, any type of frame work, in cladding, purlins, rafters etc including cutting, drilling, bolting etc complete all as specified andas directed. |
| 18 | All as per above item No 17 here in before but except wood |
| 19 | Preparation of new or old wooden surfaces of any description and girth, not otherwise described and treating with creosote completed. |
| 20 | M & L in repairs for random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:6, all as specified and directed. |
| 21 | All as per above item No 20 here in before but except stone |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/any type of frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed. |
| 23 | M&L for flush pointing to random rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and as directed. |
| 24 | M&L for raised pointing to random rubble or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and as directed. |
| 25 | Dismantling of asbestos cement sheets any corrugation including ridge as in roof covering complete all as specified and directed. |
| 26 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified and directed. |
| 27 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutters etc. fixed with self tapping screws as specified and directed. |
| 28 | S&F for expanded metal, n exc 4kg per Sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complet all as specified and directed. |
| 29 | Taking down cement or cement lime plaster of any description from stone/ brick or concrete surface of wall/ ceiling etc including racking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 30 | M&L rendering 15mm thick in CM 1:6 on fair faces of brick/ stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | Material and labour for rendering 15mm thick (in two coats of 10mm under coat and 5mm plaster) on fair faces of brick work/ stone or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement for both coats mixed with integral water proofing compound at the rate of 3% by weight of cement all as per manufactures instructions incl necessary scaffolding etc for any height complete all as specified and directed. Note: water proofing compound will be measured and paid seperately. |
| 32 | Supply only Integral water proofing compound of make IMPERMO/ ACCOPROOF complete all as specified and directed. |
| 33 | Taking down timber roof trusses clear span above 4m & up to 8m, coupled rafters or truss beam complete all as specified and directed. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed. |
| 35 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) but exceeding 1.5Sqm and not exceeding 4.00Sqm each complete all as specified and directed. |
| 36 | S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, framed, rebated on the sloid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 37 | S&F 35mm thick factory made 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12mm thick timber flat on both sides of veneered particle board medium density BWP confirming to ISO 3097 exterior grade solid core with commercial face veneers both face supplied and fixed to chowkats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 38 | S&F second class hard wood factory made glazed and skeleton door/window shutter 35mm thick, open rebated and prepared to receive glass, gauze ect divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I 1991 section 8 clause 8.20 (b) complete all as specified and directed. |
| 39 | M&L for preparation and treating ends of posts, back of chowkats etc area of tarred exc 0.10Sqm but n exc 0.50Sqm complete complete all as specified and directed. |
| 40 | M&L for preparation and treating small articles area tarred n. Exc 0.10 Sqm each such as hold fast end of post, back of chowkhats complete all as specified and directed. |
| 41 | S&F sheet glass ordinary quality 4mm thick and glazed with oil putty or fixed with beads in square n exc 0.50 Sqm in each pane complete all as specified and directed. |
| 42 | Supply and fix butt hinges 100mm long medium weight, cold rolled mild steel of approved quality with ISI mark complete all as specified and directed. |
| 43 | Supply and fix butt hinges 75mm long medium weight, cold rolled mild steel of approved quality with ISI mark complete all as specified and directed. |
| 44 | S&F Alu. Anodised barrel tower bolts 150mm long extruded section complete all as specified and directed. |
| 45 | S&F Alu. Anodised barrel tower bolts 75mm long extruded section complete all as specified and directed. |
| 46 | S&F Alu. Anodised handle 150mm long extruded fabricated type complete all as specified and directed. |
| 47 | S&F Alu. Anodised handle 75mm long extruded fabricated type complete all as specified and directed. |
| 48 | M&L preparation of new or previously untreated, wooden surface of any description, not otherwise described over 10cm width or girth an applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 49 | S&F mild steel frame work confirming to FE 290 Gde-E-165, such as grill gratings etc. With ends of bars shouldered and rivetted or forged in to spikes, framed guard bars and similar work complete all as specified and directed. |
| 50 | Cutting holes in brick/stone/concrete walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast n. Exc half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 51 | S&F mild steel flat iron as in hold fast 25x6mm confirming to FE 290 Gde E-165 complete all as specified and directed. |
| 52 | M&L for preparation of newly plastered surfaces and applying three coat of white wash on wall complete all as specified and directed. |
| 53 | M&L for preparation of old platered surfaces including corners etc by brooming down or steel wire brushing and applying one coat of white wash on walls complete all as specified and directed. |
| 54 | M and L for one coat of cement base paint (plain) over old decorated / unplastered surfaces of walls of any description including preparation of treated plastered / unplastered surfaces complete all as specified and as directed. |
| 55 | M and L preparation of newly plaster surface on external wall surfaces and applying two coats of cement base paint over over a coat of primer complete all as specified and as directed. |
| 56 | Dismantling of timber scantling 40 Sqcm and over in section, in any position fillet, rails, posts, rafters, purlins etc in unframed works complete all as specified and directed. |
| 57 | Dismantling of timber fillet under 40 Sqcm in section, in any position fillet, rails posts, rafters, purlins etc in frame works complete all as specified and directed. |
| 58 | Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed. Note: 1. For demolition, power for drilling machine will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting |
| 59 | M&L for PCC 1:3:6, 75mm thick type C2 as in plinth protection complete all as specified and directed. |
| 60 | M&L for cement concrete 1:2:4 type B1, (20mm graded aggregate) as in copings, cills, sesmic and similar bands, plinth courses, string courses, lacing courses, parapet etc. Including weathering, slightly roundede or chamfered angle and throating and use of formwork complete all as specified and directed. |
| 61 | Cutting holes into or through brick/ stone walls built in cement mortar or cement lime mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required of superficial area exceeding 150 Sqcm but n exc 400Sqcm complete all as specified and directed. |
| 62 | M&L for rolled mild steel section as in main and cross beam, hip and jack rafter, purlins, brackets, extentions for rafters fixed on wooden members for fixing galvalume sheet where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates,Fe-290 (Gde E-165) including drilling, cutting,bolting, welding etc. complete all as specified and directed. Note applicable for each item: 1. For cutting, drilling, welding etc machine will be supplied by mobile generator on own arrangement by contractor 2. Wastage of time for TFF issue from ISO/Fire station (as usage of generator involved) may be considered while quoting |
| 63 | Supply and fix in repair of aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 300mm size complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
