Municipal Copr Of Greater Mumbai-MCGM has published Improvement Of Audio Visual System Along With Various Allied Work To Be Carried For Upgradation Of Dr. Sen Hall At Cvtc Building In Kem Hospital.. Submission Date for this Tender is 01-03-2024. Audio Video Equipment Tenders in Mumbai Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Active LED Videowall P.2.5 16 x 9 Ft- Size of Video wall (In Metre):16 feet x 9feet(+/-2%),Pixel Pitch of Video Wall:2.50 mm or Lesser,Environment:Indoor,Video wall Resolution Required:1920 X 1080 or Better,AcceptedBrands :Christie/Samsung/Barco, 4K/UHD Support for LED player:Should Support UHD from Day 1 with single LED player,PixelConfiguration:SMD 3-in-1 (1R1G1B), LED Configuration:1 Red, 1 Green, 1 Blue Brightness :>/=800 nits,Contrast Ratio:4,000:1 or Better, |
| 2 | Non-Interactive Display --65" - Resolution- 3,840 x 2,160,Brightness(Typ.)- 350nits, Panel technology - VA/IPS,Native Contrast Ratio(Typ.)- 4000:01:00, Viewing Angle(H/V)- 178:178, Response Time- 8ms or less, Operation Hour- 16/7, Speaker Type- Built in Speaker (10W x 2), Ports: VIDEO Minimum HDMI -3, USB-2, CONTROL- RS232C(in/out), RJ45, Wifi Supports Built in Wifi dual Band Support (2.4 GHz & 5Ghz), Bluetooth- Required, Certifications- CE,FCC,UL,BIS, Power Consumption (Typical)- 125 watt or lesser, Operating Temperature- 0?~ 40?,Humidity- 10~80% |
| 3 | Digital Smart Interactive Podium, Display: Size - 21.5 Inches, Screen Type - IPS, Resolution - 1920x1080, Refresh Rate - 60Hz, Color Dept - 24bits(16.7M), Touch Technology - P-Cap + EMR, Capacitive Touch Points - 10 Points, EMR Touch Points - Stylus/Finger, Touch Acurracy - 0.5mm, OS -Windows10, intel 8th Generation, 8GB RAM, 128GB SSD, Output - HDMI 1, Audio -1, USB - 1, AC in - 1, DC in 1. |
| 4 | Interactive Display of 55" along with Trolley - Diagonal Size: Intractive panel 55 inch, Resolution: 3,840 x 2,160, Brightness(Typ.)- 350nits, Native Contrast Ratio(Typ.) - 4000:1, Viewing Angle(H/V) - 178:178, Response Time - 8ms, Operation Hour - "16/7, Operating Life - "50000 hrs MTBF, Speaker Type - Built in Speaker (10W x 2), Ports - Video -HDMI 1, Touch Out: Minimun touch out 1, Control - RS232C(in/out), RJ45, Wi-FiDirect/ Ease of Viewing - Display must have Direct Viewing of PPT,word,pdf,images & Videos from pen drive |
| 5 | Supply, Installation, Testing & Commissioning Two way pendant speaker with 4.5" LF transducer & 0.75 inches dome tweeter. Frequency Range: 65Hz - 20kHz, Wattage: 30watts/ 22 volts (rms), Sensitivity: 87.9dB, Coverage: 150° conical, Max Peak SPL: 108dB,Impedance: 16 Ohms, Transformer Taps:70V - 30W/15W/7.5W/3.75W, 100V-30W/15W/7.5W. Enclosure Material: Impact Resistant ABS. Grille Fixture Type: Quick fix with magnets. Shall include all mounting accessoriesApproved Brands : QSC/Martin Audio/D&B Audiotecknic |
| 6 | Supply, Installation, Testing & Commissioning of 4 channel class-D amplifier with 60 watts/channel into Low-Z loads.4 channels can also be bridged in pairs, each pair providing up to 100 watts rms into 4 /8 ohms or 125 watts rms into 70V/100V. Signal to Noise (A weighted, 20 Hz-20 kHz)->100 dB, Frequency Response-20 Hz - 20 kHz, Input Sensitivity-1.23 Vrms (+4 dBu), Input Impedance->10 kO (balanced), >10 kO (unbalanced), Front Panel Indicators-Power, per channel Signal, per channel Protect/Limit,Controls- 4O/8O/70V Bridge Highpass On/100V Bridged Highpass on per channel pair. Size half RU.Mounting hardware includedApproved Brands : QSC/Martin Audio/D&B Audiotecknic |
| 7 | Supply, Installation, Testing & Commissioning ofaudio, video and control processing system, Up to 8 assignable and routable AEC processor instances, , VOIP for telephony, USB-B port and USB - Cfor AV-USB Bridging and configurable up to 8x8 channels. 64x64 Network Audio channels (AES67/Dante), Input Frequency Response-20 Hz to 20 kHz @ +24dBu +0.05 dB / -0.5 dB,Input Impedance (balanced)-7.2k ? nominal, Input Sensitivity Range (1dB Steps)- --39 dBu minimum to +24 dBu maximum, A/D – D/A Converters - 24-bit, Sampling Rate-48kHz, Output impedance (balanced) 332 ?, Output Dynamic Range-> 108dB,Inbuilt 16 Multitrack Player capacity. Control and integrate external devices using TCP/IP, Dual RS232 and GPIO. Shall include all mounting accessories.. Add External control processor to fullfil the requirementShall include all mounting accessories.Approved Brands : QSC/Biamp/Symmetrix |
| 8 | Supply, Installation, Testing & CommissioningDante 16x16 Channel License, Perpetual or add card to incorporate dante channels |
| 9 | Supply, Installation, Testing & Commissioning of network audio peripheral converting 4 analog Outputs from networked audio. Up to 4 devices daisy-chainable. 1U-1/4W, powered over Ethernet or +24 VDC. Surface mountable, rack kit sold separately. Approved brands: QSC/RDL/Audinate. |
| 10 | Q-SYS Core 8-Flex/ Nano Scripting Engine Software License, Perpetual |
| 11 | Supply, Installation, Testing & Commissioning of 4K60 4:4:4 Network Video Endpoint, software configurable as Encoder or Decoder. Minimum 3 HDMI 2.0 Inputs & Minimum 2 HDMI 2.0 Outputs with 1080p or 1 x HDMI output with 4K 4:4:4 fully compliant with HDCP 1.4 and 2.2. USB Inputs: Type B USB Input: For Web Conference integration, delivering video feeds from PTZ-IP conference cameras and audio feeds from host PC for web conference applications. Audio Inputs: 1 x Mic/line input on a 3.5 mm TRS connector for PC-Level audio input from a microphone or media player. Analog Audio Output: 1 x Line ouput on a 3.5 mm TRS connector to external loud speakers/ Audio recorders. Simultaneous streaming capabilities from all Inputs. Control: RS-232 & GPIO ports with 3 Pin euroblock terminal for control of third party devices. Power - PoE 802.3bt Type 4 and 48 V DC Nominal, 1.5 A on 2-pin Euro connector. Shall include all mounting accessories. Approved Brands :QSC/Crestron/Extron |
| 12 | Supply, Installation, Testing & Commissioning of Network PTZ Conference camera with Min 20x optical zoom & 60 degree horizontal coverage. HDMI resolutions up to 4K @ 25, 29.97, 30 fps . Image rotation controls to allow for inverted mounting using ceiling bracket. Auto exposure, auto focus and auto white balance modes. Low Noise CMOS Image Sensor, S/N Ratio = 55dB. , Video Outputs-HDMI and 3G-SDI,Ethernet-100BaseTX / 1000BaseT. Simultaneous IP Streaming, HDMI and 3G-SDI outputs. Power over Ethernet (PoE, 802.3af). Minimal Illumination: 0.5 lux at F1.8 (AGC On). S/N Ratio = 55dB.Video Resolutions HDMI / SDI:1080p 60/50/30/25. Shall include Wall mounting accessories.Approved Brands :QSC/Sony/Vaddio |
| 13 | Supply, Installation, Testing & Commissioning of Network PTZ Conference camera with Min 12x optical zoom & 80 degree horizontal coverage. HDMI resolutions up to 4K @ 25, 29.97, 30 fps . Image rotation controls to allow for inverted mounting using ceiling bracket. Auto exposure, auto focus and auto white balance modes. Low Noise CMOS Image Sensor, S/N Ratio = 55dB. , Video Outputs-HDMI and 3G-SDI,Ethernet-100BaseTX / 1000BaseT. Simultaneous IP Streaming, HDMI and 3G-SDI outputs. Power over Ethernet (PoE, 802.3af). Minimal Illumination: 0.5 lux at F1.8 (AGC On). S/N Ratio = 55dB.Video Resolutions HDMI / SDI:1080p 60/50/30/25. Shall include Wall mounting accessories.Approved Brands :QSC/Sony/Vaddio |
| 14 | Wireless Presentation |
| 15 | Supply, Installation, Testing & Commissioning of Cable Manager for Table. Connectivity - 1xUSB, 1x HDMI, 2xGigabit LAN,2xUniversal Power Socket. Complete with all required accessories. |
| 16 | Supply, installation, testing & commissioning of ceiling microphone with patented beamforming technology ,Optimize your digital workflows with software. The microphone can be easily controlled and monitored from anywhere in the corporate network. For 100% connectivity. |
| 17 | Mounting Accessories-Connect the microphone via analogue or digital DANTE™ audio outputs to any conference system. Power-over-Ethernet (PoE) makes integration of the ceiling microphone very easy. An open media control protocol (API) allows you to make individual adjustments. With 28 pre-polarized condenser capsule.1 x 3-pin terminals (Phoenix contact MCVW 1.5-3-ST-3.81); 2 x Digital Dante Network Audio (RJ45) with in-built voicelift feature |
| 18 | SITC of wireless hand held microphone with cardiod polarity pattern, true diversity receiver, Frequency range: 470 - 516 MHz , 516 - 558 MHz , 734 - 776 MHz, THD, total harmonic distortion = 0.9 % ; Signal-to-noise ratio = 110 dBA; Switching bandwidth up to 42 MHz; Nominal deviation ±24 kHz ;Modulation Wideband FM ;Current consumption 300 mA ;Adjacent channel rejection Typically = 65 dB; Intermodulation attenuation Typically = 65 dB; Receiving frequency Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels; RF sensitivity< 2.5 µV for 52 dBA eff S/N; OEM should have authorized service centre in India |
| 19 | SITC of wireless head worn microphone of Frequency range: 470 - 937,5 MHz; THD, total harmonic distortion: = 0.9 %; Signal-to-noise ratio: = 110 dBA; Switching bandwidth:up to 42 MHz ;Peak deviation: ±48 kHz ; Nominal deviation: ±24 kHz ;Modulation: Wideband FM; Current consumption:300 mA; Adjacent channel rejection: Typically = 65 dB ;Intermodulation attenuation: Typically = 65 dB; Receiving frequency: Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels; RF sensitivity:< 2.5 µV for 52 dBA Receiver Principle: True diversity; Blocking: = 70 dB; OEM should have authorized service centre in India |
| 20 | SITC of pre-polarized condenser gooseneck microphone with an overall length of minimum 450 mm and with XLR3M-type connector at its base, which shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA or better with table stand for connecting and operating XLR gooseneck microphones shall be rugged and unobtrusive with XLR-3F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better |
| 21 | Supply, Installation, Testing & Commissioning ofpassive directional antenna is the perfect addition for enhancing the wireless performance of your Digital system.,Gain typ. 5 dBi, Impedance 50 O, Connection BNC female, no DC path, The ?" and ?" threads make it easy to mount on any mic stand .OEM should have authorized service centre in India |
| 22 | Supply, Installation, Testing & Commissioning of Active Antenna Splitter for use with Wireless Digital systems with Antenna splitter 2 x 1:4 or 1 x 1:8, active , Gain in A – out A: 0 ± 1 dB in A – out A1 ... A4: 0 ± 1 dB in B – out B1 ... B4: 0 ± 1 dB, Impedance 50 O , Reflection loss 10 dB (all RF outputs), Supply for receivers at A1 to A4 DC 12 V Typically 350 mA, max. 500 mA. OEM should have authorized service centre in India; |
| 23 | Supply, Installation, Testing & Commissioning of 7” PoE, IPS Touch Screen Controller with 16 million colors for In-Wall Mounting. Resolution-1280x720, Brightness-400 Nits, Panel Orientation-Vertical / Horizontal,POE- IEEE 802.3af class 3, Aux power PSU-+24VDC @ 0.5A , LAN -1000Mbps full-duplex RJ-45,Universal mounting accessories included. Drag & Drop designing Approved Brands :QSC/Crestron/Extron |
| 24 | Table top mounting accessory for TSC-70-G3Approved Brands :QSC/Crestron/Extron |
| 25 | Q-SYS Core 8-Flex/ Nano UCI Deployment Software License, Perpetual |
| 26 | 24 PORT GIGABIT NETWORK SWITCH with Licenses for 5 Years |
| 27 | 2.4/5 GHz Wirless Acess Point with MiMo Technology & Licenses For 5 Years |
| 28 | Security Appliance for Bandwidth Termination and Network Security &Licenses for 5 Years (100-150 MBPS) |
| 29 | Supply, Installation, Testing & Commissioning of 18Gbps HDMI Cables. |
| 30 | Supply, Installation, Testing & Commissioning of 2 core 2.5 sqmm PVC Sheathed loudspeaker cable. |
| 31 | Supply, Installation, Testing & Commissioning of 2 core shielded balanced microphone cable. |
| 32 | Fibre Optic Cable |
| 33 | CAT 6 Copper Cable |
| 34 | Smart Rack for AV System (42 U & 22u) |
| 35 | HINKHUB Collaboration Device with 4K HDMI Outputs, 4 HDMI Inputs, 2 Touch Controls & Soft VC Integration - Interactive Canvas expands 20 times the surface area of the physical touchscreen - Wireless device sharing supports macOS, iOS, Windows, Android, Linux - Annotation toolset to annotate anything on the Canvas, including live feeds - Built-in Apps Web Browser, Notes, Sketches - Flies Can be saved or opened from the controller (Image, PDF, Videos) - Easy Content Sharing share content from a USB on the fly, or select from integrated network drive or cloud server - Quick Start no session prep required - just tap the display and go, intuitive interface means zero to little training required - Multiple remote users able to view and collaborate on the canvas with Unlimited User License - Multitouch Collaboration System with perpetual license - Touch Control support on Wireless Sharing windows & Mac |
| 36 | P Multicast UHD Video Transmitter over 1Gb Network, Bi-directional IR, RS-232 & USB / KVM, PoE, Analogue Audio Embedding, Analogue Audio Breakout, HDCP 2.2 - 100 Meters |
| 37 | IP Multicast UHD Video Receiver over 1Gb Network, Built-in Video Scaler, Video- wall mode, Bi-directional IR, RS-232 & USB / KVM, PoE, Analogue Audio Breakout, HDCP 2.2 - 100 Meters |
| 38 | Advanced Control Module for TCP/IP, RS-232 and IR control of Blustream IP200UHD, IP250UHD & IP50HD Multicast systems |
| 39 | Real-Wear Doctor Real-time communication and tranmission device along with all acessories |
| 40 | Light /Fan / Ex. fan Points |
| 41 | 2/3 Pin Independent Plug (IP) |
| 42 | 15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse andIndicating Lamp, One 15 Amp SP Switch |
| 43 | 5A/6A - 3/5 Pin Plug On Board |
| 44 | 24W LED Fitting |
| 45 | 45W (600x600) |
| 46 | LED Spot Light |
| 47 | Pedestal fan of 450mm sweep |
| 48 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20 x 12 mm (1/2") |
| 49 | Wiring for submains- casing n cap – 2 X 6 sq. mm + 1 X 6 sq. mmearth wire in 25 x 12 mm ( 3/4 in) |
| 50 | 250A TPN MCCB |
| 51 | 1st category Cu armoured cables FRLS outer sheathed- 4C x 4 Sq.mm |
| 52 | 1st category Cu armoured cables FRLS outer sheathed- 4C x 16 Sq.mm |
| 53 | 1 st category Al armoured cables FRLS outer sheathed- 3.5C x 150 Sq.mm |
| 54 | Cable End Termination For Copper Cables – 4C x 16 Sq.mm |
| 55 | Cable End Termination For Aluminium Cables – 3.5C x 150 Sq.mm |
| 56 | Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope |
| 57 | Earthing Continuity Conductors -25 x 3mm GI |
| 58 | Earthing Continuity Conductors -Bare G.I. Conductor size 10 SWG |
| 59 | Supply, Installation, testing, commissioning, performance demonstration of 2 KVA UPS true online with 1 phase input, 1 phase output with back up batteries for 2 Hours backup along with rack & connectors. |
| 60 | SITC of 100W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 45°,Power Consumption 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse & Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX , Black powder coated body.RDMControloptionswithlatesttechnologyCertificationhavingBIScomplianttoIS 10322 (Part 5/ Sec 1):2012CE ertification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. |
| 61 | SITC of 200W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 , Strobe optionAdjustable1~25times/SecVariable,BeamAngle30DegreeTotalPower Consumption of 420W 11.7KHz Refresh Rate,In built preset’s for effects Fuse and Internal safety protections,Active Cooling with Low Noise Fan, 5 Pin XLR for DmX,High quality well designed inbuilt reflector, Flicker Free 100% for Tv & Film Cameras, Black finish housing, IP20 protection,HavingStrobeoptionandsmoothdimming,illuminateStagewithuniformlight intensity levels. RDM Control options with latest technology certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certificationcompliant to EN60598-1:2015, EN61437-2- 13:2014LM79 Certificates from NABL Acrediated laboratory. |
| 62 | SITCof54x3WLEDParLightRGBW,BeamAngle25°completewith LEDsourcefrom Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming , In built presets for different colorsStrobeMode20times/SecDataDmXthrough3/5PinXLR’s65dB~130dBSound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coatedBlack finish housing Having Sound Control & Master Slave Auto Run Mode Illuminatethe IndoorstagewithunlimitedcoloureffectsRigidlybuiltpressuredie-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant toEN60598-1:2015,EN61437-2-13:2014 LM79CertificatesfromNABLAcrediated laboratory.Brand embosed impact on the light body for genuine product |
| 63 | SITCof300WLEDZoomProfileSpot19DegreeLightcompletewith,3200KCCTColour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95,Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficientandwell-designedLampreflectorEfficientCoppertubebasedHeatSinkfor Heat DissipationSleekandUniqueDesignedLightweightbodyFixtureprovidedwithYokeof Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS10322(Part5/Sec1):2012.CECertificationcomplianttoEN60598-1:2015,EN61437-2- 13:2014LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product |
| 64 | SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD |
| 65 | SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip |
| 66 | SITCofMotorizedMainCurtainSystem12MtrsstraightWideflyuptype.Thismechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%,MTG:B5,AMP:2.7Y,Volt:415v,DEBRG:62052Z,DUTY:S1,FREQ:50Hz,NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaftMadeupofITrackforcompletelengthCurtainholdingtrollieswithballbearingfor smoothernoiselessmovement2wheelertrolleyplaceduniformlyatspecificintervalof 200mm/250mmthroughoutthetrackMotorCableterminationboxTrolliesuniformly distributed along the track at every Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated |
| 67 | SITC of Power Distribution Electrical panel having a Incomer of 40A & 25 Way 10A SP MCBs Floormount/rackmount/wallmount.Miniaturecircuitbrakersofsinglepolesshallbe fixedofdifferentratingsfrom6/10/16/25Aasperthelightingfixtures.Wiringinsidethe module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130 All welding slag grounded off and welding pits wiped smooth with plumber metal.Power panels shall be designed in sucha way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius.Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Nuetral separation made using incomerofL&TorSchneidermake,Voltmeter,Ammeterdisplayforreadingvisualization Individual MCB control for 43 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade, aluminum/copper conductor PVC insulated and sheathed, armoured cable andshallbesuitableforconnections.Providedwithiveryconnectorsfortheinternal terminationsand external outgoing connecting points Custom built as per specification and project requirement. |
| 68 | SITC of Fixed FOH Lighting bar/winch of 10 Mtr length constructed with an dual contruction lightbarwithanMildSteel40NB48ODblackmattfinishwithansupportingflatpattiof height 200mm x 50mm x 6mm thickness for theAdded support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coatedwithMattblackTextureFixingThroughSuspendersaspersiteconditionsDual Construction and an additional End Caps on the Pipe end shall be thereLight bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures |
| 69 | SITC of Fixed Lighting bar/winch of 10 Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for theAdded support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coatedwithMattblackTextureFixingThroughSuspendersaspersiteconditionsDual Construction and an additional End Caps on the Pipe end shall be thereLight bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures |
| 70 | SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems |
| 71 | SITC of MS Angle 40X5mm to create basic supports Customized design. All the materials under gone through 7 tank process with various chemical treatmentto keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint. |
| 72 | SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm )Total Max Rating 10A, 250V A.C20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable sizefitted withPowerconor IECconnectorBox10A.Clamp arrangementfor fixingor Raul plug arrangement for wall / floor fixing |
| 73 | SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection& electromagneticshieldingBlackpowdercoated,fibreglandsofsuitablesize fittedwith5PinDmXXLRFemalesocketClamparrangementforfixingorRaulplug arrangement for wall /floor fixing |
| 74 | SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection&electromagneticshieldingBlackpowdercoated,fibreglandsofsuitablesize fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing |
| 75 | SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size. |
| 76 | SITC of FRLS Copper unarmoured Flexible cable having 7 Core each of 1.5 Sq mm |
| 77 | SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal. |
| 78 | SITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 7 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button,Emergency trip, RYB indicators, Supply Indictor and necessary meters operated wireless smart working functianailty for the motorisedlightbarsshouldbetherewithoneneutral&phaseconnectionslotsandwith2 vertual load terminals. For each motor unit one each switch units should be installed inside thecontrolpanelswhichcanbecontrolledwithourmobiles,touchpadsonlywiththe internetconnection.Motorcontrolpaneldulypowdercoatedwithashgreypainttexture finish with all required safety features |
| 79 | SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8 Isolated outputs,Slow blow safety fuse 5 Pin XLR for output interface, Dual mode to select 2 universe operation, DmX Inputthrough5PinXLR Connector,ControlProtocolRDM andDMX 512Powder coated compartment finish Mounting brackets for grid mount. |
| 80 | SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ),Total Max Rating 10A, 250V A.C 20°C to +70°C Operating TempMoldings: Nylon, Flammability Rating UL94V-0Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing |
| 81 | SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x40mm&1.6mmthicknessundergonethrough7tankprocesswithvariouschemical treatment to keep them rust free with perforation for heat dessipation provided with lid. |
| 82 | Hardwares and additional accesstories like Pipe clamps, Brackets, Number Plates 1 to 25 etc |
| 83 | SITC of Fixed Wing Structure designed as per site condition for a height approx 5Mtr x 1.5Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4- Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. |
| 84 | SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gatheringof0%stitchedaspersitecondition,curtainprovidedwitheyeletsatevery 200/250mm for uniform fixing. (For Wing)5 Mtr x 1.5Mtr |
| 85 | SITCofHighqualityVelvetfabricfireretardanttreatedasperapprovedcolourandmake with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size: 1Mtr |
| 86 | SITC of DmX Male Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections |
| 87 | SITC of DmX Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections |
| 88 | SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing |
| 89 | GI Pipe 100 dia |
| 90 | GI Pipe 80 mm dia |
| 91 | GI Pipe 65 mm dia |
| 92 | 50mm nominal dia |
| 93 | 40mm nominal dia |
| 94 | 32mm nominal dia |
| 95 | 25mm nominal dia |
| 96 | Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction and quality conforming to international standards and listed by LPC (formally FOC U.K.) U.L./F.M. of USA or approved and listed by Tariff Advisory Committee (TAC) OF India |
| 97 | Supplying and erecting 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb upright sprinkler having 68° C fixed temperature rating with deflector disc of conventional construction and quality conforming to international standards and listed by LPC (formally FOC U.K.) U.L.F.M. of USA or approved and listed by Tariff Advisory Committee (TAC) OF India |
| 98 | Providing & fixing of Stainless steel corrugated flexible pipe(hose)for dropping sprinklers below false ceiling, pipe shall be 16 barpressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as required. |
| 99 | Providng and fixing in position sprinkler guards to protect open sprinkler in basement from mechanical damage/ Rosette Plate |
| 100 | Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 100 mm Ring Main of Fire Fighting System |
| 101 | Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, of 1620 LPM (Litres/min.) at 56m centrifugal type pump |
| 102 | Supplying installing, testing, commissioning of Jockey Pump of240 LPM at 56 m head, Nos |
| 103 | Supply, Installation, testing & commissioning of addressable 2loop main fire alarm electronic control panel, expendable up to4 loop & having maximum 250 devices (any combinationdetectors plus devices) per loop & Audio/ Visual alarmcomplete as per IS: 2189 specification - modular type front operated with interlocking door arrangement totally encloseddust and vermin proof for indoor type applications. |
| 104 | Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0- 14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc |
| 105 | Butterfly Valve:100 mm dia |
| 106 | Butterfly Valve:80 mm dia |
| 107 | NRV 100 mm dia |
| 108 | NRV 80 mm dia |
| 109 | cast iron foot vallve 100 mm dia |
| 110 | cast iron foot vallve 80 mm dia |
| 111 | Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories |
| 112 | Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification |
| 113 | Providing and fixing in position 2 lengths of 15 M long controlled percolation hose reels 63 dia with adapter, branch pipe and nozzle and stroking them in metal cabinets with lockable glass shutters and fixing the metal cabinet at ground level in a location where it can be easily spotted including painting etc |
| 114 | Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour |
| 115 | Supply Stainless steel branch pipe of 63 mm dia. Fitted with 20mm dia. Nozzel ISI markes IS 903 complete in all respect |
| 116 | Supplying and erecting one no. Brass orifice plate having 6 mm. thickness, 140 mm outer dia of 140 mm at every single outlet hydrant valve |
| 117 | Providing and fixing in position 4 nos. 65 dia breaching inlet near the building compound wall for connecting to fire fighting tank. |
| 118 | Supplying and installing fire brigade Header (Siamese Connection) of 150 mm Ø for supplying water to wet riser system as per specification |
| 119 | Supplying and installing Air Vessel of 300 mm Ø 1.5m in height M.S. tank installed inside pump house as per specification |
| 120 | Supplying & installing moulded HDP / Fibre water tank. for -ve suction only, having capacity 1000 ltrs.fitted with necessary accessories complete as per specification |
| 121 | Providing and fixing in position 25 dia gun metal drain valve at the bottom of the wet riser including necessary length and pump Room |
| 122 | Supplying and erecting 20/25mm Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification |
| 123 | Supplying and installing pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification |
| 124 | Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on Wall. |
| 125 | Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 9 kg capacity with necessary clamp for erection on Wall |
| 126 | Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook. |
| 127 | Supplying and erecting Wall hook 225mm projection for keeping fire buckets made out of 15 mm dia. M.S. Rod grouted in wall to a depth of minimum 15cms |
| 128 | Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver Paint. |
| 129 | Providing and fixing in position I.S.I. mark CO2 Type Fire extinguisher of 4.5 kg. capacity. |
| 130 | SITC of Auto glow signage for Emergency Fire Exit |
| 131 | SITC of Auto glow signage for Staircase direction |
| 132 | 2 nd category Al armoured cables FRLS outer sheathed- 3C x 35Sq.mm |
| 133 | Supply, Installation, testing & commissioning of addressable 2 loop main fire alarm electronic control panel, expendable up to 4 loop & having maximum 250 devices (any combination detectors plus devices) per loop & Audio/ Visual alarm complete as per IS: 2189 specification - modular type front operated with interlocking door arrangement totally enclosed dust and vermin proof for indoor type applications |
| 134 | Supply, Installation, testing & commissioning of expandable Loop card for main fire alarm electronic control panel, shall support 254 devices both detectors and modules and shall support both class "A" & class "B" wiring |
| 135 | Supply, Installation, testing & commissioning of conventional optical type smoke detector complete on box as per Specification |
| 136 | Supply, Installation, testing & commissioning of conventional Manual Call Point (Pill box) with break glass push button in metal enclosure complete with back mounting box. |
| 137 | Supply, Installation, testing & commissioning of conventionalHooters with CRCA enclosure complete with external power supply & junction boxes. |
| 138 | Supply, Installation, testing & commissioning of Isolator Module along with mounting box & termination glands |
| 139 | Supply, Installation, testing & commissioning of Addressable control Relay module with required accessories along with junction box, glands and terminators ( For AC trip off, Access trip off, PA system, sprinkler flow switch, lift interface, sounder,fire fighter & telephone jack) |
| 140 | Supply, Installation, testing & commissioning of conventional four wire single ended Reflected type Beam smoke detector. The range of smoke detector shall max 164 feet, Shall include the required power supply, junction box & Mounting bracket. |
| 141 | Supply, Installation, testing & commissioning of 2Cx1.5 sq.mm armoured RED color copper FRLS cable with necessary saddles, screws, junction boxes, sleeves, elbows couplings etc. for Fire alarm System |
| 142 | Treatment Of Accoustic,Snazz Cosmos Panel in Ceiling: Supply & installation of Snazz Cosmos Panel , made of GFR Gypsum , plaster finish, of size of1200 x 2400 x 12.5 (mm) with Seamless, true continuous finish with no joint bands (square edge), Variable acoustics (8/15/20mm) for broadband sound absorption, volume density of base board 800 (Kg/m cubic), weight 9Kg/m2 installed by using Anutone Strut framework system. The Anutone Strutframework system shall include Anutone Strut CC10 thickness 0.55mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened to the wall positioned vertically at every 600mm centres. Anutone Strut CC18,aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & center brackets is then fixed perpendicular to the Strut CC10 with the help of fasteners at every 400mm centers Anutone Tufbloc Anutone Snazz Cosmos in then fixed perpendicular to Strut CC18 with suitable edge & centre brackets. |
| 143 | Wall Panelling in Plywood with laminate of Veneer & Lacquered Glass of 2100mm on entire periphery of Auditorium : Supply & installation of 12mm thk marine Ply Wood, with 4 mm thick Veneer laminate of 450mm band at bottom and 150mm band at top and in between 4mm thick laquered glass upto height of 2100mm.Laquered glass panel to be fixed on 12mm ply with all side bidding with 10mm groove and lacqured glass size of 1600 mm max height and width varrying from 500 to 1200 depending upton the panel size fitment Complete installation to be done by using12 mm thick marine ply with ss screw rowlplug required marine adhesive as per groove pattern or design suggested by Archetect as per detailed drawing and as direct by engineer incharge. |
| 144 | Melamine Polish Treatment for Veneer Wall Paneling and Wooden Door Framing: Proving and applying first quality metalic transparent PU Coating of approved make and shade on plywood or veneer whereverrequired with sand papering & cleaning the surface , applying one coat of primer and lambi/putty including wood filer to full surface 3 times, thereafterpolishing the surface in two fininshing coats over base primer coat to acheive even finish all complete as per instructions of Engineer in charge. |
| 145 | Accoustical Anutone Slats Surco Plus for Wall Cladding Above 1.2 Metre : Supply & installation of Anutone Slats Surco Plus, made of pinewood E1 grade fiberboard, melamine laminated finish, groove slats L8-2 - (2mm grooves @ 8mm centers with 52% open area) / L16-2 - (2mm grooves @16mm pitch with 27% open area) / L32-2 - (2mm grooves @ 32mm centers with 15% open area) / L64-2 - (2mm grooves @ 64mm centers with 8% open area), backlined with Soundtexblack acoustical fleece of 0.27mm thick, surface density 63g/m2,tongue-groove edge for a seamless look, 5-test fire retardant grade, size 128 x2440x16mm, volume density of base board 700Kg/m3, weight 9Kg/m2 (L16), 10.5Kg/m2 (L32), 11Kg/m2 (L64) installed by using Anutone Strut framework system. The Anutone Strutframework system shall include Anutone Strut CC10 thickness 0.55mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened to the wall positioned vertically at every 600mm centres. Anutone Strut CC18,aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & center brackets is then fixed perpendicular to the Strut CC10 with the help of fasteners at every 400mm centers Anutone Slats Surco Plus of size 128x 2440x16mm in then fixed perpendicular to Strut CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 4.88m length wise and 4.992m width wise. The system is backlined with Anutone SynthPF 10x10 adhered on wall with dab spots of Anutone stick S7 adhesive. |
| 146 | Accoustical Flooring Carpet : Supply & installation of Carpet , made of yarn 100% Poly Propylene non woven form |
| 147 | Accoustical Doors for Auditorium: Description: Acoustic door’s are useful to control noise transfer from one room to other room / meeting room , Conference room , outside noise control, studio purpose , Cinema hall and at many other places. The wooden acoustic door will be with door frame and shutter, Single / Double leaf with Sound Transmission Class (STC) from 35 to 50 STC depending upton thickness of door panel and material utilized. ACCOUSTIC DOOR: – 55mm to 72mm thick sandwich type composite sound reducing flush door shutters. The combined assembly set of door frame and door shutters to be as per following details: (a)Door frame shall be of teak / hard wood of size – 110 mm X 100 mm, including making necessary grooves in the frame for fixing of hollow bulb type EDPM gaskets on rebates to block noise leakage from gap in between door frame and shutter. (b) The frame of shutter shall be made from 40 mm thick teak/ hard wood stiles and top & bottom rails of size 94 mm and core made of lock rail 100 mm wide and 40 mm thick and three additional strips 50 mm wide and 25 mm thick (minimum) (c) The core of door shutter shall be filled with acoustic insulation material , sound absorbing and damping material . (d) Face panels shall be of 12 mm thick Marine ply boards of approved make conforming to relevant IS codes / International Standards on both sides of the core of the shutter with required primer at the unexposed surface . One side of ply board shall be fixed to the core of the shutter along with a 5 mm thick Neoprene rubber sheet on its inner face. (e) 01 mm mica OR 04 mm thick Teak Veneer of approved make shall be bonded with 12 mm thick marine plyboard on both face of shutterby using high strength cross linked PVAC based adhesive . (f) Dropdown Seal: – Excellent quality range of Internal Automatic Dropdown Seal, which are manufactured from high grade quality raw materials. These Internal Automatic Dropdown Seal can be customized as per our precious customers specifications. These Internal Automatic Dropdown Seal are widely known for its durability and quality.Internal Automatic Dropdown Seal can be availed at industrial leading price. Resists sound upto 37db, air, insects, cold smoke, light. Designed for timber (wooden) doors. (g) Hardware- The door assembly shall be fixed to the door frame with heavy duty stainless steel hardware i.e. Door Lock, SS Bal bearing Hinges , SS door handle‘D’ typeback to back, SS Tower bolt |
| 148 | Push Back auditoriom chair for first 2 Rows : Auditiorium push back chair in metallic frame and comfortable cushion form with top cover of leather finish fabric push back chairs are semi reclining to 20 Degree to 25 degree and seat is movable on front and back UPVC arm rest with oak finish to be fixed on existing arm rest member chair to be resting on MS frame |
| 149 | Back push with tip up auditorium chairs : back push with tip up auditorium chairs to be fixed on MS frame and compfortable cusion form with top cover of leather finish fabric UPVC arm rest with oak finish to be finish to be fixed on MS arm rest member tip up seat return spring only for first two rows to be repaired |
| 150 | Granite Flooring, Trade & Riser Repair for parts : Supply and Installation of granite with nearest matching of existing granite andas directed by Architect. |
| 151 | Wall Panelling on existing Dado Tile on both side of main entrance to Auditorium : Supply & installation of 4 mm thick Veneer paneling of Approved Shade & Texture ( Group Match) As per Archetect Selection on Plywood or on Suggested hard surface with Marine adhesive. With ply paneling at required veneer fixing 12 mm thick marine ply with ss screw rowlplug required marine adhesive as per groove pattern or design suggested by Archetect as per detailed drawing and as direct by engineer incharge. |
| 152 | Fabrication of Wooden Steps to Stage: Framing in Sal Wood with 18mm thick Ply and top cladding with wooden flooring Size: Width 1.2 Mtr. X Trade Depth of 0.25 Mtr. X Riser Height of 200 mm |
| 153 | Railing At Main Entrance : Supply & Installation of SS Hand Rain at main Entrance fabricated with main rail of 40 Dia with 1 mm thick SS Pipe and intermediate pipe at 2 levels of size 25 Dia with matt finish and SS Stand |
| 154 | Window In Auditorium : Openable Accoustical Panel similar to accoustical door ofauditorium - window size - 1100 X 1950 mm - 7 nos. qty. |
| 155 | Wooden Flooring on Stage: To install the Sal Wood Bottom framing of wood bottom size of75 X 75 in the grid of 600 X 600 X 75 mm thick and on top of that to install 18mm thick water proof plywood.On top of 18mm thick Plywood, to install wooden flooring with 10mm thick cushion for acoustical effect. |
| 156 | MS Ladder and Ladder type suspended MS Structure of 600mm width for accessing lighting arrangement of Auditorium |
| 157 | Wall Cladding on Periphery wall of Change Rooms: To install 10mm thick Ply with laminate of 4mm thick Veneer with 10mm groove pattern as per Architect / Site Engineering instruction. To fix 10mm thick ply on wooden framing to clear wall undulation on existing civil wall and then to install Veneer laminate of 4mm thick on ply wood. To complete the installation with hardware including Screws, Adhesive and nails etc as per requirement |
| 158 | Wall Partition 100mm thick to be fabricated with Sal Wood Framing and on both 10mm thick Plywood with 4mm thick Veneer laminate from floor level upto 2.4m height.4mm Veneer laminate to have 10mm groove pattern as per architect/site engineers instruction. |
| 159 | Doors for Change Room: Description: 1200 x 2100 mm size Acoustic door’s are useful to control noise transfer from one room to other room / meeting room , Conference room , outside noise control, studio purpose , Cinema hall and at many other places. |
| 160 | Wooden Flooring: To install the Sal Wood Bottom framing of size 25 X 25 mm in the grid of 600 X 600 and on top of that to install 18mm thick water proof plywood.On top of 18mm thick Plywood, to install wooden flooring with 10mm thick cushion for acoustical effect. |
| 161 | Window In Change Room : Auditorium glass & aluminum window 1050 X 2050 mm |
| 162 | Painting Work On Wall & Ceilling Of Change Room: |
| 163 | False Ceiling in Acoustic Material with Grid Ceiling:To supply & Install Glass Reinforced Gypsum Acoustic Ceiling in 600X600 grid pattern with T24 GI Grid with Perforated Ceiling Panels |
| 164 | Dressing table with mirror of size1.7 Width X 0.55 Depth X 2.1Height.Dressing table to be fabricated in 12mm thick Ply with 4mm thk Veneer Laminate and Melamine Polishing. On both sides of full height mirror, to have drawers cabinets with 4 levels drawers of 150 mm depth with top table. of size 0.055 (W) X 0.5mm (D) and upto height of 700mm from FFL.On both sides of mirror, to laminate the ply panel with 4mm thick veneer laminate. On two sides of dressgin table, to have provision for LED Light mounting on top. Drawers to be mounted on soft close channels and lock & key and drawer handles. |
| 165 | Corridor Flooring : |
| 166 | Wall Panelling in Plywood with laminate of Veneer Band upto full height of 2.9 Mtr. along on entire periphery of Corridor: Supply & installation of 4 mm thick Veneer paneling of Approved Shade & Texture ( Group Match) As per Archetect Selection on Plywood or on Suggested hard surface with Marine adhesive. With ply paneling at required veneer fixing 12 mm thick marine ply with ss screw rowlplug required marine adhesive as per groove pattern or design suggested by Archetect as per detailed drawing and as direct by engineer incharge. |
| 167 | 35mm thick Ply Doors: Description: 35mm thick Door Ply to be cladded with Veneer on both side, including door handle with lock and hinges for door sizes a. For Corridor at the entrance beside lift - 1200 x 2100 mm b. For Wash Room Entry Door - 825 x 2100 mm c. For Storage Room - 900 x 2100 mm |
| 168 | Painting Work On Corridor Ceiling : |
| 169 | CeilingSize 15x15 :Supply & installation of Snazz Cosmos Panel , made of GFR Gypsum , plaster finish, of size of1200 x 2400 x 12.5 (mm) with Seamless, true continuous finish with no joint bands (square edge), Variable acoustics (8/15/20mm) for broadband sound absorption, volume density of base board 800 (Kg/m cubic), weight 9Kg/m2 installed by using Anutone Strut framework system. The Anutone Strutframework system shall include Anutone Strut CC10 thickness 0.55mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened to the wall positioned vertically at every 600mm centres. Anutone Strut CC18,aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & center brackets is then fixed perpendicular to the Strut CC10 with the help of fasteners at every 400mm centers Anutone Tufbloc Anutone Snazz Cosmos in then fixed perpendicular to Strut CC18 with suitable edge & centre brackets. |
| 170 | Replacement of Existing Doors of WC: Existing Door Panel Size: 825 x 2100 To Replace existing door with new door panel with 35mm thick water proof door panel with both side lamination of water proof sunmica and door latch with indicator knob in SS and SS Hinges |
| 171 | High Pressure laminate toilet cubicle of size 1200 mm D x 100mm (W) x 2100mm H with door size 600 mm W x 1800mm |
| 172 | High Pressure laminate partition between male & fremale toilet upto height of 2400mm |
| 173 | Window In Wash Room : Glass & aluminum window 525 X 1050 mm |
| 174 | Vitrified Tile Flooring In Wash Room + WC |
| 175 | Cost of Water Proofing |
| 176 | Wall Tile In WashRoom Upto 2.25 m Height : |
| 177 | Granite Supply & Installation for Wash Basin Counter |
| 178 | Painting Work On Ceiling & Wall Of Wash Room : |
| 179 | Ceramic Wash Besin of size 42"X12" Table Top Mounted of Simpolo make |
| 180 | Replacement of Existing Indian WC with Wall Hung Western WC of Simpolo make |
| 181 | Urinals in Ceramic body of Simpolo make |
| 182 | Urinal Partition |
| 183 | Demolition of Existing Wall Paneling, Ceiling & Scaffolding Cost |
| 184 | Providing and Fixing Plumbing work with accessarice for both room |
| 185 | CSMC 1st Year 5% onPART C to F Exc. GST |
| 186 | CSMC 2nd Year 5% onPART C to F Exc. GST |
| 187 | CSMC 3rd Year 5% onPART A to F Exc. GST |
| 188 | CSMC 4th Year 5% onPART A to F Exc. GST |
| 189 | 1st Year Operations of Audio visual system As per rate Analysis ( Attendent Rate Per Month X Two Attendent in generalShift X12 Month=32,668X 2X 12= |
| 190 | 2nd Year Operations of Audio visual system |
| 191 | 3rd Year Operations of Audio visual system |
| 192 | 4th Year Operations of Audio visual system |
| 193 | 5th Year Operations of Audio visual system |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
