Rural Development And Panchayats Department has published Tender For Mines Pmkkky-2023-2024Reddiarchatram Block Tn-05-10-04(2 Works ). Submission Date for this Tender is 05-02-2024. Excavation Work Tenders in Dindigul Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Part 1 :Construction of Public Distribution Shop Konur H/o KonurEstimate Amount Rs.13.53 Lakhs |
2 | Earthwork excavation and depositing on bank with an initial lead and lift in all classes of soils and sub soils except in hard rock including all labour charges etc . Complete. |
3 | Supplying and filling in foundation and basement with crushed stone dust in layer of not more then 15cm thick is wll rammed watered and conslidated etc., complete |
4 | Supplying and filling in foundation and basement with crushed stone dust in layers of not more than 15cm thick, well rammed watered and consolidated etc., completecomplying with standard specification. |
5 | Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. |
6 | Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. |
7 | Supply & erection of centering for sides & soffits of all R.C.C. worksincluding cost & conveyance of all materials to site and all labour charges etc., complete. |
8 | RCC 1:1.5:3mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc complete |
9 | Supplying and fabrication of steel rods including cost & conveyance of steel as per std. Specification etc., complete. |
10 | Brick work in c.m 1:5 mix using country bricks including cost & conveyance of all materials to site and all labour charges etc., complete. |
11 | Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials & all labour charges etc., complete. |
12 | Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials & all labour charges etc., complete. |
13 | Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangementsincluding laying to correct alignmentwith necessary cement mortar and black powder etc., complete compllying with standard specification and as direct. 38/40mm Thick |
14 | Finishing top roof with pressed tiles including cost & conveyance of all materials to site and all labour charges etc., complete. |
15 | Providing Granolithic pattern floor finish with c.c 1:2:4 mix using 10 to 12mm ISS metal including cost & conveyance of all materials to site and all labour charges etc., complete. (25mm thick) |
16 | Paving the floor with Anti skid tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying wit |
17 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying with std specificati |
18 | Supplying and fixing in position best Indian make White glazed earthern ware Oriya type Indian Water Closet |
19 | White washing two coats with shell lime inclluding cost & conveyance of all materials to site and all labour charges etc., complete. |
20 | Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labor charges etc complete. |
21 | Distember painting two coats with approved colour including cost and conveyance of all materials to site and all labour charges etc complete |
22 | Painting two coats with best quality ready mixed enamel paint including cost and conveyance of all materials to site and all labour charges etc complete |
23 | Towards cost and supply of doors, windows & Ventilator |
24 | Steel Door of Size (1.00 x2.10) |
25 | PVC Door of size (0.90 x 2.10) |
26 | Window of Size ( 1.00 x 1.20) |
27 | Ventilator of size (0.90 x 0.60) |
28 | Rolling shuter of Size ( 1.80 x 2.40) and( 2.10 x 2.40) |
29 | Electrifcation Arrangements |
30 | Supply and fixing of 16 AmpsDPIC switch of 500V grade with Fuse and Nutralon suitable T.W. board with painting of suitable colour with PWD Earthing (SD No.142) |
31 | Supply and run of 2 of 6 sq. mm ( 84/0.30) polythene insulated and PVC unsheeted S.C. Alu cable of 1100 V on 7/20 Gi bearerwirefor Service Connection Main -SD.66 |
32 | Supply and run of 2 x1.5sq. Mm(22/.3)PVC insulated SC unsheeted CU. Conductor of 1100Grade in 25mm Dia GI PIPE (Glass"B")suitably Bent at both ends with necessary angle iron upright and end supports for Mains SD 69 |
33 | Supply and fixing of 11W CFL lamp for existing BH point. (Data - B) SD 80 |
34 | Supply and Fixing of Tube Light SD88 |
35 | Supply and fixing of W.T. Bulk head fitting complete with guard suitable for lamp with 60 W bulb with PVC unsheated leads from terminal to the fitting - SD. 84 |
36 | Wiring with 2 x 1.5 Sq.mm PVC uncheated SC cu.cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open Light point & Fan Point SD 17 |
37 | Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - inte Plug point. SD 36 |
38 | Supply and Fixing of Ceiling fan(crompton make) including cost and conveyance of all materials and labour cherges etc complete.Ceiling Fan SD 114 |
39 | Supply and Fixing of AC Exhaust fan 300mm sweep complete without provision of hole in the wall Exhaust Fan 300mm SD 115 |
40 | Supply and fixing of Main Service board.etc complete. |
41 | Provision for Water supply arrangements etc., |
42 | 63mm PVC pipe 4KSC |
43 | 63mm PVC MTA |
44 | 63mm PVC Bend |
45 | 25mm PVC Tap (Local rate) |
46 | 1000litre HDPE Tank |
47 | Earth work excavation in all clauses of soil as per SS20B. |
48 | Labour charges for Laying and Joining PVC pipes including all cost etc complete |
49 | Provision for wash hand Basin |
50 | Provision for RWH Arrangements |
51 | Provision for Ramp Handrails |
52 | Provision for Nameboard |
53 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
54 | Part 3 :Construction of Public Distribution Shop Building (Type 1 ) At Vellampatti H/o KonurEstimate Amount Rs.10.00Lakhs |
55 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
56 | Supplying and filling in foundation with filling M.sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
57 | Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officersin layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification |
58 | Cement Concrete 1:4:8 (One Cement, Four M.sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
59 | Brick work in Cement Mortar1:5 (one cement and five M.sand) using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4"for foundation and basement including curing, etc., complete complying with standard specifiction. |
60 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton |
61 | Below Ground level |
62 | Above Ground level |
63 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. |
64 | Reinforced Cement Concrete 1:1.5:3 (One Cement, One and a half M.sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessaryetc., complete complying with standard specification and as directed by the departmental officers |
65 | Plastering with Cement Mortar 1:3 (One cement and three M.sand), 10mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
66 | Plastering with Cement Mortar 1:5 (One cement and Five M.sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
67 | Plastering with Cement Mortar 1:3 (One cement and three M.sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
68 | Dadooing wall with Glazed tiles of any colour of any size laid in C.M 1:2 mix 20 mm thick & pointing with colour cement using 0.40kg per sq.m including cost & conveyance of all materials to site and all labour charges etc.complete |
69 | Paving the floor with Cement Based Hydraulically Pressed Anti skid Tiles(Pattern Design) - 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
70 | Providing granolithic floor finish of the 40mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. |
71 | 40mm thick |
72 | 20mm thick |
73 | Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
74 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers. |
75 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the wallssmooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. |
76 | Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
77 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. |
78 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter |
79 | PVC Door D2 of size 0.90 x 2.10m (Single leaf) |
80 | Supplying fabricating and fixing of alu. Anodised colour matt finish half paneled and half glazed double leaf door the outer frame shall be with alu.box section |
81 | Aluminium door of size 1.00 x 2.10m |
82 | Fabrication and supply of MILD STEEL WINDOW of of the following size with Double Leaves outer frame made of 35x35x5 mm equal M.S.L angle, mullion section made of 25x25x5mm equal T section, Shutter Frame madeof 25 x 25 x 5mmequal M.S.L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 No. Horizontal for each shutter using 25 x 25 x 5mmequal M.S. T section fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame,4 Nos. of hold fasts made of 35x35x5 mm equal M.S.L angle , 2 Nos. of peg stays with holes for keeping the windows open in different positions, 2 Nos. of locking handles, fixing the shutter with 4 Nos. of 4 inch hinges with outer frame of the window including painting the whole unit with one coat of best quality of red oxide primer for PDS building |
83 | Steel window W of size 1.00m x 1.30m (Double leaf) |
84 | Fabrication and supply of N TYPE MILD STEEL GLAZED VENTILATOR (in two parts)of of the following size outer frame made of 25x25x5mm equal M.S.L angle with intermediate rails using25 x 25 x 5mmequal M.S. T section for panels with 3mm thick pin headed glass with teak wood beading and glass putty and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame,4 Nos. of hold fasts connecting the 2 parts at 75mm clear and with 45 degree inclination with 25x25mm 10G weld mesh and wire mesh including painting the whole unit with one coat of best quality of red oxide primer for PDS |
85 | Ventilator of size 0.90m x 0.60m |
86 | Towards the cost of Supply and erecting ofpull and push type Steel Rolling Shutterwith ISI make using 18 GI sheet and paintedwith one coat of best quality of red oxide primer inclusive of hood covers, transportationcharges etc. complete |
87 | Rolling shutter |
88 | Fabrication supply and fixing in position of Aluminium natural colour matt finish fully glazed fixed partition of size 4.50x3.00m size of opening with Aluminium grill including all charges etc.,complete |
89 | Aluminium partition at Office |
90 | Labour charges for fixing of Doors, windowsin position including allcharges etc.,complete |
91 | Steel doors |
92 | Steel window and ventilator |
93 | Supplyand fixing in position best approved quality and make white glazed earthen ware oriya type Indian water closet of size 580 mm with P or S trap embedding the closest and trap to shape in position with brick jelly lime concrete 1:2:5 (one lime two sand and five brick jelly) using 40 mm broken brick jelly and finishing the top to required slope and including giving connections to the PVC soil stacks using 0.60 mlong PVC Pipe 110 mm dia. 6 kg/sqcm by dismantling masonry, RCC roof or floor slaps and making good, the disturbed portion to original condition without and leakage etc. complete as directed by the departmental officers and complying with standard specifications |
94 | Supply and Fixing of Cuddapah slab of 20/30mm thick for Shelf arrangements including cost and conveyace of all materials to site and all labour charges etc complete |
95 | Electrification (2021-22 SoR) |
96 | Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point(for electronic regulator) - S.D.No: 20 |
97 | Wiring with 2 x 1.5 sq.m (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessoriesand with 150 x 100 x 113 TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continuos earth wire connection of 14 SWG TC wire for open PVC plug- S.D.No: 36 |
98 | Supply and fixing of 1200mm (48") AC ceiling fan with stepped electronic 300 W regulator with 1 meter down rod on the existing clamp. - S.D.no: 107 |
99 | Supply and run of 2 of 1.50 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V on 7/20 GI bearer wire for service connection mains. - S.D.No: 64 |
100 | Supply and fixing of single box type 4"40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting - S.D.No: 88 |
101 | Supply and Fixing of CFL bulb 11w including cost and conveyance of all materials and labour charges etc complete. SD 80 |
102 | Supply and fixing of 16 Amps DPIC Switch of 500V with fuse and neutral (Side Handle) on suitable TW Board, with earth connection only. - S.D.No: 142 |
103 | Supply and fixing of TNEB meter Board suitable for 32A Single phase service connection with 32A fuse unit(500V) 32A neutral link and earth link (1"x1/8" Copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit - SD No: 125 |
104 | EB Deposit amount |
105 | Provision for Water supply arrangements etc., |
106 | Supply and fixing of 1000 litre HDPE tank |
107 | 63mm dia PVC pipe |
108 | 63mm dia PVC Tee |
109 | 63mm dia PVC Elbow |
110 | 63mm dia PVC Bend |
111 | 20mm dia PVC pipe |
112 | 20mm dia PVC Tee |
113 | 20mm dia PVC Elbow |
114 | 20mm dia PVC Bend |
115 | 20mm x 15mmdia PVC Reducer |
116 | PVC screw down tap heavy type 20mm dia |
117 | Earth work excavation in hard stiff clay and hard rock earth and lowering and laying, Jointing of pipes and refilling the trench with excavation soils, well rammed and consolidated after the pipes and specials are laid, jointed and tests including all labour charges etc.,complete |
118 | Provision for Septic TankArrangements |
119 | Provision for Sanitary pipe line & dispersion arrangements including all charges etc.,complete |
120 | 110mm dia PVC pipe 4kg/sqm |
121 | 110mm dia PVC Tee |
122 | 110mm dia PVC elbow |
123 | Provision for Name Board and Information board |
124 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail