Military Engineer Services-MES has published Tender For Special Repair To Certain Living-In (P-710, 711 And T-73) Billets At Af Stn Gwalior. Submission Date for this Tender is 07-03-2024. Railway Ancillaries Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Feb-2024 | AMD1 | Date | 26-02-2024 |
| 2 | 16-Feb-2024 | AMD2 | Date | 04-03-2024 |
| 3 | 23-Feb-2024 | AMD5 | Date | 07-03-2024 |
| 4 | 23-Feb-2024 | AMD4 | Other | 07-03-2024 |
| 5 | 23-Feb-2024 | AMD3 | BOQ | 07-03-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) of any mix / grade inground floor and pavings not exceeding 15cm thickness (below or above ground level) including removal of debris to a distance exc 1.5Km but n.exc 5Km and deposited where directed, complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal of debris to a distance exc 1.5Km but n.exc 5Km and deposited where directed, complete all as specified and directed. |
| 4 | M&L for non skid coloured ceramic floor tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified &directed. |
| 5 | M&L for glazed coloured ceramic digitally designed coloured tiles 450 x 300 x 7mm thick on vertical surfaces such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM (1:4) complete all as specified &directed. |
| 6 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors, finished even and fair (without using extra cement) complete all as specified and directed. |
| 7 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 8 | M&L for brushing neat cement slurry with 3.0Kg of cement per Sqm complete all as specified and directed. |
| 9 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 10 | M&L for machine cut kota stone slab flooring 20mm to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including screed bed or bedding layer of mortar 15mm thick in CM (1:6) complete all as specified & directed. |
| 11 | M&L for machine cut kota stone slab flooring 20mm to 25 mm thick in riser of steps, skirting, dodo and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including rendering 10mm thick in CM (1:4) complete all as specified & directed. |
| 12 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and chemfering or rounding of exposed edges as in cooking platform/ windows cill or other similar situation over & including screed bed or bedding layer of mortar 15mm thick in CM (1:4) complete all as specified & directed. |
| 13 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof padding concrete as in levelling course to maintain the true roof slope, roof kerbs or mud stops rounded or chemfered in edges etc, finished even & smooth without using extra cement complete all as specified and directed. |
| 14 | Material and Labour for 50 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone agg) as in floors, finished even and smooth using extra cementcomplete all as specified and directed. |
| 15 | M&L for Single component, weather resistant, liquid applied acrylic polymer based elastomeric waterproof coating using elastomeric waterproofing membrance for all types of exposed roof slabs (new and old), terraces (sloped and flat) waterproof coating shall be UV rays resistant, solar reflective, etc complete all as specified in particular specifications. |
| 16 | S&F in repair Stainless Steel fancy type drapery rod of 25mm inner dia with brackets and both side decorative type lattoo, design and pattern as approved by GE complete all as specified and directed. |
| 17 | Taking up or down steel water tubing and connections of 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 18 | Taking up or down steel water tubing and connections of 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 19 | Supply and fix 15 mm bore GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors complete all as specified and directed. |
| 20 | Supply and fix 20 mm bore GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors complete all as specified and directed. |
| 21 | Supply and fix in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flush system valve float and handle, PVC flush pipe 32 mm bore and brackets complete set all as specified anddirected. |
| 22 | Supply and fix in repair WC squatting pan " Orissa Pattern" of size 580 X 440 mm white with integral foot rest including PVC P or S trap, front or back inlet and making connection to trap and to flushing cistern and including lime concrete bedding complete all as specified anddirected. |
| 23 | S&F vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc., completeall as specified and directed. |
| 24 | S&F in repair plastic seat cover for vitreous china water closet pan (pedestal pattern), including mild steel CP hinges completeall as specified and directed. |
| 25 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 26 | S&F in repair vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste, chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed. |
| 27 | S&F in repair vitreous china urinals, full stall pattern including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; including fixing and supply of CP brass spreaders complete all as specified and as directed. |
| 28 | S&F in repair 15mm bore stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, quarter turn with water saving nozzle, screwed both end for iron pipe or for unions and fixed complete all as specified and directed. |
| 29 | S&F in repair 15mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, quarter turn with water saving nozzle, screwed both end for iron pipe or for unions and fixed complete all as specified and directed. |
| 30 | S&F in repair 15mm bore Bib taps, fancy type, cast copper alloy, quarter turn with water saving nozzle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 31 | S&F in repair 15mm bore Pillar taps, fancy type, cast copper alloy, chromium plated, srewed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, quarter turn with water saving nozzle screwed for iron pipe and fixed complete all as specified and directed. |
| 32 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 33 | S&F in repair stainless steel grating doom 100mm dia with waste hole fixed in cement, complete all as specified and directed. |
| 34 | S&F looking mirror size exc 0.60 Sqm & n"exc 2.00 Sqm with 5.5 mm thick sheet glass selected quality, fixed on wall with screws & necessary fixing arrangement including rounding/ chemfering of glass edges etc complete all as specified & directed. |
| 35 | S&F in repair 600 x 450 mm bevelled edge looking mirror of selected quality glass mounted on5 mm thick PVC board backing and fixed to wooden plugs with chromium plated brass screws and cup washers in position complete all as specified and directed. |
| 36 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 37 | S&F in repair brass Chromium Plated soap dish with glossy finish complete all as specified and directed. |
| 38 | S&F in repair overhead shower ABS Round with 225mm SS Arm & flange joint chromium plated screwed down 15mm bore, complete all as specified and directed. |
| 39 | S&F in repair PTMT waste pipe of 32mm bore of length up to 80 cm for WHB/sink/unrinal pots etc, complete all as specified and directed. |
| 40 | S&F in repair high density polythelene pipes (HDPE) of pressure rating 6kgf/sq.cm fixed complete to walls, ceilings or in floors etc, complete all as specified and directed. |
| 41 | S&F rotational moulded polyethylene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mmbore GI medium grade overflow pipe (450mm long) and washout pipe (600 mmlong) with fittings including dismantling of existing tank and lowering down etc complete all as specified and directed. |
| 42 | S&F rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mmbore GI medium grade overflow pipe (450mm long) and washout pipe (600 mmlong) with fittings including dismantling of existing tank and lowering down etc complete all as specified and directed. |
| 43 | S&F in repair 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified & as directed. |
| 44 | S&F in repair 15mm bore, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. complete all as specified and directed. |
| 45 | S&F in repair 20mm bore, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. complete all as specified and directed. |
| 46 | Taking down cement plaster on brick or stone masonry, etc. including raking out joints, hacking for key and scrubbing down with water, etc complete all as specified and directed. |
| 47 | Demolition of brickwork built in cement mortar and including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed. |
| 48 | M&L for brickwork using old size sub class "B" bricks, straight or curved on plan, exceeding 6m mean radius using old size brick built in CM (1:6) complete all as specified and directed. |
| 49 | All as per Ser item No.1.48 here-in-before but except bricks (by using old unserviceable bricks) complete all as specified and directed. |
| 50 | M&L for rendering 5mm thick in cement mortar (1:4) on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified & directed. Note:-(1) Cost of scaffolding for rendering is to be included in the quoted rate. |
| 51 | M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surface, finished even and smooth without using extra cement complete all as specified and directed. Note:-(1) Cost of scaffolding for rendering is to be included inthe quoted rate. |
| 52 | Material and Labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brickwork / external surface of masonry wall using liquid water proofing compound mixed @200 ml per bag of cement, surface finished even and smooth without using extra cement completeall as specified and directed. (Note: (I) WPC will be measured and paid separately under respective item of BOQ (II) Cost of scaffolding for rendering is including inthe quoted rate. (III) Rendering will be done in two layers, 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick. |
| 53 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty and primer, complete all as specified and directed. |
| 54 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 55 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint of approved shade/tint with alkali & fungal resistant primer etc complete all as specified and directed. |
| 56 | Dismantling of Asbestos cement sheet/steel (corrugated, semi-corrugated, etc.) sheets as in roof coverings/ cladding and ridge of any type complete all as specified and as directed. |
| 57 | Dismantlingstructural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed. |
| 58 | S&F mild steel work as in Roof trusses, trussed purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-290(Gde-E-165), complete all as specified and as directed. |
| 59 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290(Gde-E-165), complete all as specified and as directed. |
| 60 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering /ridge/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 61 | M&L for pre-painted galvalume aluminium zinc coating GI based Plainsteel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering /ridge/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 62 | S&F rubber beading 40mm wide strip in bottom of door complete all as specified and directed. |
| 63 | Taking down chowkhats or frames with shutters not exceeding 1.5Sqm each (without taking off shutters from the frames) etc including builders hardware etc complete all as specified & directed. |
| 64 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each including builders hardware etc complete all as specified and directed. |
| 65 | S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 66 | S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 67 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both side and both faces covered with approved pattern with decorative coloured laminated (machine pressured) type 1 of 0.9mm thick and all around side faces covered with 10mm thick first class HW liping duly polished complete all as specified & directed. |
| 68 | S&F factory made 35mm thick IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & stile as per IS: 1003 (Part I), Kiln seasoned & chemically pressure treated complete all as specified and directed. |
| 69 | S&F factory made 35mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any numbers. and mitred beads for securing wire gauge, etc. sizes ofmembers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a)Kiln seasoned & chemically pressure treatedcomplete all as specified and directed. |
| 70 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete allas specified and directed. |
| 71 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete allas specified and directed. |
| 72 | S&F 100mm long SS butt hinges medium weight, complete all as specified and directed . |
| 73 | S&F 150mm long aluminium anodised barrel tower bolt extruded section complete all as specified and directed . |
| 74 | S&F 150mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 75 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 140mm complete all as specified and directed . |
| 76 | S&F steel door spring of size 200mm to wooden/steel frame by welding or screwing as whichever is appropriate for fixing in frame, complete all as specified and directed . |
| 77 | S&F 250mm long stainless sliding door bolt with hasp, staple (bolt type) and fixing clips, fixing bolts and sliding bolts complete all as specified and directed. |
| 78 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed. |
| 79 | M&L for PCC 1:3:6 type C-1 (using 20mm graded stone agg) as in filling in holdfast blocks and like, complete all as specified and directed. |
| 80 | M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 81 | M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 82 | M&L for preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 83 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or aluminium grid frame work complete all as directed. |
| 84 | M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and directed. |
| 85 | M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to sourrounding wall using nylon sleaves and screws at 450mm centre to centre/intermidate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flanges of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips accross the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasterners 12.5mm dia, 40mm long complete all as specified. |
| 86 | S&F in repair suspended false ceiling snap grid of any description (Aluminium or GI) after carrying out necessary minor repairs to damaged parts of snapgrid and replacing the major damaged parts of snap grid with new ones of the same description to match with existing complete all as specified and directed. Note: The quoted rates are inclusive of providing new hold down clips and GI wire. |
| 87 | S&F in repair false ceiling board of any thickness and description to existing snap grid including applying two coats of oil bound distemper over a coat of primer after preparation of surfaces complete all as specified and directed. |
| 88 | Supply only Liquid water proofing compound complete all as spesified and directed. |
| 89 | Taking down eves gutters and rain water pipe of any description with all fittings complete all as specified and directed. |
| 90 | S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/trenches/walls, etc, complete all as specified and directed. |
| 91 | S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/trenches/walls, etc, complete all as specified and directed. |
| 92 | S&F 110 mm bore PVC (SWR) bends and fixed in position with adhesive, complete all as specified and directed. |
| 93 | S&F 75mm bore PVC (SWR) bends and fixed in position with adhesive, complete all as specified and directed. |
| 94 | S&F 75mm bore PVC (SWR) floor trap plain with grating including joints with solvent, complete all as specified and directed. |
| 95 | S&F powder coated aluminium (minimum thickness of powder coating 50micron) work for doors, windows, ventilator and partitions (fixed portion) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS-1285, fixing with dash fasterners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechnically wherever required including cleat angle. Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed. |
| 96 | S&Fpowder coated aluminium (minimum thickness of powder coating 50micron) for shutter of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whenever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS-1285, fixing with dash fasterners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechnically wherever required including cleat angle. Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed. |
| 97 | S&F powder coated aluminium grill (minimum thickness of powder coating 50 micron) to required shade according to IS-1868 of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. |
| 98 | M&L for complete removal of existing treatment from old surfaces of walls including cornices and applying 1mm thick wall care putty including suitable primer to obtain the desired/ true surface of wall complete all as specified and directed by Engineer- in-charge. |
| 99 | M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash on ceiling, complete all as specified & directed. |
| 100 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete all as specified & directed. |
| 101 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of oil bound distemper, complete all as specified & directed. |
| 102 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of cement base paint of approved shade/tint with alkali & fungal resistant primer on walls etc complete all as specified and directed. |
| 103 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of exterior emulsion paint on wall, complete all as specified & directed. Note: Colour shall be decided by Engr-in-Charge. |
| 104 | S&F 4mm thick frosted sheet glass, square or rectengular, area n.exc. 0.50Sqm in each pane and fixing to window, ventilator shutters, etc. complete all as specified and directed. |
| 105 | S&F 4.8mm thick sheet glass of ordinary quality, square or rectengular, area n.exc. 0.50Sqm in each pane and fixing to frame, window, etc. complete all as specified and directed. |
| 106 | S&F in repair 18mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screws, solvent cement/ adhesive to make cupboard shutters, including demolition of existing cupboard shutter complete all as specified and directed. |
| 107 | S&F in repair 18mm thick PVC board of grade 1st quality of both side plain white colour fixed with screws, solvent cement/adhesive to make cup board sides top and bottom, shelves inside the cup board and shutter or drawerincluding demolition of existing board any type or specification complete all as specified and directed. |
| 108 | S&F continuous (Piano) hinges, stainless steel (304 Gde), bright finished or electrogalvanised, width of flap 30mm (when open), complete all as specified and directed. |
| 109 | S&F 125mm size stainless steel (304 Gde), Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 110 | S&F in repair Magnet catcher for kitchen cabinet shutters as per approved sample complete all as specified and directed. |
| 111 | S&F in repair of stainless steel peg sets of 6 Nos peg set of good quality, complete all as specified and directed. |
| 112 | Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate including necessary formwork and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed. Note:-(1) Cost of scaffolding for repairing work including in the quoted rate. |
| 113 | Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where directed and providing water proofing treatment of sunken slab in following .(a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all loose surface imperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wrapping of bath seal tape on the pipes inserted through walls to floor and seal it and grouting around the inserted pipes by pourable bath seal grout as directed. (d) Make angle fillets by mixing sand cement with WP chemical in all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by volume and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC as per manufacturer instructions in sunken slab over brick bat. (g) Fill the sanitary gaps with sealing compounds complete. |
| 114 | Taking down carefully existing unserviceable copper/ aluminium point wiring of any description & in any position with and includingPVC/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders, etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switches, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under respective item of BOQ. |
| 115 | Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable FRLS, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switches, sockets, regulators etc including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. Note :-(i) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & capping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A". (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thicklaminated sheet fixed with suitable brass screws and cup washers |
| 116 | All as per Srl item No.2.15 here-in-before but for 5 pin switch socket outlet combination, 5/6 Amps point on independent board controlled by one switch 5Amp, one way, etc complete all as specified and directed. |
| 117 | All as per Srl item No.2.15 here-in-before but for 5 Pin 5 Amp socket outlet point controlled by one switch 5 Amps one way on same board, etc complete all as specified and directed. |
| 118 | All as per Srl item No.2.15 here-in-before but for one 6pin switch socket outlet combination of 15Amp independent with PVC insulated and unseathed copper stranded conductor of size 2.5Sqmm including 2.5Sqmm PVC insulated and unseathed copper conductor for continuous earthing complete all as specified and directed. |
| 119 | M&L for switch flush type, single pole one way 5 Amps 240 volts, white ivory finish complete all as specified and directed. |
| 120 | M&L for socket outlet 2in1, 5pin, 6Amps flush type, white ivory finish complete all as specified and directed. |
| 121 | S&F switch socket combination multipurpose, 5pin, 6A, flush type, with indicator, complete all as specified and directed. |
| 122 | S&F switch socket combination multipurpose, 6pin, 6/16amps, flush type, with indicator, complete all as specified and directed. |
| 123 | S&F ceiling rose, surface bakelite 18 mm X 50 mm AC, 230 V polycarbonate isolated body, two or three terminals complete all as specified and directed. |
| 124 | S&F lamp holder PVC/Polycarbonate type with cord grip cap/back platesuitable for batten/angle /pendent fitting complete all as specified and directed. |
| 125 | S&F step type electronic fan regulator single phase, 230 volt, 100/120 watt complete all as specified and directed. |
| 126 | S&Fin repair decorative slim linear LED tube light fitting batten Type 01x20 watt light with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack with all accessories including 1 no. 20 watt LED tubelight and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathed and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed by Engineer in-charge. |
| 127 | Supply and fixingin repair Street/Security light fittings 1X35W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia of 40mm (Max) with (40 mm GI pipe light grade ), clamp, nut-bolt and washers complete all as specified & directed by Engineer in-charge. |
| 128 | Disconnecting & taking up or down existing unserviceable MCB DBs, VTPNwith all MCB"s/Isolator & metal clad box of any description and in any position with existing fittings (MCBs) complete all as specified & as directed. |
| 129 | S&F of sheet metal enclosure Double door for DBs8 way 240 Volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DBs cables/wires complete all as specified & as directed. |
| 130 | S&F factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts including provision for housing MCCBs in the incoming and MCBs in the out goingcomplete all as specified & directed . |
| 131 | Dismantling & Taking out MCBs/Isolator/MCCB & metal clad box any size, any type and capacity complete all as specified and directed. |
| 132 | S&F MCB SP 6 to 32 Amps ("B" Series) having current rating 10 kA, 240 Vcomplete all as specified and as directed. |
| 133 | S&F MCB SPN 40 to 63 Amps ("B" Series) having current rating 10 kA,240 V complete all as specified and as directed. |
| 134 | Supplying & fixing MCCB, 3 pole, 125 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having type DPX 160 fixed in distribution board, complete all as specified & directed. |
| 135 | Disconnecting & taking up or down u/s submain wiring of aluminium/copper conductor with two run/four run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surface to existing surfaces complete all as specified and directed. Note:- Two run/four run of single core PVC cable with one run of earth conductor shall be measured as one unit) |
| 136 | M&L for surface/concealed submain wiring as required with two single core FRLS PVC insulated and unsheathed copper stranded conductor of size 4 Sqmm 1100 Volts and one run of copper stranded conductor of size 4 Sqmm for continuous earthing drawn in and including rigid non metallic PVC conduit pipe ISI marked of size not less than 20 mm dia including to connect their incoming/outgoing electric connections by using required sizes of lugs/thimbles as well as flexible conduit of suitable sizes shall also be used at any open surfaces of conductor complete all as specified and directed. Note :-(i) Two single corecable and one run of earth copper conductor including conduit will be measured and paid as one unit length. (ii)The quoted rate shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for conceling the conduits to required depth and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. |
| 137 | M&L for surface/concealed submain wiring as required with two single core FRLS PVC insulated and unsheathed copper stranded conductor of size 6 Sqmm 1100 Volts and one run of copper stranded conductor of size 6 Sqmm for continuous earthing drawn in and including rigid non metallic PVC conduit pipe ISI marked of size not less than 25 mm dia including to connect their incoming/outgoing electric connections by using required sizes of lugs/thimbles as well as flexible conduit of suitable sizes shall also be used at any open surfaces of conductor complete all as specified and directed. Note :-(i) Two single corecable and one run of earth copper conductor including conduit will be measured and paid as one unit length. (ii)The quoted rate shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for conceling the conduits to required depth and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. |
| 138 | M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (industrial type) with one single pole MCB of capacity 20Amps, 240 Volts complete fixed on wall by provisioning of suitable size of MS strip, nuts, bolt and washers including taking down existing AC box, complete all as specified and as directed. |
| 139 | Taking down carefully Exhaustfan/Ceiling fan from existing place and removing to MES store yard Scraping, cleaning & painting with two coats of super enamelled paints (as approved by GE) greasing/oiling and refixing at site complete including electric connection withthree core flexible wire 1.5 sqmm complete all as specified and directed. |
| 140 | Taking down geyser carefully from existing place for re-use by disconnecting electric /water supply connection and refixing the same after civil work including all electric /water supply connection connecting with suitable wire all as specified and directed by Engineer-in-Charge. |
| 141 | M&L for Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in theground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground levelconnected to galvanized iron wire 4mm diaas earth leadby means of bolts, nuts and washers of GIup to test point, GI tubing20 mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal, magnesium, salt etc& 50mm thick pre-cast RCC (1:2:4) type B-1 (Nominal mix) cover withreinforced with 8 mm dia TMT bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally with suitable steel handle and angle iron 40X40X6mm frame and chamber of PCC (1:3:6) type C-1 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, includingtaking down of existing earthing complete all as specified and directed. Notes: 1.Earth lead & protection pipes length upto & including 7.50 metre. 2.Earth filling shall be done by vegetable soil. 3.Soil should be free from stone, boulders, aggregate, gravels etc. |
| 142 | S&F exhuast fan, steel body AC single phase 230V of size 300mm sweep heavy duty with blade, frame and louvers complete all as specified and directed. |
| 143 | Supply, laying, jointing & testing XLPE insulated,screened, armoured, electirc power cable ( heavy duty) with standard aluminium conductor, 1100 Volts grade of cross sectional area 35 Sq mm 3.5 core including taking out of cable any type and capacity from trenches, pole, road etc including necessary joints & bricks & removing form site complete all as specified and directed. Note : Excavation , earth work, sand cushioning for cable and cable protection cover shall be measured & paid under respective item. . |
| 144 | Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient forlaying cables/pipes etc.complete all as specified and directed by Engineer-in-Charge. |
| 145 | Returning, filling in including spreading, levelling, watering and well ramming in layers of25 cm thickafter the cables etc. are laid, jointed & tested complete all as specified and directed by Engineer-in-Charge. |
| 146 | Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 147 | M&L for sand filling with clean, dry and sieved fine natural river sand in two portion,including gently punning around cables after the cables are laid, in trenches for cable protection complete all as specified and directed. (NOTE: Only punned thickness shall be measured). |
| 148 | Supply & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed. |
| 149 | S&F Tube medium grade galvanised Tubeof dia 50 mm for road crossing of cable and on pole and DB cable as in cable protection complete all as specified and directed. |
| 150 | Supply, installation, commissioning of water cooler fully stainless steel, electric driven, single phase having approx storage and nominal cooling capacity of 40/80Ltrs complete all as specified and directed. |
| 151 | S&F GI tubes of 25mm bore, "medium grade", galvanised with all fittings laid in trenches, complete all as specified and directed. |
| 152 | S&F Electric water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25Ltrs, BEE 5star rated complete with all accessories such as safety valve, Thermostate, NRV, connection piece, etc complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
