Military Engineer Services-MES has published Tender For Addition/Alteration To Certain Billets And Living In Accommodation To Agniveervayu (Women) At Afs Yelahanka.. Submission Date for this Tender is 09-02-2024. Railway Ancillaries Tenders in yelahanka Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Jan-2024 | Amendments to tender documents | Other | 09-02-2024 |
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc 15 CM deep andgetting out in soft loose soil all as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose Soil all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of cables, Pipes etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/dense Soil all as specified and directed. |
| 4 | Returning filling in , including spreading , levelling, watering and well ramming in layers not exceeding 25 CM for any kind of soil all as specified and directed. |
| 5 | Removing of excavated surplus soil not exceeding 50m and depositing where as directed at a level not exceeding 1.5m above the staring point all as specified and directed. |
| 6 | M & L Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed. Note :For payment purpose consolidate thickness shall be considered for measurement. |
| 7 | M&L for Plain cement concretetype D-2,1:4:8 (using 40mm graded stone aggregate) in foundation, filling & mass concrete all as specified and directed. |
| 8 | M&L for precast cement concretetype B1 1:2:4 (using 20 mm graded stone aggregate) masonary with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 9 | M & L Pre-cast cement concrete block type C1, 1:3:6 (using 20 mm Graded stone aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 10 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.90 mm dia or securing all as specified and directed. |
| 11 | All as per item ser No 10 as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed. |
| 12 | M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished concrete flat all as specified and directed. |
| 13 | M & L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc and finishedrough surfaces of concrete flat all as specified and directed. |
| 14 | M&L for reinforced cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete all as specified and directed. |
| 15 | M&L for Reinforced cement concrete type B1, 1: 2 : 4 (using 20mm graded stone aggregate)inBeams, cantilevers, bressummers, lintels all as specified and directed. |
| 16 | M&L for 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces renderingis to be even & smooth without using extra cement on external wall complete all as specified and directed. |
| 17 | M & L for 15mm thick cement plaster in CM 1:4on fair faces of brick work or concrete surfaces to be finished even and smoooth with out using extra cement including mixing of WPC complete all as specified and directed. Note: Integral water proofing compound will be measured and paid as supply only separately. |
| 18 | M&L for preparation of the new plastered surfaces of walls and applying two coats of weather proof paint (Apex) over a coat of primer, complete all as specified and directed. |
| 19 | M&L for 15mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and as directed. |
| 20 | M&L for hard core of guage 63mm deposited, spread and levelled to a true surface complete all as specified and directed. |
| 21 | M&L for 100mm thick plain cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as sub base of floor all as specified and directed. |
| 22 | M&L for 75 mm thick cement concrete 1:3:6,type C-1 (using 20mm graded stone aggregate) for plinth protection and surface is to be finished even & smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for 40mm thick cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) in flooring all as specified and directed. |
| 24 | S&F of powder coated anodised aluminium frame with all fixing arrangementsfor doors, windows andventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron complete all as specified and directed. |
| 25 | S&F of powder coated aluminium door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, roller in each window, anodised alumnium snap beading, screw etc, complete all as specified and directed. |
| 26 | S &F of powder coated aluminium work forpartitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS :1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling,C.P brass/stainless steel screws, all complete as per architectural drawing and the direction of Eng-in-Charge |
| 27 | M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheetused instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed. |
| 28 | M&L for Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including fixing in frame at site etc complete all as specified and directed. |
| 29 | S&F of 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type and both side is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 30 | S&F for aluminium anodised, barrel tower bolt 150mm long of extruded section all as specified and directed. |
| 31 | S&F for aluminium anodised handle of size 150mm cast type all as specified and directed. |
| 32 | M& L for4 mm thick figured glass pin head type window/ventilator aluminium frame work & similar work with or without glass roller any size including neoprime gasket and all necessary fixtures to fix all as directed by Engineer-in-Charge |
| 33 | S&F of 9 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed. |
| 34 | S&F of milled steel framed work such as in grills conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 35 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 36 | M&L for glazed coloured Ceramictiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchas in skirting/dado over 10 mm thick backing coat in CM 1:4 finished all as specified and directed. |
| 37 | M&L for non skid coloured ceramic tiles 7 to 8 mm thickmatt finish(square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screedd bed 15 mm thick in CM (1:6)complete all as directed and specified. |
| 38 | S&F of vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. |
| 39 | S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed. |
| 40 | S&F 10 litre capacity PVC syphonic action type low level flushing cistern including all fittings and including flushing pipe fixed complete all as specified and as directed. |
| 41 | S&Fvitreous china wash basin, white or coloured of size 550 x 400 mmwith padestal including bracketsall as specified and as directed. |
| 42 | S & F Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipeand fixed in under counter wash basin completed all as specified. |
| 43 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 44 | S&F of Chromium Plated towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs all as specified and directed. |
| 45 | S&F of Chromium Plated health faucet of including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make - Jaguar /Cera/Ess Ess |
| 46 | S&F 15mm dia Bib taps chromium plated, fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. |
| 47 | S&F 15mm dia bib taps fancy type,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or CPVC pipe complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F 15mm dia stop valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F 15mm dia angle valves, cast copper alloy,Chromium plated, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions all as specified and directed. |
| 50 | S&F 15mm dia, stop valve concealed type chromium plated, fancy type with long shank and cup complete all as specified. |
| 51 | S& FBrass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed. |
| 52 | S & F of PTMT Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange all as specified and directed. |
| 53 | S&F of 15 mm dia two waybib taps with wall flange (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron/CPVC pipe or forbrass ferrule complete with check nut 15mm bore complete all as specified and directed. Make: Jaguar or Eqult in Cera/Parryware |
| 54 | S & F PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. |
| 55 | S & F of 32/40mm dia waste pipe for wash hand basin all as specified and as directed |
| 56 | S&F Chromium Plates grating of size 100 / 75mm fixed with white cement all as specified. |
| 57 | S&F Stainless steel Soap dish fix to wall all as directed and specified. |
| 58 | S&F Paper holder with Flap Recessed Type (Stainless steel)all as specified and directed by Engr-in-Charge. |
| 59 | S&F CPVC pipes20 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge. |
| 60 | S&F CPVC pipes25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge. |
| 61 | S&F 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallincluding flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge. |
| 62 | S&F PVC(SWR) bends 110mm dia with access door complete all as specified & directed by Engr-in-Charge. |
| 63 | S&F75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge. |
| 64 | S&FPVC(SWR) bends 75mm dia with access door complete all as specified & directed by Engr-in-Charge. |
| 65 | S&F PVC floor trap 75mm dia, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified. |
| 66 | S&F PVC (SWR) ‘S’/"P" trap 110mm bore all as specified and directed. |
| 67 | S&F in repair 25 mm bore ball valves high pressure of PTMT withepoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 68 | S&F in repair PTMT Nipple 25 mm dia suitable for HDPE water tank. (Minimum weight 20mm- 45gms ) all as specified and directed. |
| 69 | S&F of mild steel work in tubular/square/rectangular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 all specified and directed. |
| 70 | S&F mild plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with reveted,bolted or welded attachment conforming to Fe 410W (Gde E250 quality B) all as specified and directed. |
| 71 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 72 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws allas specified and directed. |
| 73 | Taking down door chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame) of any description all as specified and directed. |
| 74 | M&L for cutting openings through walls in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring,cleaning and stacking stone and removing surplus to store and rubbish off the premises all as specified and directed. |
| 75 | Excavating in post holes (or similar holes) in Hard/Dense soileach n. exc 0.5 cum, getting out, returning, filling in and ramming earth orbroken rubble mixed with earth around, in layers n. exc 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface all as directed. |
| 76 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed. |
| 77 | M&L for stone walling of squared rubble (Bangalore type), uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 78 | All as per item ser No 77 as above but except Stone all as specified and directed. |
| 79 | M&L for keyed pointing to square rubble masonry coursed or uncoursed in CM 1:4 all as specified and directed. |
| 80 | M&L for Plain cement concretetype C-2,1:3:6 (using 40mm graded stone aggregate) in foundation, filling & mass concrete all as specified and directed. |
| 81 | M&L for mild steel work with angle iron as in fencing struts including cutting tops to shape as diretced, drilling holes, notching for wire etc, flat iron fillet (for securing wiremesh etc) including all necessary drilling,bolting or riveting etc, and similar work conforming to Fe 290 Gde E-165 all as specified and directed. |
| 82 | S&F of 2mm thick fibre glass reinforced translucent plain colour sheeting fixed with coach screw and washer in roof,wall and angle iron etc all as specified and directed. |
| 83 | Dismantling structural steel work including doors,gates but excluding framed truss etc all as directed. |
| 84 | M & L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails anduides) and hanging; also fastening and fixing conform to Fe 410W (Gde- E-250 quality A) complete all as specified and directed. |
| 85 | S& F for aluminium powder coated drapery rod 25mm dia fixed with suitable bracket complete all as specified and directed. Note: Bracket will be measured and paid separately. |
| 86 | S& F aluminium powder coatedfancy type suitabe brackets fixed atboth endsof openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws inclnecesary drilling & finished with polishingEach opening shall have two fillets at both ends all as specified and directed. |
| 87 | M & L for plain cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) in copings including necessary form work all as specified and directed. |
| 88 | M & L Plain cement concrete type B-1 ,1:2:4 (using 20mm graded stone aggregate) as in benching of manholes including forming centre channel a half round or 1/4 section all as specified and directed. |
| 89 | Supply only liquid water proofing compound all as specified and directed. |
| 90 | M & L Precast RCC slab type B-1, 1:2:4 (Using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including use of form work complete all as specified and directed. |
| 91 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and directed. |
| 92 | M & L for reinforced concrete pipes, 200mm dia class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 93 | M& L for plain cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200mm dia pipe all as specified and directed. |
| 94 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 200mm dia bore pipes all and specified and directed. |
| 95 | Material and labour for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC conduit not less than 20mm dia and conduit accessories concealed in existing brick/stone wall and provision of PVC Insulated heavy duty ISI marked, FRLS, unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common including modular type terminal boxes made out of Galvanized sheet of thickness should be not less than 0.9mm thick for fixing of modular switches, modular fan regulators, modular socket outlets etc alongwith suitable modular plate for housing switches etc complete all as specified and directed for the following: - |
| 96 | (a) One light point controlled by one 6 Amps switch. |
| 97 | (b) One Exhaust fan controlled by one 6 Amps switch. |
| 98 | (c) One socket 6 amp on Same Board with other switches. |
| 99 | S&F switch piano flush type, single pole, one way 6 Amps all as specified and directed. |
| 100 | S&F socket outlet 2 in 1, 3 pin, 6 Amps flush type all as specified and directed. |
| 101 | S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and directed.. |
| 102 | S&F electric water heater (Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and Incoloy glass-coated heating element offers superior heating performance with excellent resistance to both oxidation and carbonization at high temperature. It also resists corrosion and extends the lifespan of heating elements with minimal energy loss. - 8 Bar Pressure Suitable forbuildings and pressure pump applications. The multi-function valve prevents pressure to increase beyond 8 bars. - Whirlflow Technology It avoids direct contact between cold and hot water flow for faster heating and optimized energy saving resulting in 20% more hot water output. - Shock-Safe Plug Indias first integrated shock-safe plug designed to prevent electric shocks by cutting off the power in case of current leakage all as specified and directed by Engr-in-Charge. |
| 103 | S&F single pole and netural sheet metal encloser with a two pin and earth plug socket complete including one double pole MCB of 6 to 32 Amp, C Curve, 10 KA rupturing capacity all as specified and directed. |
| 104 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-Charge. |
| 105 | S&FGI steel water tubing medium grade 15 mm dia with all fittings and fixed complete to walls all as directed. |
| 106 | S&F LED Tube light fitting 1 x20 W, 4 feet ,220V housing withPC diffuserbox type with driver,holder including LED tube light connecting upwith 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal all as specified and as directed. |
| 107 | S&F LED light fittingwith high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louver and complete all as specified and as directed by Engr-in-charge. |
| 109 | S&F Sub main wiring complete with two runs of 2 x 4 Sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 25 mm dia non matallic rigid PVCconduit and condit accessories concealed and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 1x4 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge. Note:- Two run of cable and one run of earth wire and PVC conduct is measured as one lenth. |
| 110 | S&F Sub main wiring complete with two runs of 2 x 2.5 Sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade, multistanded with copper conductor drawn through and including 25 mm dia non matallic rigid PVCconduit and condit accessories concealed and including provision of PVC insulated heavy duty ISI Marked, unsheathed cable 1100 volts grade 1x 2.5 Sqmm for earth continuity conductor and making good the disturbed surface also matching the existing surface all as specified and as directed by Engineer-in-charge. Note:- Two run of cable and one run of earth wire and PVC conduct is measured as one lenth. |
| 111 | S&F sheet metal enclosures forMCB distribution board 230 Volts Single pole and neutral 4 way Double doorcomplete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge. |
| 112 | S&F MCB Single pole and Neutral, 230 volts, 32 Amps, "C" Curve, 10 KA, includingMCB Single pole and Neutral complete all as specified and as directed by Engr-in-charge. |
| 113 | S&F MCB Single pole, 230 volts, 6 to 32 Amps, "B" Curve, 10 KA, includingMCB Single pole and Neutral complete all as specified and as directed by Engr-in-charge. |
| 114 | M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe medium grade 40mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C2 bed and chamber RCC (1:2:4) type B1, iron grill including PCC cover with hinge and funnel watering pipe etc all as specified and directed by Engr-in-Charge. |
| 115 | S & F 4mm dia galvanised iron or steel wire as a earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and directed. |
| 116 | Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 10 Sqmm, 2 core multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed by Eng-in-Charge. |
| 117 | Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250 mm x 150mm x 40mm complete all as directed. |
| 118 | Returning filling in excavated soil upto a depth of 30cm after riddling excavated soil (in lieu of sand) for cushioning of cable and refilling of trenches with left over normal excavated soil complete as directed. |
| 119 | Supply and lay GI tubing light grade, 40mm dia in trenches for road crossing/laid in floors,on wall, etc all as specified and directed. |
| 120 | Supply and fix cable route indicator made out of 3 mm thick MS sheet of suitable size (As approved by Engr-in-charge)duly painted with two coats black paint over a coat of red oxide primer and writing cable direction, Nature of cable (i.e MAFI, MRS, Sub station etc.), size of cable (in SQMM), type of cable (LT cable)with white paint, mounted on angle iron 40x40x3 mm, angle height 45 cm, (30cm below ground level) with PCC 20cmx20cmx15cm all as specified and as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
