Tender For Running And Maintenance Of Rws Scheme In Sepahijala Dist./ Sh Providing And Fitting Fixing Of Starter Spare Parts And Other Electrical Accessories , Panel Board Under Boxanagar Rd Block With In The Jurisdiction Of Dws Sub-Division, Sonamura Dur, sonamura-Tripura

Tender For Running And Maintenance Of Rws Scheme In Sepahijala Dist. / Sh Providing And Fitting Fixing Of Starter Spare Parts And Other Electrical Accessories , Panel Board Under Boxanagar Rd Block With In The Jurisdiction Of Dws Sub-Division, Sonamura During The Year 2023-24 ( Gr-I ) - 1 Providing and fitting , fixing 3 pole power contractor Type 415, 50 HZ ( L & T make) as per direction of the Engineer-in-Charge 2 ML 1.5 3 ML2 4 Providing and fitting , fixing Bimetal overload relay Type ML series L & T make as per direction of the Engineer-in-Charge.(i)15-21 Amp 5 ii).20-32 Amp 6 Providing and fitting , fixing Std. operating coil for 415 V , 50 HZ, L & T make as per direction of the Engineer-in-Charge.(i) ML 1.5 7 (ii) ML2 8 Providing and fitting, fixing combination coil ML2 with Timer L & T make as per direction of the Engineer-in-Charge. 9 Providing & fitting, fixing Thermal Timer Type GT 200 , 415V , 50 HZ for 5-18 Sec, L & Tmake as per direction of the Engineer-in-Charge. 10 Providing and fitting, fixing Electronic Timer Type ET100, 415V, 50Hz, for 9-30 Sec, L & T make as per direction of the Engineer-in-Charge. 11 Providing and fitting , fixing spare kit withoutcoil ( L & T) make as per direction of the Engineer-in-Charge.(i).ML1.5 12 ii).ML2 13 Supplying and fitting, fixing of 3.5 mm thick rubberinsertion for different dia. 14 Providing & fitting , fixing of fully Automatic star Delta Motor Starter sheet enclosure for submersible motor output at 415 volt , 3 ph, 50 HZ relay range 20-32A ( ML2 , FASD cat No.SS90705) ( L & T make). 15 Providing & fitting fixing of fully automatic star Delta Motor starter in sheet enclosure for submersible motor output at 415 V , 3Ph , 50 HZ relay range 13-21A ( ML 1.5 FASD Cat No. SS90705 L & T make). 16 Providing and fitting fixing Single phasing preventor selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L & T/BCH/HAVELS/Siemens etc. make complete as per specification and direction of the Engineer-in-charge. 17 Supplying & fitting , fixing of 2/3HP submersible panel starter, relay range(17.40-24.00 Amps of BCH make. 18 Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), current range415/500 Volt, L & T / Havells/BCH make etc. complete as per specification and direction of the Engineer-in-charge. 19 i).32Amps 20 ii).63 Amps 21 Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.(i).10sqmm 22 ii).16sqmm 23 Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. 24 Providing and fitting fixing of moving iron type, Range 0-100/0- 200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. 25 Providing & fitting, fixing of Volt-Ammeter 500V, 60A,Cat No.CS94817EOTO (L&T make) as per specification and direction of the Engineer-in-charge. 26 Providing & fitting ,fixing of 40A, double pole Isolator, Cat No.BE204000 (L&T make) as per specification and direction of the Engineer-in-charge. 27 Providing & fitting of 6A, 2 pin plug top, Cat No.OP02W06(L&T make) as per specification and direction of the Engineer-in-charge. 28 Providing & fitting, fixing of 6A, 3 pin plug top, Cat No.OP01W06(L&T make) as per specification and direction of the Engineer-in-charge. 29 Providing & fitting fixingof 16 Module grid frame+ cover, Cat No.OF16WOO (L&T make) as per specification and direction of the Engineer-in-charge. 30 Providing & fitting fixingof 16 Module surface box Cat No.OW16WOO (L&T make) as per specification and direction of the Engineer-in-charge. 31 Providing & fitting, fixing of 6A, 2 pin euro socket, Cat No.OC11W06(L&T make) as per specification and direction of the Engineer-in-charge. 32 Providing & fitting, fixing of 6A, 1-way switch with LED, Cat No.OS13W06(L&T make) as per specification and direction of the Engineer-in-charge 33 Providing & fitting, fixing of63 Amps 415 V kit kat rewireable fuseCat No. IHKKRN4032(L&T make) as per specification and direction of the Engineer-in-charge. 34 Providing & fitting, fixing of100 Amps 415 V kitkat rewireable fuseCat No. IHKKRN4100(L&T make) as per specification and direction of the Engineer-in-charge. 35 Providing & fitting, fixing of MK1 starter contactor 220VCat No. SS95200K000L&T makeas per specification and direction of the Engineer-in-charge. 36 Providing & fitting, fixing of MK1 starter relay,9-14ACat No. SS9003500AOL&T makeas per specification and direction of the Engineer-in-charge. 37 Providing & fitting, fixing of MK1 starter standard operating coil220VCat No. SS90044000L&T makeas per specification and direction of the Engineer-in-charge 38 Providing & fitting, fixing of MK1 starter thermal timer without combination coil Cat No. SS90224000L&T makeas per specification and direction of the Engineer-in-charge. 39 Providing & fitting, fixing of MK1 starter Aux. contact block :1 NO+1NCCat No. SS90120000L&T makeas per specification and direction of the Engineer-in-charge. 40 Providing & fitting, fixing of MK1 starter push bottom unit Cat No. SS90004000L&T makeas per specification and direction of the Engineer-in-charge 41 Providing & fitting, fixing of MK1 starter Arc shieldCat No. SS50004000L&T makeas per specification and direction of the Engineer-in-charge 42 Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to IScode for submersible motor withall necessary equipments & fitting s as requiredas per specification and direction of the Engineer-in-charge.i.4.0 sqmm 43 ii.10.0 sqmm

INR 1000 /-

INR 18860.0 /-

Refer document

Name of Work: Running and Mtc.ofRWS scheme in Sepahijala dist./ SH Providing and fitting fixing of starter spare parts and other electrical accessories , panel board under Boxanagar RD Block with in the jurisdiction of DWS Sub-Division, Sonamura during the year 2023-24 (Gr-I)

Sl. No.	Item Description
1	Providing and fitting , fixing 3 pole power contractor Type 415, 50 HZ ( L & T make) as per direction of the Engineer-in-Charge
2	ML 1.5
3	ML2
4	Providing and fitting , fixing Bimetal overload relay Type ML series L & T make as per direction of the Engineer-in-Charge.(i)15-21 Amp
5	ii).20-32 Amp
6	Providing and fitting , fixing Std. operating coil for 415 V , 50 HZ, L & T make as per direction of the Engineer-in-Charge.(i) ML 1.5
7	(ii) ML2
8	Providing and fitting, fixing combination coil ML2 with Timer L & T make as per direction of the Engineer-in-Charge.
9	Providing & fitting, fixing Thermal Timer Type GT 200 , 415V , 50 HZ for 5-18 Sec, L & Tmake as per direction of the Engineer-in-Charge.
10	Providing and fitting, fixing Electronic Timer Type ET100, 415V, 50Hz, for 9-30 Sec, L & T make as per direction of the Engineer-in-Charge.
11	Providing and fitting , fixing spare kit withoutcoil ( L & T) make as per direction of the Engineer-in-Charge.(i).ML1.5
12	ii).ML2
13	Supplying and fitting, fixing of 3.5 mm thick rubberinsertion for different dia.
14	Providing & fitting , fixing of fully Automatic star Delta Motor Starter sheet enclosure for submersible motor output at 415 volt , 3 ph, 50 HZ relay range 20-32A ( ML2 , FASD cat No.SS90705) ( L & T make).
15	Providing & fitting fixing of fully automatic star Delta Motor starter in sheet enclosure for submersible motor output at 415 V , 3Ph , 50 HZ relay range 13-21A ( ML 1.5 FASD Cat No. SS90705 L & T make).
16	Providing and fitting fixing Single phasing preventor selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L & T/BCH/HAVELS/Siemens etc. make complete as per specification and direction of the Engineer-in-charge.
17	Supplying & fitting , fixing of 2/3HP submersible panel starter, relay range(17.40-24.00 Amps of BCH make.
18	Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), current range415/500 Volt, L & T / Havell"s/BCH make etc. complete as per specification and direction of the Engineer-in-charge.
19	i).32Amps
20	ii).63 Amps
21	Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.(i).10sqmm
22	ii).16sqmm
23	Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge.
24	Providing and fitting fixing of moving iron type, Range 0-100/0- 200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge.
25	Providing & fitting, fixing of Volt-Ammeter 500V, 60A,Cat No.CS94817EOTO (L&T make) as per specification and direction of the Engineer-in-charge.
26	Providing & fitting ,fixing of 40A, double pole Isolator, Cat No.BE204000 (L&T make) as per specification and direction of the Engineer-in-charge.
27	Providing & fitting of 6A, 2 pin plug top, Cat No.OP02W06(L&T make) as per specification and direction of the Engineer-in-charge.
28	Providing & fitting, fixing of 6A, 3 pin plug top, Cat No.OP01W06(L&T make) as per specification and direction of the Engineer-in-charge.
29	Providing & fitting fixingof 16 Module grid frame+ cover, Cat No.OF16WOO (L&T make) as per specification and direction of the Engineer-in-charge.
30	Providing & fitting fixingof 16 Module surface box Cat No.OW16WOO (L&T make) as per specification and direction of the Engineer-in-charge.
31	Providing & fitting, fixing of 6A, 2 pin euro socket, Cat No.OC11W06(L&T make) as per specification and direction of the Engineer-in-charge.
32	Providing & fitting, fixing of 6A, 1-way switch with LED, Cat No.OS13W06(L&T make) as per specification and direction of the Engineer-in-charge
33	Providing & fitting, fixing of63 Amps 415 V kit kat rewireable fuseCat No. IHKKRN4032(L&T make) as per specification and direction of the Engineer-in-charge.
34	Providing & fitting, fixing of100 Amps 415 V kitkat rewireable fuseCat No. IHKKRN4100(L&T make) as per specification and direction of the Engineer-in-charge.
35	Providing & fitting, fixing of MK1 starter contactor 220VCat No. SS95200K000L&T makeas per specification and direction of the Engineer-in-charge.
36	Providing & fitting, fixing of MK1 starter relay,9-14ACat No. SS9003500AOL&T makeas per specification and direction of the Engineer-in-charge.
37	Providing & fitting, fixing of MK1 starter standard operating coil220VCat No. SS90044000L&T makeas per specification and direction of the Engineer-in-charge
38	Providing & fitting, fixing of MK1 starter thermal timer without combination coil Cat No. SS90224000L&T makeas per specification and direction of the Engineer-in-charge.
39	Providing & fitting, fixing of MK1 starter Aux. contact block :1 NO+1NCCat No. SS90120000L&T makeas per specification and direction of the Engineer-in-charge.
40	Providing & fitting, fixing of MK1 starter push bottom unit Cat No. SS90004000L&T makeas per specification and direction of the Engineer-in-charge
41	Providing & fitting, fixing of MK1 starter Arc shieldCat No. SS50004000L&T makeas per specification and direction of the Engineer-in-charge
42	Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to IScode for submersible motor withall necessary equipments & fitting s as requiredas per specification and direction of the Engineer-in-charge.i.4.0 sqmm
43	ii.10.0 sqmm