Bharat Sanchar Nigam Limited-BSNL has published Tender For Dismantling Of Aluminium Partitions, False Ceiling And Csc Counters, Repairs To Toilet Blocks And External Painting To Dto Building At Gulbarga.. Submission Date for this Tender is 16-01-2024. Dismantling Work Tenders in gulbarga Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 2 | Dismantling CSC counters ( assembled usingplywood, blockboard, wooden beading, Glazing, SS supports etc)of average table height of 81 cms,fixed to the ground and separated by plywood extension with drawers and vertical glazing of height 60 cms above table top. Work includes dismantling individual counters in their assembed state ( after separating the glazing)transporting and stacking them for all lifts andwithin 50mts lead,as directed by Engineer-in-charge. |
| 3 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 4 | Cutting branches of trees ofgirth (measured at a distance of 1 m from trunk) including cutting of trunks and branches,and stacking of serviceable material and disposal of unserviceable material. |
| 5 | Beyond 20 cm girth up to and including 60 cm girth |
| 6 | Uprooting of plants,shrubs,small trees from walls,slabs, chajjas etc.including using concentrated acidfor embeded and deep rooted stems & roots , cleaning of surrounding areas of DTO building within the compound and disposal of debris/solid waste to the municipal dumping yard, all complete as per the direction of engineer in charge (at all heights)for the entire DTO building . |
| 7 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 8 | In cement mortar |
| 9 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 10 | G.S. Sheet |
| 11 | Shifting in closed container, dismantled partition, false ceiling, CSC counters and other miscellaneous useful material lying in DTO compound( at all floors) to the E10B compound Gulbarga, including the cost of labour(loading and unloading),tools & equipmentsetc. and including stacking the material at all floors as directed by Engineer in charge. |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 13 | Providing and fixing to existing door frames. |
| 14 | 30 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 15 | Acid cleaning of WC and Bath ceramic/ glazed tiles in floor and dado using Concentrated Hydrochloric acid as per the directions of engineer in charge. |
| 16 | Removing dry or oil bound distemper, water proofing cement paint, synthetic enameland the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 17 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : |
| 18 | Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)over existing cement paint surface |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 20 | One or more coats on old work. |
| 21 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 22 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 23 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 24 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 25 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 26 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 27 | 10 litre capacity - coloured |
| 28 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 29 | Semi rigid pipe |
| 30 | 32 mm dia |
| 31 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 32 | 15 mm nominal bore, 165 mm long. Weighing not less than 110 gms. |
| 33 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 34 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 35 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 36 | 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. |
| 37 | Providing and fixing PTMT grating of approved quality and colour. |
| 38 | Circular type. |
| 39 | 100 mm nominal dia. |
| 40 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 41 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 42 | 40 mm nominal bore, 206mm long, weighing not less than 690 gms |
| 43 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 44 | 15 mm nominal bore with 30 cm length. |
| 45 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes,min. grade of SCH 40confirming to ASTM D1785,D2466 for cold water supply, including all uPVC plain & brass threaded fittings, and including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 46 | 15 mm nominal outer dia. Pipes. |
| 47 | 20 mm nominal outer dia. Pipes. |
| 48 | 25 mm nominal outer dia. Pipes. |
| 49 | 40 mm nominal outer dia. Pipes. |
| 50 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 52 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 53 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 54 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 55 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 56 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 57 | 1:6 (1 cement: 6 fine sand) |
| 58 | 6 mm cement plaster of mix : |
| 59 | 1:3 (1 cement: 3 fine sand) |
| 60 | Cleaning and de-silting of GT chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 61 | Refixing of Wash Basin including making good the walls and floors,replacing bolts/brackets , fixing PTMT waste coupling 32 mm dia and connecting to the new water supply and sanitary lines( as required) all complete as directed by the Engineer in Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
