Indian Institute Of Information Technology-IITM has published Tender For Renovation Work In Prayas Classes At Iiita. Submission Date for this Tender is 29-01-2024. Excavation Work Tenders in prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-01-2024 |
| Sl. No. | Item Description |
| 1 | RENOVATION WORK IN PRAYAS CLASSES AT IIIT-A (as per Annexure-III) Applicable DSR mentioned as per Tender docuemnts. If any typographical error kindly refer to tender documents. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (DSR 2021, 2.8.1) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 2021, 4.1.10) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)(DSR 2021, 6.1.1) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)(DSR 2021, 6.4.2) |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (DSR 2021, 2.25) |
| 7 | CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking Lime, moorum, building rubbish 1 km(DSR 2021, 1.1.1) |
| 8 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. (DSR 2021, 11.26) |
| 9 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and`pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR 2021, 11.27) |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm. (DSR 2021, 11.41.2) |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(DSR 2021, 8.31) |
| 12 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR 2021,15.56) |
| 13 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (DSR 2021,15.2.1) |
| 14 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil (DSR 2021,2.28.1) |
| 15 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below (DSR 2021,15.13.1) |
| 16 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below (DSR 2021,15.13.2) |
| 17 | CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR 2021,13.4.2) |
| 18 | CEMENT PLASTER (IN COARSE SAND) 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) (DSR 2021,13.5.2) |
| 19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block boardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (DSR 2021,9.21.2) |
| 20 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR 2021,10.1) |
| 21 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats (DSR 2021,14.2.1) |
| 22 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (DSR 2021,9.96.1) |
| 23 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm (DSR 2021,9.97.1) |
| 24 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm (DSR 2021,9.100.1) |
| 25 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc complete.Twin rubber stopper. (DSR 2021,9.101.2) |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (DSR 2021,17.2.1) |
| 27 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR 2021,17.1.1) |
| 28 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (DSR 2021,17.7.2) |
| 29 | Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) (DSR 2021,4.10) |
| 30 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 2021,5.3) |
| 31 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (DSR 2021,5.22A.6) |
| 32 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (DSR 2021, 4.3.2) |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR 2021,13.80) |
| 34 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. Two or more coats on new work. (DSR 2021,13.42.1) |
| 35 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR 2021,13.46.1) |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. (DSR 2021,13.61.1) |
| 37 | Suppy & Fixing of new mirror of 5mm thick of saint gobain / Modi guard make with back support PVC sheet 6mm thickness and framing with 2" width provision of mounting / hanging arrangement. |
| 38 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore.L.S. Quantity (DSR 2021,18.12.3) |
| 39 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore.L.S. Quantity (DSR 2021,18.11.1) |
| 40 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (DSR 2021,14.81) |
| 41 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore (DSR 2021,18.17.1A) |
| 42 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. (DSR 2021,18.49.1) |
| 43 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (DSR 2021,18.52.1) |
| 44 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. (DSR 2021,18.53.1) |
| 45 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(DSR 2021,17.16A) |
| 46 | Providing and fixing nahani Trap with S.S. or C.P. brass jali. |
| 47 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (DSR 2021,11.3.1) |
| 48 | S& F of PVC Pipe of 150 mm dia of 6kg/cm capacity with all requires fittings for proper completion of work in all respect. |
| 49 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand). (DSR 2021,13.7.1) |
| 50 | Electrical Item : Supplying and embedding following dia G.I. pipe (medium class) in pole collar / foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia |
| 51 | Supply & Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre |
| 52 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Cable size:-3 X 10 sq. mm (22mm) |
| 53 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 54 | Laying one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq.mm |
| 55 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq.mm (clamped with 1mm thick saddle) |
| 56 | Supplying & fixingfollowing modular switch / socket on the exisiting modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 switch |
| 57 | 15/16 switch |
| 58 | 6 pin 15/16 socket outlet |
| 59 | Supplying & fixingfollowing way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper busba, nuetral busbar, din bar, interconnection, powder painted including earthing etc, as required. (but without MCB/RCCB/Isolator) 6 way Double Door |
| 60 | Supplying & fixingfollowing rating, double pole (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc as required. 25A |
| 61 | Supplying & fixing 5A to 32 A rating , 240/415V, 10kA, C curve MCB suitable for inductive load of following poles in the existing MCB- DB complete with connection, testing and commissioningetc. as required. Single pole |
| 62 | Supplying & fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 63 | Supplying and fixing following size/ modules, GI box / PVC boxalongwith modular base & cover plate for modular switches in recess etc. as required. 2 Module (75mmX75mm) |
| 64 | 3 Module (100mmX75mm) |
| 65 | 6 Module (200mmX75mm) |
| 66 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.group C Point. |
| 67 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. |
| 68 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. upto 450mm sweep |
| 69 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 70 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 71 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 72 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 73 | Supply of Exhaust Fan 300 mm sweep, 1200/1400 rpm single phase, ISI Mark, Heavy Duty Toilet Exhaust Fan, IS & IP 55, make -Bajaj, Crompton, Havells, Usha or approved equivalent make |
| 74 | Providing and Fixing of Mosquito net for Exhaust Fan |
| 75 | Providing and Fixing of LED light with fitting (2x 8 to 10 Watt LED light) |
| 76 | Providing and Fixing ofLED light with fitting (1x 5 to 7 Watt LED light) |
| 77 | Providing and Fixing of18/20 watt LED batten Tube light with fitting |
| 78 | Supply of 3 core 10 sqmm Aluminium Armoured cable , 1.1 kV grade, XLPE insulated PVC sheathed Armoured Aluminium cable, IS 1554 PART-I, Make- KEI, Gloster, National, Seichem, Havells or approved make |
| 79 | Supplying & installation of LED post top pole light, 35/40 Watt, IP55/66, ISI mark complete in all manner , Water proof Weather proof outdoor light, Make- WIPRO, Philips, Crompton, Havells or approved make |
| 80 | Pole Mounted Junction Box /cut out box/ fusebox for road light /street/park lightfor single /three phase ,4 core cable use , high wattage based light system for industrial applications size approx (HxWxD inside)240x130x110 model/produict code- GSJB-2817 , Make Sintex, SMC product , single pole 6/10 am, 10kA, C type MCB, 3 phase terminal and connector rail, IP55, complete in all manner. OrMS BOX, 16SWG,CRCA sheet, 2 powder coataluminium paint, water and weather proof, with bakalite sheet back insulation, 30A,500V connector 8way,with locking arrangement approximate size – 200 x 200 x 100mm, with mounting clamp and complete in all manner as per IS |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
