Tender For Expansion Of Existing Anesthesia Office Block For New Seminar Room Fully Furnished And Department Library At Level 3 In Govt. Medical College And Hospital Jammu., jammu-Jammu And Kashmir

Expansion Of Existing Anesthesia Office Block For New Seminar Room Fully Furnished And Department Library At Level 3 In Govt. Medical College And Hospital Jammu.- 1 Demolishing of Terrazo flooring/wall cladding/ Tile work etc. by chiesel and hammer including disposal of mulba 2 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 3 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) 4 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 5 dismantling of iron partition works including cutting floor embeded iron frame work/door/glass work etc complete including stacking of seriscable material to designated place. 6 charge for welding machine 7 welder 8 mazdoor 9 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave , holdfasts etc. complete and stacking with in 50 meters lead : of area of 3 sqm and below doors,windows,vent 10 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar 11 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Mud Mortar 12 Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) 13 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 14 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. 15 Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. 16 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) 17 Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete 18 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm 19 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm 20 labour engaged for shifting of all dismantled mubla from level 3 to ground floor and outside building to dumping site for further disposal by mechanical transport 8 mazdoors 21 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 22 For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns) 23 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns) 24 Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). 25 GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingand perforation, and backed with a black Glass fiber acoustical fleece. 26 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) 27 providing and fixing ACP sheet for doors and shutters 28 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floorfinishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness. 29 Providing and fixing aluminum fittings as per direction of Engineerin charge 30 door handle 200 mm 31 handle 150 mm 32 Tower bolt 150 mm 33 tower bolt 300 mm 34 silding bolt 300 mm 35 Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete 36 fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with aluminum bidding 37 dismantling tile work in floors and roofs laid in cement mortar including stacking material wlithin50 meters lead for thickness of tiles 10mm to 25mm 38 providing and fixing digital designer wall tile 600x300 mm including 12 mm thick plaster including lead lift complete job 39 providing and fixing anti skid floor tile 600x600 mm including 20 mm thick plaster including lead lift complete job 40 23.2.1 Using rough kota stone. sqm 2156.30 23.3 Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. Per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). 41 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: 42 Range of three squatting plates with 10 liter P.V.C. automatic flushing cistern. 43 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 44 providing and fixing sanitary fitting (cera/jaquarKorvit or equivalent as per direction of Engineer in charge 45 angle valve 46 bib cock 47 long nose bib cock 48 c.p jet 49 shower 6 dia 50 extension nipples 51 soap case 52 c.p ring (towel) 53 PVC waste pipe 54 PVC connection 55 C.P towel rod 20 56 looking glass30 x20 57 P/F Ball valve 58 25mm 59 20mm 60 15mm 61 40mm 62 providing and fixingmixture 63 c.p gratting 64 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 65 15 mm dia. nominal bore 66 20 mm dia. nominal bore 67 25 mm dia. nominal bore 68 plumber engaged for fitting 69 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 70 15mm 71 20mm 72 25mm 73 40mm 74 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc40 mm dia. nominal bore 75 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 76 75mm diameter 77 110 mmdiameter 78 providing and fixing PVC Fitting 79 75 mm dia door blend 80 110 mm dia plain blend 81 75mm dia plain blend 82 110 mm dia door T 83 110mm dia T junction 84 reducer T 110 dia to 75 mm 85 PVC floor trap 86 Providing and fixing PVC Panelling in walls all fittings complete job 87 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm 88 tower bolt 300 mm 89 sliding bolt 300 mm 90 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 91 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick 92 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface 93 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. 94 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class teak wood 95 providing and fixing 19mm thick ply with fevicol nails complete job 96 providing and fixing 6mm thick ply with fevicol nails complete job 97 providing and fixing mat fournish mica with fevicol nails compete job 98 labour engaged for shifting of construction material from dumping site to level 3 site of work manually 99 carriage of bricks for an average distance of 15 km by MT 100 carriage of material by MT for average 10 km complete 101 sand 102 bajree 103 disposal of mulba engaging trolly

INR 1000 /-

INR 136600.0 /-

Refer document

Name of Work:-Expansion of existing anesthesia office block for new seminar room fully furnished and Department library at level 3 in Govt. Medical College and hospital Jammu.

Sl. No.	Item Description
1	Demolishing of Terrazo flooring/wall cladding/ Tile work etc. by chiesel and hammer including disposal of mulba
2	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8
3	Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix)
4	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
5	dismantling of iron partition works including cutting floor embeded iron frame work/door/glass work etc complete including stacking of seriscable material to designated place.
6	charge for welding machine
7	welder
8	mazdoor
9	Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave , holdfasts etc. complete and stacking with in 50 meters lead : of area of 3 sqm and below doors,windows,vent
10	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar
11	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Mud Mortar
12	Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)
13	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
14	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more.
15	Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.
16	15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)
17	Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
18	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm
19	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm
20	labour engaged for shifting of all dismantled mubla from level 3 to ground floor and outside building to dumping site for further disposal by mechanical transport 8 mazdoors
21	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
22	For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns)
23	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns)
24	Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).
25	GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingand perforation, and backed with a black Glass fiber acoustical fleece.
26	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
27	providing and fixing ACP sheet for doors and shutters
28	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floorfinishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness.
29	Providing and fixing aluminum fittings as per direction of Engineerin charge
30	door handle 200 mm
31	handle 150 mm
32	Tower bolt 150 mm
33	tower bolt 300 mm
34	silding bolt 300 mm
35	Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete
36	fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with aluminum bidding
37	dismantling tile work in floors and roofs laid in cement mortar including stacking material wlithin50 meters lead for thickness of tiles 10mm to 25mm
38	providing and fixing digital designer wall tile 600x300 mm including 12 mm thick plaster including lead lift complete job
39	providing and fixing anti skid floor tile 600x600 mm including 20 mm thick plaster including lead lift complete job
40	23.2.1 Using rough kota stone. sqm 2156.30 23.3 Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. Per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
41	Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required:
42	Range of three squatting plates with 10 liter P.V.C. automatic flushing cistern.
43	Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
44	providing and fixing sanitary fitting (cera/jaquarKorvit or equivalent as per direction of Engineer in charge
45	angle valve
46	bib cock
47	long nose bib cock
48	c.p jet
49	shower 6" dia
50	extension nipples
51	soap case
52	c.p ring (towel)
53	PVC waste pipe
54	PVC connection
55	C.P towel rod 2"0"
56	looking glass3"0" x2"0"
57	P/F Ball valve
58	25mm
59	20mm
60	15mm
61	40mm
62	providing and fixingmixture
63	c.p gratting
64	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:
65	15 mm dia. nominal bore
66	20 mm dia. nominal bore
67	25 mm dia. nominal bore
68	plumber engaged for fitting
69	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
70	15mm
71	20mm
72	25mm
73	40mm
74	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc40 mm dia. nominal bore
75	Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
76	75mm diameter
77	110 mmdiameter
78	providing and fixing PVC Fitting
79	75 mm dia door blend
80	110 mm dia plain blend
81	75mm dia plain blend
82	110 mm dia door T
83	110mm dia T junction
84	reducer T 110 dia to 75 mm
85	PVC floor trap
86	Providing and fixing PVC Panelling in walls all fittings complete job
87	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm
88	tower bolt 300 mm
89	sliding bolt 300 mm
90	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
91	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick
92	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
93	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
94	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class teak wood
95	providing and fixing 19mm thick ply with fevicol nails complete job
96	providing and fixing 6mm thick ply with fevicol nails complete job
97	providing and fixing mat fournish mica with fevicol nails compete job
98	labour engaged for shifting of construction material from dumping site to level 3 site of work manually
99	carriage of bricks for an average distance of 15 km by MT
100	carriage of material by MT for average 10 km complete
101	sand
102	bajree
103	disposal of mulba engaging trolly