}

Tender For Ferritic Steel Coil 2X1250mm, kapurthala-Punjab

Rail Coach Factory has published Tender For Ferritic Steel Coil 2X1250mm. Submission Date for this Tender is 06-11-2023. Railway Ancillaries Tenders in kapurthala Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

40471044
Tender For Ferritic Steel Coil 2X1250mm
Tender
Indian
Punjab
Kapurthala
06-11-2023

Tender Details

Supply Of Ferritic Steel Coil 2X1250mm., As Per Drawing: Rdso Spec. No. C-K201, Grade X2crni12 ( 409M ) Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instruction: Stainless Steel Sheets, Coils And Plates:- ( A ) Stainless Steel ( Austenitic & Ferritic Steel ) Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I ) Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii ) Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii ) Outer & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv ) Side Of The Coil Should Be Covered With Card Board Sheet. V ) After This Whole Coil Should Be Wrapped With Biodegradeable Plastic Sheet Of Suitable Thickness. Vi ) The Inner Edge Of The Coil Should Be Protected By Gi Ring Followed By Another Iron Ring. Vii ) Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii ) Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumference Of The Eye. Ix ) Whole Coil Should Be Mounted On Wooden Blocks For Easy Lifting / Stacking. X ) The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi ) The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. ( B ) Stainless Steel ( Austenitic & Ferritic Steel Plates / Sheets ) I ) The Sheets / Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+ / -10% & Each Sheet / Plate Shall Be Seprated With A Layer Of Water Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer Of Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Metal Protection In Edges Should Also Be Provided. Ii ) All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid ( Wooden Packing Under Neath ) To Facilitate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At The Cost Of Supplier. , Proction Procedure: Covered In Pi [ Warranty Period: 30 Months After The Date Of Delivery ] => Limited

Key Value

Document Fees
Refer document
EMD
INR 81180.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail