Tender For Fabrication And Erection Job Work, palwal-Haryana

Tender For Fabrication And Erection Job Work- 1 M.S Pipe Line, Dismantling Of Pipe Lines 1” To 3’’ 2 Do- 4’’To 11’’ 3 Do- 12” To 20” 4 Do- 21’’ To48’’ 5 M.S Pipe Line, Erection Of Pipe Line From 1” To 3” Dia 6 Do-4” To 11” 7 Do-12To20 8 Do- 21 To 48 9 Fabrication Of Pipe Line From 12”Above 10 Flanges And Blind Up To 48”, Dismantling Of Flanges / Blind 11 Refitting Of Old / New Flanges / Blind 12 Fabrication Of Flanges Blind From M.S. Plate Up To 48” 13 Dismantling Of Bends, Reducersandnipples ( Up To 1’’ To 12’’ ) , 14 Fabrication Of Bends, Reducersandnipples ( Up To 1’’ To 12’’ ) , 15 Fitting Of Bends, Reducersandnipples ( Up To 1’’ To 12’’ ) , 16 Dismantlingof Reducersand Nipples ( Above 12’’ ) 17 Fabrication Of Reducersand Nipples ( Above 12’’ ) 18 Fitting Of Reducersand Nipples ( Above 12’’ ) 19 Dismantling Of M.S. / G.L Pipe Accessories ( Tee, Cross , Distance Pieceup To 12’’ ) 20 Fabrication Ofm.S. / G.L Pipe Accessories ( Tee, Cross , Distance Pieceup To 12’’ ) 21 Erectionof M.S. / G.L Pipe Accessories ( Tee, Cross , Distance Pieceup To 12’’ 22 Dismantling Of M.S. / G.L Pipeaccessories ( Tee, Cross, Distance Piece Above 12’’ ) 23 Fabrication Ofm.S. / G.L Pipeaccessories ( Tee, Cross, Distance Piece Above 12’’ ) 24 Erection Of Of M.S. / G.L Pipeaccessories ( Tee, Cross, Distance Piece Above 12’’ ) 25 Dismantling Of M.S.Tanks, / Vesselsfrom M.S Plates, Angle M.S Channel ‘I’ Section Etc ( Up To 6 Mm Plate ) 26 Fabricationofm.S.Tanks, / Vesselsfrom M.S Plates, Angle M.S Channel ‘I’ Section Etc ( Up To 6 Mm Plate ) 27 Erection Of M.S.Tanks, / Vesselsfrom M.S Plates, Angle M.S Channel ‘I’ Section Etc ( Up To 6 Mm Plate ) 28 Dismantling Of M.S. Plate Jobs On Boiler Ducting Boiler Casing Etc. ( Above 6Mm Plate ) 29 Fabrication Of M.S. Plate Jobs On Boiler Ducting Boiler Casing Etc. ( Above 6Mm Plate ) 30 Erectionof M.S. Plate Jobs On Boiler Ducting Boiler Casing Etc. ( Above 6 Mm Plate ) 31 Dismantling Of Railing 32 Fabrication Of Railing 33 Erectionof Railing 34 Dismantlingof Valves1’’ To 6’’ 35 Dismantling Of Valves 7’’ To 12’’ 36 Dismantling Of Valves Above 12’’ Size 37 Fitting Of Valves 1’’ To6’’ 38 Fitting Of Valves 7’’ To 12’’ 39 Fitting Ofvalves Above 12’’ Size 40 Dismantling Of S.S Pipe Line All Sizes 41 Erection Of S.S Pipe Line All Sizes 42 Dismantling Of S.S.Pipe Accessories ( Tee, Cross, Distance Piece, Nipples Reducer And Bend ) Up To 12 43 Fabrication Of S.S.Pipe Accessories ( Tee, Cross, Distance Piece, Nipples Reducer And Bend ) Up To 12 44 Erectionof S.S.Pipe Accessories ( Tee, Cross, Distance Piece, Nipples Reducer And Bend ) Up To 12 45 Patch Work On Tankandpipe ( M S Plate Cutting, Fittingandwelding, 02 Round Welding ) 46 Dismantling Of Cone, Bigger Size Will Be Treated 47 Fabrication Of Cone, Bigger Size Will Be Treated 48 Erection Of Cone, Bigger Size Will Be Treated 49 Dismantling, Fabricationanderection Of Gutter Of Any Size By Required Thickness. 50 Dismantling , Fabricationanderection Ofhoodof Cutter , Chopper And Leveler By 8 / 6 Mm M.S. Plate 51 Dismantling , Fabricationanderectionof M.S Boiler Chimney Base Dia= 3.5 M, Top Dia= 2.5M, Height=30-32M 52 Dismantlingof Oldanderection Of New I D Fan Taper Cone. 53 Dismantling , Fabricationanderection Of Old Ducting Fromi.D. Fan Inlet Damper To I D Fan . 54 Dismantling , Fabricationanderection Of Flue Gas Ducting Size 5’ X 5’ Before Id Fans 55 Dismantling, Fabricationanderection Of I.D.. Fan Casingfrom8 To 10Mm M.S Plate .Size 5’X5’ 56 Dismantling, Fabricationanderection Of I.D. Fan Inlet Damper 57 Dismantling , Fabricationanderectionof Bagasse Elevator, Bagasse Carrierandrbc Bottom And Sideplate Worn Out Portion 58 Dismantling , Fabricationanderection Of Boiler Bagasse Feeding Chute By 8 / 6 Mm M.S. Plate. 59 Dismantling, Erection And Fabrication Of Umbrella Of Pan. 60 Dismantling, Fabricationand Erection Of Save All Of Quad Body. 61 Dismantling, Fabricationanderection Of Save All Of Pan. 62 Stair Case ( Dismantling, Fabrication & Erectionwith Chequered Plate / Old Plate And Pipe Line ) 63 Dismantling And Erection Of Pump Up To 4’’ Suction Andup To 15 Hp Motor. 64 Dismantlinganderection Of Pump More Than 4” Suction And16 H.P Motor Or More 65 Dismantling Of Ammoniaandgas Coils 66 Fabricationof Ammoniaandgas Coils 67 Erection Of Ammoniaandgas Coils 68 Dismantling Ofnew Plate Form Asper Requirement From Old M S Plate 6Mm To 8 Mm Thickness, Up To 2 Sqm. 69 Fabrication Ofnew Plate Form Asper Requirement From Old M S Plate 6Mm To 8 Mm Thickness, Up To 2 Sqm. 70 Erectionofnew Plate Form Asper Requirement From Old M S Plate 6Mm To 8 Mm Thickness, Up To 2 Sqm. 71 Dismantling Of New Plate Form By M S / Chequered Plate More Than 2 Sq.Mtr 72 Fabrication Of New Plate Form By Mschequered Plate More Than 2 Sq.Mtr 73 Erectionof New Plate Form By M S / Chequered Plate More Than 2 Sq.Mtr 74 Dismantling Of Crystallizer Coils 75 Fabrication Of Crystallizer Coils 76 Erection Of Crystallizer Coils 77 Dismantling Of Old Andworn Out Staging 78 Fabrication Of Old Andworn Out Staging 79 Erection Of Old Andworn Out Staging 80 Repairing Of Rubber Seat Of Exhaust / Vapor Valveabove 16 “ 81 Dismantling , Fabricationanderection Of Mill Juice Tray By8 Mm / 10 Mm M.S Plate 82 Dismantlingof Existing Cane Carrier Chute And Fabricationanderection From 8 To 10 Mm M.S Plate 83 Repairing Of Steam Jacket For Sulphur Furnace 84 Replacement Of Steam Jacket Of Evaporator Bodies 85 Strengthening Of Vapour Line Above 16” Diaby Innerandouter Side Ring Of Angle / Pipes 86 Dismantling , Fabricationanderection Ofsupport Of Angle, Pipe, Channel At Any Equipment 87 Dismantlingof Hopper Centre Piece By 12 Mmplate 88 Fabrication Of Hopper Centre Piece By 12 Mmplate 89 Erection Of Hopper Centre Piece By 12 Mmplate 90 Dismantlingof Hopper Tray 91 Fabrication Of Hopper Tray 92 Erectionof Hopper Tray 93 Sulphur Furnace Cooler Dismantling, Fab. Anderection Work 94 Sulphur Furnace Scrubber Dismantling , Fabrication Anderectionwork 95 ‘B’ Vacuum Crystallizer Shell To Be Changed From10 Mm M.S.Plate 96 ‘C, Vacuum Crystallizer Shell To Be Changed From 10 Mm M.S.Plate 97 Strengthening Of Factory Columns Of Various Size By 10 Mm M.S. Plate, Angle, Channels Etc 98 Strengthening Of Factory Beams Of Any Size By M.S. Plate, Angle, Channel, I. Section Etc 99 Chipping, Cleaning And Painting Of Machinery Columns And Beams Or Staging Of Factory Machinery. 100 Painting One Coat With Ready Mixed Paint In Factory Building M.S. Columns ( 25 Mtr Approx. Height. And 15-5 Mtr Height Approx ) And M.S Trusses Including Rubbing Down Old ( If Required At Site. All The Bracing And Purlins Are Included With This Work. 101 Dismantling, Fabrication And Erection Of Any Sizefactory / Building, Columns Beams And Trusses 102 Dismantling , Fabrication And Erection Of Worn Out Water Pipes, Nozzles, Drain Box Etc. 103 Dismantling, Fabrication And Erection Of Worn Out Shell Ofboth Wet Scrubber 104 Dismantling, Fabrication And Erection Of Worn Out Internal Of Both Wet Scrubber 105 Dismantling, Fabrication And Erection Of Wornout Flue Gas Ducting Size 5’ X5’Of Both Wet Scrubber From Damper To Chimney 106 Replacement Of Worn Out Portion Of Supports Of Molasses Tank Roof. 107 Replacement Of Worn Out Portion Ofroof Of Molasses Tank. 108 Dismantling Of Boiler Exit Flue Gas Damper. 109 Dismantling, And Erection Of Boiler I.D., F.D. Fan Impeller. 110 Replacement Of Weak Portion Of Molasses Tank Up To A Height Of10 Mtr By 6 Mm, 8 Mm, 10 Mm, 12 Mm Plate Etc. 111 Dismantlingandassembling Of Air Heater Outlet Ducting. 112 Replacement Of Worn Out Air Heater Tubes. 113 Dismantling, Fabrication, Erection Of Worn Out Bothboilers Blow Down Line From Boiler To Drain Pit. 114 Dismantling, Fabrication, Erection Of Worn Out Of 5” Long Bend Of Feed Water Line Header. 115 Removal Of Hanging Old Lagging And Fixing Of New Glass Wool, Plastered By P.O.P Or Hasean Cloth And Covered With Wire Netting ( Murga Jali ) Without Material Up To 75 Mm Thickness 116 Replacement Of Juice Heater Partition Plate In All Respects. 117 Pan No.1 Top Cone Replacement Work. 118 Reconditioning Of Worn Outjuice Heaters 02 Nos.Covers & Grooves With Respect To Its Top / Bottommating Outside Covers 119 Dismantling Of 6 Dia C.I. Cross. 120 Erection Of 6 Dia C.I. Cross. 121 Dismantling , Fabrication, Erection Of 10 X 20 Vacuum Filter Mud Tray. 122 Dismantling Of Worn Out Body Shell Of Pan. 123 Fabricationanderection Of Body Shell Pan. 124 Dismantling , Fabrication, Erection Of 8 X 16 Vacuum Filter Mud Tray. 125 Juice Heaterboth Covers To Be Dismantle And Erection After Machining Work At Both Shafts. 126 Dismantling Of Worn Out Bottom And Fabrication And Erection Of New Bottom Of H-Crystallizers. 127 Dismantling, Fabrication And Erection Of M.S Bend 12” To 20”. 128 Dismantling, Fabrication And Erection Of M.S Bend 21” To 40”. 129 Dismantling Of New Evaporator ( Quad ) Body S.S. Tubes 130 Re-Tubing Of New Evaporator ( Quad ) Body 131 Dismantling Of Vc-1100 M3 S.S. Tubes 132 Re-Tubing Of Vc-1100 M3 S.S. Tubes 133 Increasingthe Length Of Hydraulic Grab Fingers 134 Dismantling , Fabrication, Erection Ofkicker Drum With Holder Assembly 135 Dismantling, Erection Commission Of Pan Discharge Valve Of Pan. 136 Modification Of Mill Kush Kush Conveyor 137 Fabrication, Erection Of New Juice Dorr Filtration System. 138 Dismantling, Fabrication, Erection Offlocculating Chamber Topandbottom Plate Of Dorr. 139 Crystallizer Spiral Ribbon Strip Has To Dismantle And Again Set Right Fitting And Worn Out Armsandother Related Work Also To Be Done. 140 Dismantling , Fabrication, Erection Ofworn Out Runner Of Cane Carrier / Bagasse Elevator / Rbc / Mbc Cane Rake Elevator. 141 Dismantling, Fabrication And Erection Of Agitator Of Vacuum Filter. 142 Dismantling, Fabrication, Erection Ofworn Out Portion Of D.S.M. Screen 143 Fabrication, Erection Ofi.D Fan Cone Ring With Flange 144 Erectionandcommissioning Ofb- Messecuite C / F Machine Including Machine Structure, Leveling Of Machine And Related Work To Be Done In All Respect Of M / C 145 Dismantling Of Oldworn Out And Fabrication, Erection Ofnew Juice Sulphitor Internal Drum 146 Juice Ring Fabrication By 6Mm Plate For Mill Rollers 147 Hinge Type Cover Fabrication At Copper, Levelerandcutter 148 Boilers No.26” Live Steam Line From Boiler No.2 To Main Steam Distributer To Be Modified 149 Boiler Feed Tank Replacement 150 All Bagasse Chute Of Both Boilers To Be Modified 151 Rack And Pinion To Be Fitted In Mbc At Bagasse Loading Chute. 152 Labour Supply ( Per Day 8 Hr. Basis ) Turner / Machinist 153 Labour Supply ( Per Day 8 Hr. Basis ) Fitter 154 Labour Supply ( Per Day 8 Hr. Basis ) Welder 155 Labour Supply ( Per Day 8 Hr. Basis ) Helper 156 Labour Supply ( Per Day 8 Hr. Basis ) Khallasi 157 Dismantling, Fab. & Erection Of Tail End Shaft, Idler Shaft And Driving Shaft With Plumber Blocks & Driving Unit Etc For B.E, Rbc & Mbc. 158 Dismantling, Fab. & Erection Of Cane Carrier & Cane Rake Elevator Shaft.

Refer document

INR 250000.0 /-

Refer document

Name of Work: Tender for Fabrication and erection Job work.

Sl. No.	Item Description
1	M.S Pipe Line, Dismantling of pipe lines 1” to 3’’
2	do- 4’’to 11’’
3	do- 12” to 20”
4	do- 21’’ to48’’
5	M.S Pipe Line, Erection of pipe line from 1” to 3” dia
6	do-4” to 11”
7	do-12to20
8	do- 21 to 48
9	Fabrication of pipe line from 12”above
10	Flanges and blind up to 48”, dismantling of flanges/blind
11	refitting of old/new flanges/blind
12	fabrication of flanges blind from M.S. plate up to 48”
13	Dismantling of Bends, reducersandnipples (up to 1’’ to 12’’),
14	Fabrication of Bends, reducersandnipples (up to 1’’ to 12’’),
15	Fitting of Bends, reducersandnipples (up to 1’’ to 12’’),
16	Dismantlingof Reducersand nipples (above 12’’)
17	Fabrication of Reducersand nipples (above 12’’)
18	Fitting of Reducersand nipples (above 12’’)
19	Dismantling of M.S. / G.l pipe Accessories (Tee, cross ,distance pieceup to 12’’)
20	Fabrication ofM.S. / G.l pipe Accessories (Tee, cross ,distance pieceup to 12’’)
21	Erectionof M.S. / G.l pipe Accessories (Tee, cross ,distance pieceup to 12’’
22	Dismantling of M.S. / G.l pipeAccessories (Tee, cross, distance piece above 12’’)
23	Fabrication ofM.S. / G.l pipeAccessories (Tee, cross, distance piece above 12’’)
24	Erection of of M.S. / G.l pipeAccessories (Tee, cross, distance piece above 12’’)
25	Dismantling of M.S.tanks,/Vessels from M.S plates, angle M.S channel ‘I’ section etc ( up to 6 mm plate )
26	FabricationofM.S.tanks,/Vessels from M.S plates, angle M.S channel ‘I’ section etc( up to 6 mm plate )
27	Erection of M.S.tanks,/Vessels from M.S plates, angle M.S channel ‘I’ section etc ( up to 6 mm plate )
28	Dismantling of M.S. plate jobs on boiler ducting boiler casing etc.( above 6mm plate)
29	Fabrication of M.S. plate jobs on boiler ducting boiler casing etc.(above 6mm plate)
30	Erectionof M.S. plate jobs on boiler ducting boiler casing etc.(above 6 mm plate)
31	Dismantling of railing
32	Fabrication of railing
33	Erectionof railing
34	Dismantlingof Valves1’’ to 6’’
35	Dismantling of valves 7’’ to 12’’
36	Dismantling of valves above 12’’ size
37	Fitting of valves 1’’ to6’’
38	Fitting of valves 7’’ to 12’’
39	Fitting ofvalves above 12’’ size
40	Dismantling of S.S Pipe Line all sizes
41	Erection of S.S Pipe Line all sizes
42	Dismantling of S.S.pipe Accessories(tee,cross, distance piece, nipples reducer and bend) up to 12
43	Fabrication of S.S.pipe Accessories(tee,cross, distance piece, nipples reducer and bend) up to 12
44	Erectionof S.S.pipe Accessories (tee,cross, distance piece, nipples reducer and bend) up to 12
45	Patch Work on tankandpipe (M S plate cutting, fittingandwelding, 02 round welding)
46	Dismantling of cone, bigger size will be treated
47	Fabrication of cone, bigger size will be treated
48	Erection of cone, bigger size will be treated
49	Dismantling, FabricationandErection of gutter of any size by Required thickness.
50	Dismantling , fabricationanderection ofhoodof cutter ,chopper and leveler by 8/6 mm M.S. Plate
51	Dismantling , fabricationanderectionof M.S Boiler Chimney Base Dia= 3.5 M, Top Dia= 2.5m, Height=30-32m
52	Dismantlingof oldanderection of new I D Fan taper cone.
53	Dismantling , Fabricationanderection of old ducting fromI.D. fan inlet damper to I D Fan .
54	Dismantling , Fabricationanderection of flue gas ducting size 5’ x 5’ before ID fans
55	Dismantling, fabricationanderection of I.D.. fan casingfrom8 to 10mm M.S plate .Size 5’x5’
56	Dismantling, fabricationanderection of I.D. Fan inlet damper
57	Dismantling ,fabricationandErectionof Bagasse elevator, bagasse carrierandRBC bottom and sideplate worn out portion
58	Dismantling , fabricationanderection of Boiler bagasse feeding Chute by 8/6 mm M.S. plate.
59	Dismantling, erection and fabrication of umbrella of Pan.
60	Dismantling, fabricationand erection of save all of Quad body.
61	Dismantling, FabricationandErection of save all of Pan.
62	Stair case( Dismantling, Fabrication & Erectionwith chequered plate/old plate and pipe line)
63	Dismantling and erection of pump up to 4’’ suction andup to 15 HP motor.
64	Dismantlinganderection of pump more than 4” suction and16 H.P motor or more
65	Dismantling of Ammoniaandgas coils
66	Fabricationof Ammoniaandgas coils
67	Erection of Ammoniaandgas coils
68	Dismantling ofnew plate form asper requirement from old M S plate 6mm to 8 mm thickness,up to 2 sqm.
69	Fabrication ofnew plate form asper requirement from old M S plate 6mm to 8 mm thickness,up to 2 sqm.
70	Erectionofnew plate form asper requirement from old M S plate 6mm to 8 mm thickness, up to 2 sqm.
71	Dismantling of new Plate form by M S/ chequered plate more than 2 sq.mtr
72	Fabrication of new Plate form by MSchequered plate more than 2 sq.mtr
73	Erectionof new Plate form by M S/chequered plate more than 2 sq.mtr
74	Dismantling of Crystallizer Coils
75	Fabrication of Crystallizer Coils
76	Erection of Crystallizer Coils
77	Dismantling of Old andworn out staging
78	Fabrication of Old andworn out staging
79	Erection of Old andworn out staging
80	Repairing of rubber seat of exhaust /vapor valveabove 16 “
81	Dismantling , fabricationanderection of mill juice tray by8 mm/10 mm M.S plate
82	Dismantlingof existing cane carrier chute and fabricationanderection from 8 to 10 mm M.S plate
83	Repairing of steam jacket for sulphur furnace
84	Replacement of steam jacket of evaporator bodies
85	Strengthening of vapour line above 16” diaby innerandouter side ring of angle/pipes
86	Dismantling , fabricationanderection ofsupport of angle, pipe, channel at any equipment
87	Dismantlingof Hopper centre piece by 12 mmplate
88	Fabrication of Hopper centre piece by 12 mmplate
89	Erection of Hopper centre piece by 12 mmplate
90	Dismantlingof Hopper tray
91	Fabrication of Hopper tray
92	Erectionof Hopper tray
93	Sulphur Furnace cooler Dismantling, Fab. andErection work
94	Sulphur Furnace scrubber Dismantling , Fabrication andErectionwork
95	‘B’ Vacuum crystallizer shell to be changed from10 MM M.S.plate
96	‘C, Vacuum crystallizer shell to be changed from 10 MM M.S.plate
97	Strengthening of factory columns of various size by 10 mm M.S. Plate, angle, channels etc
98	Strengthening of factory beams of any size by M.S. plate, angle, channel,I. Section etc
99	Chipping, cleaning and painting of machinery columns and beams or staging of factory machinery.
100	Painting one coat with ready mixed paint in factory building M.S. columns (25 mtr approx. height. and 15-5 mtr height approx) and M.S trusses including rubbing down old(if required at site. All the bracing and purlins are included with this work.
101	Dismantling, Fabrication and erection of any sizefactory/Building, columns beams and trusses
102	Dismantling ,Fabrication and erection of worn out Water pipes, nozzles, drain box etc.
103	Dismantling, Fabrication and erection of worn out shell ofboth wet Scrubber
104	Dismantling, Fabrication and erection of worn out internal of both wet Scrubber
105	Dismantling, Fabrication and Erection of wornout flue gas ducting size 5’ x5’of both Wet Scrubber from damper to chimney
106	Replacement of worn out portion of supports of molasses tank roof.
107	Replacement of worn out portion ofroof of molasses tank.
108	Dismantling of Boiler exit flue gas damper.
109	Dismantling, and erection of Boiler I.D., F.D. Fan impeller.
110	Replacement of weak portion of molasses tank up to a height of10 mtr by 6 mm, 8 mm,10 mm, 12 mm plate etc.
111	Dismantlingandassembling of Air heater outlet ducting.
112	Replacement of worn out Air Heater tubes.
113	Dismantling, Fabrication, Erection of worn out both boilers blow down line from boiler to drain pit.
114	Dismantling, Fabrication, Erection of worn out of 5” long bend of feed water line header.
115	Removal of hanging old lagging and fixing of new glass wool, plastered by P.O.P or hasean cloth and covered with wire netting (murga jali) without material Up to 75 mm thickness
116	Replacement of juice heater partition plate in all respects.
117	Pan No.1 top cone replacement work.
118	Reconditioning of worn outJuice heaters 02 Nos.covers & grooves with respect to its top/bottommating outside covers
119	Dismantling of 6" dia C.I. cross.
120	Erection of 6" dia C.I. cross.
121	Dismantling , fabrication, erection of 10" x 20 " vacuum filter mud tray.
122	Dismantling of worn out body shell of Pan.
123	Fabricationanderection of body shell Pan.
124	Dismantling , Fabrication, Erection of 8" x 16 " vacuum filter mud tray.
125	Juice heaterboth covers to be dismantle and erection after machining work at both shafts.
126	Dismantling of worn out bottom and Fabrication and Erection of new bottom of H-Crystallizers.
127	Dismantling, Fabrication and Erection of M.S bend 12” to 20”.
128	Dismantling, Fabrication and Erection of M.S bend 21” to 40”.
129	Dismantling of new evaporator (quad) body S.S. tubes
130	Re-tubing of new evaporator (quad)body
131	Dismantling of VC-1100 m3 S.S. tubes
132	Re-tubing of VC-1100 m3 S.S. tubes
133	Increasingthe length of hydraulic grab fingers
134	Dismantling , fabrication, erection ofkicker drum with holder assembly
135	Dismantling, Erection Commission of Pan discharge valve of Pan.
136	Modification of mill Kush Kush Conveyor
137	Fabrication, Erection of new juice Dorr filtration system.
138	Dismantling, Fabrication, Erection offlocculating chamber topandbottom plate of Dorr.
139	Crystallizer spiral ribbon strip has to dismantle and again set right fitting and worn out armsandother related work also to be done.
140	Dismantling , Fabrication, Erection ofworn out runner of cane carrier/bagasse elevator/ RBC/MBC Cane Rake Elevator.
141	Dismantling, Fabrication and Erection of Agitator of vacuum filter.
142	Dismantling, Fabrication, Erection ofworn out portion of D.S.M. screen
143	Fabrication, erection ofI.D fan cone ring with flange
144	Erectionandcommissioning ofB- messecuite C/F machine including machine structure, leveling of machine and related work to be done in all respect of M/C
145	Dismantling of oldworn out and Fabrication, Erection ofnew juice sulphitor internal drum
146	Juice ring Fabrication by 6mm plate for mill rollers
147	Hinge type cover Fabrication at copper, levelerandcutter
148	Boilers No.26” live steam line from Boiler No.2 to main steam distributer to be modified
149	Boiler feed tank replacement
150	All Bagasse chute of both boilers to be modified
151	Rack and pinion to be fitted in MBC at Bagasse loading chute.
152	Labour supply ( per day 8 hr. basis)Turner/Machinist
153	Labour supply ( per day 8 hr. basis) Fitter
154	Labour supply ( per day 8 hr. basis)Welder
155	Labour supply ( per day 8 hr. basis)Helper
156	Labour supply ( per day 8 hr. basis) Khallasi
157	Dismantling, Fab. & Erection of tail end shaft, idler shaft and driving shaft with plumber blocks & driving unit etc for B.E, RBC & MBC.
158	Dismantling, Fab. & Erection of cane carrier & Cane Rake Elevator shaft.