Tender For Modernization Of Bus Stand At Kayalpattinam Municipality, Tuticorin-Tamil Nadu

Tender For Modernization Of Bus Stand At Kayalpattinam Municipality; 1 Earth Work Excavation For Foundation And Depositing On Bank With In The Initial Lead Of 10M And A Lift Of 2M In Hard Stiff Clay, Stiff Block Cotton, Hard Red Earth, Shales, Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Etc., As Per Ss 20 A. Tndss No: 23 & 24 Vi ( S2 ) Vi, Vii 9, 10With Standard Specifications.Footings 2 Grade Beam 3 Supplying And Filling In Foundation Andbasement With Filling Sand In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted -1M3 Etc., Complete Complying With Standard Specification. ( Tnbp No . 24 & 25 ) 4 Plain Cement Concrete 1:4:8 ( One Cement, Four Sand, Eight Aggregate ) Using 40Mm Gauge Handbroken Granitestone Jelly For Foundation Including Dewatering If Foundnecessary And Laid In Layers Of Not More Than 15 Cmthick And Compacted, Etc., Complete Complying Withstandard Specfication. ( Si No 120 & 122 ) ( Tnbp No 28 ) 5 Centering For Soffits Of Rcc Slabs Of Plane Surface Like Lintels, Beams , Etc., Including Strutting 3M High Using Mild Steel Sheets Of Size 90Cm X60cm X And B.G 10 Stiffened With M.S Angles Of Size 25Mm X 25Mm X 3Mm Laid Over Silver Oak ( C.W ) Joists Of Size 10Cm X 6.5Cm ( Spaced At About 90Cm C / C ) And Supported Dy Casurina Props Of 10Cm To 13Cm Dia ( Spaced Of 75Cm C / C ) Complying With Standard Specification And Directed ( Si 154-A ) Tnbp No.- Spl Footing, Grade Beam 6 Columns 7 Ground Floor - Beams And Slabs 8 Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - The Coarse And Fine Aggregates To Be Used Should Comply With The Requiremnents Of Is Staandards. ( No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials ) Upto Basement 9 Ground Floor 10 First Floor 11 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors.Tnbp-Spl 12 Brick Work In Cm 1:5 ( One Cement & Five Sand ) Using Ii Class Ground Moulded Bricks Of Size 9X43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification Up To Basement 13 Ground Floor 14 First Floor 15 Second Floor 16 Supplying And Filling In Foundation Andbasement With Well Gravel In Layers Of Not More Than 15Cm Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. ( Tnbp Spl ) 17 Plastering With Cement Mortar 1:3, 10 Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 18 Plastering With Cement Mortar 1:5 ( One Cement And Five Sand ) , 12 Mm , Thick In All Floors Including Cost And Conveyance Of All Materials To Site Etc, Complete As Per Standard Specifications ( S.I.306 ) 19 Weathering Course With Concrete Broken Brick ( S.I.No.278 ) & ( P & D ) Data 54.Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 : 12.5 Well Beated With Wooden Beaters For Giving Required Slope And Thickness 80Mm As Directed By The Departmental Officers Etc., Complete. ( S.I.No.278 ) 20 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Cement Add Three Sand ) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete Tnbp-Spl 21 White Washing Two Coats With Freshly Burnt Shell Lime White In All Floors Including Cost Of Lime And Other Materials Brushes Scaffolding Charges Etc, Complete As Per Standard Specification 22 Painting Two Coats Of Newly Plastered Wall Surface With Ready Mixed Plastic Emulsion Paint Of First Class Quality And Of Approved Colour Over A Priming Coat Including Thorough Scrapping, Clean Removal Of Dirt, And Including Necessary Plaster Of Paris Putty, Wherever Required Etc., Complete Complying With Standard Specification. 23 Supplying And Erecting Pull And Push Type Rolling Shutter With I.S.I. Make Of Approved Size And Section Using 18 Gauge G.I.Sheet With Manually Operated Type. The Shutter Shall Be Painted With One Coat Of Red Oxide Primer And The Rate Is Inclusive Of Hood Covers, Transportation Charges Etc, Complete As Per Standard Specification. 24 Finishing The Top Of Floor With Granolithic Finish With Cc 1: 2: 4 ( One Cement, Two Sand & Four Hbg Jelly ) Using Chips Of Grade 10 Mm Andbelow For 25Mm Thickness And Rubbed Smooth Etc, Complete As Per Standard Specification 25 Paving The Floor With Design Rajasthankotta Tiles ( Colour And Shade As Directed ) Of Size 610 Mm X 610Mm X 20Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement And Three Sand ) 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement Etc, Complete As Per Standard Specification 26 Providing & Fixing Pvc Rain Water Downfall Pipe Of The Following Dia With Necessary T.W.Clamps Plugs, Shoes, Bemds, Other Clamps, Screws Nails Etc., Complete Complying With Standard Specification. The Rate Is Inclusive Of Cost Of Removable Iron Gratings Of Appropriate Size. The Size Of Teak Wood Plugs Used Is 150X25mm In Front & 200X75mm In Rear ( Wall Side ) With A Depth Of 110Mm. The Pipe Is To Be Fixed By Means Of U Clamps At The Centre Of Pipes To Be Fixed.110Mm Dia Pvc Pipe [ 4 Kg / Sqcm ] 27 Supply And Fixing Of 1000 Lit Capacity Hdpe Tank Of Isi Make With All Accssessories And The Cost Shall Inclusive Of Conveyance Charges, Fixing Charges Etc Complete As Per Standard Specification. 28 Wiring With 2 X 1.5 Sqmm ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories Inflush With Wall With 3Mm Thick Hylum Sheet Cover With Tw Switch Box And 5A F.T. Switch With Continuous Earth Wire Connection Of 14 Swg Tc Wire For Making Good Of The Concealed Portion With Suitable Colour For Pvc Concealed Light Point / Fan Point ( For Electronic Regulator ) . Sd 23 29 Wiring With 2 X 1.5 Sqmm ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories Inflush With Wall With 150 X 100 X 113 Mm Tw Switch Box With 3Mm Hylum Sheet Cover For5a 3 Pin Non Inter Locking Cs Plug With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour For Concealed Pvc Plug Point. Sd 38 30 Supply And Run Of 2 Of 1.5 Sqmm ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Cu.Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour. Sd 54 31 Supply And Fixing Of Single Box Type 440 W Flu Fitting Complete With Copper Choke And Condensor With Tw Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheathed Copper Leads From Terminals To The Fitting Sd 88 32 Earthing As Per P.W.D. Standard With An Earth Electrode Of 2Mtr. Class B Gi Pipe Of Dia Not Less Than 32Mm Complete With Necessary Masonry Work.Sd 234 33 Supply And Fixing Of 3 Phase 4 Wire 4 Way Icdb Of 32 A Per Way With 100 A Tpn Mc Switch With Suitable Trunking Box Ms Cable Entry Boxes And Internal Connection On Suitable Angle Iron Frame Work With Earth Connectionsd. 177 34 Supply And Fixing Of Horizontal Type 4 Way Triple Pole Neutral Mcb Distribution Board In Sheet Steel Enclosure With 40 A 4 Pole Mcb Isolater As Incoming And 12 Nos. 6A To 32 A Sp Mcb As Outgoing In Flush With Wall And Making Good Of The Concealed Portion With Earth Connection. The Mcbdb And McbS Should Be With The Isi Mark ( Lik Standard Make ) Sd. 179 35 Supply And Run Of 2 Of No.8 Swg Gi Wire For Guarding With Cradle With No.8 Swg Gi Wire At The Equal Interval Of 1.5M Sd.75 36 Supply And Run Of 4 X 6 Sq.Mm ( 84 / 0.3 ) 7 / 20Sqmm Pvc Unshealed Copper Cable In Suitable Pvc Rigid Pipe Concealed On Wall And Ceiling Withcontinuos Earth Wire Connection Of 14 Swg Tcwire With Painting Of Suitable Colour Sd 68 37 Designing The Semi Unitised Structural Glazing Systemwith Open Groove Joint As Per Design Intent, Preparation Of Shop Drawings For Approval, Supply, Fabricate, Erect As Per Approved Shop Drawings At Allfloor Levels And All Floor Heights Including Conductingfield Test As Per The Test Criteria Set Out In Theparticular Specification ( Metholodgy Should Be Gotapproved By The Dept. Officials. ) Design The Framingsystem ( I.E. Male & Female Frame ) To Support Visionpanels, Spandrel Panels Either With Glass Or Aluminiumcomposite Panel, Openable, Window Panels On Acontinuous Framing Supported Between Floors. Alsodesign The Split Framing Unutilized Glazing System Incase Of Strip Or Punched Windows With Vision Panelproposed With Either Insulated / Monolithic Glass, Groove Width In The System Both In Horizontal Andvertical Shall Not Be More Than 20Mm. Glazing Ofpanel Shall Be Done Only At Factory At The Controlledatmosphere 38 Providing And Fixing Acoustic Wall Panelling ( Equivalent Toarmstrong ) In Channelled Wood Works Perforated Panels Ofwidth 192Mm, Thickness Of 15Mm And Length Of 2400Mm Oras Per Required By The Departmental Engineer Made Of A Highdensity Fibre Board With Minimum 725 Kg. / M3 Densitysubstrate With A Laminated Facing As Per The Approved Shadeand Finish And A Melamine Balancing Layer On The Reverseside. The Boards Shall Have A Special Peforation Patternwhere The Visible Surface Has A Helmholtz Fluted Perforationof 3Mm Width And 21Mm Of Visible Panel Each. The Edges Ofthe Panels Shall Be Tongue-And-Grooved To Receive Specialclips For Installation. The Back Of The Perforated Panel Shallhave Sound Absorbing Non Woven Acoustical Fleese Havingnrc Of 0.52. The Panels Shall Be Mounted On Specialaluminium Splines Using Clips Provided By Armstrong Andapproved By The Engineer-In-Charge. 39 Fabricating Supplying And Fixing Of Roof With Poly Carbonate Sheet Of 6Mm Thcik With Any Colour Or Any Other Approved Design And To Be Fixed With Shelf Tapping Screws, Plastic Washer. The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 40 Paving The Floor With Design Antiskirt Ceramic Tiles ( Colour And Shade As Directed ) Of Size 305 Mm X 305Mm X 6 Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement And Three Sand ) 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement ( Tnbp- Spl ) 41 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 42 Supply And Fixing Of Cctv Camera With Specification Of Dahua- Hac-Hfw 1100Dp-B-0600 720P 1 Mega Pixel Analoghigh Definition Camera, Outdoor-25 / 30 Fps@720P, 1 / 2.9 1 Megapixel Cmos, 50M Ir, Icr, 6Mm Lens Optional, Ir Bullet Dahua - Channel - Ahd, High Video Quality On Hd 1080N, Transmit Video Signal, Audio Signal & Dual Way Data Communication Signal Over One Coaxial Cable, Hd Video Transmission Without Video Quality Loss & Delay, Extremely, Long Transmission Distance ( 300 ) , As Directed By Departmental Executive Engineer.Supply And Installing Sony Cctvcameralmr ( Electrical Sor 2021-22 Part-Q Item No.43 ) 43 29 Led Tv For Display Lmr 44 Poe Suitable For Cctv Ip Camera 24 Port 45 Rack With Accesssories - 12U Rack 46 Armoured Lan & Cctv Cable Cat 6 47 Hard Disk For Nvr ( 8Tb ) 48 Network Video Recorder For Cctv 16 Channel 49 Brick Partition Walls Using Ii Class Ground Moulded Country Bricks Of Size 8 3 / 4 X 4 1 / 4 X 2 3 / 4In C.M 1:3Using Hoop Iron Reinforcement, If Found Necessary Standard Specification Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 10 Sqm Ground Floor 50 Providing Upvc ( Un-Plasticized Polyvinyl Chloride ) Door: Providing And Fixing Casement Doors Fabricatedfrom Un-Plasticized Polyvinyl Chloride ( Upvc ) Sections. Profiles: The Profiles Should Be Three Chamber Systemwhich Provides High Insulation Properties With Outerframe 60Mm X 55Mm With An Outer Wall Thickness Of2.4Mm. The Window Unit Should Be Designed With Allcorner Joints Mitred And Fusion Welded. Windowsshould Be Steel Reinforced With 25 X 24 X 25Mm Steelreinforcement With A Thickness Of 1Mm To Havedimensional Stability. The Sash Should Be Of 60 X102mm. The Mullion Should Be Of 60 X 74Mm. Theprofiles Should Have Co-Extruded Seals.Hardware: All The Hardware Like Friction Stays, Handlesshould Be Screwed With Self Tapping Screws. Thehandles, Locks Should Be Designed So That They Cannotbe Released From Outside.Glazing: The Window System Should Be Glazed With5mm Plain Float Glass / 6Mm Bison Laminstallation: The Profiles Should Be Cut To Length Andwelded 45 Degrees. The Window Should Be Designedsuch That The Water Drainage Does Not Pass Throughthe Reinforcement Chamber. The Window Systemshould Be Fixed Directly To The Plastered Brick Wallusing Self Expanding Nylon Plug And Driving Mselectroplated Screws Into Plug. 51 Upvc Ventilatorspecification:Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Should Be Provided Inthe Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work 52 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X200mm X 6Mm Size Of Approved Make And Quality And Colour L Set In Cement Mortar 1:2 ( One Cement , Two Sand ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed Etc., Complete.As Per Standard Specification ( S.L No 261 A ) 53 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications ( Tnbp- Spl ) 54 Supplying And Fixing In Position Indian Water Closet Of Size 580 X 440Mm, White Glazed Earthen Ware Of Approved Quality With P Trap Or S Trap Confirming To Is:2556 -Part Xii With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete1:2:5 ( One Part Of Lime, Two Parts Of Sand And Five Parts Of Brick Jelly ) 100Mm Thick And Finishing The Top To Required Slope And Including Giving Necessary Connection To Cast Iron Soil Pipes / Pvc Pipes By Dismandling Brick Masonry, Reinforced Cement Concrete Roof / Floor Slab And Making Good The Disturbed Portion To Original Condition Without Leakage Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. 55 Supplying And Fixing In Position White Glazed European Water Closet Of Best Quality And Approved Make With 100Mm P Os S Trap With Double Flapped Rigit P.V.C. Seat Cover With C.P. Brass Hinges With 12.5 Litres Pvc Low Level Flushing Tank With All Internal Fittings Etc., Complete Complying With Standard Spoecifications, Labor Inclusive Of Fixing Lowlevel Flushing Tank. 56 Supplying Laying And Jointing P.V.C Pipes ( 6Kg / Sqcm ) Of Approved Quality And Best Variety Conforming To I.S.S & With I.S.I Mark, Of The Following Sizes Including Cutting , Fixing To Pvc Specials Using Adhesive But Excluding Cost Of Such Specials And Fixing To Wall With Necessary Teak - Wood Plugs, Pvc Clamps And Screws, Making Holes On The Wall Or Drilling Holes In Roof And Making Good The Dismantled Portions To Original Condition With Necessary Brick Work And Plastering Wherever Necessary With Necessaryscaffolding Charges.25Mm Dia, Pvc Pipe 57 20Mm Dia.Pvc Pipe 58 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve ( Heavy Type ) With I.S.I.Mark Of The Following Sizes Including Cost Of Shellac , Thread Etc, .Including Labour For Cutting And Threading Of G.I.Pipes Etc., Complete Complying With Standard Specifications For Both Internal And External Water Supply Arrangements 25Mm Dia G.M.Gate Valve 59 20Mm Dia G.M.Gate Valve 60 Suppling And Fixing In Position15mm.Diameter Brass Screw Down Tap ( Heavy Duty ) Of Approved Make Conforming To I.S.Specifications And Quality Including Cost Of Shellac , Thread Etc.Complying With Standard Specifications And Including Cutting And Threading Wherever Necessary. 61 Supplying And Fixing In Position P.V.C. Specials Such As Plain Bend, Door Bend, Plain Tee, Door Tee, Offsets, Y-Junction, Plain Or With Door Of Various Sizes Best Quality Confirming To I.S.S And Providing Leakproof Joints Including Fixing To Wall And Giving Connection To The P.V.C, Soil Stacks, Dismadling The Brick Masonry Or R.C.C.Floor Or Roof Slab And Redoing The Dismandled Portion To Original Condition Etc., Complete Complying With Standard Specifications110mm Dia Pvc Tee 62 110Mm Dia Pvc Door Elbow 63 Supply And Fixing Of Wt Bulk Head Fitting With Guard Suitable For 11W Cfl Lamp With Cfl Sd 83 64 Supply And Fixing Of 300Mm ( 12 ) Sweep Ac Exhaust Fan Complete With Necessary Wall Opening And Making Good Of The Wall. Sd114 65 Roofing With Galvanised Coruugated Iron Sheet Of 0.8Mm Thickness - 10 M2 66 Supplying And Erecting In Position Of 250Liters Capacity Industrial Model Reverse Osmosis Water-Cum-Purifier To Deliver Potable Water With World Health Organisation ( Who ) Standards With Following Accessories. ( A ) Ms Skid - 1 No. ( B ) Media 11054 No. Vessel With 20 Nb Multiport Valve ( With Media Pubble And Fine Sand And Activated Carbon Filling ) Set ( C ) Feed Pump 0.50 Hp – 1 No. ( D ) Vertical Pump 2-9, 2.00 Hp / Single Phase – 1 No. ( E ) Membrane 40 X 40 Filmtech ( Or ) Equilaents / Osmonic ( Usa ) - 1 No. And Membrane Pressure Vessel 40 X 40 -1 No. & Pressure Gauge - 2 Nos. ( F ) Flow Meter - 1 No. 20” Filter With Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary Cpvc Pipes And Fittings. The System Shall Be Provide With Two Panel Control System With Necessary Stainless Valves And Fittings And Float Control Etc. The Rate Should Be Inclusive Of All Civil Works, Wherever Necessary To Install The System In Position And Intact. 67 Supplying And Erectingof 12 Mtrs.Mini Mast Tower Polygonal Shapes. Suitable For 12 Luminaries For Wind Speed Up To 180 Km / Hr. As Per Is -875 Parts -3 Material Cons.: Bsen 10025 # Mechanical Components Including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries And C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.Etc. ( Each Set ) # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts And Bolts. # Cable With Termination & Distribution Box. # Foundation A0.45Essories. # Winch Assembly # Power Tool. Mast Bottom Dia:415 Mm. Top : 150 Mm, Thk: 4, 3, 3 Mm. Motor-1.Feeder Pillar Box Comprising 100 Ams Fuse Unit 24 Hours Timer 1-Nos And Contactor 1-Nos Outgoing Mcb Toggle Switch And Neutral Link With Internal Wiring Made Of Ms Sheet And Vermin Proof.Erection And Commissioning Of 20 Mtr High Mast On The Above Said Concrete Foundation Using Suitable Equipments.Fixing Of Flood Light Luminaries In The Lantern Carriage Including Internal Wiring & Using Flexible Copper Cable Complete. Halonix Led Flood Light 150W ( Cw ) 12 Nos ( Pwd Sor P.No : 161 ) 68 Plain Cement Concrete 1:2:4 ( One Cement, Two Fine Aggregates And Four Coarse Aggregates ) Using 20Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Chargesetc., Complete As Per Standard Specification

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	31-Oct-2023	Date extend on 8.11.2023	Date	08-11-2023
2	08-Nov-2023	Date extend on 15.11.2023	Date	15-11-2023
3	15-Nov-2023	Date extend on 22.11.2023	Date	22-11-2023
4	22-Nov-2023	Date extend on 04.12.2023	Date	04-12-2023
5	04-Dec-2023	Date extend on 15.12.2023	Date	15-12-2023

Refer document

INR 550000.0 /-

Refer document

Name of Work: Modernization of bus stand at Kayalpattinam Municipality

Sl. No.	Item Description
1	Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications.Footings
2	Grade Beam
3	Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.(TNBP No . 24 & 25)
4	Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge handbroken granitestone jelly for foundation including dewatering if foundnecessary and laid in layers of not more than 15 cmthick and compacted,etc., complete complying withstandard specfication.(SI No 120 & 122) (TNBP No 28)
5	Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed (SI 154-A) TNBP No.- spl Footing,Grade Beam
6	Columns
7	Ground floor - Beams and Slabs
8	Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) Upto Basement
9	Ground floor
10	First floor
11	Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors.TNBP-spl
12	Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification Up to Basement
13	Ground floor
14	First floor
15	Second floor
16	Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.(TNBP Spl)
17	Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
18	Plastering with cement mortar 1:5 (One cement and five sand) ,12 mm ,thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications (S.I.306)
19	Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being 32 : 12.5 well beated with wooden beaters for giving required slope and thickness 80mm as directed by the departmental officers etc., complete.(S.I.No.278)
20	Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete TNBP-Spl
21	White washing two coats with freshly burnt shell lime white in all floors including cost of lime and other materials brushes scaffolding charges etc, complete as per standard specification
22	Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
23	Supplying and erecting pull and push type rolling shutter with I.S.I. make of approved size and section using 18 gauge G.I.sheet with manually operated type. The Shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification.
24	Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm andbelow for 25mm thickness and rubbed smooth etc, complete as per standard specification
25	Paving the floor with design Rajasthankotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification
26	Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]
27	Supply and fixing of 1000 lit capacity HDPE tank of ISI make with all accssessories and the cost shall inclusive of conveyance charges, fixing charges etc complete as per standard specification.
28	Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23
29	Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38
30	Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. SD 54
31	Supply and fixing of single box type 4"40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 88
32	Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class "B" GI pipe of dia not less than 32mm complete with necessary masonry work.SD 234
33	Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 A per way with 100 A TPN MC switch with suitable trunking box Ms cable entry boxes and internal connection on suitable angle iron frame work with earth connectionSD. 177
34	Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB"s should be with the ISI mark (lik standard make) SD. 179
35	Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m SD.75
36	Supply and run of 4 X 6 sq.mm (84/0.3) 7/20sqmm PVC unshealed copper cable in suitable PVC rigid pipe concealed on wall and ceiling withcontinuos earth wire connection of 14 SWG TCwire with painting of suitable colour SD 68
37	Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere
38	Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a "Helmholtz" fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be "tongue-and-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge.
39	Fabricating supplying and fixing of roof with Poly carbonate sheet of 6mm thcik with any colour or any other approved design and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
40	Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement (TNBP- Spl)
41	Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
42	Supply and Fixing of CCTV Camera with Specification of Dahua- HAC-HFW 1100DP-B-0600 720P 1 Mega Pixel AnalogHigh Definition camera, outdoor-25/30 fps@720P,1/2.9" 1 Megapixel CMOS, 50m IR,ICR, 6mm Lens optional, IR Bullet Dahua - Channel - AHD, High Video Quality on HD 1080N, Transmit Video Signal, audio signal & Dual way data communication signal over one coaxial cable, HD Video transmission without Video quality loss & delay, extremely, long transmission distance (300), as directed by Departmental Executive Engineer.Supply and Installing sony CCTVcameraLMR (Electrical SOR 2021-22 Part-Q item no.43)
43	29" Led TV for display LMR
44	Poe suitable for CCTV IP camera 24 port
45	Rack With Accesssories - 12U Rack
46	Armoured LAN & CCTV Cable Cat 6
47	Hard Disk For NVR(8TB)
48	Network Video Recorder for CCTV 16 Channel
49	Brick Partition Walls using II class ground moulded country bricks of size 8 3/4" x 4 1/4" X 2 3/4in C.M 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm Ground floor
50	Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.
51	UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
52	Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed etc., complete.as per standard specification(S.L No 261 a)
53	Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications (TNBP- Spl)
54	Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with "P" trap or "S" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.
55	Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm "P" os "S"" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank.
56	Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges.25MM dia,PVC pipe
57	20mm dia.PVC pipe
58	Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements 25mm dia G.M.Gate Valve
59	20mm dia G.M.Gate Valve
60	Suppling and fixing in position15mm.diameter brass screw down tap(heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac , thread etc.complying with standard specifications and including cutting and threading wherever necessary.
61	Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C.floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications110mm dia PVC Tee
62	110mm dia PVC Door Elbow
63	Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL SD 83
64	Supply and fixing of 300mm (12") sweep AC exhaust fan complete with necessary wall opening and making good of the wall. SD114
65	Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2
66	Supplying and erecting in position of 250liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.
67	Supplying and erectingof 12 Mtrs.Mini Mast Tower Polygonal Shapes. Suitable for 12 luminaries for Wind Speed up to 180 Km/hr. As per IS -875 Parts -3 Material Cons.: BSEN 10025 # Mechanical Components including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries and C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.etc. ( Each Set ) # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts and Bolts. # Cable with termination & distribution box. # Foundation A0.45essories. # Winch Assembly # Power tool. Mast bottom Dia:415 mm. Top : 150 mm, Thk: 4,3,3 mm. Motor-1.Feeder pillar box comprising 100 ams fuse unit 24 hours timer 1-nos and contactor 1-nos outgoing MCB toggle switch and neutral link with internal wiring made of MS sheet and vermin proof.Erection and commissioning of 20 Mtr high mast on the above said concrete foundation using suitable equipments.Fixing of flood light luminaries in the lantern carriage including internal wiring & using flexible copper cable complete. Halonix LED Flood light 150W ( CW ) 12 nos (PWD SOR P.NO : 161)
68	Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification