Tender For Augmentation Of Water Supply At Uri, Baramulla-Jammu And Kashmir

Tender For Augmentation Of Water Supply At Uri; 1 Note: ( I ) Please Refer Schedule A Notes Given In Tender Documents. ( Ii ) Item From Srl No. 3 To 6 Of This Document Shall Be Part-Xii ( Miscellaneous Items Of Works ) Of Boq. ( Iii ) Unless Otherwise Specified, Earth Work And Excavation Shall Be Measured And Paid Separately. ( Iv ) This Schedule A Part-Xii ( Miscellaneous Items Of Works ) Is Not Estimatedby Mes And The Estimated Rate Indicated As Rs. 0.00 Under Col.5 Signifies This Fact Only. 2 Lumpsum / Other Pre-Priced Provisional Schedules Of Works 3 Lump Sum Price Worked Out By The Contractor For Building Works As Listed In Schedule A Part-I Brought Forward From Serial Page No. 23 4 Lump Sum Price Worked Out By The Contractor For Internal Electrification Works As Listed In Schedule A Part-Ii Brought Forward From Serial Page No. 24 5 Lump Sum Price Worked Out By The Contractor For Internal Water Supply Works As Listed In Schedule A Part-Iii Brought Forward From Serial Page No. 26 6 Lump Sum Price Worked Out By The Contractor For Area Drainage Works As Listed In Schedule A Part-Iv Brought Forward From Serial Page No. 27 7 Lump Sum Price Worked Out By The Contractor For Sewage Disposal Works As Listed In Schedule A Part-V Brought Forward From Serial Page No. 29 8 Lump Sum Price Worked Out By The Contractor For Road / Path / Culvert Works As Listed In Schedule A Part-Vi Brought Forward From Serial Page No. 31 9 Lump Sum Price Worked Out By The Contractor For External Electrification Works Listed In Schedule A Part-Vii Brought Forward From Serial Page No. 32 10 Lump Sum Price Worked Out By The Contractor For Compound Wall / Fencing / Gate Works As Listed In Schedule A Part-Viii Brought Forward From Serial Page No. 34 11 Lump Sum Price Worked Out By The Contractor For Site Clearance & Earth Worksas Listed In Schedule A Part-Ix Brought Forward From Serial Page No. 35 12 Lump Sum Price Worked Out By The Contractor For External Water Supply Works As Listed In Schedule A Part-X Brought Forward From Serial Page No. 37 13 Lump Sum Price Worked Out By The Contractor For Dg Set Works As Listed In Schedule A Part-Xi Brought Forward From Serial Page No. 38 14 Dg Set Works 15 Supply Installation Testing & Commissioning Of Eco Friendly Diesel Engine Driven Generating Set Outdoor Type Of Capacity 25 Kva With 42 Bhp Engine Capacity ( Primeover ) After Derating, Cpcb-Iinearest Higher Side 400 / 440 Volts, Ac 3 Phase, 50 Hz , 4 Wire, 0.8 Pf Directly Coupled Alternator And Engine Water Cooled With Amf Panel Common Steel Base Fixed On Cement Concrete In Foundation As Per Oem Recommendation Dg Set Of 25 Kva Platform With Inbuilt Amf Panel With 2 Nos. Suitable Size Of Contactors As 01 No For Main Supply And 01 No. For Dg Supply As Per Manufacturer Recommendation And Other Accessories Comprising Of Following. Note :- 1. The Dg Set Should Be Designed As Per Latest Emission Norms, Considering The Derating Factor Of Altitude 5204 Ft Above Sea Level ( Uri ) Extreme Cold Climate In Winters.The Ambient Temp Varies From ( - ) 05 Degree Celsius ( In Winter ) To ( + ) 35 Degree Celsius ( In Summer ) . 2. After Considering Of Derating Factor By Manufactuturer On Above Location In Note 1, The Net Output Is Reqdof 25 Kva Dg Set.3.The Plinth Should Be As Per Manufacturer Recommendation And The Rate Of Plinth Is Deemed To Be Included In Quoted Rate. ( A ) Engine- Eco Friendly For Emission And Noise ( Pcb Norms Compliance ) 4 Stroke Diesel Engine Confirming To Bs Std Developing, 1500 Rpm Water Cooled Complete With A Provision For 10% Overload For One Hour On 25 Kva. 16 I ) Fly Wheel With Starter Ring For Generating Set.Ii ) Dry Type Air Filter.Iii ) Lub Oil Cooler Assembly With Accessories.Iv ) Exhaust Air Manifold.V ) Exhaust Silencer.Vi ) Expansion Bellow. Vii ) Exhaust Gas Turbocharger.Viii ) Fuel Filter ( Pre Micro ) . Ix ) Lubrication Oil Filter.X ) 12V Electrical Starting System With Starting Motor & Battery Charging Alternator With Self-Starter And Other Auto Electric Accessories As Recommended By Manufacturer. Xi ) Centrifugal By-Pass Filter.Xii ) Front & Rear Engine Mounting Supports.Xiii ) Engine Control Panel Consisting Of Off / On / Start Keys Lub Oil Pressure Gauge, Ammeter, Electronic Hour Meter, Speedometer. Xiv ) Safety Against Low Lub Oil Pressure.Xv ) Engine Operation / Maintenance, Spare Parts Manual.Xvi ) Engine Test Certificate.Xvii ) Cold Starting Kitxvii ) Mechanical Governor ( B ) Alternator- Salient Pole Brushless Copper Wound Type Suitable For Direct Couple To Engine Self-Excited, Self-Regulated With Fast Response Thermistor Type Electronic Automatic Voltage Withhold Output Voltage With In Desired Limit ( +1% ) Dynamicallybalanced 400 / 415 Volts Ac 3 Phase 50 Hz, 4 Wire 0.8 Pf Lagging 25 Kva 1500 Rpm Star Connected ( 4 Wire ) Screen Protected Drip Proof Enclosures With Radial Fan Mounted On Rotor With Insulation Class - H Suitable For Ambient Temperature Varing From ( - ) 05 Degree Celsius ( In Winter ) To ( + ) 35 Degree Celsius ( In Summer ) ( Uri ) With Following Accessories. 17 I ) One Ms Frame Suitable For Mounting Of Engine & Alternator.Ii ) Fuel Tank Of Suitable Capacity As Per Manufacturer Recommendation Complete With Fuel Gauge Inlet / Outlet Connections Drain Valve With Plug Etc. Iii ) Battery Of Suitable Capacity As Per Manufacturer Recommendation With Copper Leads And Terminalsof Suitable Sizeiv ) One Set Of Avm Pads Fitted On Base Frame. ( C ) Acoustic Enclosure- Supply & Install Of Acoustic Enclosure Suitable For 25 Kva Dg Set The Degree Of Protection Ip-42 Conforming To Is - 2147 As Under:I ) Fabricated Out Of Crca Sheet Of Suitable Thickness As Per Manufacture Design. Polyster Based Powder Coated Internally And Externally With Lockable Type Door Handle. All Nuts And Handles Shall Be Zinc Coated.Ii ) The Doors Are Gasketed With Epdm Gaskets.Iii ) Sound Proofing With High Quality Rock Wool / Mineral Wool Confirming To Is 8183 Of 50Mm Thickness And Density At 96 Kg / M3 Covered With Fiber Glass Cloth And Perforated Powder Coats Sheet Specially Designed Alienators ( Sound Controller ) At Air Entry And Exit Of The Container Noise Level Shall Be Not Exceed 75 Db At 1 Meter Distance As Per Cpcb Norms.Iv ) Adequate Ventilation To Meet Air Requirement For Combustion And Heat Removal With Provn Of A Blower.V ) Emergency Stop Push Button Outside The Container.Vi ) Provn Of Light Inside The Canopy 20W Led Fitting With Wiring And Control Switch. 18 Supply Installation Testing & Commissioning Of Eco Friendly Diesel Engine Driven Generating Set Outdoor Type Of Capacity 20 Kva With Not Less Than 33 Bhp Engine Capacity ( Primeover ) After Derating, Cpcb-Iinearest Higher Side 400 / 440 Volts, Ac 3 Phase, 50 Hz , 4 Wire, 0.8 Pf Directly Coupled Alternator And Engine Water Cooled With Amf Panel Common Steel Base Fixed On Cement Concrete In Foundation As Per Oem Recommendation Dg Set Of 20 Kva With Inbuilt Amf Panel As Per Manufacturer Recommendation And Other Accessories Comprising Of Following. Note :- 1. The Dg Set Should Be Designed As Per Latest Emission Norms, Considering The De-Rating Factor Of Altitude 5204 Ft Above Sea Level ( Uri ) Extreme Cold Climate In Winters.The Ambient Temp Varies From ( - ) 05 Degree Celsius ( In Winter ) To ( + ) 35 Degree Celsius ( In Summer ) . 2. After Considering Of De-Rating Factor By Manufacturer On Above Location As Ser No 1 The Net Output Is Requiredof 20 Kva Dg Set.3.The Plinth Should Be As Per Manufacturer Recommendation And The Rate Of Plinth Is Deemed To Be Included In Quoted Rate. ( A ) Engine- Eco Friendly For Emission And Noise ( Pcb Norm Compliance ) 4 Stroke Diesel Engine Confirming To Bs Std Developing 1500 Rpm Water Cooled Complete With A Provision For 10% Overload For One Hour On 20 Kva. 19 I ) Fly Wheel With Starter Ring For Generating Set.Ii ) Dry Type Air Filter.Iii ) Lub Oil Cooler Assembly With Accessories.Iv ) Exhaust Air Manifold.V ) Exhaust Silencer.Vi ) Expansion Bellow.Vii ) Exhaust Gas Turbocharger.Viii ) Fuel Filter ( Pre Micro ) .Ix ) Lubrication Oil Filter.X ) 12V Electrical Starting System With Starting Motor & Battery Charging Alternator With Self Starter And Other Auto Electric Accessories As Recommended By Manufacturer.Xi ) Centrifugal By-Pass Filter.Xii ) Front & Rear Engine Mounting Supports.Xiii ) Engine Control Panel Consisting Of Off / On / Start Keys Lub Oil Pressure Gauge, Ammeter, Electronic Hour Meter, Speedometer.Xiv ) Safety Against Low Lub Oil Pressure.Xv ) Engine Operation / Maintenance, Spare Parts Manual.Xvi ) Engine Test Certificate.Xvii ) Cold Starting Kitxvii ) Mechanical Governor ( B ) Alternator- Salient Pole Brushless Copper Wound Type Suitable For Direct Couple To Engine Self-Excited, Self-Regulated With Fast Response Thermistor Type Electronic Automatic Voltage Withhold Out Put Voltage With In Desired Limit ( +1% ) Dynamicallybalanced 400 / 415 Volts Ac 3 Phase 50 Hz, 4 Wire 0.8 Pf Lagging 20 Kva 1500 Rpm Star Connected ( 4 Wire ) Screen Protected Drip Proof Enclosures With Radial Fan Mounted On Rotor With Insulation Class- H Suitable For Ambient Temperature Varies From ( - ) 05 Degree Celsius In Winter To ( + ) 35 Degree Celsius In Summer ( Uri ) With Following Accessories: 20 I ) One Ms Frame Suitable For Mounting Of Engine & Alternator.Ii ) Fuel Tank Of Suitable Capacity As Per Manufacturer Recommendation Complete With Fuel Gauge Inlet / Outlet Connections Drain Valve With Plug Etc.Iii ) Battery Of Suitable Capacity As Per Manufacturer Recommendation With Copper Leads And Terminalsof Suitable Sizeiv ) One Set Of Avm Pads Fitted On Base Frame. ( C ) Acoustic Enclosure- Supply & Install Of Acoustic Enclosure Suitable For 20 Kva Dg Set The Degree Of Protection Ip-42 Conforming To Is - 2147 As Under: -I ) Fabricated Out Of Crca Sheet Of Suitable Thickness As Per Manufacture Design. Polyster Based Powder Coated Internally And Externally With Lockable Type Door Handle. All Nuts And Handles Shall Be Zinc Coated.Ii ) The Doors Are Gasketed With Epdm Gaskets.Iii ) Sound Proofing With High Quality Rock Wool / Mineral Wool Confirming To Is 8183 Of 50Mm Thickness And Density At 96 Kg / M3 Covered With Fiber Glass Cloth And Perforated Powder Coats Sheet Specially Designed Alienators ( Sound Controller ) At Air Entry And Exit Of The Container Noise Level Shall Be Not Exceed 75 Db At 1 Meter Distance As Per Cpcb Norms. Iv ) Adequate Ventilation To Meet Air Requirement For Combustion And Heat Removal With Provn Of A Blower.V ) Emergency Stop Push Button Out Side The Container.Vi ) Provn Of Light Inside The Canopy 20W Led Fitting With Wiring And Control Switch 21 External Water Supply Works 22 Material And Labour For Trial Drilling Bore Holein Alluvial Strata For Construction Of Deep Borewell Of 200Mm Dia With Any Method As Reverse Rotary / Forward Rotary / Odex / Dth Rig Drilling Machine Complete With Driling Bits, Dril Shaft And All Other Accessories, Complete With Transportation, Errection Of Camp At Site And Removal Of All Tools And Plants On Completion Of Borewell Work For The Depth Upto 60 Metre From Ground Level As Complete All As Specified And Directed. ( Location : 2 Bore Well For Uri Garrison ) 23 All As Per Item No. 4.01 Here-In-Before But Depth Exceeding 60 Metre And Upto 120 Metre Below Ground Level. 24 All As Per Item No. 4.01 Here-In-Before But Depth Exceeding 120 Metre And Upto 180 Metre Below Ground Level. 25 All As Per Item No. 4.01 Here-In-Before But Depth Exceeding 180 Metre And Upto 300 Metre Below Ground Level. 26 Notes For Item No 4.01 To 4.04:- 1. The Contractor Shall Execute The Borewell Work First. Only After Successful Development Of Borewell, Execution Of Rest Of The Work As Per Boq Shall Be Undertaken Complete All As Directed By Engineer-In-Charge.2. ( A ) In Case Of Sufficient Yield And Potable Water Quality : ( I ) 1St Trial Borewill Be Developed As Per The Boq. ( B ) In Case Of Insufficient Yield Or Non-Potable Water Quality ( I ) 1St Trial Bore Will Be Abandoned. ( Ii ) 2Nd Trial Borewill Be Carried Out By The Contractor In The Locations As Earmarked By Engr-In-Charge.3.Contractor Will Carry Out The 2Nd Trial Bore In Condition Of 2 ( B ) Above: ( A ) In Case Of Sufficient Yield And Potable Water Quality ( I ) 2Nd Trial Borewill Be Developed As Per The Boq. ( B ) In Case Of Insufficient Yield Or Non-Potable Water Quality ( I ) 2Nd Trial Bore Will Be Developed As Per The Boq & Water Will Be Used For Other Purpose. ( C ) Incase Of No Yield ( I ) 2Nd Trial Borewill Be Abandoned ( Ii ) No Further Trial Bore Will Be Carried Out. ( Iii ) Contractor Will Be Paid For Item No 4.01 To 4.04 Of Boq & The Contract Will Be Foreclosed.4.The Cost Of Necessary Fuel, Lubricant And Chemical Extra Required For Construction Of Work Shall Be Deemed To Be Included In The Unit Quoted Rate By The Tenderer And Nothing Extra Shall Be Paid For These Items. 27 Material And Labour For Development Of Bore With Reaming Upto 550Mm For Borewell Casing Pipe Of 250Mm Dia, For Depth Upto 60Metre From Ground Level Complete All As Specified And Directed. 28 Material And Labour For Development Of Bore With Reaming Upto 550Mm For Borewell Casing Pipe Of 200Mm Dia, For Depth From 60Metre To 200 Metre From Ground Level Complete All As Specified And Directed. 29 Material And Labour For Development Of Bore With Reaming Upto 550Mm For Borewell Casing Pipe Of 200Mm Dia, For Depth From 200Metre To 300 Metre From Ground Level Complete All As Specified And Directed. 30 Supplying, Assembling, Lowering And Fixing In Position 250Mm Nominal Bore Ms Erw Isi Marked Casing Blank Pipe Having Wall Thickness 8Mm As Per Is -4270 ( 2001 ) And Jointing With Electric Arc Welding, Random Length Of Pipe 3 To 6 Metre, Including Necessary Fittings, Ie. Coupling, Jointing And Painting With Two Coats Of Bituminous Paint Of External Surfaces Of Pipe Upto Depth Of 60 Metre Below Ground Level Complete All As Specified And Directed. 31 Supplying, Assembling, Lowering And Fixing In Position 200Mm Nominal Bore Ms Erw Isi Marked Casing Blank Pipe Having Wall Thickness 8Mm As Per Is - 8110 And Jointing With Electric Arc Welding, Random Length Of Pipe 3 To 6 Metre, Including Necessary Fittings, Ie. Coupling, Jointing And Painting With Two Coats Of Bituminous Paint Of External Surfaces Of Pipe Upto Depth From 60 Metreto 240 Metre Depth Below Ground Level Complete All As Specified And Directed. 32 Supplying, Assembling, Lowering And Fixing In Position 200Mm Nominal Bore Ms Erw Isi Marked Casing Fine Cut Pipe ( Stainer ) Having Wall Thickness 8Mm As Per Is - 8110 With And Including Slot Of Suitable Size And Numbers And Jointing With Electric Arc Welding, Random Length Of Pipe 3 To 6 Metre, Including Necessary Fittings, Ie. Coupling, Jointing And Painting With Two Coats Of Bituminous Paint Of External Surfaces Of Pipe Upto Depth From 240 Metreto 300 Metre Depth Below Ground Level Complete All As Specified And Directed. 33 Material And Labour For Ms Sleeves 10Mm Thick Suitable For 200Mm Ms Pipe, Arc Welding At Joints, Width 200Mm Complete All As Specified And Directed. 34 Material And Labour For Ms Sleeves 10Mm Thick Suitable For 250Mm Ms Pipe, Arc Welding At Joints, Width 200Mm Complete All As Specified And Directed. 35 Material And Labour For Electro Logging Of Bore Well For Designing And Lowering Of Pipe Assembly On Logging Report / Graph Complete All As Specified And Directed. 36 Material And Labour For Reducing Socket Made Out Of Ms Plate 12Mm Thick, Size 250 / 200Mm Bore Ms Pipe Incld Jointing With Electric Arc Welding Complete All As Specified And Directed. 37 Material And Labour For Bail Plug Made Out Of Ms Housing Pipe 200Mm Dia, Wall Thickness 8Mm, One And Half Metre Long Blocked With 10Mm Thick Ms Plate With Bottom Hook Incld Jointing With Electric Arc Weldingcomplete All As Specified And Directed. 38 Material And Labour For Centre Guide Made Of Ms Flat Iron ( 40X6mm ) Incld Jointing With Electric Arc Welding With Casing Complete All As Specified And Directed. 39 Supply And Filling Of Cleaned And Washed, Pea Gravel Of Size 3Mm To 6Mm Packing Around The Pipe Bottom To Ground Level Complete All As Specified And Directed. 40 Material And Labour For Ms Clamp Suitable For 250Mm Dia Housing Pipe Made For 150 X 20Mm Thick Plate Including Bolts / Nuts And Washers Of Required Size Complete All As Specified And Directed. 41 Material And Labour For Well Cap Made Out Of 6Mm Thick Ms Plate Suitable For 250Mm Housing Pipe To Provide Cover At Top Of Borewell Complete With Locking Arrangement Using 25Mm Dia, 400Mm Long Ms Bolt Slotted Through The Cap And Casing Pipe With And Including 1 No Lock Complete All As Specified And Directed. 42 Material And Labour For Development Of Bore With Air Compressor Not Less Than 400 Psi Compressor Over Pumping Unit Till Sand Free Water Obtained And Testing The Yeild For Duration As Under Complete All As Specified And Directed For First 24 Hours By Using Air Compressor Complete All As Specified And Directed.Notes: - ( A ) Contractor Has To Provide Own Dg Set / Prime Mover To Run Compressor And Over Pumping Set. ( B ) All Type Of T&P And Transportation Required For Development Of Bore Shall Be Arrange By The Contractor And Cost Of These Items Shall Be Deemed To Be Included In The Unit Quoted Rate. 43 All As Per Item No. 4.20 Here-In-Before But Subsequent48 Hours After First 24 Hours With Over Pumping 44 Material And Labour For Foundation For Holding Borewell Assembly Of Size 1.0M X 1.0M X 0.5M At Ground Level Made Of Pcc ( 1:2:4 ) Type B-2 Using 40Mm Graded Crushed Stone Aggregate With Gi Pipe 80Mm Bore Medium Grade At Three Places, Embedded Through Out The Block 1.70Metre Length For Feeding Gravels And Gi Plug And Socket Fixed On Top Complete All As Specified And Directed. 45 Material And Labour For Strata Sample Box With Glass Cover 3Mm Thick And Having Minimum Internal Dimension 1000Mm X 1000Mm X 100Mm Made Out Of Shisham 1St Class Hard Wood Planks, 20Mm Thick With Hinges Staple Including Painting Two Coats Of Synthetic Enamel Paint Over A Coat Of Primer Complete With Soil Sample Placed In Position Of 200Mm Wide Made With Wood Planks 20Mm Thick Complete All As Specified And Directed.Note: - The Number Of Poriton May Vary With Type Of Soil Starata Met And Over All Length Of The Bore And Can Be Increased Beyond 1000Mm X 1000Mm . 46 Material And Labour For Yield Test For The Borewell By Continously For 16 Hours, In The Presence Of Iem, To Determine Using V Notch Constructed At Site Complete All As Specified And Directed. Note: - Chemical / Bacteriological Analysis And Potability Test Of Water Obtained From Borewell Shall Be Done From Approved Lab And Submitting The Report In Triplicate Shall Be Deemed To Be Included In The Unit Quoted Rate. 47 Material And Labour For Tripod Made Out Of Heavy Duty Jointless Gi Pipe 80Mm Bore Suitable For 2 Ton Capacity With Nut And Bolt And Hook For Suitable Sizecomplete All As Specified And Directed. 48 Supply And Fixing Chain Pulley Block 2 Ton Capacity With Heavy Duty Chain Suitable For Working 3Metre Above Ground Level, Chain 10Metre Long Complete All As Specified And Directed. 49 Supply, Installation, Testing And Commissioning Of Submersible Pump, Electric Driven 415 V, Tp Suitable For 250 Mm Dia Bore Well ( Casing Pipe Size 250 Mm ) Supply And Install Complete Upto17.5 Hpcalculated, Discharge 333 Lpm, Head Not Less Than 106 Mtrfor Borewell No-1 Including Suitable Size Of Flexible Steel Rope With Clamp For Holding Submersible Motor Pump Complete All As Specified And Directed . 50 Supply, Installation, Testing And Commissioning Of Submersible Pump, Electric Driven 415 V, Tp Suitable For 250 Mm Dia Bore Well ( Casing Pipe Size 250 Mm ) Supply And Install Complete Upto 12.5 Hpcalculated, Discharge 333 Lpm, Head Not Less Than 71 Mtr For Borewell No-2 Including Suitable Size Of Flexible Steel Rope With Clamp For Holding Submersible Motor Pump Complete All As Specified And Directed . 51 Supply, Laying And Testing Copper Cable Of Size 25Qmm, 3 Core For Submersible Pump Complete All As Specified And Directed. 52 Supply, Installation, Testing And Commissioning Of Chemical Dosing System Suitable To Inject Solution Upto 25Lph Comprising Dosing Pump Coupled With Single Phase Electric Motor Of Capacity 0.5Hp, 1440 Rpm Assembly Including Dol Starter Suitable Capacity With Agitator Dosing And Agitator In Single Motor, Agitator With Ss Sweep Blade Duly Frp Coated, Frp Double Tank 150 Litre Capacity, Complete Unit Mounted On Heavy Duty Ms Fabricated Frame Duly Painted With Anti Corrosive Paint Including Packing, Electrical & Pumping Works Etc. Complete All As Specified And Directed.Note: - The Cost Of Electrical Connection Like Point Wiring And Socket Point Requreid For Smooth Functioning Of Dosing Plant And T&P Shall Be Included In The Unit Quoted Rate. 53 Supply And Fixing Upvc Pipe Of 20Mm Dia Confirming To Is 4985 / 2000 Complete Including Necessary Clamps And Fittings, Jointing Material Etc. Complete All As Specified And Directed. 54 Supply And Lowereing In Borewell, Ms Erw Is-4270 ( 2001 ) Column Pipe Of Size 100Mm Bore In 3Metre Length, Both Ends Flanged With 10Mm Thick Ms Flange Including Cutting Holes ( 04 Nos ) Of Size 10Mm Dia For Passing The Submersible Cable, With And Including Suitable Size Of Covering Nuts, Bolts, Washers And Rubber Gasket Complete All As Specified And Directed. Note: - All Arrangements And T&P Requried For Lowering The Column Pipe In The Bore Shall Be Made By The Contractor Under Their Own Arrangement At No Extra Cost. 55 M&L For Cast Iron Air Valves With Two Air Outlets, Conforming To Is-14845 Of Size 100 Mm Dia Bore And Fixing Up In Cast Iron Water Supply Mains Complete All As Specified And Directed. 56 Material And Labour For Construction Of Brick Valve Pit Of Size ( 0.9Mx0.9Mx1.5M ) Internal Dimensions Including All Excavation And Earth Work In Any Type Of Soil, Returning Filling In And Disposal Of Soil To A Distance Of Not Exceeding 50M And Depositing As Directed, Pcc As In Foundation Of The Mix 1:4:8 Type D-2 Using 40Mm Graded Crushed Stone Aggregate, Pcc As In Coping In 1:2:4 Type B-2 Using 12.50Mm Graded Crushed Stone Aggregate Incl Form Work, Brick Masonary In Cement Mortar 1:4 Using Sub Class B Bricks, Rendering 12Mm Thick In Cement Mortar 1:4 Internally Finihsed Even And Fair And Pointing Flush Externally As The Work Proceed In The Same Mortar, Valve Pit Cover Withms Sheet Cover 3.15Mm Thick Welded To Mild Steel Angle Iron 50X50x6mm Frame With Handle And Locking Arrangement, Painting All The Exposed Surfaces Of Steel With Two Coats Of Synthetic Enamel Paint Over A Coat Of Primer And The Portion Embedded In Concrete With Two Coats Of Black Bituminous Paint Complete All As Specified And Directed. 57 Supply, Laying And Jointing Pipe Ductile Iron, Spigot And Socketed End Including Fittings Class K-7, 100Mm Dia Suitable For Tyton Joint Complete All As Specified And Directed. 58 Material And Labour For Tyton Joint Suitable For 100Mm Bore Di Pipe Including Jointing Material Complete All As Specified And Directed. 59 Supply And Fixing Ms Flange With Rubber Gasket Suitable For 80 Mm Bore Gi Pipe Line Including Welding With Pipe , Nuts , Bolts Gasket 3 Mm Thick Complete All As Specified And Directed. 60 External Electrification Works 61 Supply, Install And Commissioning Servo Controlled Oil Cooled Voltage Stabilizer 20 Kva For Automatic Operation, Is 9815: Part-1 : 1994 I Reaffirmed : 2014, Three Phase 4 Wire Output, 50 Hz, Naturally Oil Cooled, Indoor Type Specification As Under: -Winding Material Pure Electrolyte Copper Super Enamel / Glass Coated / Dcc, Wire / Stripno Load Losses Less Than 1.5%On Load Losses Less Than 2.5%Load Type Suitable For Unbalanced Voltage And Unbalanced Loadwinding Copper Wound ( Dimmer & Transformers ) Input Voltage Range 3Ø :270V To 480V Output Voltage 3Ø :415V ± 1% ( Adjustable ) , Response Time <10M Secefficency More Than 95%Rate Of Correction ( Phase & Neutral ) More Than 8V / Sec In Single Phase 12V / Sec In Three Phasewave Form Distortion - Nilenvironment / Installation Type Indoor Type ( Ip 32 With Cpri Certification ) Duty Cycle:Continuous ( 24 Hours ) Control Auto / Manual 62 Protection / Indicationstrip / Mccb Overload & Short Circuit Protectionhigh Low Voltage Cut Offsingle Phase Sequence Change Protectionsingle Phase Prevention Systemover Temperature Cut Offspike & Surge Protection - Spike & Surge Protection ( Type-Ii ) By Pass Arrangement ( For In Case Of Emergency ) Indicator Input / Output Voltage ( Per Phase ) Output Current ( Per Phase ) Frequencyfittings: Four Plain Rollerstwo Earthing Terminalsfour Lifting Hooksoil Filling Hole With Capoil Level Indicator 63 Salient Featuresmotor Variable Speed High Torque, Ac Servo Motor With Proportional Control Dg Compatible-Special Sensing Circuit To Maintain Output Voltageconstruction Rugged Construction With Caster Wheels For Easy Movementtransformer And Variac- Wound With Electrolyte Grade Copper Of 99% Purity, Low Loss Crgo Sheetsearthing - Suitable Earthing Terminal To Be Providedsuitability :All Power Factor Loadsclass Of Insulation: Class Emounting : Preferably On Wheelsindication:1.Led For Input On ( Yellow ) 2. Led For Output Healthy ( Green ) 3. Led For Output Trip ( Red ) 64 Supply, Install And Commissioning Servo Controlled Oil Cooled Voltage Stabilizer 25 Kva For Automatic Operation, Is 9815: Part-1 : 1994 I Reaffirmed : 2014, Three Phase 4 Wire Output, 50 Hz, Naturally Oil Cooled, Indoor Type Specification As Under: -Winding Material Pure Electrolyte Copper Super Enamel / Glass Coated / Dcc, Wire / Stripno Load Losses Less Than 1.5%On Load Losses Less Than 2.5%Load Type Suitable For Unbalanced Voltage And Unbalanced Loadwinding Copper Wound ( Dimmer & Transformers ) Input Voltage Range 3Ø :270V To 480V Output Voltage 3Ø :415V ± 1% ( Adjustable ) , Response Time <10M Secefficency More Than 95%Rate Of Correction ( Phase & Neutral ) More Than 8V / Sec In Single Phase 12V / Sec In Three Phasewave Form Distortion - Nilenvironment / Installation Type Indoor Type ( Ip 32 With Cpri Certification ) Duty Cycle:Continuous ( 24 Hours ) Control Auto / Manual 65 Protection / Indicationstrip / Mccb Overload & Short Circuit Protectionhigh Low Voltage Cut Offsingle Phase Sequence Change Protectionsingle Phase Prevention Systemover Temperature Cut Offspike & Surge Protection - Spike & Surge Protection ( Type-Ii ) By Pass Arrangement ( For In Case Of Emergency ) Indicator Input / Output Voltage ( Per Phase ) Output Current ( Per Phase ) Frequencyfittings: Four Plain Rollerstwo Earthing Terminalsfour Lifting Hooksoil Filling Hole With Capoil Level Indicator 66 Salient Featuresmotor Variable Speed High Torque, Ac Servo Motor With Proportional Control Dg Compatible-Special Sensing Circuit To Maintain Output Voltageconstruction Rugged Construction With Caster Wheels For Easy Movementtransformer And Variac- Wound With Electrolyte Grade Copper Of 99% Purity, Low Loss Crgo Sheetsearthing - Suitable Earthing Terminal To Be Providedsuitability :All Power Factor Loadsclass Of Insulation: Class Emounting : Preferably On Wheelsindication:1.Led For Input On ( Yellow ) 2. Led For Output Healthy ( Green ) 3. Led For Output Trip ( Red ) 67 Earthing Complete With Galvanised Steel Earth Plate Electrode 60Cm X 60Cm X6 Mm Thick Buried Directly In Gound ( Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level ) With Top Edge Of Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanised Iron Strip 32X6mm As Earth Lead Connected To Earth Plate By Means Of Bolt, Nuts Check Nuts And Washers Ofprotected By Provn Of Gi Light Grade Pipe 40Mm Bore Upto 7.5Mtr Including Provision Of Concrete Pit In Pcc ( 1:2:4 ) Type B-1 ( Using 20 Mm Graded Crushed Stone Aggregates ) With 40Mm Thick Cover Ofrcc ( 1:2:4 ) Reinforced With Xpm ( Weight Not Less Than 4Kg / Sqm ) And Frame Of Angle Iron 25X 25X3mm With Lugs 02 Nos And With 6 Mm Dia Ms Bar Handle Made To Shape, Gi Medium Grade 20 Mm Bore Pipe For Watering Perforated At Bottom 1.75 Mtr Long Placed On Top Edge Of Earth Plate, Common Salt And Charcoal Filling, Test Point Made Out Of Bronze / Gun Metal With Fixing Arrangement, Funnel, Wire Mesh And Excavation / Earth Work In Hard / Dense Soil, Returning Filling In And Removal Of Surplus Soil To A Distance Not Exceeding 50 Metre, All As Per Electrical Plate No 3 Of Ssr -2009 Part -I And Connecting To Earth Test Point All As Specified Or Indicated Including Testing On Completion, Complete All As Specified And Directed. Note : The Quoted Rate Of Earthing Shall Be Deemed To Include Cost Of 7.5 M Long 32X6mm As Earth Lead And Protection Pipe 40 Mm Bore Light Grade Gi Medium Grade 20 Mm Bore Watering Pipe. Any Variation In Length Shall Be Adjusted Through Deviation Order Based On Ssr Rates Adjusted With Quoted Rates. 68 Supply And Fixing Steel Tubular Swaged Poles Type 410Sp-31 ( 09 Metres ) With 300Mmx300mmx 6Mm Ms Base Plate, Finial Tapper Plug, Bolts, Nuts And Screws And Making Holes As Per Requirement All As Specified Including Painted With Two Coats Of Black Bituminouspaint Internally Throughout And Externally For Embedded Portion And Applying One Coat Of Red Oxide Primer, Making 05 Nos Strips Each 30Cm High With Super Enamel Paint ( Black And Yellow / White ) From Ground Level / Coping Upto 1.5M Painting With Two Coats Of Aluminium Paint For The Remaining Height Complete All As Specified And Directed.Note:- Necessary Excavation & Earth Work And Pcc In Coping / Foundation Shall Be Measured And Paid For Separately . 69 Supply And Fixing Gi Pipe, Bracket For Street Light Fittings Made Out Of 40 Mm Dia Gi Pipe Medium Grade, 1.20 M Long Bend To Shape Required, Angle / Shape With And Including Necessary Clamps, Nuts, Bolts & Washers Of Suitable Size And Including Two Coats Of Aluminium Paint Over A Base Coat Of Red Oxide Primer Complete All As Specified And Directed 70 Supply And Fix Loopin Loopout Fuse Junction Box Of Size 205 X 255 X 112Mm Made Out Of Thermo Plastic Polycarbonate With Ip 66 / 67 Weather Proof For Outdoor Installation ( With Knockouts Of Cable Entry ) Protection With Terminals And Locking Screw Fitted With 5 Amps Fuse Cutout-01 No With 6A Mcb, Suitable For Cable Size 10 Sqmm And Fixingon Steel Tubular Pole At A Height Not Less Than 1.5M Above Ground Levelwith The Help Of Clamps Two Nos Of F1 20 X 3 Mm And Suitable Nuts And Bolts Compelete All As Specified And Directed. 71 Supply And Fixing 60 W Lednew Generation Energy Saving & Environmental Friendly Long Life Versatile Pressure Die-Cast Aluminium Ip66 Roadway Luminaire With High Powerled As Light Source And Electronic Driver Suitable For Pole Dia Up To 40 Mm Complete All As Specified And Directed. 72 M&L For Installation, Commissioning & Testing Of Lt Panel Board ( Main Panel ) , Cpri Approved, Outdoor Type Fabricated Out Of 3.15 Mm Thick Crca Sheet, Dust And Vermin Proof, Totally Enclosed Metal Clad, Double Doortype Accessible From Front And Rear Side Both With Locking Arrangement 3 Phase 1.5 Sqmm Sigle Core Copper Wire System At Ac 440 V, 50 Hz With Colour Coded Aluminium Bus Bar Of Rated Current Capacity 200 Amp Complete Applied With Two Coats Of Synthetic Enamelledpaint Over A Coat Of Anti Corrosion Primer And Mounted On Angle Iron Of Size 50X50x6 Mm Grouted In Pcc Foundation Including Earth Work And Excavation Complete Suitable To Accommodate The Following Accessories : - Supply And Fabricated Lt Distrubution Panel Board With 3.15 Mm Thick Crca Sheet Aluminium Busbar 4 Strip With Coloured R, Y, B & Neutral Of Size ( 32X6 ) Mm.Angle Iron For Frame Work Of Size 50X50x6mm Thick For Panel Mountingincoming Mccbfour Pole Mccb 63 Amp, 50Hz 415 Volts With Repturing Capacity 16 Ka- 01 Nosoutgoing Mccbfour Pole Mccb 40 Amp, 50Hz 415 Volts With Repturing Capacity 10 Ka- 01 Nosmcb, Tpn, 20 Amp - 01 No.Mcb, Tpn, 10 Amp - 01 No.Indicator Led Lamp R.Y.Bdigital Voltmeter 0-500 Volt With Selector Switchdigital Ammeter 0-400 Amp With Suitable Ctsstar Delta Starter Fully Automatic As Per Suitable Capacity Of Submersible Motor 17.5 Hp Alongwith Three Phase And Over Load Protection Relay & Single Phase Preventor.Note : Cost For Construction Of Plateform For Panel Of Brick Masonary Work In Cm 1:6 With Foundationpcc 1:4:8 Type D-2Including Plaster Work, Pcc Copping 1:2:4 ( 40 Mm Thick Stone Aggerate ) , Deemed To Be Included In The Item Rate. No Extra Payment Will Be Made. 73 M&L For Installation, Commissioning & Testing Of Lt Panel Board ( Main Panel ) , Cpri Approved, Outdoor Type Fabricated Out Of 3.15 Mm Thick Crca Sheet, Dust And Vermin Proof, Totally Enclosed Metal Clad, Double Doortype Accessible From Front And Rear Side Both With Locking Arrangement 3 Phase 1.5 Sqmm Sigle Core Copper Wire System At Ac 440 V, 50 Hz With Colour Coded Aluminium Bus Bar Of Rated Current Capacity 200 Amp Complete Applied With Two Coats Of Synthetic Enamelledpaint Over A Coat Of Anti Corrosion Primer And Mounted On Angle Iron Of Size 50X50x6 Mm Grouted In Pcc Foundation Including Earth Work And Excavation Complete Suitable To Accommodate The Following Accessories : - Supply And Fabricated Lt Distrubution Panel Board With 3.15 Mm Thick Crca Sheet Aluminium Busbar 4 Strip With Coloured R, Y, B & Neutral Of Size ( 32X6 ) Mm.Angle Iron For Frame Work Of Size 50X50x6mm Thick For Panel Mountingincoming Mccbfour Pole Mccb 50 Amp, 50Hz 415 Volts With Repturing Capacity 16 Ka- 01 Nosoutgoing Mccbfour Pole Mccb 25 Amp, 50Hz 415 Volts With Repturing Capacity 10 Ka- 01 Nosmcb, Tpn, 16 Amp - 01 No.Mcb, Tpn, 10 Amp - 01 No.Indicator Led Lamp R.Y.Bdigital Voltmeter 0-500 Volt With Selector Switchdigital Ammeter 0-400 Amp With Suitable Ctsstar Delta Starter Fully Automatic As Per Suitable Capacity Of Submersible Motor 17.5 Hp Alongwith Three Phase And Over Load Protection Relay & Single Phase Preventor.Note : Cost For Construction Of Plateform For Panel Of Brick Masonary Work In Cm 1:6 With Foundationpcc 1:4:8 Type D-2Including Plaster Work, Pcc Copping 1:2:4 ( 40 Mm Thick Stone Aggerate ) , Deemed To Be Included In The Item Rate. No Extra Payment Will Be Made. 74 Material And Labour For Sand Cushioning With A Layer Of Fine Sand 8 Cm Thick Before Laying Of Cable And 15 Cm Thick After Laying Of Cable In Trenches Complete All As Specified. ( Ee=28, Dg Set=4 ) Note:Measurement Shall Be Taken Only After Punning Down Sand Cushioning. 75 Material And Labour For Dry Bricks Of Sub Class B ( Old Size ) Desgination 75 Laid Perpendicular To Axis Of Cable In Trenches For Cable Protection Of Cable With Width Equal To Length Of Brick Complete All As Specified And Directed. ( Ee=2500, Dg Set=320 ) 76 Supply And Fixing Pvc Insulated Unsheathed, Frls, Copper Conductor Strainded Cable 1.5 Sqmm, 3 Core For Connection From Junction Box To Street Light Fitting Complete All As Specified And Directed. 77 Internal Electrification Works 78 Material And Labour For Point Wiring Complete Withpvc Insulated Unsheathed 1100 Volt Grade Frls Cable With Multi Stranded Copper Conductor Of Size 1.5 Sq Mm ( Nominal Area ) Drawn Through And Including Medium Pvc Conduit Of Suitable Size ( As Per Conductor Run ) With All Fittings And Accessories Concealed In Wall And Ceiling Portion Inculding Concealed Sunk In Pressed Steel Terminal Boxes Of Not Less Than 2Mm Thick Required Size Factory Made And Painted With Synthetic Enamel Paint Black Paint With Including Top Cover 3Mm Thick Plastic Laminated Sheet Of Required Colour Fixed With Brass Screws And Cup Washers With And Including 1.5 Sqmm Frls Multi Stranded Copper Conductor As Continuous Earth Wire Drawn In Same Concealed Conduit, Connected To Main Earth And Earth Dolly Including Cutting Chases And Making Good As Per Existing Specification For One Light / Fan / Exhaust Fan Point Controlled By One Way Switch 5Amp Complete All As Specified And Directed. 79 Material And Labour For Point Wiring Complete Withpvc Insulated Unsheathed 1100 Volt Grade Frls Cable With Multi Stranded Copper Conductor Of Size 1.5 Sq Mm ( Nominal Area ) Drawn Through And Including Medium Pvc Conduit Of Suitable Size ( As Per Conductor Run ) With All Fittings And Accessories Concealed In Wall And Ceiling Portion Inculding Concealed Sunk In Pressed Steel Terminal Boxes Of Not Less Than 2Mm Thick Required Size Factory Made And Painted With Synthetic Enamel Paint Black Paint With Including Top Cover 3Mm Thick Plastic Laminated Sheet Of Required Colour Fixed With Brass Screws And Cup Washers With And Including 1.5 Sqmm Frls Multi Stranded Copper Conductor As Continuous Earth Wire Drawn In Same Concealed Conduit, Connected To Main Earth And Earth Dolly Including Cutting Chases And Making Good As Per Existing Specification For One Three Pin 5Amp Switch Socket Outlet Point On Independent Board Complete All As Specified And Directed. 80 Material And Labour For Point Wiring Complete Withpvc Insulated Unsheathed 1100 Volt Grade Frls Cable With Multi Stranded Copper Conductor Of Size 2.5 Sq Mm ( Nominal Area ) Drawn Through And Including Medium Pvc Conduit Of Suitable Size ( As Per Conductor Run ) With All Fittings And Accessories Concealed In Wall And Ceiling Portion Inculding Concealed Sunk In Pressed Steel Terminal Boxes Of Not Less Than 2Mm Thick Required Size Factory Made And Painted With Synthetic Enamel Paint Black Paint With Including Top Cover 3Mm Thick Plastic Laminated Sheet Of Required Colour Fixed With Brass Screws And Cup Washers With And Including 1.5 Sqmm Frls Multi Stranded Copper Conductor As Continuous Earth Wire Drawn In Same Concealed Conduit, Connected To Main Earth And Earth Dolly Including Cutting Chases And Making Good As Per Existing Specification For One Six Pin Socket Outlet Two In One 6 / 16 Amp Point On Independent Board Complete All As Specified And Directed. 81 Supply And Fixing Ceiling Fans Complete With Blades, Down Rods With Accessories, 230 V, 1200 Mm Sweep, Minimum Air Delivery 210 Cfm With Service Value 6.00 Bee, Five Star Rated With Brushless Direct Current Motor ( Bldc ) And All Accessories And Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete All As Specified And Directed. 82 Supply And Fixingexhaust Fan Made Of Sturdy Engineering Plastic Body Complete With Louvers Shutter Including Mounting Frame, Voltage 230V, 50 Hz, 1200 Rpm, 36 Watt, Light Duty, Copper Winding Of Sweep 250Mm And All Accessories And Including Connecting Up With 1.50 Sqmm Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete All As Specified And Directed. 83 M&L For Earthing Complete With Galvinised Steel Earthplate Electrode 60 Cm X 60Cm X 6Mm Thickburied Directly In Ground ( Earth Pit Notless Than2.25 Mtr Deep Belownormal Groundlevel ) With Top Edgeof Platenot Less Than1.5 Mtr Belownormal Ground Level , Connectingto Galvanised Iron Wire 4Mm Dia, Protected By Galvanised Iron Light Grade Pipe 15Mm Dia And Galvanised Iron Water Pipe Medium Grade 20Mm Dia Upto 7.5 Mtr Including Provnof Concretepit Inpcc ( 1:4:8 ) Type D-2 Using 40 Mm Graded Stone Aggregates, Coping Shall Be Pcc 1:3:6 Type C1 Using 20 Mm Graded Stone Aggregate, Top Cover 50Mm Thick Of Rcc 1:2:4 Type B1 Using 20Mm Graded Stone Aggregate Reinforced With 8Mm Dia Tmt Bars @80Mm C / C Both Ways With Angle Iron Frame, Pit Shall Be Given 15Mm Thick Plaster In Cm 1:4 , Funnel With Wire Gauge ( 0.68Mm ) And Charcoal Dust And Common Salt All As In Shown In Electrical Plate No-03 Of Mes Ssr Pt-I And Specified And Including All Excavation And Earth Work And Connecting The Earthing Complete All As Specified And Directednote: The Unit Quoted Rate Of Earthing Shall Be Deemed To Included Cost Of 7.5 M Long Gi Earth Wire 4Mm Dia And Protection Pipe Gi 15 Mm Dia Light Grade, Gi 20Mm Dia Medium Grade Watering Pipe. Any Variation In Length Shall Be Adjusted Through Deviation Order. 84 Supply And Fixing Led Ligth Fittings 1X 20W, 220 Volt , Ac, Decorative Box Type With Driver, Surface / Pendent Mounting Type With White Reflector Cover Fitted To The Body Including Led Tube Rod Connecting Up With And Including Three Core Flexible Cable Conductore Cable Of Suitable Size From Ceiling Rose Completeall As Specified And Directed. 85 Supply And Fixing Led Building Security Light With Pressure Die Cast Aluminum Housing With Polycarbonate Cover, Finless Design, Dedicated Peanut Optics, > 100 Lumen / W System Efficiency, Minimum 2500 System Lumens, 45W System Wattage ( Including Driver ) , Color Temperature > 5700K, Cri>80, Ip65 Protection, Ik07 Ratingincluding 25Mmbore Gi Pipe Light Grade Of 1.5 Meter Long Bend Pipe ( Bend At 120° ) With And Including 40 X 6Mm Fi Clamps And Fixing Accessories Etc.The Potted Electronic Driver With Thd<10%, Pf>0.95, Led Fitting Is Complete All As Per Oem Specified And Directed. Led Driver And Housing Is Of Same Make As Of Light Fitting. All Type Of Testing For Photometry, Electrical And Electronic Parameters Is Done In Babi Approved Lab Complete All As Specified And Directed 86 Supply And Fixing Mcb Sp 240 Volt, 50Hz , 10 Ka, C Series Of Rating06 To 32 Amp Confirming To Is / Iec-60898-1 & Is / Iec-60947-2 Completeall As Specified And Directed. 87 Supply And Fixing Mcb Spn 240 Volt, 50Hz , 10 Ka, C Series Of Rating32 Amp Confirming To Is / Iec-60898-1 & Is / Iec-60947-2 Completeall As Specified And Directed.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	09-Oct-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	16-10-2023
2	16-Oct-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	21-10-2023
3	21-Oct-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	24-10-2023

INR 1000 /-

INR 259000.0 /-

INR 1.84 Crore /-

Name of Work: AUGMENTATION OF WATER SUPPLY INFRA AT URI

Sl. No.	Item Description
1	Note: (i) Please refer Schedule "A" Notes given in tender documents. (ii) Item from Srl No. 3 to 6 of this document shall be Part-XII (Miscellaneous Items of Works) of BOQ. (iii) Unless otherwise specified, earth work and excavation shall be measured and paid separately. (iv)This schedule "A" Part-XII (Miscellaneous items of Works) is not estimatedby MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
2	LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS
3	Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule "A" Part-I brought forward from serial page No. 23
4	Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule "A" Part-II brought forward from serial page No. 24
5	Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule "A" Part-III brought forward from serial page No. 26
6	Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule "A" Part-IV brought forward from serial page No. 27
7	Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule "A" Part-V brought forward from serial page No. 29
8	Lump sum price worked out by the contractor for ROAD/PATH/CULVERT WORKS as listed in Schedule "A" Part-VI brought forward from serial page No. 31
9	Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS listed in Schedule "A" Part-VII brought forward from serial page No. 32
10	Lump sum price worked out by the contractor for COMPOUND WALL/FENCING/GATE WORKS as listed in Schedule "A" Part-VIII brought forward from serial page No. 34
11	Lump sum price worked out by the contractor for SITE CLEARANCE & EARTH WORKSas listed in Schedule "A" Part-IX brought forward from serial page No. 35
12	Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule "A" Part-X brought forward from serial page No. 37
13	Lump sum price worked out by the contractor for DG SET WORKS as listed in Schedule "A" Part-XI brought forward from serial page No. 38
14	DG SET WORKS
15	Supply installation Testing & Commissioning of ECO friendly Diesel Engine driven generating set outdoor type of capacity 25 KVA with 42 BHP Engine capacity (Primeover) after derating, CPCB-IInearest higher side 400/440 volts, AC 3 phase, 50 HZ , 4 wire, 0.8 PF directly coupled alternator and engine water cooled with AMF Panel common steel base fixed on Cement concrete in foundation as per OEM recommendation DG set of 25 KVA platform with inbuilt AMF panel with 2 Nos. suitable size of contactors as 01 no for main supply and 01 No. for DG supply as per manufacturer recommendation and other accessories comprising of following. Note :- 1. The DG Set should be designed as per latest emission norms, considering the derating factor of altitude 5204 ft above sea level (Uri) extreme cold climate in winters.The ambient temp varies from (-) 05 degree Celsius (in winter) to (+) 35 degree Celsius (in summer). 2. After considering of derating factor by manufactuturer on above location in Note 1, the net output is reqdof 25 KVA DG set. 3.The Plinth should be as per Manufacturer Recommendation and the rate of plinth is deemed to be included in quoted rate. (A) ENGINE- ECO friendly for emission and noise (PCB NORMS COMPLIANCE) 4 stroke diesel Engine confirming to BS std developing, 1500 RPM water cooled complete with a provision for 10% overload for one hour on 25 KVA.
16	i) Fly wheel with starter ring for generating set. ii) Dry type Air filter. iii) Lub oil cooler assembly with accessories. iv) Exhaust air manifold. v) Exhaust silencer. vi) Expansion bellow. vii) Exhaust gas turbocharger. viii) Fuel filter (pre micro). ix) Lubrication oil filter. x) 12V electrical starting system with starting motor & battery charging alternator with self-starter and other auto electric accessories as recommended by manufacturer. xi) Centrifugal by-pass filter. xii) Front & rear engine mounting supports. xiii) Engine control panel consisting of OFF/ON/START keys lub oil pressure gauge, Ammeter, electronic Hour meter, speedometer. xiv) Safety against low lub oil pressure. xv) Engine operation/Maintenance, spare parts Manual. xvi) Engine test certificate. xvii) Cold starting kit xvii) Mechanical Governor (B)ALTERNATOR- Salient pole brushless copper wound type suitable for direct couple to engine self-excited, self-regulated with fast response thermistor type electronic automatic voltage withhold output voltage with in desired limit (+1%) Dynamicallybalanced 400/415 volts AC 3 phase 50 HZ, 4 wire 0.8 PF lagging 25 KVA 1500 RPM star connected (4 wire) screen protected drip proof enclosures with radial fan mounted on rotor with insulation class - H suitable for ambient temperature varing from (-) 05 degree Celsius (in winter) to (+) 35 degree Celsius (in summer) (Uri)with following accessories.
17	i) One MS frame suitable for mounting of Engine & Alternator. ii) Fuel tank of suitable capacity as per Manufacturer recommendation complete with fuel gauge inlet/outlet connections drain valve with plug etc. iii)Battery of suitable capacity as per manufacturer recommendation with copper leads and terminalsof suitable size iv) One set of AVM pads fitted on base frame. (C) ACOUSTIC ENCLOSURE- Supply & install of Acoustic Enclosure suitable for 25 KVA DG set the degree of protection IP-42 conforming to IS - 2147 as under: i) Fabricated out of CRCA sheet of suitable thickness as per manufacture design. Polyster based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated. ii) The doors are gasketed with EPDM gaskets. iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 of 50mm thickness and density at 96 Kg /M3 covered with fiber glass cloth and perforated powder coats sheet specially designed alienators (Sound controller) at air entry and exit of the container noise level shall be not exceed 75 Db at 1 meter distance as per CPCB norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button outside the container. vi) Provn of light inside the canopy 20W LED fitting with wiring and control switch.
18	Supply installation Testing & Commissioning of ECO friendly Diesel Engine driven generating set outdoor type of capacity 20 KVA with not less than 33 BHP Engine capacity (Primeover) after derating, CPCB-IInearest higher side 400/440 volts, AC 3 phase, 50 HZ , 4 wire, 0.8 PF directly coupled alternator and engine water cooled with AMF Panel common steel base fixed on Cement concrete in foundation as per OEM recommendation DG set of 20 KVA with inbuilt AMF panel as per manufacturer recommendation and other accessories comprising of following. Note :- 1. The DG Set should be designed as per latest emission norms, considering the de-rating factor of altitude 5204 ft above sea level (Uri) extreme cold climate in winters.The ambient temp varies from (-) 05 degree Celsius (in winter) to (+) 35 degree Celsius (in summer). 2. After considering of de-rating factor by manufacturer on above location as ser no 1 the net output is requiredof 20 KVA DG set. 3.The Plinth should be as per Manufacturer Recommendation and the rate of plinth is deemed to be included in quoted rate. (A) ENGINE- ECO friendly for emission and noise (PCB NORM COMPLIANCE) 4 stroke diesel Engine confirming to BS std developing 1500 RPM water cooled complete with a provision for 10% overload for one hour on 20 KVA.
19	i) Fly wheel with starter ring for generating set. ii) Dry type Air filter. iii) Lub oil cooler assembly with accessories. iv) Exhaust air manifold. v) Exhaust silencer. vi) Expansion bellow. vii) Exhaust gas turbocharger. viii) Fuel filter (pre micro). ix) Lubrication oil filter. x) 12V electrical starting system with starting motor & battery charging alternator with self starter and other auto electric accessories as recommended by manufacturer. xi) Centrifugal by-pass filter. xii) Front & rear engine mounting supports. xiii) Engine control panel consisting of OFF/ON/START keys lub oil pressure gauge, Ammeter, electronic Hour meter, speedometer. xiv) Safety against low lub oil pressure. xv) Engine operation/Maintenance, spare parts Manual. xvi) Engine test certificate. xvii) Cold starting kit xvii) Mechanical Governor (B) ALTERNATOR- Salient pole brushless copper wound type suitable for direct couple to engine self-excited, self-regulated with fast response thermistor type electronic automatic voltage withhold out put voltage with in desired limit(+1%) Dynamicallybalanced 400/415 volts AC 3 phase 50 HZ, 4 wire 0.8 PF lagging 20 KVA 1500 RPM star connected (4 wire) screen protected drip proof enclosures with radial fan mounted on rotor with insulation class- H suitable for ambient temperature varies from (-) 05 degree Celsius in winter to (+) 35 degree Celsius in summer (Uri)with following accessories:
20	i) One MS frame suitable for mounting of Engine & alternator. ii) Fuel tank of suitable capacity as per Manufacturer recommendation complete with fuel gauge inlet/outlet connections drain valve with plug etc. iii)Battery of suitable capacity as per manufacturer recommendation with copper leads and terminalsof suitable size iv) One set of AVM pads fitted on base frame. (C) ACOUSTIC ENCLOSURE- Supply & install of Acoustic Enclosure suitable for 20 KVA DG set the degree of protection IP-42 conforming to IS - 2147 as under: - i) Fabricated out of CRCA sheet of suitable thickness as per manufacture design. Polyster based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated. ii) The doors are gasketed with EPDM gaskets. iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 of 50mm thickness and density at 96 Kg /M3 covered with fiber glass cloth and perforated powder coats sheet specially designed alienators (Sound controller) at air entry and exit of the container noise level shall be not exceed 75 Db at 1 meter distance as per CPCB norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button out side the container. vi) Provn of light inside the canopy 20W LED fitting with wiring and control switch
21	EXTERNAL WATER SUPPLY WORKS
22	Material and labour for trial drilling bore holein alluvial strata for construction of deep borewell of 200mm dia with any method as reverse rotary/forward rotary/Odex/DTH rig drilling machine complete with driling bits, dril shaft and all other accessories, complete with transportation, errection of camp at site and removal of all tools and plants on completion of borewell work for the depth upto 60 metre from ground level as complete all as specified and directed. (Location : 2 Bore well for Uri Garrison)
23	All as per item No. 4.01 here-in-before but depth exceeding 60 metre and upto 120 metre below ground level.
24	All as per item No. 4.01 here-in-before but depth exceeding 120 metre and upto 180 metre below ground level.
25	All as per item No. 4.01 here-in-before but depth exceeding 180 metre and upto 300 metre below ground level.
26	Notes for Item No 4.01 to 4.04:- 1. The Contractor shall execute the borewell work first. Only after successful development of Borewell, execution of rest of the work as per BOQ shall be undertaken complete all as directed by Engineer-in-charge. 2.(a)In case of sufficient yield and potable water quality : (i) 1st trial borewill be developed as per the BOQ. (b) In case of insufficient yield or non-potable water quality (i) 1st trial bore will be abandoned. (ii) 2nd trial borewill be carried out by the contractor in the locations as earmarked by Engr-in-Charge. 3.Contractor will carry out the 2nd trial bore in condition of 2 (b) above:   (a) In case of sufficient yield and potable water quality (i) 2nd trial borewill be developed as per the BOQ. (b)In case of insufficient yield or non-potable water quality (i) 2nd trial bore will be developed as per the BOQ & water will be used for other purpose.   (c)Incase of no yield (i) 2nd trial borewill be abandoned (ii) No further trial bore will be carried out. (iii) Contractor will be paid for Item No 4.01 to 4.04 of BOQ & the contract will be FORECLOSED. 4.The cost of necessary fuel, lubricant and chemical extra required for construction of work shall be deemed to be included in the unit quoted rate by the tenderer and nothing extra shall be paid for these items.
27	Material and labour for development of bore with reaming upto 550mm for borewell casing pipe of 250mm dia, for depth upto 60metre from ground level complete all as specified and directed.
28	Material and labour for development of bore with reaming upto 550mm for borewell casing pipe of 200mm dia, for depth from 60metre to 200 metre from ground level complete all as specified and directed.
29	Material and labour for development of bore with reaming upto 550mm for borewell casing pipe of 200mm dia, for depth from 200metre to 300 metre from ground level complete all as specified and directed.
30	Supplying, assembling, lowering and fixing in position 250mm nominal bore MS ERW ISI marked casing blank pipe having wall thickness 8mm as per IS -4270 (2001) and jointing with electric arc welding, random length of pipe 3 to 6 metre, including necessary fittings, ie. coupling, jointing and painting with two coats of bituminous paint of external surfaces of pipe upto depth of 60 metre below ground level complete all as specified and directed.
31	Supplying, assembling, lowering and fixing in position 200mm nominal bore MS ERW ISI marked casing blank pipe having wall thickness 8mm as per IS - 8110 and jointing with electric arc welding,random length of pipe 3 to 6 metre, including necessary fittings, ie. coupling, jointing and painting with two coats of bituminous paint of external surfaces of pipe upto depth from 60 metreto 240 metre depth below ground level complete all as specified and directed.
32	Supplying, assembling, lowering and fixing in position 200mm nominal bore MS ERW ISI marked casing fine cut pipe (Stainer) having wall thickness 8mm as per IS - 8110 with and including slot of suitable size and numbers and jointing with electric arc welding,random length of pipe 3 to 6 metre, including necessary fittings, ie. coupling, jointing and painting with two coats of bituminous paint of external surfaces of pipe upto depth from 240 metreto 300 metre depth below ground level complete all as specified and directed.
33	Material and Labour for MS Sleeves 10mm thick suitable for 200mm MS pipe, arc welding at joints, width 200mm complete all as specified and directed.
34	Material and Labour for MS Sleeves 10mm thick suitable for 250mm MS pipe, arc welding at joints, width 200mm complete all as specified and directed.
35	Material and labour for electro logging of bore well for designing and lowering of pipe assembly on logging report/graph complete all as specified and directed.
36	Material and labour for reducing socket made out of MS plate 12mm thick, size 250/200mm bore MS pipe incld jointing with electric arc welding complete all as specified and directed.
37	Material and labour for bail plug made out of MS housing pipe 200mm dia, wall thickness 8mm, one and half metre long blocked with 10mm thick MS plate with bottom hook incld jointing with electric arc weldingcomplete all as specified and directed.
38	Material and labour for centre guide made of MS flat iron (40x6mm) incld jointing with electric arc welding with casing complete all as specified and directed.
39	Supply and filling of cleaned and washed, pea gravel of size 3mm to 6mm packing around the pipe bottom to ground level complete all as specified and directed.
40	Material and labour for MS clamp suitable for 250mm dia housing pipe made for 150 x 20mm thick plate including bolts/nuts and washers of required size complete all as specified and directed.
41	Material and labour for well cap made out of 6mm thick MS plate suitable for 250mm housing pipe to provide cover at top of borewell complete with locking arrangement using 25mm dia, 400mm long MS bolt slotted through the cap and casing pipe with and including 1 No lock complete all as specified and directed.
42	Material and labour for development of bore with air compressor not less than 400 PSI compressor over pumping unit till sand free water obtained and testing the yeild for duration as under complete all as specified and directed for first 24 hours by using air compressor complete all as specified and directed. NOTES: - (a) Contractor has to provide own DG Set/Prime mover to run compressor and over pumping set. (b) All type of T&P and transportation required for development of bore shall be arrange by the contractor and cost of these items shall be deemed to be included in the unit quoted rate.
43	All as per item No. 4.20 here-in-before but subsequent48 hours after first 24 hours with over pumping
44	Material and labour for foundation for holding borewell assembly of size 1.0m x 1.0m x 0.5m at ground level made of PCC (1:2:4) type B-2 using 40mm graded crushed stone aggregate with GI pipe 80mm bore medium grade at three places, embedded through out the block 1.70metre length for feeding gravels and GI plug and socket fixed on top complete all as specified and directed.
45	Material and labour for strata sample box with glass cover 3mm thick and having minimum internal dimension 1000mm x 1000mm x 100mm made out of Shisham 1st class hard wood planks, 20mm thick with hinges staple including painting two coats of synthetic enamel paint over a coat of primer complete with soil sample placed in position of 200mm wide made with wood planks 20mm thick complete all as specified and directed. NOTE: - The number of poriton may vary with type of soil starata met and over all length of the bore and can be increased beyond 1000mm x 1000mm .
46	Material and labour for yield test for the borewell by continously for 16 hours, in the presence of IEM, to determine using "V" notch constructed at site complete all as specified and directed. NOTE: - Chemical/bacteriological analysis and potability test of water obtained from borewell shall be done from approved lab and submitting the report in triplicate shall be deemed to be included in the unit quoted rate.
47	Material and labour for tripod made out of heavy duty jointless GI pipe 80mm bore suitable for 2 ton capacity with nut and bolt and hook for suitable sizecomplete all as specified and directed.
48	Supply and fixing chain pulley block 2 ton capacity with heavy duty chain suitable for working 3metre above ground level, chain 10metre long complete all as specified and directed.
49	Supply, installation, testing and commissioning of Submersible pump, electric driven 415 V, TP suitable for 250 mm dia bore well (Casing pipe size 250 mm) supply and Install complete upto17.5 HPcalculated, discharge 333 LPM, Head not less than 106 Mtrfor Borewell No-1 including suitable size of flexible steel rope with clamp for holding submersible motor pump complete all as specified and directed .
50	Supply, installation, testing and commissioning of Submersible pump, electric driven 415 V, TP suitable for 250 mm dia bore well (Casing pipe size 250 mm) supply and Install complete upto 12.5 HPcalculated, discharge 333 LPM, Head not less than 71 Mtr for Borewell No-2 including suitable size of flexible steel rope with clamp for holding submersible motor pump complete all as specified and directed .
51	Supply, laying and testing copper cable of size 25qmm, 3 core for submersible pump complete all as specified and directed.
52	Supply, installation, testing and commissioning of chemical dosing system suitable to inject solution upto 25LPH comprising dosing pump coupled with single phase electric motor of capacity 0.5HP, 1440 RPM assembly including DOL starter suitable capacity with agitator dosing and agitator in single motor, agitator with SS sweep blade duly FRP coated, FRP double tank 150 litre capacity, complete unit mounted on heavy duty MS fabricated frame duly painted with anti corrosive paint including packing, electrical & pumping works etc. complete all as specified and directed. NOTE: - The cost of electrical connection like point wiring and socket point requreid for smooth functioning of dosing plant and T&P shall be included in the unit quoted rate.
53	Supply and fixing UPVC pipe of 20mm dia confirming to IS 4985/2000 complete including necessary clamps and fittings, jointing material etc. complete all as specified and directed.
54	Supply and lowereing in borewell, MS ERW IS-4270 (2001) column pipe of size 100mm bore in 3metre length, both ends flanged with 10mm thick MS flange including cutting holes (04 Nos) of size 10mm dia for passing the submersible cable, with and including suitable size of covering nuts, bolts, washers and rubber gasket complete all as specified and directed. Note: - All arrangements and T&P requried for lowering the column pipe in the bore shall be made by the contractor under their own arrangement at no extra cost.
55	M&L for cast iron Air Valves with two air outlets, conforming to IS-14845 of size 100 mm dia bore and fixing up in cast iron water supply mains complete all as specified and directed.
56	Material and labour for construction of brick valve pit of size (0.9mx0.9mx1.5m) internal dimensions including all excavation and earth work in any type of soil, returning filling in and disposal of soil to a distance of not exceeding 50m and depositing as directed, PCC as in foundation of the mix 1:4:8 type D-2 using 40mm graded crushed stone aggregate, PCC as in coping in 1:2:4 type B-2 using 12.50mm graded crushed stone aggregate incl form work, brick masonary in cement mortar 1:4 using sub class "B" bricks, rendering 12mm thick in cement mortar 1:4 internally finihsed even and fair and pointing flush externally as the work proceed in the same mortar, valve pit cover withMS sheet cover 3.15mm thick welded to mild steel angle iron 50x50x6mm frame with handle and locking arrangement, painting all the exposed surfaces of steel with two coats of synthetic enamel paint over a coat of primer and the portion embedded in concrete with two coats of black bituminous paint complete all as specified and directed.
57	Supply, laying and jointing pipe ductile iron, spigot and socketed end including fittings class K-7, 100mm dia suitable for tyton joint complete all as specified and directed.
58	Material and labour for tyton joint suitable for 100mm bore DI pipe including jointing material complete all as specified and directed.
59	Supply and fixing MS flange with rubber Gasket suitable for 80 mm bore GI pipe line including welding with pipe , nuts , bolts gasket 3 mm thick complete all as specified and directed.
60	EXTERNAL ELECTRIFICATION WORKS
61	Supply, install and commissioning Servo controlled oil cooled Voltage Stabilizer 20 KVA for automatic operation, IS 9815: Part-1 : 1994 I Reaffirmed : 2014, three phase 4 wire output, 50 Hz, naturally oil cooled, indoor type specification as under: - Winding Material Pure Electrolyte Copper Super Enamel/Glass Coated/DCC, Wire/Strip No Load Losses Less than 1.5% On Load Losses Less than 2.5% Load type Suitable for Unbalanced Voltage and Unbalanced Load Winding Copper Wound (Dimmer & Transformers) Input voltage range 3Ø :270V to 480V Output voltage 3Ø :415V ± 1% (adjustable), Response Time <10m sec Efficency more than 95% Rate of correction (Phase & Neutral) More than 8V/Sec in Single Phase 12V/Sec in Three Phase Wave form Distortion - Nil Environment/Installation Type Indoor Type (IP 32 With CPRI Certification) Duty cycle:Continuous (24 Hours) Control Auto/Manual
62	Protection/Indications Trip/MCCB Overload & Short Circuit Protection High Low Voltage Cut Off Single Phase Sequence Change Protection Single Phase Prevention System Over Temperature Cut Off Spike & Surge Protection - Spike & Surge Protection (Type-II) By Pass Arrangement (for in case of emergency) Indicator Input/Output Voltage (Per Phase) Output Current (Per Phase) Frequency Fittings: Four Plain Rollers Two Earthing Terminals Four lifting hooks Oil Filling hole with cap Oil Level Indicator
63	Salient Features Motor Variable speed high torque, AC servo motor with proportional control DG Compatible-Special sensing circuit to maintain output voltage Construction Rugged construction with caster wheels for easy movement Transformer and Variac- Wound with Electrolyte grade Copper of 99% purity, low loss CRGO Sheets earthing - Suitable Earthing Terminal to be provided Suitability :All power factor loads Class of Insulation: Class E Mounting : Preferably on Wheels Indication:1.LED for input on (Yellow) 2. LED for output healthy (Green) 3. LED for output Trip (Red)
64	Supply, install and commissioning Servo controlled oil cooled Voltage Stabilizer 25 KVA for automatic operation, IS 9815: Part-1 : 1994 I Reaffirmed : 2014, three phase 4 wire output, 50 Hz, naturally oil cooled, indoor type specification as under: - Winding Material Pure Electrolyte Copper Super Enamel/Glass Coated/DCC, Wire/Strip No Load Losses Less than 1.5% On Load Losses Less than 2.5% Load type Suitable for Unbalanced Voltage and Unbalanced Load Winding Copper Wound (Dimmer & Transformers) Input voltage range 3Ø :270V to 480V Output voltage 3Ø :415V ± 1% (adjustable), Response Time <10m sec Efficency more than 95% Rate of correction (Phase & Neutral) More than 8V/Sec in Single Phase 12V/Sec in Three Phase Wave form Distortion - Nil Environment/Installation Type Indoor Type (IP 32 With CPRI Certification) Duty cycle:Continuous (24 Hours) Control Auto/Manual
65	Protection/Indications Trip/MCCB Overload & Short Circuit Protection High Low Voltage Cut Off Single Phase Sequence Change Protection Single Phase Prevention System Over Temperature Cut Off Spike & Surge Protection - Spike & Surge Protection (Type-II) By Pass Arrangement (for in case of emergency) Indicator Input/Output Voltage (Per Phase) Output Current (Per Phase) Frequency Fittings: Four Plain Rollers Two Earthing Terminals Four lifting hooks Oil Filling hole with cap Oil Level Indicator
66	Salient Features Motor Variable speed high torque, AC servo motor with proportional control DG Compatible-Special sensing circuit to maintain output voltage Construction Rugged construction with caster wheels for easy movement Transformer and Variac- Wound with Electrolyte grade Copper of 99% purity, low loss CRGO Sheets Earthing - Suitable Earthing Terminal to be provided Suitability :All power factor loads Class of Insulation: Class E Mounting : Preferably on Wheels Indication:1.LED for input on (Yellow) 2. LED for output healthy (Green) 3. LED for output Trip (Red)
67	Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x6 mm thick buried directly in gound (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32x6mm as earth lead connected to earth plate by means of bolt, nuts check nuts and washers ofprotected by provn of GI light grade pipe 40mm bore upto 7.5mtr including provision of concrete pit in PCC (1:2:4)type B-1 ( using 20 mm graded crushed stone aggregates )with 40mm thick cover ofRCC (1:2:4) reinforced with XPM (Weight not less than 4kg/Sqm) and frame of angle iron 25x 25x3mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI medium grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and excavation/earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No 3 of SSR -2009 Part -I and connecting to earth test point all as specified or indicated including testing on completion, complete all as specified and directed. Note : The quoted rate of earthing shall be deemed to include cost of 7.5 m long 32x6mm as earth lead and protection pipe 40 mm bore light grade GI medium grade 20 mm bore watering pipe. Any variation in length shall be adjusted through deviation order based on SSR rates adjusted with quoted rates.
68	Supply and fixing Steel tubular swaged poles type 410SP-31 (09 metres) with 300mmx300mmx 6mm MS base plate, finial tapper plug, bolts, nuts and screws and making holes as per requirement all as specified including painted with two coats of black bituminouspaint internally throughout and externally for embedded portion and applying one coat of red oxide primer, making 05 Nos strips each 30cm high with super enamel paint (Black and Yellow/white) from ground level/coping upto 1.5m painting with two coats of aluminium paint for the remaining height complete all as specified and directed. Note:- Necessary excavation & earth work and PCC in coping / foundation shall be measured and paid for separately .
69	Supply and fixing GI pipe, bracket for street light fittings made out of 40 mm dia GI Pipe medium grade, 1.20 m long bend to shape required, angle/shape with and including necessary clamps, nuts, bolts & washers of suitable size and including two coats of aluminium paint over a base coat of red oxide primer complete all as specified and directed
70	Supply and fix loopin loopout fuse junction box of size 205 x 255 x 112mm made out of thermo plastic Polycarbonate with IP 66/67 weather proof for outdoor installation (with knockouts of cable entry) protection with terminals and locking screw fitted with 5 Amps fuse cutout-01 No with 6A MCB, suitable for cable size 10 sqmm and fixingon steel tubular pole at a height not less than 1.5m above ground levelwith the help of clamps two nos of F1 20 x 3 mm and suitable nuts and bolts compelete all as specified and directed.
71	Supply and fixing 60 W LEDNew generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high powerLED as light source and electronic driver suitable for pole dia up to 40 mm complete all as specified and directed.
72	M&L for installation, commissioning & testing of LT panel board (Main Panel), CPRI approved, outdoor type fabricated out of 3.15 mm thick CRCA Sheet, dust and vermin proof, totally enclosed metal clad, double doortype accessible from front and rear side both with locking arrangement 3 phase 1.5 Sqmm sigle core copper wire system at AC 440 V, 50 HZ with colour coded aluminium bus bar of rated current capacity 200 Amp complete applied with two coats of synthetic enamelledpaint over a coat of anti corrosion primer and mounted on angle iron of size 50x50x6 mm grouted in PCC foundation including earth work and excavation complete suitable to accommodate the following accessories : - Supply and fabricated LT distrubution panel board with 3.15 mm thick CRCA sheet Aluminium busbar 4 strip with Coloured R,Y,B & Neutral of size (32x6) mm. Angle iron for frame work of size 50x50x6mm thick for panel mounting INCOMING MCCB Four pole MCCB 63 Amp, 50Hz 415 Volts with repturing capacity 16 KA- 01 Nos OUTGOING MCCB Four pole MCCB 40 Amp, 50Hz 415 Volts with repturing capacity 10 KA- 01 Nos MCB, TPN, 20 Amp - 01 No. MCB, TPN, 10 Amp - 01 No. Indicator LED Lamp R.Y.B Digital Voltmeter 0-500 volt with selector switch Digital Ammeter 0-400 Amp with suitable CTs Star Delta starter fully automatic as per suitable capacity of submersible motor 17.5 HP alongwith three phase and over load protection relay & single phase preventor. NOTE : Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No extra payment will be made.
73	M&L for installation, commissioning & testing of LT panel board (Main Panel), CPRI approved, outdoor type fabricated out of 3.15 mm thick CRCA Sheet, dust and vermin proof, totally enclosed metal clad, double doortype accessible from front and rear side both with locking arrangement 3 phase 1.5 Sqmm sigle core copper wire system at AC 440 V, 50 HZ with colour coded aluminium bus bar of rated current capacity 200 Amp complete applied with two coats of synthetic enamelledpaint over a coat of anti corrosion primer and mounted on angle iron of size 50x50x6 mm grouted in PCC foundation including earth work and excavation complete suitable to accommodate the following accessories : - Supply and fabricated LT distrubution panel board with 3.15 mm thick CRCA sheet Aluminium busbar 4 strip with Coloured R,Y,B & Neutral of size (32x6) mm. Angle iron for frame work of size 50x50x6mm thick for panel mounting INCOMING MCCB Four pole MCCB 50 Amp, 50Hz 415 Volts with repturing capacity 16 KA- 01 Nos OUTGOING MCCB Four pole MCCB 25 Amp, 50Hz 415 Volts with repturing capacity 10 KA- 01 Nos MCB, TPN, 16 Amp - 01 No. MCB, TPN, 10 Amp - 01 No. Indicator LED Lamp R.Y.B Digital Voltmeter 0-500 volt with selector switch Digital Ammeter 0-400 Amp with suitable CTs Star Delta starter fully automatic as per suitable capacity of submersible motor 17.5 HP alongwith three phase and over load protection relay & single phase preventor. NOTE : Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No extra payment will be made.
74	Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. (EE=28, DG Set=4) Note:Measurement shall be taken only after punning down sand cushioning.
75	Material and labour for dry bricks of sub class B (old size) desgination 75 laid perpendicular to axis of cable in trenches for cable protection of cable with width equal to length of brick complete all as specified and directed. (EE=2500, DG Set=320)
76	Supply and fixing PVC insulated unsheathed, FRLS, copper conductor strainded cable 1.5 Sqmm, 3 core for connection from junction box to street light fitting complete all as specified and directed.
77	INTERNAL ELECTRIFICATION WORKS
78	Material and Labour for point wiring complete withPVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including medium PVC conduit of suitable size (as per conductor run) with all fittings and accessories concealed in wall and ceiling portion inculding concealed sunk in pressed steel terminal boxes of not less than 2mm thick required size factory made and painted with synthetic enamel paint black paint with including top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washers with and including 1.5 sqmm FRLS multi stranded copper conductor as continuous earth wire drawn in same concealed conduit, connected to main earth and earth dolly including cutting chases and making good as per existing specification for One Light / fan / exhaust fan point controlled by one way switch 5Amp complete all as specified and directed.
79	Material and Labour for point wiring complete withPVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including Medium PVC conduit of suitable size (as per conductor run) with all fittings and accessories concealed in wall and ceiling portion inculding concealed sunk in pressed steel terminal boxes of not less than 2mm thick required size factory made and painted with synthetic enamel paint black paint with including top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washers with and including 1.5 sqmm FRLS multi stranded copper conductor as continuous earth wire drawn in same concealed conduit, connected to main earth and earth dolly including cutting chases and making good as per existing specification for One three pin 5Amp switch socket outlet point on independent board complete all as specified and directed.
80	Material and Labour for point wiring complete withPVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 2.5 Sq mm (Nominal area) drawn through and including Medium PVC conduit of suitable size (as per conductor run) with all fittings and accessories concealed in wall and ceiling portion inculding concealed sunk in pressed steel terminal boxes of not less than 2mm thick required size factory made and painted with synthetic enamel paint black paint with including top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washers with and including 1.5 sqmm FRLS multi stranded copper conductor as continuous earth wire drawn in same concealed conduit, connected to main earth and earth dolly including cutting chases and making good as per existing specification for One six pin socket outlet two in one 6/16 Amp point on independent board complete all as specified and directed.
81	Supply and fixing ceiling fans complete with blades, down rods with accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) and all accessories and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
82	Supply and fixingexhaust fan made of sturdy engineering plastic body complete with louvers shutter including mounting frame, voltage 230V, 50 Hz, 1200 RPM, 36 watt, light duty, copper winding of sweep 250mm and all accessories and including connecting up with 1.50 sqmm three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
83	M&L for Earthing complete with galvinised steel earthplate electrode 60 cm x 60cm x 6mm thickburied directly in ground (earth pit notless than2.25 mtr deep belownormal groundlevel)with top edgeof platenot less than1.5 mtr belownormal ground level , connectingto galvanised iron wire 4mm dia, protected by galvanised iron light grade pipe 15mm dia and galvanised iron water pipe medium grade 20mm dia upto 7.5 mtr including provnof concretepit inPCC (1:4:8) type D-2 using 40 mm graded stone aggregates, coping shall be PCC 1:3:6 type C1 using 20 mm graded stone aggregate, top cover 50mm thick of RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bars @80mm c/c both ways with angle iron frame, pit shall be given 15mm thick plaster in CM 1:4 , funnel with wire gauge (0.68mm) and charcoal dust and common salt all as in shown in electrical plate No-03 of MES SSR Pt-I and specified and including all excavation and earth work and connecting the earthing complete all as specified and directed Note: The unit quoted rate of earthing shall be deemed to included cost of 7.5 M long GI earth wire 4mm dia and protection pipe GI 15 mm dia light grade, GI 20mm dia medium grade watering pipe. Any variation in length shall be adjusted through deviation order.
84	Supply and fixing LED ligth fittings 1x 20w, 220 Volt , AC, decorative box type with driver, surface/pendent mounting type with white reflector cover fitted to the body including LED Tube rod connecting up with and including three core flexible cable conductore cable of suitable size from ceiling rose completeall as specified and directed.
85	Supply and fixing LED building security light with pressure die cast aluminum housing with polycarbonate cover, finless design, dedicated peanut optics, > 100 lumen/W system efficiency, minimum 2500 system lumens, 45W system wattage (including driver), color temperature > 5700K, CRI>80, IP65 protection, IK07 ratingincluding 25mmbore GI pipe light grade of 1.5 meter long bend pipe (bend at 120°) with and including 40 x 6mm FI clamps and fixing accessories etc.The potted electronic driver with THD<10%, PF>0.95, LED fitting is complete all as per OEM specified and directed. LED driver and housing is of same make as of light fitting. All type of testing for photometry, electrical and electronic parameters is done in BABI approved lab complete all as specified and directed
86	Supply and fixing MCB SP 240 Volt, 50Hz , 10 KA, "C" series of rating06 to 32 Amp confirming to IS/IEC-60898-1 & IS/IEC-60947-2 completeall as specified and directed.
87	Supply and fixing MCB SPN 240 Volt, 50Hz , 10 KA, "C" series of rating32 Amp confirming to IS/IEC-60898-1 & IS/IEC-60947-2 completeall as specified and directed.