Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Tender For Mtps I Tm Unit Ii Cleaning And Hydraulic Testing Of Lub Oil Coolers And Working Oil Coolers Dismantling Cleaning And Assembling Of Suction Strainers Of Bfps And Ceps Renewal Of Bfp Leak Off Line And Suction Discharge Flange Gaskets Inspec. Submission Date for this Tender is 18-09-2023. Dismantling Work Tenders in mettur Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Inspection and Hydraulic Testing ofBFP Lub Oil Cooler/Working oil coolers assembly: Disconnecting the Lub oil and Working Oil lines from the Cooler after draining the sump oil, dismantling the water boxes, separation of tube nest from the cooler and cleaning the inner surface of shells, tube nest and conducting the hydraulic test to the rated pressure, reconditioning of shell outer surface by welding if necessary, plugging the tubes if puncture deducted and reassembling of cooler and the connected parts with the renewed gaskets & ‘O’ rings. |
| 2 | Inspection & cleaning of CEP strainer: Loosening of all the strainer cover flange bolts & nuts, lifting and removing the strainer cover, removing the CEP strainer from the strainer assembly, inspection and reconditioning the damaged strainer if necessary, cleaning the strainer, cleaning inside the strainer well and removing the old gasket from the lid closing area, assembling the strainer basket in the well and assembling the CEP strainer assembly with renewed gasket and painting of the strainer outer area.(Paints under contractor scope) |
| 3 | Renewal of gaskets:- Disconnecting the Balancing leak-off line, suction & discharge flanges of BFP, Removing the old gaskets and cleaning the flange surfaces, reassembling the leak-off, suction and discharge flanges with renewed gaskets, renewal of worn out cooling water line & oil line valves including cutting and welding works if required, renewal of worn out flanges & view glass arrangements and checking for any leakages before commissioning and attending the defects. |
| 4 | Cleaning and painting:- Cleaning and painting of all the Oil Lines and Cooling Water lines of Boiler Feed Pump with different colors of Heat Resistant paints.(Paint under contractor scope). |
| 5 | Inspection & cleaning of BFBP strainer: Dismantling the strainer lid assembly and removing the BFBP strainer basket from the strainer assembly, inspection and renewing the damaged strainers if necessary, cleaning the strainers and reassembling the basket, cleaning inside the strainer well and removing the old gasket from the lid closing area, assembling the strainer basket in the well and assembling the BFBP strainer assembly with renewed gasket. |
| 6 | Overhauling of BFP mechanical Seal coolerDismantling the Mechanical Seal Cooler connected pipe lines removing and dismantling of mechanical seal cooler & removing the existing cylindrical portion and coil from the cooler. |
| 7 | Cleaning the outer portion of coils by wire brush preparation of gaskets for all flanges assembling and resuming pipe line connections and erection of mechanical seal cooler. painting the inner and outer side of the mechanical seal cooler shell and connected pipe lines. |
| 8 | Overhauling of SRV’s for BFBPs:- Removing the safety Relief valveSize 4’’, 2.5’’/ 300 Class from Suction line Boiler Feed Booster Pumps is assembling the Safety ReliefValve, cleaning all the parts of the SRV, checking the seating surfaces and Lapping theseat and disc for perfect blue matching. Settingthe pressure for ratedlifting the SRV with hydraulic pump. Reassembling the SRV with new inlet and outlet flange gaskets. |
| 9 | Flanges Gasket renewal works50NB Flanges Gasket renewal works in BFP Cooling water jackets inlet and outlet line flanges. |
| 10 | Renewal of worn out drain and Vent lines in BFP,BP,CEPs:Labour charges for IBR welding for cutting and welding of GLV 1"/1500/2500 class valves AS or equivalent joints by IBR welder. |
| 11 | Overhauling of Lub Oil Cooler “Y” Strainer Cooling water inlet & Outlet line valves:- Dismantling the valve, cleaning all the parts, checking the seating surfaces of Gate/seat. Lapping the seating surfaces of gate/ seat for perfect blue matching.Reassembling the valve with new gland packing rings and bonnet gaskets without any leak. |
| 12 | Heat Resistant paints. |
| 13 | Bolt & Nut |
| 14 | welding electrodes E-9018 |
| 15 | Non-Mettalic Gasket :Size : 2000 X 1500 X 3 mm thick, withstand Temperature up to 600Deg.C & Pressure : 160 Kg/cm² |
| 16 | Charges for Consumables and T&P’s item Sl.No:1 to 11 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
