Military Engineer Services-MES has published Tender For Repairs / Replacement Of Certain Wooden / Steel And Aluminium Joinery / Cupboards / False Ceiling / Panelling And Hardware Fittings In Airmen And Sncos Billets / Fcm Complex In Tech Area At Afa Hyderabad. Submission Date for this Tender is 18-09-2023. Railway Ancillaries Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Sep-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-09-2023 |
| Sl. No. | Item Description |
| 1 | Taking down shutters n.exc 1 sqmeach complete all as directed. |
| 2 | Taking down shutters exc 1 sqm but n.exc 2 sqmeachcomplete all as directed. |
| 3 | Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description (without taking off shutters from the frame) complete all as directed |
| 4 | Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description (without taking off shutters from the frame) complete all as directed |
| 5 | Taking down shutters exc 1 sqm but not exc 2 sqmeachand re-fixing in same opening after reapirs and resize complete all as directed. |
| 6 | S&F 35 mm thicksecond class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated |
| 7 | S&F of factory made 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 8 | S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 9 | S & F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed. |
| 10 | S & F factory made solid PVCdoor shutter 30 mm thick (style) consisting of frame made out of M S tubes for top and bottom rails. M S frame shall be covered with heat moulded PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both side PrelamPVC sheets used instead of Plain colour PVC sheet for top rail, lock rail & bottom rail, panelling of both side PrelamPVC sheets used instead of Plain colour PVC sheet to be fitted in the M S frame welded/sealed to the stiles & rails feathered at edges with suitable PVC sheet beading, and jointed to gether with solvent cement complete all as specifid and as directed. |
| 11 | S & F ofstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 12 | S & F in repairstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 13 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makefixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, complete all as specified and as directed. |
| 14 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making openabled/sliding/fixed for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket and necessary Builder hardwares required for functioning etc, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make , fixing with dash fasteners of required dia and size, including necessary fittings, stays, locking arrangement, rooler etc filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed.(Note :-weight of aluminium material will be considered for payment purposed.) |
| 15 | S & F for powder coating of any colour (Thickness or powder coating notess than 50 micron).aluminium grillanodised transparent or dyed to required shade with minimum anodic coating of grade AC 15) of approveddesign/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
| 16 | S & F 12mm thickprelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminationin aluminium doors/partition complete all as specified and directed |
| 17 | Dismantling wall and ceiling boards (fibre, pulp,insulation,etc) or insulation boards/slabs/blankets, any thickness,including cover fillets/scantling and uframed work etc of any description any type complete all as specified and as directed |
| 18 | M & Lfor seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drillingand tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to theintermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long includingthin layer of Pop with Gypsum binder,sanding the surfaces till smooth surface is obtained and finally applying two coats of acrylic emulsion over one coat primer over 3 mm thick putty complete all as specified and as directed. |
| 19 | Supply and fix only Armstrong false Ceiling Classic Lite 600x600x16mm, NRC-0.55,including grid of size main tee 32x24mm @1200 c/c cross Tee of 1200mm of size 27x24 mm and cross Tee of 600mm of size 25x24 mm and wall angle of size 19x19mm and fixed all around the wall to form a grid of size600x600. Tiles shall be inserted in the formed grid and suspended with 2mm GI wire at every 1200 mm intervals C/C complete all as specified and as directed. |
| 20 | Supply and fixin repairs only Armstrong Ceiling Classic Lite 600 mm x 600 mm x 16 mm, NRC-0.55, grid size main tee 32x24mm boards including taking down old ceiling boards complete all as specified and as directed. |
| 21 | S & F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per sepcification and drawing complete all as specified and as directed. |
| 22 | S & F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and necessosary joining beading and other fitting and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 23 | S & F 5 mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed. |
| 24 | M&Lfor 18 mm thick plywood of grade (BWP), type BB fixed with nails as in cup boards / Almirah Shutters complete all as specified and as directed. |
| 25 | M & L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured andpattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed. |
| 26 | M & L forBrass handles, cast type, polished bright 150 mm long complete all as specified and as directed. |
| 27 | S&F Brass Locks cupboard grade I,size 50 mm brass 4 levers complete all as specified and as directed. |
| 28 | S&F in repair Continuous (piano) hinges, brass width of flap 30mm bright finish or electro galvanised complete all as specified and as directed. |
| 29 | M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 30 | Supply and fix in repairs plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip/glass putty in aluminum window/ms windows shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 31 | Supply and fix in repairs figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 32 | S & F for 5.50 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 33 | M & L for taking down existing aluminium doors, resecuring or easing & adjusting and refixing in same opening after necessary repairs for smooth functioningof any description exc 1 sqm but not2.5 Sqm eachcomplete all as specified and as directed. |
| 34 | S&F of 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plateetc complete all as specified and as directed. |
| 35 | S & Fin repair 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 36 | S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 37 | S & F in repair75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 38 | S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed. |
| 39 | S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed. |
| 40 | S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed. |
| 41 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 42 | S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 43 | S&F of Aluminium anodised,barrel tower bolts of extruded section of size 150mm long etc complete all as specified and as directed. |
| 44 | S&F in repair of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed. |
| 45 | S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.. |
| 46 | S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 150 mm long etc complete all as specified and as directed. |
| 47 | S&F in repair40 mm dia, cup board knobs fixed with nut, screw and washer of brass polished etc complete all as specified and as directed. |
| 48 | S & F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified. |
| 49 | S&F in repairFancy type curtain rod 20 mm dia with fixing brackets etc complete all as specified and as directed. |
| 50 | S&F in repairFancy typecurtain rod 25 mm dia with fixing brackets etc complete all as specified and as directed. |
| 51 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140 mm size fixed in floor complete all as specified and as directed |
| 52 | S&F in repairs floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140 mm size fixed in floor complete all as specified and as directed |
| 53 | S&FMortice lock, of brass 4 leversvertical type of size 100 mm etc complete all as specified and as directed. |
| 54 | S&F in repair of Mortice lock, of brass 4 leversvertical type of size 100 mm etc complete all as specified and as directed. |
| 55 | S & F door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed. |
| 56 | S & Fin repairs door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed. |
| 57 | S&F in repair for toughened glass door bottom lock fittings made of stainless steel complete all as specified and as directed |
| 58 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 59 | Labour only forsecurely tying / tightening the loosebird proofingnet with required GI / PVC / Nylon wire for securing as required at a height upto 10 m from the FFLat various locations in technical area complete all as specified and as directed. Note : The work shall be executed upto 12 mtrs height from GL.The contractor should make his own arrangement for machnical equipments like boom lift/crane and/or steel scaffolding for tying the bird proofing net.The contractorshould take ocare of all necessary precautionary safety measure while doing the work. The rate quoted by the tenderer is deemed to be inclusive of the same and no claim whatsover on this account is admissible. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
