External Plaster Using Ready Mixed Cement Mortar Providing And Applying External Plaster Using Ready Mixed Cement Mortar Plaster Of Approved Make And As Specified I ) Carefully Dismantling, Manually, The Existing Loose / Damaged / Cracked Plaster Of Any Thickness, Upto Brick / Concrete Surface From The External / Internal Common Area Surfaces Of Walls / Chajjas / Columns / At Any Levels / Floors, Etc. 2 2 Repairs To Rcc Members Carrying Out Treatment To Deteriorated Concrete / Corroded / Damaged Reinforcement And Replacing The Damaged Concrete Surface With Polymer Modified Cement Mortar As Specified Below : I ) Carefully Dismantling And Removing The Loose / Damaged Patch Concrete, Manually, To Expose The Surface Of The Intact Concrete And Corroded Reinforcement Bars, If Appears, Using Necessary Tools, Thoroughly Cleaning The Exposed Surface Of The Concrete & Reinforcement / S Using Wire Brush With Clean Water. 3 3 Same As Item No.2 Above But Polymer Mortar Of Additional Thickness Of 12 Mm To 20 Mm Mm Providing / Applying Additional Polymer Modified Cement Layer On The Surface Of 12Mm To 20 Mm Thick Mortar Over The Treated Surface Under Item No.2 Above, All Complete Done In Workmanlike Manner As Directed By The Banks Engineer Only Average Elevated Area Shall Be Considered For Measurement. 4 4 Chajja Waterproofing Removing Of Existing Loose Plaster Layer Of Entire Thickness Till The Top Of Brick Bat Coba / Concrete Using Chisel And Hammer, Cleaning The Surface Thoroughly, Disposing The Debris Out Of The Bank?S Premises, Redoing The Waterproofing Of Chajja By Applying Water Proof Coating In Two Coats Of Approved Make On The Brick Bat Surface And Providing And Laying Minimum 20 Mm Thick And In Proper Gradient Ready Mixed Cement Plaster 5 5 External Water Proof Paint I ) Surface Preparation : The Existing Surface Shall Be Thoroughly Cleaned Of All Laitance, Loose Material, Oil Grease Etc. By Wire Brush. Treat All Surface Cracks By Opening It In V? Groove Shape By Mechanical Means. Providing And Filling The Cracks Up To 5 Mm Width With Approved Make Ready To Use Elastomeric Sealant Of Approved Make. Cracks More Than 5 Mm And All Separation Gaps Such As At Window Jambs Lining Of Granite & Plastered Surface Shall Also Be Filled Using Approved Crack Sealants 6 6 Synthetic Enamel Paint On Woodwork Carefully Removing Loose Scales, Preparing The Surface Using Sandpapers, Applying A Layer Of Approved Putty To Get Smooth And Even Surface On Entire Wooden Surface Complete As Directed For Wooden Joineries Such As Doors, Windows, Ventilators, Balcony Wooden Railings Etc. Providing And Applying 2 Or More Coats Of 1St Quality Synthetic Enamel Paint ( Glossy ) Of Approved Make And Shade Over A Coat Of Suitable Wood Primer Of Approved Make On All Exposed Wood Work. 7 7 Oil Bound Distemper Providing And Applying One Coat Of Approved Cement Primer And Two Or More Coats Of Oil Bound Acrylic Distemper Of Approved Manufacture And Shade As Per Manufacturer Specifications Applied On The Interior Surfaces Of Fire Escape / Common Staircase Ceilings, Walls, Soffits, Columns, Etc. Surface Preparation By Scrapping The Old Paint Surface Using Sand Paper, Filling The Cracks / Depression With Putty, Cleaning Of The Stains From Floors, Carting Away The Debris, Etc. Complete As Directed. 8 8 French Polishing On Doors Providing And Applying Fresh Polish In Required Number Of Coats Of Approved Tint For Doors Shutters, Etc. Including Surface Preparation By Scrapping The Existing Surface With Sand Paper To The Satisfaction Of Banks Engineer, Filling Of Wax In Cracks And Whenever Required, Levelling And Applying The Polish Uniformly To Give Even And Smooth Uniform Surface, Cleaning The Stains, From The Surrounding, Taking All The Care For Avoiding Staining The Surrounding Area, Etc. Complete. 9 9 Epoxy Paint On Steel Surface Providing And Applying One Coat Of Zinc Chromate Metal Primer And Two Or More Coats Of 1St Quality Epoxy Paint Of Approved Shade To Steel Surfaces, Viz. Grills, Gates, Compound Wall Grills, Weld Mesh, Rolling Shutters, Collapsible Gate, Etc. At Any Height Including Surface Preparation By Scrapping Thoroughly With Approved Size Sand Paper, Filling Metal Putty Of Approved Make, Cleaning, Carting Away The Debris Out Of The Premises, Etc., Complete As Directed. 10 10 Painting To Miscellaneous Items Providing And Applying 1 Coat Of Suitable Primer As Per The Parent Surface And 2 Or More Coats Of Synthetic Enamel Paint / Flat Oil Paint / Elastomeric Paint As Required On Various Miscellaneous Exposed Items Like External Service / Waste Lines G.I / C.I. / Pvc Pipes, With Brackets, Bund Walls In Gardens, Sets Of Electrical Switch Boards And Meter Boards 11 11 Ms Staging With Platform Over The Road Providing And Erecting Strong And Stable Ms Staging Of Directed Height ( Only At Gf Level ) Spanning To The Entire Width Of The Road By Using Combination Of Various Ms Structural Members Like Ismb, Ismc 150 / 200 For Joist Beams, Columns, Etc 12 12 Cgst Enter Total Cgst 13 13 Sgst Enter Total Sgst
