Orissa Industrial Infrastructure Development Corporation-IDCO has published Tender For Supply Installation Testing And Commissioning Of Stage Light Stage Drapery And Audio Visual System With Provision For Operation And Comprehensive Amc For 05 Years For Auditorium Of Kalamandal Bhubaneswar. Submission Date for this Tender is 23-08-2023. Audio Video Equipment Tenders in bhubaneswar Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Aug-2023 | DATE CORRIGENDUM | Date | 23-08-2023 |
| Sl. No. | Item Description |
| 1 | (A) STAGE LIGHT |
| 2 | (1) SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature,CRI & TLCI Values above 95 COB LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 35° Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for TV & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for genuine product |
| 3 | (2) SITC of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing ,Manual Focus with 4 Beam shaping cutters, Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 |
| 4 | (3)SITC of 300W LED Profile Spot 26 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing ,Manual Focus with 4 Beam shaping cutters, Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body |
| 5 | Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product |
| 6 | (4) SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided)DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 Degree,Total Power Consumption of 420W 11.7KHz Refresh Rate,In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX,High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified |
| 7 | Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 LM79 Certificates from NABL Accredited laboratory. CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 |
| 8 | (5) SITC of 200W LED Fresnel Light having COB LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel Lens CRI,TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 210W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60HZ Working Temperature - +40° ~ -30° Active Cooling with Low Noise Fan DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin xlr Black powder coated fabricatedhousing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for genuine product. |
| 9 | (6)SITC of 250W LED RGBW Spot light , Beam Angle 15° complete withLED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided DmX 512 dimming High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming, Data DmX through 3 / 5 Pin XLRs Power In and Out Connections High-precision colors, IP20 protection Powder coated Black finish housing Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-cast Aluminium body. RDM Control options with the latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for the genuine product |
| 10 | (7) SITC of 200W High Quality LED PC Light complete with, COB Lamp source 3200K CCT Colour temperature COB LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided)CRI & TLCI Values above 95 DmX 512 dimming with 5 channel control Motorised Zoom Beam angle variable from 14 Degree to 45 Degree Total Power Consumption of 210W High quality output replacing 1000W Halogen PC Light Flicker Free 100% for Tv & Film Cameras |
| 11 | 11.7KHz Refresh Rate Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 LM79 Certificates from NABL Accredited laboratory. CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embossed impact on the light body for genuine product |
| 12 | (8) SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) Having CRI TLCI Values above 95 High precision steady color No heat, DmX 512 dimming with 2 Channel Beam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coatedBlack finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR’s Total Power Consumption of 180W |
| 13 | Sound Active Mode Control IP20 protection. 65dB ~ 130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product |
| 14 | (9) SITC of 300W LED RGBWAL 18° to 38° Zoom Profile Spot Light complete with, COB LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) 3000K ~ 8000K Colour Temperature Rotary, Key, DMX control of dimmer Strobe option Adjustable 1 ~ 25 times / Sec RDM, DMX, Master-slave control mode 4 Kinds of dimming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Intelligent temperature control Flicker free with selectable PWM Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1/4/6/10 DMX Channel Control modes IP20 protection, suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) |
| 15 | Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for genuine product |
| 16 | (10) SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady color No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coatedBlack finish housing Rigidly built pressure die-casted Aluminium body LED Easy view displayData DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out ConnectionsTotal Power Consumption of 180WSound Active Mode Control.IP20 protection. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for genuine product |
| 17 | (11) SITC of 300W LED Cyclorama Wash Light with LED source from Citizen / Osram / Cree / Nichia / Lumiled (LM80 to be provided) 60 Degree or better beam spread 48 LED Emmitters having RGB Source Seamless CCT Tuning from 3000K ~ 7000K R,G,B + WW direct access through knobs for manual operation 10 Presets for CCT Selection Luxeon LED High Lumens per watt |
| 18 | RGB Colour mixing and presets control Asymmetric Reflector on LED"s Uniform Spread with RGB LED control 14+ DmX Channel operation Barndoor arrangement for Light spill control Nuetrick Power loop in and Out230V AC Input power along with Fuse protection No Noise 0 dB operation RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Accredited laboratory. Brand embossed impact on the light body for genuine product/ |
| 19 | (12) SITC of Multi purpose Hybrid type Moving Head Beam / Spot and Wash effect light High bright long throw Lamp source 380W R18 Lamp 1 Colour Wheels – 11 Colours + Open 19/24 Channel DmX Control Moto Dual Prism Mode Beam 3.5°, Spot 25°, Wash 50° BSW Mode Motorized Focus and Frost, 1 Static Gobo Wheel – 14 Fixed Metal Gobos High Bright Daylight 6500K Open 7 Interchangeable Glass Gobos + Open Master Slave, Test Modes, 8 Bit/ 16 Bit High Precision Movement Sound Active and Auto Run Mode, Pan Angle 540°,Tilt Angle 270°. DmX control through 5 Pin XLR’s, IP20 rated product. |
| 20 | (13) 750WProfile Light (19Degree) : Multiple Facet Dichroic Unique Reflector, Porcelain High quality lamp base suitable for G9.5, Luminaire provided with gel holder, Gobo holding. Specification: Die cast Aluminium body, with HPL lamp. To include mounting accessories but without lamp. |
| 21 | (14) 750WProfile Light (26Degree) : Multiple Facet Dichroic Unique Reflector, Porcelain High quality lamp base suitable for G9.5, Luminaire provided with gel holder, Gobo holding. Specification: Die cast Aluminium body, with HPL lamp. To include mounting accessories but without lamp. |
| 22 | (15) 750 W Halogen Zoom Profile Spot 15 ~ 30 Degree HPL Ellipsodial Lamp : Luminaire provided with gel holder, Gobo holding. Specification: Die cast Aluminium body, with HPL lamp. To include mounting accessories with required lamp. |
| 23 | (16) 1000W spun aluminium PARCAN made up of cylindricalconstructionprovided with natural ventilation and floating ceramic GX16d base lamp socket,Yoke made ofMS flat 25 x 3mm, spigot with 28mm and filter frame but without lamp. |
| 24 | (17) Halogen Lamp HPL 3200K with G9.5 Base 750W suitable for Profiles and Zoom profile PC based fixtures. |
| 25 | (18) Halogen Lamp 3200K `with Gx9.5 Base 1000W suitable for Halogen fresnel spot lights. |
| 26 | (19) SITC of Light fixture mounting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die cast MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD |
| 27 | (20) SITC of Light Fixture dual safetyChain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleeve on the rope. Carabiner Clip |
| 28 | (21) SITC of Suspender cum clamps designed made out of MS material150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. |
| 29 | (22) SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatmentto keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint |
| 30 | (23) SITC of Motorised integrated fly bar/winch of 18Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. This mechanism shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System |
| 31 | to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. DmX / Manual smart working functionality Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. |
| 32 | (24) SITC of Motorised integrated fly bar/winch of 16 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanism shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel.DmX / Manual smart working functionality Dual barrel duly powder coatedMade using 40NBdual |
| 33 | construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. |
| 34 | (25) SITC of Motorised integrated fly bar/winch of 15 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. This mechanism shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. DmX / Manual smart working functionality Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. |
| 35 | Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. |
| 36 | (26) SITC of Motorised integrated fly bar/winch of 14 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. DmX / Manual smart working functionality Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Specially designed compact gear box |
| 37 | 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. |
| 38 | (27) SITC of Motorised integrated fly bar/winch of 13 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. DmX / Manual smart working functianailty Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. |
| 39 | (28) SITC of Motorised integrated fly bar/winch of 11 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. This mechanism shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. DmX / Manual smart working functionality Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system. |
| 40 | (29) SITC of Motorised integrated Utility fly bar/winch of 28 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90. |
| 41 | It shall have an drive unit base frame to fix the gear box whichcontains one shaft.415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functionality Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Wifi based up down ligh tbar movement Specially designed compact gear box3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum.Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller,Safe working load of 200Kg. Cable management system. |
| 42 | (30) SITC of Motorised integrated Utility fly bar/winch of 24 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functionality Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Wifi based up down light bar |
| 43 | movement Specially designed compact gear box3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum.Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller,Safe working load of 200Kg. Cable management system. |
| 44 | (31) SITC of Fixed off stage side 3/4 SIDE ladder as per the design, With an Mild Steel 40NB 48 OD black matt finish. Size of 600mm x 2500mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Powder coated with Matt black Texture Suspenders as per site conditions Round pipe welded to create frame Material for the light bar shall be of Mild Steel Pipe. Ladder Length shall be of customized type as per site condition. |
| 45 | (32) SITC of Fixed FOH Lighting bar/winch of 8Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal Bore |
| 46 | Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures |
| 47 | (33) SITC of Fixed FOH Lighting bar/winch of 27Mtr length constructed with an dual construction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar. It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fasteners of 10mm which can take an total load of 400KG each fastener. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures |
| 48 | (34) SITC of Flat Cable Wire harness required to provide the input power to the sockets on the hoists connecting between grid level circuit box to on hoist circuit box with below specifications: FRLS Multi core Copper cable 18 Cores of Power each with 2.5 Sq. mm copper wires insulated with high insulated material 2 DmX 5 core cables with low noise Width of the flat cable 120mm approx. Clips at each bending of the cable to act as retractor unit Long life, no breakage, smooth folding |
| 49 | (35) SITC of Power Distribution Electrical panel having a Incomer of 400A. Floor mount / rack mount / wall mount. Miniature circuit breakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures. Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130 All welding slag grounded off and welding pits wiped smooth with plumber metal. Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius. Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Neutral separation made using incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 222 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Terminal for both incoming and outgoing cable shall be |
| 50 | suitable for 1100 volts grade, aluminium/copper conductor PVC insulated and sheathed, armoured cable and shall be suitable for connections. Provided with ivory connectors for the internal terminations and external outgoing connecting points Custom built as per specification and project requirement. |
| 51 | (36) SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Rawl plug arrangement for wall / floor fixing |
| 52 | (37) SITC of Power junction box 1way made up of MS Sheet metal fabricated housing black powder coated, fibre glands of suitable size fitted with CEE connector Box 16A |
| 53 | (38) SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Mouldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing |
| 54 | (39) SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing |
| 55 | (40) SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing |
| 56 | (41) SITC of Dimmer Pack Rack mount having 12 nos of Channels Low Noise – Active Cooling system Inbuilt Thermal Sensors 50 ~ 100% Overload protection Each Channel control for Dimming / Switch Mode Channel Control Wattage from 2500W ~ 5000W Individual MCB Protection for each channel 10A/20A Internal Temperature monitoring & Safety device Sleek and Unique Designed Light body Flash Toggle Switches on each channel High quality power Ivory interface Address Setting through Press Switches |
| 57 | (42) SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint.High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding.Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing |
| 58 | (43) SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardware |
| 59 | (44) SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 300 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid. |
| 60 | (45)SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dissipation provided with lid |
| 61 | (46)SITC of DmX Male Female Connectors 5 Pin having rubber sheath protection for Cross connecting DmX wiring connections |
| 62 | (47) SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal de-framing |
| 63 | (48) SITC of DMX lighting controller control Up to 2048 fixtures, including LED, Moving Lights and conventionals. 24 multi-function faders,User Definable Keys, 241 playbacks, 240 groups, 4 x 240 Palettes, |
| 64 | Store single or multiple cues on each of the playbacks, Art-Net 4, SACN and CITP, 7” multi-touch screen, Automatic Groups, Palettes, Effects and Macros, Colour mixing, picking & image picker, 2048 Channels upgradable to 8192 Channels, Channels patchable across 64 Universes. |
| 65 | (49) SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8 Isolated outputs.Slow blow safety fuse 5 Pin XLR for output interface Dual mode to select 2 universe operation DmX Input through 5 Pin XLR Connector Control Protocol RDM and DMX 512 Powder coated compartment finish Mounting brackets for grid mount. |
| 66 | (50) SITC of 222-way Power Marshalling Box made up of MS Sheet metal fabricated housing black powder coated and ivory connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size. |
| 67 | (51) SITC of Auxilliary Marshalling Box, made up of MS Sheet metal fabricated housing black powder coated and ivory connectors for the internal terminations and external outgoing connecting points, fibre glands of suitable size. |
| 68 | (52) SITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 10Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indicator and necessary meters operated wireless smart working functionality or the motorised light bars should be there with one neutral & phase connection slots and with 2 virtual load terminals. For each motor unit one each |
| 69 | switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features |
| 70 | (53) SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivory connectors, necessary glands etc |
| 71 | (54) SITC of FRLS Copper unarmoured Flexible cable IS694 having 12 Core each of 1.5 Sq mm size. |
| 72 | (55) SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size. |
| 73 | (56) SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 2.5 Sq mm size. |
| 74 | (57) SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. |
| 75 | (58) SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. |
| 76 | (59) SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signal. |
| 77 | (B) STAGE DRAPERY |
| 78 | (1) SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish, All the materials under gone through 7 tank process with, various chemical treatment to keep them rust free, Suitable to hold various type grid & other rigging systems. |
| 79 | (2) SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm,All the materials under gone through 7 tank process with various chemical treatmentto keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint. |
| 80 | (3) SITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 9 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indicator and necessary meters operated wireless smart working functionality for the motorised light bars should be there with one neutral & phase connection slots and with 2 virtual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features. |
| 81 | (4) SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivory connectors, necessary glands etc. |
| 82 | (5) SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. |
| 83 | (6)SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. |
| 84 | (7) SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Main Valance) Size: 44Mtr x 1.5Mtr. |
| 85 | (8) SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Main Curtain) Size: 44Mtr x 12Mtr. |
| 86 | (9) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Mid Curtain) Size: 29Mtr x 12 Mtr. |
| 87 | (10) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Rear Curtain1 ) Size: 30 Mtr x 12 Mtr. |
| 88 | (11) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Austrian Curtain1 ) Size: 31.5Mtr x 13 Mtr. |
| 89 | (12) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Austrian Curtain 2 ) Size: 29.5Mtr x 13 Mtr. |
| 90 | (13) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Austrian Curtain3 ) Size: 25.5Mtr x 13 Mtr. |
| 91 | (14) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trolleys (For Austrian Curtain4) Size: 23.5Mtr x 13 Mtr. |
| 92 | (15) SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing)12Mtr x 2Mtr. |
| 93 | (16) SITC of Motorised integratedValancefly bar/winch of 44 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. 415VAC Motor with Brake for Motor System to lift a load of180Kg as a safe working load which should be synchronized with Control Panel. |
| 94 | Wifi operated wireless smart working functionality Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Wifi based up down light bar movement Specially designed compact gear box3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum.Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller,Safe working load of 200Kg. Cable management system. |
| 95 | (17) SITC of Fixed Wing Structure designed as per site condition for a height approx 11.5 Mtr x 2Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. |
| 96 | (18) SITC of Motorized DMX operated Main Curtain 44 Mtrs straight, Centre partting as per design. This mechanism shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trolleys with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. |
| 97 | Motor Cable termination box Trolleys uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit,Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated. |
| 98 | (19) SITC of Motorized DMX operated Mid Curtain 29 Mtrs straight, Centre partting as per design. This mechanism shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trolleys with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. |
| 99 | Motor Cable termination box Trolleys uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit,Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated. |
| 100 | (20) SITC of Motorized DMX operated Rear Curtain 30 Mtrs straight, Centre partting as per design. This mechanism shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trolleys with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. |
| 101 | Motor Cable termination box Trolleys uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit,Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated. |
| 102 | (21) SITC of Motorized DMX operated vertical/AustrianCurtain 31.5 Mtrsas per design. This mechanism shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. Curtain design & mechanism to be such that the curtain & it"s mechanism to not take up more than 2.50m space above the proscenium level in its parked/raised position Curtain wire rope drops shall be at every 1200mm,Open and close limit controller,Drive unit with suitable capacity of motor unit,Wire Rope shall be of GI Wire ropes Min 5mm Dia Undergone through various chemical treatment to keep them rust free, Black texture finish paint. |
| 103 | (22) SITC of Motorized DMX operated vertical/AustrianCurtain 29.5 Mtrsas per design. This mechanism shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. Curtain design & mechanism to be such that the curtain & it"s mechanism to not take up more than 2.50m space above the proscenium level in its parked/raised position Curtain wire rope drops shall be at every 1200mm,Open and close limit controller,Drive unit with suitable capacity of motor unit,Wire Rope shall be of GI Wire ropes Min 5mm Dia Undergone through various chemical treatment to keep them rust free, Black texture finish paint. |
| 104 | (23) SITC of Motorized DMX operated vertical/AustrianCurtain 25.5 Mtrsas per design. This mechanism shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. Curtain design & mechanism to be such that the curtain & it"s mechanism to not take up more than 2.50m space above the proscenium level in its parked/raised position Curtain wire rope drops shall be at every 1200mm,Open and close limit controller,Drive unit with suitable capacity of motor unit,Wire Rope shall be of GI Wire ropes Min 5mm Dia Undergone through various chemical treatment to keep them rust free, Black texture finish paint. |
| 105 | (24) SITC of Motorized DMX operated vertical/AustrianCurtain 23.5 Mtrsas per design. This mechanism shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. |
| 106 | Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. Curtain design & mechanism to be such that the curtain & it"s mechanism to not take up more than 2.50m space above the proscenium level in its parked/raised position Curtain wire rope drops shall be at every 1200mm,Open and close limit controller,Drive unit with suitable capacity of motor unit,Wire Rope shall be of GI Wire ropes Min 5mm Dia Undergone through various chemical treatment to keep them rust free, Black texture finish paint. |
| 107 | (25) SITC of Motorised integrated fly up curtain / White Screen of 20 Mtr Width & 9 Mtr Height, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an WormReduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft. This mechanism shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. |
| 108 | Wifi operated wireless smart working functionality, Dual barrel duly powder coatedMade using 40NBdual construction. Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodology. Wifi based up down light bar movement Specially designed compact gear box 3phase AC motor with DC Brake 2HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum.Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller,Safe working load of 200Kg. Cable management system. |
| 109 | (C)AUDIO VISUAL SYSTEM |
| 110 | (I) AUDIO SYSTEM |
| 111 | (1) SITC of FOH-Left Line Array-Modular Bi-amplified Line Array modules with 10" to 12" LF driver , 2 x 1 " HF or better diver, Power Handling LF 400 W AES or more & HF 75 watts AESper cabinet or more , Frequency Response: 80Hz to 18kHz (+/- 3dB) , Sensitivity:LF: 98 dB-SPL ; HF113 dB-SPL or better ,Maximum SPL 133 dB Peak or more. Line array set should include minimum 5 nos of cabinets per hang and the total vertical coverage should be 50° or better Horizontal coverage of individual speaker should be selected as per long throw/mid/short throw application to ensure uniform coverage and to achieve high STI levels .It shall have Concealed Flying Hardwarewith wooden enclosure. Speaker should come with an option of any RAL paint colour as per site requirement complete as per tender specifications. |
| 112 | (2) SITC of FOH-Right Line Array- Modular Bi-amplified Line Array modules with 10" to 12" LF driver , 2 x 1 " HF or better diver, Power Handling LF 400 W AES or more & HF 75 watts AESper cabinet or more , Frequency Response: 80Hz to 18kHz (+/- 3dB) , Sensitivity:LF: 98 dB-SPL ; HF113 dB-SPL or better ,Maximum SPL 133 dB Peak or more. Line array set should include minimum 5 nos of cabinets per hang and the total vertical coverage should be 50° or better Horizontal coverage of individual speaker should be selected as per long throw/mid/short throw application to ensure uniform coverage and to achieve high STI levels .It shall have Concealed Flying Hardwarewith wooden enclosure. Speaker should come with an option of any RAL paint colour as per site requirement complete as per tender specifications. |
| 113 | (3) SITC of Flying Array Kit for Line Array Speakers. Country of Origin should not be china |
| 114 | (4) SITC of18" direct radiating subwoofer with power handling 450W AES or more @ 8 ohms, Frequency Response (+/-3dB) : 35 Hz to 120 Hz, Sensitivity: 97 dB or better,Maximum SPL 131 dB or more,wooden enclosure with built in hanging inserts. Speaker should come with an option of any RAL paint colour and should be designed and supplied with necessary hardware / hanging arrangement to put behind each line array hang in vertical array form as per site requirement complete as per tender specifications. |
| 115 | (5) SITC of Front Fill , Compact 6.5-inch Bi-amplified / Passiveswitchable Loudspeaker with 6.5" LF , 1" HF Driver or better,power handling 100 W AES or more,Frequency Response 100 Hz to 20 kHz,Sensitivity 94 dB or better, Maximum SPL 120 dB or more, it shall have rotatable horn with Vertical dispersion 45° to 60° and Horizontal dispersion 120° - 140° or better, wooden enclosure, complete with U Bracket. |
| 116 | (6) SITC of Two-Way compact Co-axial Active Portable Stage Monitorwith 15" LF and 1.4" HF compression driver, built-in DSP including delay, Crossover, Limiter, presets, Equalization, Built-In Class-D Amplifier, Frequency Response (+/-3dB): 60 Hz – 18 kHz, 60°-70° H x 40°-50° V Nominal rotatable Dispersion, Maximum SPL 132 dB peak or more. Wooden enclosure. |
| 117 | (7) SITC of Stage Side Fill Portable Subwoofer, Active Subwoofer with18" LF driver, built-in DSP including delay, Crossover, Limiter, presets, Equalization, Built-In Class-D Amplifier, Frequency response (+/-3dB): 40 Hz - 150 Hz ,Maximum SPL 136 dB peak or more, plywood enclosure |
| 118 | (8) SITC ofControl Room Speaker , Bi-amplifier studio reference monitor with DriverLF - 5" & HF- 0.75" Metal Dome or better; LF & HF amplifier channel output of 50 watts or more, Frequency response : 54 Hz - 20 kHz (± 2 dB), Maximum SPL short term (averaged from 100 Hz to 3 kHz at 1 m) : 104 dB; Analogue signal input connector XLR female, balanced 10 kOhm. Should be supplied with Table stand from Same OEM |
| 119 | (9) SITC of Wall Mount speaker for Green rooms and other areas System Type: Wall Mount Speaker Driver Size: Min. 1 x 6” Driver or better Power Continuous / Programme: 60 W / 120 W Maximum SPL : 114dB peak Dispersion: 90 Degree Conical or Better @ 1kHz Frequency Range:50 Hz-20 kHz or better Sensitivity: 90dB or better Transformer Tap 70V / 100V: Built-In upto 60W Enclosure: ABS,Grille Aluminium Finish: UV Resistant Powder Coated Included Accessories: Yoke bracket |
| 120 | (10) SITC of 6" 2-way In-Ceiling Loudspeaker with 50 Watts continuous, 200Watts peak power , 8 Ohms, EN54-24:2008 certified , Transformer Tap for 70V/100V.Driver Size :1 x 6.5” LF Driver RMS Power : 50 W Nominal impedance: 8 Ohm Transformer Taps : 100V / 70V upto 30W Frequency Range : 75 Hz-20 kHz Maximum SPL : Peak - 113dB Dispersion: 110 Degree Conical Sensitivity: 90dB Certification: UL1480, UL2043, EN54-24:2008 certified Aluminum, powder coated grill |
| 121 | (11) SITC of 4-channel 12000Watt Network amplifier with DSP Class TD or D Nos. of Channel : 4 Power Handling : 4 × 3000 W @ 2/4 Ohms, 4 × 1900 W @ 8 ohms, 4 × 950 W @ 16 ohms Max power per channel in case of bridge mode / Power management should be 4600 watts @ 4 ohms and 2300 watts @ 8 ohms, and 5500 Watts @ 2.67 Ohms Amplifier Gain configurable gain from 22dB to44 dB THD 20Hz-20kHz at 1 W <0.05% Dynamic Range >114 dB Channel separation at 1 kHz >70 dB Frequency Response (1W into 8 ohm,20 Hz-20kHz) +/- 0.05 dB Peak output Voltage 194V with Max output current upto 67AMps 96KHz Sample Rate DSP Features: classic/linear-phase/FIR speaker processing platform with four throughputs DSP Features: Group control with Raised Cosine MESA EQ asymmetric filters Peak and RMS limiters Support Multiple make Speaker presets Comprehensive clocking management system with low latency sample rate conversion Protection Features: Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection Eight dual-redundant Dante network audio inputs 4 Analog Inputs(In case OEM is quoting different channel amplifier configuration in that case they have to quote multiple Qtys. against tender qty to match the minimum power requirements per Channel) |
| 122 | (12) SITC of 4-channel 8000Watt Network amplifier with DSP Class TD or D Nos. of Channel : 4 Power Handling : 4 × 2000 W @ 2/4 Ohms, 4 × 1500 W @ 8 ohms, 4 × 750 W @ 16 ohms Max power per channel in case of bridge mode / Power managmenet should be 4600 watts @ 4 ohms and 2300 watts @ 8 ohms, and 5500 Watts @ 2.67 Ohms Amplifier Gain configurable gain from 22dB to44 dB THD 20Hz-20kHz at 1 W <0.05% Dynamic Range >114 dB Channel separation at 1 kHz >70 dB Frequency Response (1W into 8 ohm,20 Hz-20kHz) +/- 0.05 dB Peak output Voltage 194V with Max output current upto 67AMps 96KHz Sample Rate DSP Features: classic/linear-phase/FIR speaker processing platform with four throughputs DSP Features: Group control with Raised Cosine MESA EQ asymmetric filters Peak and RMS limiters Support Multiple make Speaker presets Comprehensive clocking management system with low latency sample rate conversion Protection Features: Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection Eight dual-redundant Dante network audio inputs 4 Analogue Inputs (In case OEM is quoting different channel amplifier configuration in that case they have to quote multiple Qtys. against tender qty to match the minimum power requirements per Channel) |
| 123 | (13) SITC of 4-Channel 4000 Watts Power amplifier Class TD or D Nos. of Channel : 4 Power Output all channel driven: 4 x 1000 W @ 4 Ohms, 4 x 1000 W @ 8 Ohms per channel Max power per channel in case of bridge mode / Power managmenet should be 1700 watts @ 4 ohms and 1300 watts @ 8 ohms 70/100 Volt compatible THD 20Hz-20kHz at 1 W <0.05% Dynamic Range >112 dB Channel separation at 1 kHz >70 dB Frequency Response (1W into 8 ohm,20 Hz-20kHz) +/- 0.05 dB Peak output Voltage 145V with Max output current upto 30Amps 96KHz Sample Rate DSP Features: classic/linear-phase/FIR speaker processing platform with four throughputs DSP Features: Group control with Raised Cosine MESA EQ asymmetric filters Peak and RMS limiters Support Multiple make Speaker presets Protection Features: Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection Eight dual-redundant Dante network audio inputs 4 Analog Inputs (In case OEM is quoting different channel amplifier configuration in that case they have to quote multiple Qtys. against tender qty to match the minimum power requirements per Channel) |
| 124 | (14) SITC of 4-Channel 1000 Watts Power amplifier Class TD or D Nos. of Channel : 4 Power Output all channel driven: 4 x 500 W @ 2, 4, 8 & 16 Ohms Max power per channel in case of bridge mode / Power managmenet should be 1500 watts @ 4 ohms and 1000 watts @ 8 ohms 70/100 Volt compatible THD 20Hz-20kHz at 1 W <0.05% Dynamic Range >112 dB Channel separation at 1 kHz >70 dB Frequency Response (1W into 8 ohm,20 Hz-20kHz) +/- 0.05 dB Peak output Voltage 140V with Max output current upto 30Amps 96KHz Sample Rate DSP Features: classic/linear-phase/FIR speaker processing platform with four throughputs DSP Features: Group control with Raised Cosine MESA EQ asymmetric filters Peak and RMS limiters Support Multiple make Speaker presets Protection Features: Current Average Limiter (CAL), Very High Frequency Protection (VHF), Direct Current Protection (DC), Short Circuit Protection, Current-Clip Limiter, Voltage Clip Limiter, Temperature protection Eight dual-redundant Dante network audio inputs 4 Analog Inputs (In case OEM is quoting different channel amplifier configuration in that case they have to quote multiple Qtys. against tender qty to match the minimum power requirements per Channel) |
| 125 | (15) SITC of Live Digital Mixing Console with 144 flexible Input & output Channels No of input channel: upto 144 flexible inputs Nos of Aux/Bus : 96 Nos of Master Bus : 3 Nos of Matrices : 24 VCA Groups : 24 User Assignable Layers : 24 Customisable faders : 28 Motorized Effects : Upto 96 Stereo FX Time Aligned / Phase Coherent Buses with Delay compensation : yes It should have min. 21" Multi Touch full colour Screen It should have 40 18-bit colour 240x240 channel LCDs Should support Assignable Macros Should have EQ with All Pass Filter Should have Slot Card for DANTE, MADI,AES50, USB interfaces Graviton Audio Engine is incorporated into surface HyperMAC networking allows up to 480 inputs and 480 outputs @ 96 kHz sample rate Dual Network Bridge Format Converter with up to 128 Bidirectional Channels and Asynchronous Sample Rate Conversion Integration into dedicated cloud storage via Internet |
| 126 | AFL/PFL configurable for input and output True 64 bit FPGA processing with GPU co-processing Famed processing delay compensation and phase alignment giving a maximum latency of 2ms Flexi - Aux Processing means Input - Aux - Aux - Matrix routing (Delay compensated ) stem Processing Should Support Optional wireless remote control for iPad* Dual redundant auto-ranging universal switch-mode power supplies Should have minimum 4 ports built-in for Stage box connectivity expandable up to 6 by adding an accessory card in the slot of same Audio Group Family Should have minimum 8 mic/Line inputs and 8 Line outputs Should have 2 HDMI ports Should have 2 nos. Snake connectivity over copper and optical ports Should have port for Talkback Should have port for AES3 connectivity Should have MIDI port with In, Out and Through port Should have port for World clock Should have LAN port Features : Stereo Delay, Channel Limiter, Compressor, 4 band Dynamic EQ, Chorus, Flanger, Phaser, Pitch Shifter, Rotary Speaker, Voice Doubler, Enlightenment Basses |
| 127 | (16) SITC of 48 Input, 16 Output Stage Box with 48 Microphone Preamplifiers Stage Box shall befrom same manufacture of Digital Mixer Microphone Preamplifier Channel: min 48 Line Output: min16 actively balanced low impedance Sampling Rate: 96KHz Dynamic Range: 107dB @ 20Hz to 20KHz Crosstalk @1KHz: -100dB MIDI (IN / OUT): YES Remote operation up to 100 m via CAT5/5e cable 3 AES50 network ports for redundant connections All settings programmable from front panel controls or console Two auto-ranging universal switch-mode power supplies with dual redundancy |
| 128 | (17) SITC of 16 Input, 8 Output Stage Box with 16Microphone Preamplifiers Stage Box shall befrom same manufacture of Digital Mixer Microphone Preamplifier Channel: min 16 Line Output: min8 actively balanced low impedance Sampling Rate: 96KHz Dynamic Range: 107dB @ 20Hz to 20KHz Crosstalk @1KHz: -90dB Remote operation up to 100 m via CAT5/5e cable 2 AES50 network ports for redundant connections All settings programmable from front panel controls or console |
| 129 | (18) SITC of UHF Wireless Lavalier microphone system Cardioid Condenser Receiving System : True Diversity Modulation mode : FM Frequency Response : 31 Hz to 15,500 Hz RF Sensitivity:20 dBuV at 60 dBA S/N ratio (50? termination) Total Harmonic Distortion:1.0 % or less (at 1 kHz, ±17.5 kHz deviation) Dynamic Range 115 dB or higher (A-weighted), typical switch function : Mute/unmute& On/OFF Unique multifunction button to switch to a backup frequency Operating range: 100 m RF Power Output High: 30 mW, Low: 10 mW (switchable) No. of Channel : 40 channels per band UHF tuning bandwidth : 60 MHz Minimum Frequency Step : 25 kHz Antenna Input :BNC type, 50O - BIAS voltage 12V DC 60mA each for powering an antenna booster, active splitters, an antenna combiner or any other active component. Maximum Output level XLR / Balanced: +14 dBV & 6.3 mm (¼"") / Unbalanced: +8 dBV Auto squelch, Frequency Scan & IR sync for easy setup. Accessories Included: detachable Antennas, Rack mount kit |
| 130 | (19) SITC of UHF Wireless Handheld microphone system Cardioid Dynamic Receiving System : True Diversity Modulation mode : FM Frequency Response : 25 Hz to 16,700 Hz RF Sensitivity:20 dBuV at 60 dBA S/N ratio (50? termination) Total Harmonic Distortion:1.0 % or less (at 1 kHz, ±17.5 kHz deviation) Dynamic Range 115 dB or higher (A-weighted), typical switch function : Mute/unmute& On/OFF Unique multifunction button to switch to a backup frequency Operating range: 100 m RF Power Output High: 30 mW, Low: 10 mW (switchable) No. of Channel : 40 channels per band UHF tuning bandwidth : 60 MHz or better Minimum Frequency Step : 25 kHz Antenna Input :BNC type, 50O - BIAS voltage 12V DC 60mA each for powering an antenna booster, active splitters, an antenna combiner or any other active component. Maximum Output level XLR / Balanced: +14 dBV & 6.3 mm (¼"") / Unbalanced: +8 dBV Microphone capsule : Interchangeable industry standard thread Auto squelch, Frequency Scan & IR sync for easy setup. Accessories Included: detachable Antennas, Rack mount kit |
| 131 | (20) SITC of UHF Wireless Head worn microphone system OmnidirectionalCondenser Receiving System : True Diversity Modulation mode : FM Frequency Response : 31 Hz to 15,500 Hz RF Sensitivity:20 dBuV at 60 dBA S/N ratio (50? termination) Total Harmonic Distortion:1.0 % or less (at 1 kHz, ±17.5 kHz deviation) Dynamic Range 115 dB or higher (A-weighted), typical switch function : Mute/unmute& On/OFF Unique multifunction button to switch to a backup frequency Operating range: 100 m RF Power Output High: 30 mW, Low: 10 mW (switchable) No. of Channel : 40 channels per band UHF tuning bandwidth : 60 MHz Minimum Frequency Step : 25 kHz Antenna Input :BNC type, 50O - BIAS voltage 12V DC 60mA each for powering an antenna booster, active splitters, an antenna combiner or any other active component. Maximum Output level XLR / Balanced: +14 dBV & 6.3 mm (¼"") / Unbalanced: +8 dBV Auto squelch, Frequency Scan & IR sync for easy setup. Accessories Included: detachable Antennas, Rack mount kit |
| 132 | (21) SITC of Networked Two-Bay Recharging Station to recharge NiMH batteries in two handheld transmitters and/or Bodypack transmitters in any combination Built-in safety feature monitors cell voltage and automatically turns off the unit if problems are detected Automatic shut-off if alkaline (non-rechargeable) batteries are installed Automatic shut-off if damaged batteries are installed Maintenance charging prevents battery self-discharge until the transmitter is removed from charger Up to five charging stations can be linked and powered by a single power supply Transmitters power off automatically when placed in the charging station and power on automatically when removed Indicator LEDs for easy monitoring of power and charging status Ethernet port available to connect to a network, allowing the charging status of all transmitters in linked stations, to be monitored through the dedicatedapp or third-party software. |
| 133 | (22) SITC of Pair of UHF wide-band directional LPDA (log periodic dipole array) antennas Operating Bandwidth : 470-990 MHz Antenna Type : LPDA (log periodic dipole array) antennas Impedance : 50 Ohms Typical Gain : 6 dB Typical Polar Pattern : Elliptical, 90° acceptance, typical Polarization : Vertical (when mounted vertically) Enhanced signal pickup for UHF wireless systems The antennas must be constructed of industrial-grade copper-clad epoxy fiber-glass engineered to resist the effects of corrosion,UV degradation and vibration, providing long life and stable performance under difficult operating conditions Must have High-quality, low-loss BNC connectors to minimize RF cable strain Mounts should be 5 / 8 "-27 threaded fitting and designed to allow for vertical tilt adjustment through a 90°range Horizontal adjustment should be possible by rotating the antenna in the mounting fitting |
| 134 | (23) SITC of Antenna distribution system UHF (wide-band 440-900 MHz) active unity-gain diversity system Enables one pair of antennas to feed Four wireless systems Each distribution system must have identical independent 1-in by 4-out sections each providing a single antenna input,four isolated protected RF outputs and 1 cascade output Interconnection of the units in a cascade fashion for an expanded system must be possible All RF connections shall be rear panel mounted using standard BNC-type connectors High OIP3 (+ 32 dBm) for maximum protection against intermodulation 12V DC power to each antenna input to operate powered antennas or in-line RF devices up to 100 mA minimum. Accessories Included: Rack mount kit & BNC cable x 8 |
| 135 | (24) SITC of Pair of Active Antenna Combiner Kit with Frequency Range :440-900 MHz,The Active Antenna Combiner provides unity gain to compensate for RF signal loss associated with combining signals Switchable power pass-through Each combiner shall draw no more than 30 mA current at 12V DC Input/Output connector : BNC Each kit must includes: two dual-input, one-output Active Antenna Combiners & two 18” BNC-to-BNC RG 58 coaxial antenna cables |
| 136 | (25) SITC of Pair ofUHF wideband powered in-line antenna boosters with Frequency Range :440-990 MHz, Increase the RF signal strength to compensate for antenna cable loss, Selectable Gain : 6 dB position: 6 dB typical (green) 12 dB position: 12 dB typical (red) Power status LED indicator Each booster contains an integral RF amplifier powered by 12V DC provided on the antenna cable by the associated wireless receiver or antenna distribution system.60mA Current/Power consumption or better,Input/Output connector - BNC |
| 137 | (26) SITC of RF antenna cable with BNC to BNC connectors, RG8-type cable. 100" (30 m).The cables are constructed of a flexible low loss RG8-type coaxial with molded BNC-type connectors. |
| 138 | (27) SITC of 5 pin Desk stand modular Goose-neck Microphone with RGB LED Ring along with Logic switch. Cardioid Condenser, Goose-neck Length: 18" Frequency Response : 30 - 20,000 Hz, Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa , Maximum Input Sound Level: 140 dB SPL , Dynamic Range:112 dB , Signal-to-Noise Ratio: 66 dB, Impedance : 130 ohms, Output Connector: Integral 3-pin XLRM- type, Local/remote switching operation enables independent microphone audio and control output, Logic I/O capability permits control of remote devices from the power module’s touch-sensitive capacitive-type user switch, Capacitive touch switch can be set to any one of three operating modes: “touch-on/touch-off,” “touch-to-talk” and “touch-to-mute”,RFI shielding & must Accepts interchangeable elements to permit angle of acceptance from 90° to 360° Accessories Included: Windscreens & Included isolators provide mechanical dampening of mounting surface vibration |
| 139 | (28) SITC of Wired Lead Vocal Dynamic Handheld Microphone with pick up Pattern: Cardioid or better, Frequency Response : 90 - 18,000 Hz Impedance : 250 ohms,Open Circuit Sensitivity: –55 dB (1.7 mV) re 1V at 1 Pa Output Connector: 3 pin XLR Type,Superior anti-shock engineering for low handling noise,Optimized for the stage with excellent isolation properties and Tough, durable, resilient – built for the road, Accessories Included: Stand clamp forthreaded stands; threaded adapter; soft protective pouch Tough, durable, resilient – built. , Corrosion-resistant gold-plated XLRM- type connector, Accessories Included: Adjustable stand clamp & Soft protective Pouch |
| 140 | (29) SITC of Wired Dynamic Vocal Handheld Microphone for general purpose with pick up Pattern: Hyper cardioid , Frequency Response : 40 - 16,000 Hz Impedence : 300 ohms , Open Circuit Sensitivity: –55 dB (1.7 mV) re 1V at 1 Pa Output Connector: 3 pin XLR Type , Rugged metal construction for long-lasting performance & Rare-earth magnet for improved output and transient response, Anti-shock engineering for low handling noise & Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity. Corrosion-resistant gold-plated XLRM-type connector, Accessories Included: Adjustable stand clamp & Soft protective Pouch |
| 141 | (30) SITC of Wired Dynamic instrument Microphone for percussion with pick up Pattern: Hyper cardioid , Frequency Response : 80 - 17,000 Hz, Impedance : 300 ohms , Open Circuit Sensitivity: –56 dB (1.5 mV) re 1V at 1 Pa , Output Connector: 3 pin XLR Type , Corrosion-resistant contacts from gold-plated XLRM- type connector. Special dual-wall floating construction reduces handling noise and assures consistent performance from mic to mic Rugged metal construction for long-lasting performance & neodymium magnet for improved output and transient response. Accessories Included: Adjustable stand clamp & Soft protective Pouch |
| 142 | (31) SITC of Wired Dual element instrument Kick Drum Microphone Two elements (condenser and dynamic) are enclosed in a single housing Pick up Pattern: Cardioid , Frequency Response : 20-17,000 Hz (condenser) ;30-10,000 Hz (dynamic), LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave (condenser) , Impedance : 100 ohms (condenser) ; 600 ohms (dynamic), Open Circuit Sensitivity: -51 dB (2.8 mV) re 1V at 1 Pa (condenser);-54 dB (1.9 mV) re 1V at 1 Pa (dynamic), Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser);158 dB SPL, with 10 dB pad (nominal), Dynamic Range: 124 dB, 1 kHz at Max SPL (condenser) Signal-to-Noise ratio: 70 dB, 1 kHz at 1 Pa (condenser), 3 pin XLR Type Output Connector,Phantom Power Requirement 11-52V DC, 3 mA typical (condenser) Rugged metal construction for long-lasting performance & Integral 80 Hz HPF switch and 10 dB pad on condenser element ( condenser only) Accessories Included: Isolation clamp & Soft protective Pouch |
| 143 | (32) SITC of Wired Dynamic instrument Microphone for SNARE TOP AND BOT with pick up Pattern: Hyper cardioid , Frequency Response : 80 - 17,000 Hz , Impedance : 300 ohms, Open Circuit Sensitivity: –56 dB (1.5 mV) re 1V at 1 Pa Output Connector: 3 pin XLR Type, Corrosion-resistant contacts from gold-plated XLRM- type connector. , Special dual-wall floating construction reduces handling noise and assures consistent performance from mic to mic, Rugged metal construction for long-lasting performance & neodymium magnet for improved output and transient response. Accessories Included: Adjustable stand clamp & Soft protective Pouch |
| 144 | (33) SITC of Wired Instrument mic for TOM with fixed-charge back plate, permanently polarized condenser element, Pick up Pattern: Cardioid Frequency Response : 40 - 20,000 Hz, Low Frequency Roll Off: 80 Hz, 12 dB/octave, Impedance : 200 ohms, Open Circuit Sensitivity:–49 dB (3.5 mV) re 1V at 1 Pa , Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 130 dB, 1 kHz at Max SPL , Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa, Output Connector: 3 pin XLR Type, Phantom Power Requirements: 11-52V DC, 3.5 mA typical, Rugged all-metal construction & Integral 80 Hz HPF switch and 10 dB pad., Should have Interchangeable elements available for hyper cardioid and omnidirectional polar patterns, Rugged UniMount® 5" goose-neck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play, Accessories Included: With drum mount, in line power module, 5 inch unimount goose-neck & Soft protective Pouch |
| 145 | (34) SITC of Wired instrument Microphone for HI HATS AND OVER HEADS with fixed-charge back plate permanently polarized condenser element, Pick up Pattern: Cardioid , Frequency Response : 30-20,000 Hz, Impedance : 250 ohms Open Circuit Sensitivity: –39 dB (11.2 mV) re 1V at 1 Pa, Maximum Input Sound Level: 145dB SPL, 1 kHz at 1% T.H.D., Dynamic Range: 126 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 75dB, 1 kHz at 1 Pa, Phantom Power 48V DC, 2 mA typical, 3 pin XLR Type Output Connector, Corrosion-resistant gold-plated XLRM-type connector, Rugged design and construction for reliable performance, Accessories Included: Adjustable Stand clamp; soft protective pouch |
| 146 | (35) SITC of On stage- BoundaryMicrophone ELEMENT: Fixed-charge back plate, permanently polarized condenser with two-state RGB LED indicator Pick up Pattern: cardioid and also support inter chnagbel elements (Cardioid or Hyper Cardioid or Omnidirectional) Touch-sensitive capacitive-type switch for three operating modes: touch-on/touch-off, press to talk, and press to mute. External contact closure capability allows a user to trigger an external device Frequency Response : 20 - 20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa Maximum Input Sound Level:130 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 104 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 68 dB, 1 kHz at 1 Pa Impedance : 50 ohms RFI Shielding rotating output connector allows cable to exit from either the rear or the bottom of the microphone Accessories Included: TA3F to XLRM-type 7.6 mtrs cable |
| 147 | (36) SITC of Adjustable tripod stand with Boom Heavy Duty Clutch Assembly Finished in Non-Reflective Ebony Three, low profile metal legs with cup terminations for optimum stability and balance tripod adjustable from 36" to 64" Two section metal tubing with 3 piece clutch for easy vertical height adjustment The end is threaded 5/8"-27 and includes a lock-nut ring for versatile positioning of accessories or extension boom Base spread of 25" (653mm) inches and weighs 5lbs or less Friction notches on the boom swivel to prevent sagging when using heavy microphones BOOM LENGTH of 22" - 37" and STAND HEIGHT of 19" - 30" Cast 0.5 lb counterweight allows for proper boom positioning while maintaining boom arm balance |
| 148 | (37) SITC of ALL-PURPOSE heavy duty Floor Microphone Stand , 12" dia. die cast circular base or better size,Edge concentrated weight distribution, Equipped with rubber pads to absorb shock and protect floor surfaces. The 5/8" and 7/8" dia. tubing is fully adjustable with a vertical extension ranging from 37" to 66" with Wearproof, 3-Piece Clutch Offers Secure, Fast, & Noise-Free Height Adjustment, Tubing is manufactured of cold rolled steel , Industry standard 5/8" - 27 thread suitable for microphone clamps and accessories, Top and bottom lock-nut rings, finished in ebony epoxy to eliminate reflections caused by high-intensity lighting |
| 149 | (38) SITC of ALL-PURPOSE DESK STAND,Base Size : 10", Stand Height adjustable 9" to 12" with Wear-proof, 3-Piece Clutch Offers Secure, Fast, and Noise-Free Height Adjustment, Versatile Stands Full Functional and Aesthetic Miking Requirements for Microphone Placement, Ideal for professional miking of drum kits, percussion and string instruments, and guitar/bass guitar amplifiers.Includes a threaded tip assembly for compatibility with a variety of booms, clamps, goose-necks, and accessories. |
| 150 | (39) SITC of Active Stereo DI Box for electronic instruments with48 V phantom Power,Extended Dynamic Range ,Sum and split options,20 dB input padEarth lift switches,Impedance 75 O |
| 151 | (40) SITC of Active DI Box for electronic instruments with maximum input level 35 dBu, 48 V phantom Power,Frequency Range 20 Hz to 20 kHz, ±1 dB, 10 kO load ,20 dB input pad and earth lift switches,Impedance 50 O |
| 152 | (41) SITC of Wall / Floor mount box with 4 x Microphone input etc. complete with installation as per the site requirement |
| 153 | (42) SITC of Wall / Floor mount box with 2 x Speaker output etc. complete with installation as per the site requirement |
| 154 | (II) VIDEO SYSTEM |
| 155 | (43)SITC of 2.5mm pixel pitch Active LED Video Wall of size: 18.8mtr x 8mtr Configuration: Maximum 2.5 mm pixel pitch LED wall to make a minimum image size of 18.8m X 8m with 5% deviation Controller should be from the same manufacturer Technology : Maximum 2.5mm pixel pitch direct LED Wall Brightness on screen Minimum 800 nits Pixel Density 160,000 pixels/m2 (Resolution:- 7488x3264) LED lifespan= 100,000 hours Power Redundancy Inbuilt power redundancy Contrast ratio 5000:1 Control : IP based control to be provided Refresh rate =3000Hz Operating Temperature 0-40°C IP rating 30 or better Humidity 10-90% Maintenance Access Should be 100% front serviceable Mounting : ADA complied OEM mount from same LED manufacturer Accessories, Cables etc : All cables, accessories, Mounting Kits required to complete the installations and commissioning of the system must be included. |
| 156 | (44) SITC of UHD 4K 98" Professional display Edge/Direct-lit LED, LED Life Span 50,000Hrs. 98" Professional Display with 4K UHD 3840 x 2160 (16:9) Backlight Direct-lit LED LED Lifespan 50,000 Hrs Brightness: 350cd/sqm Contrast Ratio: 1200:1 Viewing Angle: 178degree h x v Refresh Rate: 60Hz Response Time: 8ms, Display Colors: 8bit, 1.07billion Video Input: Min 3 x HDMI, 1 x Display Port Video Output: HDMI, Display Port Audio Input: Line In, Audio Output: Optical Audio Output Built-in OPS Slot "Addon Feature: Auto Source Switching Anti Glare Treatment USB media playback of Photo / Video /MP3, Source Switching for failover HDMI-CEC Built-in / via Dongle Wi-Fi and Miracast device connectivity 2 x 8W built-in speaker Pixel Shifting RS232 , LAN Control" etc complete withaccessories |
| 157 | (45) SITC of display mount size upto 98" Display |
| 158 | (46) SITC of UHD 4K 55" Professional display Edge/Direct-lit LED, LED Life Span 50,000Hrs. Confidence Monitor/Signage- 55" Professional Display with 4K UHD 3840 x 2160 (16:9) Backlight Edge / Direct-lit LED LED Lifespan 50,000 Hrs Brightness: 500cd/sqm Contrast Ratio: 1200:1 Viewing Angle: 178degree h x v Refresh Rate: 60Hz Response Time: 8ms Display Colors: 10bit, 1.07billion Video Input: Min 3 x HDMI, 1 x Display Port Video Output: HDMI, Display Port Audio Input: Line In, Audio Output: Optical Audio Output Built-in OPS Slot HDR10 Support "Addon Feature: Auto Source Switching USB media playback of Photo / Video /MP3, Source Switching for failover HDMI-CEC, Built-in / via Dongle Wi-Fi and Miracast device connectivity 2 x 8W built-in speaker, Video Wall Mode, Pixel Shifting, RS232 , LAN Control" |
| 159 | (47) SITC of Portable trolley for display tilt at an angle of 45degree etc complete for size upto 55" Display |
| 160 | (48) SITC of display mount size upto 55" Display |
| 161 | (49) SITC of floor box for AV Floor Box with space to mount HDBT Transmitter, 2 x LAN ports, 3 x Universal UPS power supply points. Conference Network point, All Electrical points to conform BIS certifications. |
| 162 | (50) SITC of Tabletop cable access enclosure kit for HDMI ,USB-C and USB cables with under-table cable management system with supplied insert holds three cables etc complete |
| 163 | (51) SITC of Active Decora-style wall plate (shall be mounted inside floor box on stage) System Type: Wall plate HDBaseT transmitter for HDMI and USB-C Input Port: 1 x HDMI, 1 x USB-C Output Port: 1 x HDBaseT Data Port: 1 x USB Host, 1 x USB HUB Signal & Control Extension: Transmitter for AV, Power, Control & Data upto 100mtr using CATx cable Resolution Support: 4K/UHD @ 60 Hz with 4:2:0 Remotely powered over HDBaseT Auto Switching: Select Active input via Hot Plug & Video Detect Technology Auto Display Control: Automatic Display On / Off control based on switcher. Control signals to display are transmitted via IP, RS-232 or CEC. Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0 Color Depth: 8-bit, 10-bit, 12-bit Bandwidth 10 Gbps HDCP & EDID Management Control : TCP/IP and RS-232 Cable Link Monitoring: Integrated HDBaseT link status monitoring Enclosure: One / Two Gang for Wall plate Opening |
| 164 | (52) SITC of Universal 5X2 Switcher with Wireless Link Kit 4K switcher with wireless connectivity (BYOD) Wireless presenter should have 2XHDMI, 1XUSB C and 1XDisplay port for wired connection in case of failure of network 2 X USB2.0 HUB, 2X USB2.0X HOST Wireless presenter should support Miracast/Chromecast/Air play Presenter should not setup any exe file in laptop or mobile device for presenting wireless on screen, and Native wireless casting for iOS, AndroidTM, Mac, ChromebookTM, and Windows HDMI and HDBT output which can work as mirror mode or individual mode like matrix. HDCP 2.2 and EDID management 4K/UHD capability @60Hz with 4:4:4 Chroma subsampling Local HDMI/USBC and Display port should support 4K/60 4:4:4 and HDR Automatic input selection using hot plug detect USB-C port should support device charging for laptop, Tablet and smartphone Provision of Analog audio embedding and Ed-embedding Certification : CE, FCC |
| 165 | (53) SITC of HDBaseT compatible receiver for HDMI with USB HDBT Receiver for USB/Power/HDMI/Ethernet USB 2.0 interface extension up to 100 meters of cat cable length. Receiver with 1XHDMI out, 1XHDBaseT IN, 2XUSB. Receivershould support 4K/UHD cpablity@60Hz with 4:2:0 HDCP 2.2 Compliance. Receiver should have Four USB device connectivity with one Hosp PC connection. Receiver powered by receiver over POE. Receiver should support multi-channel audio pass through. Certification : CE, FCC |
| 166 | (54) SITC of HDMI Matrix Switcher 8 x8 HDMI Matrix Switcher 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling Supports HDR10 Format Independent CEC display control to each output HDMI audio de-embedding for each input TCP/IP, RS-232, and IR control Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0 Color Depth: 12-bit HDMI, HDCP, CEC compliant Bandwidth: 18 Gbps "Audio: Support Dolby Digital Format Sample Rate: 192kHz Bit Rate: 24bit" |
| 167 | (55) SITC of 4K/UHD HDMI to HDBaseT Distribution 1 x 4 HDMI to HDBaseT Distribution Amplifier 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling HDCP 2.2 compliant HDMI distribution amplifier with built-in HDBaseT transmission up to 330 feet (100 meters) HDMI input with pass-though Four HDBaseT outputs PoE (Power over Ethernet) source – remotely powers PoE- compatible receivers Transmits RS-232, IR, CEC, and Ethernet control signals over HDBaseT Display control using Consumer Electronics Control (CEC) |
| 168 | (56) SITC of 4K HDMI Over 100mtr HDBaseT Transmitter with Ethernet, Control, PoE, 4K/UHD capability @ 60 Hz HDBT Transmitter - 4K/UHD video, audio, 100Base-T Ethernet, power, and controlover a single CAT6a OR CAT7 cable up to 100 m distance 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling support HDCP 2.2 Compliant Supports 4K HDR10 Supports HDMI data rates up to 10 Gbps or better Multi Channel Audio Compliant PCM, Dolby Digital, DTS Digital Surround etc TransmitsHDMI, Power, Ethernet and Control over a single CAT6a OR CAT7 cable up to 100 m distance. |
| 169 | (57) SITC of 4K HDMI Over 100mtr HDBaseT Receiverwith Ethernet, Control, PoE with built-in scalar HDBaseT Receiver with local HDMI Input HDBT receiver - 4K/UHD video, audio, 100Base-T Ethernet, power, and controlover a single CAT6a OR CAT7 cable up to 100 m distance Automatic input selection using hot plug detect and video detection technology 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling support EDID Management, HDCP Management (HDCP 2.2 Compliant), CEC Enable 4K/UHD downscaling and upscaling Built-in Audio De-Embedding Supplies Power over HDBaseT to a Transmitter Multi Channel Audio Compliant PCM, Dolby Digital, DTS Digital Surround etc Automatic Display Control |
| 170 | (58) HDMI over HDBT receiver for 100 meters 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling HDCP 2.2 compliant Supports 4K HDR10 HDBaseT receiver for HDMI, Ethernet, power, and control up to 330 feet (100 meters) Remotely powered via PoE (Power over Ethernet) Receives RS-232, IR, CEC, and Ethernet control signals over HDBaseT Audio Support - PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus™, Dolby TrueHD, DTS-HD, Master Audio™, Dolby Atmos®, DTS:X® |
| 171 | (59) SITC of 4K/UHD HDMI Over 100 M HDBaseT Extender kit with Ethernet, Control, and PoE for Camera Transmitter 1X HDBaseToutput with extension range upto 100 meters. POE Transmitter with Ethernet and Control pass through. Transmitter should support resolution upto 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats Front panel LED indication for Power and HDBT link. Transmitter should be able to pass multi-channel Audio format on HDMI. 4K/UHD capability @ 60 Hz Maximum TMDS Clock 600 MHz HDCP 2.2 compliance It shoud be powerd externally too and over POE. Output HDbaseT and Input HDMI Optical OUT : 1 – TOSLINK Certification : CE, FCC Receiver POE receiver with Ethernet and Control pass through. Receiver should support resolution upto 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats, It shoud be powerd via transmitter. Receiver should be able to pass multi-channel Audio format on HDMI. Maximum TMDS Clock 600 MHz HDCP 2.2 compliance Optical IN : 1 – TOSLINK Certification : CE, FCC |
| 172 | (60) SITC ofAndroid Network Media Player complete with lifetime support and license Content can be uploaded and managed from anywhere via web portal Create Custom Layouts, Schedule Playlists, Remote Screen Functions Network Media player connectivity support both Wireless and Wired LAN Network Supported Files and Formats: Images - JPG, GIF, BMP, PNG, Video - MPG, AVI, MP4, RM, RMVB, TS and Audio -MP3, WMA RSS feeds are also available in the form a scrolling text ticker on screen Video Output: HDMI, VGA Media Resolution: 1920 x 1080 CPU: Quad-Core Cortex-A9 @1.6GHz, Internal Memory: 6GB, RAM: 1GB DDR3, LAN: 10/100M, Wi-Fi: 802.11b/g/n, OS Android 4.2.2, Graphic Engine: GL ES1.1/2.0 or with better configuration |
| 173 | (61) SITC of Desktop CPU Operating system : Windows 10 Pro 64 Processor Name : Intel® Core™ i7-8700 with Intel® UHD Graphics 630 (3.2 GHz base frequency, up to 4.6 GHz with Intel® Turbo Boost Technology, 12 MB cache, 6 cores) Processor family : 8th Generation Intel® Core™ i7 processor Chipset : Intel® Q370 Memory : 8 GB DDR4-2666 SDRAM Hard drive description : 2 TB 7200 rpm SATA, Storage type : HDD Graphics : AMD Radeon™ R7 430 Graphics (2 GB GDDR5 dedicated) Ports On Rear : 1 audio-in; 1 audio-out; 1 power connector; 1 RJ-45; 2 DisplayPort™ 1.2; 2 USB 2.0; 2 USB 3.1 Gen 1; 2 USB 3.1 Gen 2 Port on Front : 1 headphone; 1 headset connector; 1 USB 2.0; 1 USB 2.0 (fast charging); 1 USB 3.1 Type-C™ (charging); 2 USB 3.1 Gen 2, 1 HDMI 2.0 MEDIA DEVICES Audio : Conexant CX20632 codec, universal audio jack, headset and headphone front ports (3.5 mm), multi-streaming capable Complete with minimum 21" display with wireless mouse and keyboard set. |
| 174 | (III) Camera, Web Streaming System, Recording system |
| 175 | (62) SITC of 4K UHDPTZ camera with 30X zoom Optical Zoom 30x or better Video Output (HD) Interface 3G-SDI, HDMI,Ethernet or better Video Stream RTSP / RTMP / MPEG-TS and Video Compression H.265 / H.264 Sensor type 1/2.5" 8MP CMOS Video Format Resultion : 4K/1080p/720p and Frame Rate : 59.94/50/29.97/25 or better Horizontal Viewing Angle 68° or better Panning Angle +170 ~ -170° and Panning Speed min. 300°/sec Tilting Angle +90 ~ -30° and Tilting Speed min. 300°/sec Aperture F1.6 ~ F3.4 and Focal Length 4.6mm ~ 135mm or better Preset Positions min. 256 Video S/N Ratio > 50dB Camera Control Interface RS-232 / RS-422 / Ethernet |
| 176 | (63) SITC of PTZ Camera Controller Joystick for Pan/Tilt/Zoom and focusing Easy operation of versatile camera adjustments The RS-232/RS-422 communication interfaces allow long-distance communication High brightness OLED display Multi-level protection from illegal operation and settings Comm. Interface : Mini Din 8PIN Camera Control (Max.) : 7 Accessories included : Power Cord, Power Adapter |
| 177 | (64) SITC of Professional Video Mixer with multi-effect capability for broadcasting with Built in 4K Scalar Total Video Inputs -8 & Total Outputs -12 Total Aux Outputs -1 (Multiview Preview output) SDI Rates 1.5G, 3G, 6G, 12G. Total Audio Inputs 2 x XLR. 1 x Microphone. Total Audio Outputs 1 x Headphone. SDI Video Inputs 8 x 10-bit HD/UHD switchable. 2 channel embedded audio. Reference Inputs Tri-Sync or Black Burst. Video Input Re-Sync On all 8 inputs. Frame rate and format convertors On all 8 inputs. SDI/HDMI Program Outputs 9 x 10-bit HD/UHD switchable. SDI Audio Outputs 2 Ch embedded into SDI output. Total Multi Views 1 SDI Multi View Outputs 1 HDMI Multi View Outputs 1 "Supported Resolution HD Video Standards: 720p50, 720p59.94 , 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p50, 1080p59.94 , 1080i50, 1080i59.94, Ultra HD Video Standards, 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p50, 2160p59.94 " Media Players 2, with non volatile flash memory. Media Pool Still Image Capacity- 20 with fill and key. Channels -Fill and key for each Media Player. Media Pool Clip Capacity -2 with fill and key. Shared pool |
| 178 | (65) SITC of Digital Video recorder should include 6G-SDI and support SD, HD and Ultra HD formats. It shoud have video and audio connections in both analog and digital SDI Video Inputs : 1 SDI Video Output : 4, Single Link or Quad Link. SDI Rates : 270Mb, 1.5G, 3G, 6G HDMI Video Inputs : 1 x HDMI type A connector including Ultra HD 4K support. HDMI Video Outputs : 1 x HDMI type A connector including Ultra HD 4K support. Analoge Video In/out : Y, B-Y, R-Y Audio Input : 2 x XLR connectors for professional balanced analog audio. 2 x RCA connectors for unbalanced analog audio from consumer equipment. Audio Output : 2 x XLR connectors for professional balanced analog audio. Timecode Connection : 1 x XLR in and 1 x XLR out. SDI Audio Inputs : 16 channels embedded in SD and HD in QuickTime files. 2 channels in Avid DNxHD MXF files. SDI Audio Outputs : 16 channels embedded in SD and HD in QuickTime files. 2 channels in Avid DNxHD MXF files. HDMI Audio Inputs : 8 channels embedded in SD and HD in QuickTime files. 2 channels in Avid DNxHD MXF files. HDMI Audio Outputs : 8 channels embedded in SD and HD in QuickTime files. 2 channels in Avid DNxHD MXF files. Recorder Configuration : Front panel configurable or USB 2.0 high speed interface |
| 179 | (66)SITC of Streaming Device SDI Video Inputs : 1 SDI Video Outputs : 1x program out, 1x loop out. SDI Rates : 270Mb, 1.5G, 3G, 6G, 12G HDMI Video Inputs : 1 HDMI Video Outputs : 1X loop out Analog Audio Inputs : 1x XLR.2 x RCA HiFi. RCA : 2 X HiFi Analog audio input XLR : 1 X input supporting both microphone and line levels USB Webcam : 1 HDMI 2.0 : 1 X Input, 1 X loop out, (2 channel embedded audio) USB 2.0 : 1 X Type B Video Streaming Standards : 720p over USB. Hardware Frame Buffer : Supports any USB UVC and UAC webcam video drivers. Computer Capture : USB webcam for Mac, Windows, Linux and any operating system that supports 720p HD webcams. Basic Settings Control : Mini Switches. Built in Control Panel : None. Supports Teranex Mini Smart Panel with 2.2 inch color display for video preview, audio meters and status. Compatible Services and Software : YouTube Live, Facebook Live, Twitch.tv, Periscope, Skype, Open Broadcaster and XSplit Broadcaster. |
| 180 | (67) SITC ofSDI to HDMI converter SDI Video Inputs : 1 x SD, HD or 6G-SDI. 1 x ALT SDI Input for automatic switch over if main input fails. SDI Video Outputs : 1 x SDI Video Loop Output. HDMI Video Outputs : HDMI type A out. Analog Audio Outputs : 2 channels of balanced analog audio. Digital Audio Outputs : 4 channels of AES/EBU digital audio SD Video Standards : 625i50 PAL, 525i59.94 NTSC HD Video Standards : 720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080i50, 1080i59.94, 1080i60 4K Video Standards : 4K DCI 23.98p, 4K DCI 24p, 4K DCI 25p SDI Compliance : SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M, SMPTE ST-2081 HDMI Video Standards : 625i50 PAL, 525i59.94 NTSC, 720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 1080i50, 1080i59.94, 1080i60, 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30 Power Requirements : +12V universal power supply included with international socket adapters for all countries. Cable tie point. |
| 181 | (68) SITC of SSD for Video Recorder 500GB storage capacity |
| 182 | (69) SITC of UHD 4K 55" Professional display Edge/Direct-lit LED, LED LifeSpan 50,000Hrs. Control Room Monitor- 55" Professional Display with 4K UHD 3840 x 2160 (16:9) Backlight Edge / Direct-lit LED LED Lifespan 50,000 Hrs Brightness: 500cd/sqm Contrast Ratio: 1200:1 Viewing Angle: 178degree h x v Refresh Rate: 60Hz Response Time: 8ms Display Colors: 10bit, 1.07billion Video Input: Min 3 x HDMI, 1 x Display Port Video Output: HDMI, Display Port Audio Input: Line In, Audio Output: Optical Audio Output Built-in OPS Slot HDR10 Support "Addon Feature: Auto Source Switching USB media playback of Photo / Video /MP3, Source Switching for failover HDMI-CEC, Built-in / via Dongle Wi-Fi and Miracast device connectivity 2 x 8W built-in speaker, Video Wall Mode, Pixel Shifting, RS232 , LAN Control" |
| 183 | (IV) POINTS FOR EXTERNAL CAMERA |
| 184 | (70) SITC of Wall Plate - 2-port XLR connector for receiving audio feed from Press Audio Distribution Unit (to be planned at Balcony Level) |
| 185 | (71) SITC of Active Portable Audio press box with 1 x mic/line input, 16 mic/line outputs 1 MIC (phantom power) / LINE Input – balanced with gain control and 26dB PAD 16 High quality internal balanced Outputs, independent transformer isolated Each Output is switchable between MIC or LINE level switchable high pass filter, compressser and limiter, constant level test signal oscillator with no mistake switch operation Headphones control Output Signal to Noise Ratio: 86dB Frequency Response:160Hz to 30kHz Indicators: Input clip, Phantom power, Output level, Gain reduction, Power, Battery status (with battery option) Li-Ion AccuPack with microprocessor controlled battery management |
| 186 | (V) CONTROL SYSTEM |
| 187 | (72) SITC of Network based Control Processor AV Control and Management plus Room Scheduling Network based Control Processor with required number of physical ports like RS-232, IR and Relay Supplied with 3 interface device license each for i-Pad and Android touch interface licence. 2 x LAN/Ethernet Port Shall be accessible from a web browser for setup and management Supports industry-standard, network security features and protocols 3 interface device license each for i-Pad and Android touch interface licence iPhone, iPad, and Android control app support Certifictaion: CE, FCC |
| 188 | (73) SITC of 8? Touch Panel for control (1 in control room + 1 back stage) Wired touch panel with table mount stand or option of wall mount 8” touch panel. Remote powered via POE switch. Single network connection for data and power. Touch panel should support multi touch and gesture interaction. Energy saving feature including adjustable sleep timer Built in speaker and microphone |
| 189 | (74) SITC of Ipad with table mount stand with charging ,access point , GUIand all required accessories etc all Complete Ipad for GUI interface to control Audio Visual Devices-9.7" with wifi |
| 190 | (75) SITC of 24 port PoE Managed network switch 24 Network 1Gig network Switch with POE – copper. Switch Support Switch supports the IEEE 802.3az standard for Energy Efficient Ethernet (EEE) |
| 191 | (76) SITC of Wifi Directional Access Point Omnidirectional to support 802.11 b,g,n, ac and PoE should work in controller less environment |
| 192 | (VI) INSTALLATION EQUIPMENTS |
| 193 | (77) SITC of of Equipment Rack 44U with front glass door, power distribution box, internal fans and lights, wheels etc complete with standard accessories complete as required |
| 194 | (78) SITC of of Equipment Rack 20U with front glass door, power distribution box, internal fans and lights, wheels etc complete with standard accessories complete as required |
| 195 | (79) SITC of 4sqmm speaker cable Low Oxygen copper stranded wire ensure better sound quality and a longer life Construction : (2LIY4mm²)Y Jacket material : PVC Jacket Ø [mm] : 9.5 Inner Conductors :2 x 4mm2 (11AWG) Copper Strands per Conductor: 56 x 0.30mm Temperature min. [°C] : -30 Temperature max. [°C] : 70 Fire load per m [kWh] : 0.46 Capac. cond./cond per 1 m[pF] : 125 Conductor resistance per 1 km [O] : 4.5 Insulat. resistance per 1 km [MO] : 5 Certifications: IEC228, IEC332, IEC60331, IEC61034 |
| 196 | (80) SITC of 2.5sqmm speaker cable Low Oxygen copper stranded wire ensure better sund quality and a longer life Construction : (2LIY2.5mm²)Y Jacket material : PVC Jacket Ø [mm] : 7.8 Inner Conductors :2 x 2.5mm2 (13AWG) Copper Strands per Conductor: 140 x 0.15mm Temperature min. [°C] : -30 Temperature max. [°C] : 70 Fire load per m [kWh] : 0.33 Capac. cond./cond per 1 m[pF] : 136 Conductor resistance per 1 km [O] : 7.5 Insulat. resistance per 1 km [MO] : 5 Certifications: IEC228, IEC332, IEC60331, IEC61034 complete etc as required. (as per actual) |
| 197 | (81)SITC of22AWG Microphone Cable 2 x 0.34sqmm/AWG22 large cross section and the low capacitance cable guarantee outstandig transmission quality over longer distance Oxygen free Copper Strands Low apacitance due to PE insulation Construction : (2LI2Y0,34mm²)CY Jacket material : PVC Jacket Ø [mm] : 6.50 AWG (audio) : 22 Shielding : Copper braided shielding with 0.10 mm indiv. strands Shielding factor [%] : 95 Copper strands (audio) : 19 Conductor insulation material : PE UV-resistant : yes Fire load per m [kWh] : 0.22 Capac. cond./cond. per 1 m (audio) [pF] : 58 Capac. cond./shield. per 1 m (audio) [pF] : 115 Conductor resistance per 1 km [O] : 55 Shield. resistance per 1 km [O] : 25 Temperature min. [°C] : -25 Temperature max. [°C] : 70 Impedance [O] : 100 |
| 198 | (82) SITC of 23AWG CAT6 Shielded cable for Networking, HDBT signal transmission, DANTE Shielded copper cable, category 6A F/UTP, low smoke zero halogen (LSZH), 4-pair, conductors are 23 AWG with PE insulation, twisted in pairs, separated by an integrated pair divider, surrounded by a metallic foil shield and protected by a low smoke zero halogen. Flammability Rating-LSZH-3 (IEC 60332-3), Maximum Operating Temperature (°C) 75 degree or more. support Maximum Installation Tension (lb) 25 or more. Bend Radius (mm) 30 or less. Exceeds the requirements of ISO 11801 Class EA and ANSI/TIA-568-C.2 Category 6A standards; Standards Compliance: UL Listed CMP-LP 0.7A and CMR-LP 0.5A; PoE compliance: Meets IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt for PoE applications; CE Compliant: Euroclass Dca-s2-d2-a1; RoHS Compliant |
| 199 | (83) SITC of HDMI Cables of length 1 M, Bandwidth capacity 18 Gbps |
| 200 | (84) SITC of HDMI Cables of length 2 M, Bandwidth capacity 18 Gbps |
| 201 | (85) SITC of 2 Meter USB-C to USB-C Cable |
| 202 | (86) SITC of HD-SDI cable Digital Video, 6 Gb/s UHDTV, HD-SDI 1080p Construction : RG type 6 Conductor : AWG-18, Stranding- Solid, Nom. Diameter- 0.040", Material- Bare Copper Insulation : Polyethylene (Foam) 0.180" Outer Shield Material : Tape - Tri-Laminate (Alum+Poly+Alum), Duofoil 100% and Braid- Tinned Copper (TC) 95% Outer Jacket Material : Polyvinyl Chloride 0.274" Environmental Suitability: Indoor/Outdoor, Indoor, UV Resistance Sustainability: CA Prop 65 Flammability / Fire Resistance: UL1666 Vertical Shaft, FT4 NEC / UL Compliance: CMR and CEC / C(UL) Compliance: CMG Min. Return Loss [dB]: 5 - 1600 MHz is 23 dB |
| 203 | (87) SITC of Various Cable terminations & connectors etc. complete with installation as per the site requirement |
| 204 | (88) Supply, installation, testing and commissioning of 100 kVA UPS System with following specification. |
| 205 | SYSTEM COMPONENTS: PWM IGBT with high frequency (25 KHz or more) or better Technology. |
| 206 | POWER: On-Line UPS with up-gradability minimum 50% (specify the limit, process and cost implication for expanding the power rating). |
| 207 | PRODUCT CERTIFICATION/TESTING: The product shall have certification from any one of the following - a) ERTL b) ETDC c) SAMEER d) STQC e) I E C f) ISO 9001 |
| 208 | OPERATING TEMPERATURE: 0-40 degree Centigrade |
| 209 | HUMIDITY: Upto 95% |
| 210 | OUTPUT FREQUENCY: 50 Hz +/- 0.01% Hz |
| 211 | WAVE FORM: Pure Sine Wave |
| 212 | TRANSIENT RESPONSE: +/- 1% maximum under following conditions: a) Loss or Return of Input AC supply b) 100% step load |
| 213 | RECOVERY TIME: To nominal voltage in less than 10 milli second. |
| 214 | EFFICIENCY (OVER ALL): The Energy Efficiency requirement of UPS system at 100 Load shall be vary from 91.9% to 93.8% or more |
| 215 | LOAD POWER FACTOR: 0.8 lag to unity as per ECBC |
| 216 | CREST FACTOR: Greater than 3:1 |
| 217 | SWITCH OVER TIME: Zero NOISE: Less than 65 dB at 1 mtr. SWITCHING SPEED: Minimum 2 KHZ INDICATION: Mains ON/OFF, /Battery HIGH/LOW, Battery ON, Inverter ON/TRIP, O/P HIGH/LOW, Battery HIGH/LOW, Alarm for Battery Discharge. PROTECTION: Input - Over/Under voltage, Over Current. Battery - Over/Under Voltage, Over Current, Battery Low Alarm/Trip. Output - Over/Under Voltage, Over Current. Output - Short Circuit Over Temperature DC Over Current CONTROL CIRCUITRY: Microprocessor based control circuitry be provided and all indications will be digitally displayed using microprocessor-based software. METERING: Digital display with multifunctional key panel indicate. Output Voltage/Current DC Voltage/Current Output Frequency COMMUNICATION PORT: RS 232 DIAGNOSIS & CONFIGURATION SOFTWARE: Compatible with Unix/Windows. OUT LOOK: Compact size with aesthetically good look (specify the size and weight) BATTERY: Lead Acid S.M.F. for 15 minutes’ back-up under full load. Battery sizing calculations to be submitted. UPS FAILURE: During failure in the UPS equipment the static switch automatically transfers the A.C. load directly to the AC. line in less than 1/4 cycle so that transfer does not affect critical equipment operation. |
| 218 | MAINTENANCE BY PASS SWITCH: The portion of UPS module used to connect the alternator supply to critical load while electrically isolating static switch and inverter for maintenance purpose. BATTERY DISCONNECT SWITCH: The switch used to electrically isolate the storage batteries from UPS module. STATIC TRANSFORMER SWITCH: The switch senses an inverter shutdown signal or degradation of inverter output item. It shall automatically transfer the loads from one inverter to the alternative AC power without interruption. RE-TRANSFER TO INVERTER: The static transfer switch shall be capable of automatically re-transferring the load back to inverter after the inverter has returned to normal voltage and stabilized for period of time. QUALITY ASSURANCE: The manufacturer shall have quality assurance program with check on incoming parts and final products. A final test procedure for product shall include a check of all performance specifications and a minimum 24 hour running. INSTALLATION DRAWING: After the receipt of order a minimum two sets ofinstallation drawings showing outline dimension, weights and connections and one line drawing of the UPS shall be sent to the purchaser to be used in planning the installation of the system. |
| 219 | PRODUCT DOCUMENTATION: Manufacturer shall supply a comprehensive set of product documentation for: 1. Installation 2. Operation 3. Maintenance This should include complete outline and external connection drawings and schematic and physical wiring diagrams as well as parts list and parts layout down to the smallest components level. It should include start up and service manuals with complete privation and remedial maintenance and trouble showing instructions. This should include all ancillary equipment and accessories. |
| 220 | (89) Supply, installation, testing and commissioning of SMF Batteries for Battery Backup: 15 Minutes using SMF Batteries of (12 V @ 100AH -34 No"s Battery Bank) |
| 221 | (90) Supply, installation, testing and commissioning of MS Rack for battery bank, IRIT/UPS to Battery Cable, Cable- Connector & Accessories. |
| 222 | N.B: The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
