Tender For Tender For Provision Of Equipment Store, Urinal Block, Toughened Glass Door At Haws, Haft Chinar And Jak Li Rc Under Ge 970 Ews, Srinagar-Jammu And Kashmir

Tender For Provision Of Equipment Store, Urinal Block, Toughened Glass Door At Haws, Haft Chinar And Jak Li Rc Under Ge 970 Ews. 1 Surface Excavation N.Exc 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft / Loose Soil Complete All As Specified And Directed. 2 Excavation In Trenches N.Exc 1.50M Wide And N Exc 1.5M Depth For Foundation Or For Shafts, Wells, Etc And Getting Out In Soft / Loose Soil Complete All As Specified And Directed 3 Returning Filling Incl Spreading Leveling Watering And Well Rammings In Layers N Exc 25Cm Complete All As Specified And Directed. 4 Removal Of Surplus Soil N Exc 50M And Depositing Where Dirtected At A Level N Exc 1.5M Above The Starting Point Complete All As Specified And Directed. 5 M&L For Cement Concrete 1:4:8 Type D-2 ( 40Mm Graded Aggregate ) In Foundation, Filling And Mass Concrete Complete All As Specified And Directed. 6 M&L Formwork For Sides Of Concrete Foundations, Footing, Bases Of Columns, Raft And Raft Beams, Sides And Soffits ( If Any ) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed. 7 M&L Formwork For Sides Of Columns Etc And Similar Work; Vertical Or To Batter For Rough Finished Surface Of Concrete Flat Complete All As Specified And Directed. 8 M&Lformwork To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams Etc For Rough Finished Surface Of Concrete Flat Complete All As Specified And Directed 9 M&L For Rcc ( Design Mix ) M-30 ( Using 20Mm Graded Aggregate ) In Foundation, Including Rafts, Footing, Foundation Beams, Plinth Beams; Bases For Columns, Etc. Basement Slabs, Underreamed Piles And Mass Concrete Complete All As Specified And Directed. 10 M&L For Rcc ( Design Mix ) M-30 ( 20Mm Graded Aggregate ) In Columns, Pillers, Peir, Post, And Struts Complete All As Specified And Directed. 11 M&L For Rcc ( Design Mix ) M-30 ( 20Mm Graded Aggregate ) In Beams, Cantilevers, Bressummers, Inlets Over 1.5M Span Complete All As Specified And Directed. 12 Mild Steel Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed. 13 Ditto- All As Per Item No 12 Above But 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spaces And Binders Complete All As Specified And Directed. 14 Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc 6 Mtr Mean Radious Built In Cm 1:6 Complete All As Specified And Directed. 15 Material & Labour For Brick Work With Sub Class B Bricks, Old Size, Straight Or Curved On Plan To Any Radius In Half Thick Brick Wall Built In Cement Mortar ( 1:4 ) Complete All As Specified And Directed. 16 Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc 6 Mtr Mean Radious Built In Cm 1:4 Complete All As Specified And Directed. 17 M&L For Walling Of Random Rubble, Uncoursed, Well Bonded, Bedded And Solidly Hearted, Random Or Polygonal Rubble Walling, Brought Up To Course Built In Cement Mortar 1:6 Complete All As Specified And Directed. 18 M & L For Damp Proof Course To Horizontal Or Vertical Surfaces Including Necessary Formwork, 40Mm Thick, In Cement Concrete 1:2:4 Type B0 Complete All As Specified And As Directed By The Engineer-In-Charge 19 M & L For Applying Evenly A Coat Of Blown Type Bitumen At The Rate Of 1.50 Kg Per Sq. M And Blinding With Clean Dry Sand @ 0.05 Cu. M. Per Sq. M Complete All As Specified And As Directed By The Engineer-In-Charge 20 M & L For Polythene Film, 150 Micron Thick, Laid On A Coat Of Bitumen Primer, @ 0.30 To 0.50 Kg Per Sq. M Complete All As Specified And As Directed By The Engineer-In-Charge 21 Rendering 15Mm Thick On Other Than Fare Faces Of Brick Work Or Concerete Surfacec In Cm 1:6, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed 22 Material And Labour For Rendering 15Mm Thick Plaster In Cement Mortar 1:4 On Fair Faces Of Brick Wall Or On Concrete Surfaces And Finishing The Surface Even And Smooth Without Using Extra Cement All As Specified And Directed. 23 Preparation Of Newly Plastered Surfaces Of Wall And Applying Three Coatsof White Wash Complete All As Specified And Directed. 24 Preparation Of Newly Plastered Surface Of Wall And Applying Two Coats Of Cement Based Paintover A Coat Of Alkali Resistant Primer Complete All As Specified And Directed.. 25 Preparation Of Newly Plastered Surface Of Wall And Applying Two Coats Of Oil Bound Distemperover A Coat Of Chalk Whitening Complete All As Specified And Directed.. 26 4.8Mm Thick Sheet Glass, Ordinary Qualityglazing With Oil Putty In Square N Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed 27 Structural Steel Work For Roof Truses, Purlins, Crane, Gantries, Rails Incl Distance Pieces, Cleats Etc Conforming To Fe 410 ( Gde-E-250 ) Quality B Complete All As Specified And Directed. 28 S&F Rolled Sections As In Main And Cross Beams, Hip And Jack Rafters; Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates ( Fe 410-W ( Gde E-250 ) Quality A ) Complete All As Spd And Directed. 29 Plate ( Plain Or Chequered ) Cut Or Notched ( Ordinary And Counter Sunk ) With Riveted, Bolted Or Welded Attachment Conforming To Fe 410 ( Gde-E-250 ) Quality B Complete All As Specified And Directed. 30 M&L For Mild Steel Screw Bolts ( Machine Made ) 5 To 10Mm Dia Of Neck With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed And To Be Fitted With Washers And One Hexagonal Or Square Nut N Exc 5 Cm Long Complete All As Spd And Directed 31 Preparation Of New Steel Surfaces On Any Description Over 10 Cm In Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. 32 Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Any Colour Having Tensile Strength 550 Mpa As In Roof Coverings / Cladding To Wall, Fixed With Self Tapping Screws Etc Complete All As Specified & Directed. 33 Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Ridge, Hips , Valley Gutters, Drip And Straight Flashing ( Length And Girthas Fixed ) , Fixed With Self Tapping Screws Complete All As Specified & Directed. 34 M & Lanodised Aluminium Snap Grid Frame Work Size Of Grid 605 X 605Mm For False Ceiling All As Specified And Directed 35 M & L For Providing And Fixin Gpsum Board 12Mm Thick In Ceiling Fixed With Screw As Per Manufactures Instructionscomplete All As Specified And Directed 36 M&L For Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing And Including 10Mm Thick Screed Bed Of Cm 1:6 Layer In Floor Finishes Complete All As Spd And Directed. 37 All As Per Item No 36 Above But As In 20-25 Mm Thick Skirting Or Vertical Surfaces Including 10 Mm Thick Rendering In Cement Mortar 1:4, Complete All As Specified And As Directed. 38 M&Lsteel Windows With Side Hung Shutters Including Projecting Type Hinges With Steel Handle, And Steel Peg Stay, Complete With Glazing Bars, Dovetailed Or Weldedcomplete All As Spd And Directed 39 S&F Steel Door Including Projecting Type Hinges, Steel Handle, Complete, With Glazing Bars, Dovetailed Or Welded Complete All As Specified And Directed. 40 200Mm Mild Steel Sliding Door Bolts, Plate Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate And Fixed Complete All As Specified And Directed 41 Steel Locking Bolts With Mild Steel Electrogalvanised Plate And Bright Bolt Not Less Than 10Mm Dia 100Mm Size Complete All As Specified And Directed 42 Galvanised Mild Steel Wire Cloth, 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm And Fixed With Tinned Tacks, Or Galvanised Wire Staples Complete All As Spd And Directed. 43 M&L For Hardcore Of Gauge N Exc. 63Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And Directed. 44 Moorum / Red Bajari Filling In Floor Or Pavings, Laid In Layers N. Exc. 15 Cm Thick, Spread, Levelled And Rammed Including Watering Complete All As Specified And As Directed. 45 75Mm Pcc 1:4:8 Type D2 ( Using 40Mm Graded Aggregate ) As In Sub Base Complete All As Specified And Directed. 46 75Mm Thick Pcc 1:3:6, Type C2 ( 40Mm Graded Aggregate ) As In Plinth Protection Finished Even And Smooth Complete All As Specified And Directed 47 60Mm Thick Machine Pressed Precast Concrete Coloured Interlocking Paver Block Of Required Shape And Size Confirming To Is 15658-2006 Of M-35 Grade With Grey Cement And Pigment Laid Over And Including 25Mm Thick Sand Cushioning Complete All As Specified And Directed. 48 Material & Labour For Pcc ( 1:2:4 ) Type B-0 ( Using 12.5 Mm Graded Stone Aggregate ) As In Lintels Upto 1.5 M Clear Span, Cills, Steps, Seismic And Other Similar Bands Plinth Cources, Roof Kerbs Or Mud Stops, Benching, Coping, Bed Plates, Parapets, Water Throughs And The Like Etc Including Weathering, Slightly Rounded Or Chamfered Angles Throating Etc Complete Including Necessary Form Work Complete All As Specified And Directed. 49 Non-Skid Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Incl 10Mm Thick Screed Bed In Cm 1:4 Complete All As Specified And Directed. 50 Glazed Ceramic Coloured Tile For Vertical Surfaces Of Size 450Mmx300mmx7mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Matched Including 10Mm Thick Backing Coat In Cm 1:3 Complete All As Specified And Directed. 51 Providing Precast Cement Concrete Kerb Stone / Building Blocks ( Size 300Mmx300mmx150mm ) Built In Cement Concrete 1:2:4 Type B-1 ( With Plain Or Interlocking Joints As Directed ) Setting In Cement Mortar 1:4, Complete All As Specified And Directed. 52 75Mm Pvc ( Swr ) Pipe Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Wall Complete All As Specified And Directed. 53 110Mm Pvc ( Swr ) Pipe Single Socketed, In Any Length With Rubber Ring Joints. Laid In Trenches Or In Floors Complete All As Specified And Directed. 54 S & F 110Mm Bore Pvc ( Swr ) Bends Of Any Radius, Complete All As Specified 55 Pvc ( Swr ) Bend Any Radius 75Mm Complete All As Specified And Directed. 56 Pvc ( Swr ) Vent Cowl 75Mm Bore Complete All As Specified And Directed. 57 Floor Trap 75Mm, Plain With Grating Incl Jointing With Solvent Cement Complete All As Specified And Directed. 58 M & L For Pvc ( Swr ) Gully Trap 125 / 110Mm, Setting And Jointing With Solvent Cement Complete All As Specified And As Directed. 59 500 Litre Capacity, Double Layered, Hdpe, Rotational Moulded Polythylene Water Storage Tank, Isi Marked ( Cylindrical Vertical With Closed Top ) Hoisted And Fixed In Position Including Ball Valve High Pressure 20 Mm Bore Of Ptmt With Epoxy Coated Aluminium Rod High Denisty Plastic Ball Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. 60 Stop / Angle Valve 15Mm Bore, Cast Copper Alloy, Cp, Screwed Down High Pressure With Crutch Or Butterfllly Handles, Screwed Both Ends For Iron Pipe Or For Brass Ferrule Or To Gi Socketcomplete All As Specified And Directed. 61 Vitreous China Bowl Urinal Flat Back, Size Of 465 X 355 X 265 Mm White ( Minimum ) , With Waste Fittings, Grating And Union For Discharge Pipe ( Including Flushing Cistern ) Complete All As Specified And Directed. 62 Supply & Fixingvitreus China Wash Basin White Flat Back Size 580X450mm, Excluding Taps, Waste, Chain & Plug And Porcelain Stopper But Including Brackets And Cutting For And Pinning In Ends Of Brackets Or Erecting Stand But Exclusive Of Fixing Of Supply And Waste Pipe, Complete All As Specified 63 Pvc Connections 15Mm Size With Ptmt Nuts Of Length 450Mm Complete All As Specified And Directed. 64 Galvanised Iron Tubes 15Mm Bore, Medium Grade With & Including All Fittings Fixed To Wall, Ceilings Andor Laid In Floors Etc Complete All As Specified And Directed. 65 Galvanised Iron Tubes 20Mm Bore, Medium Grade With & Including All Fittings Fixed To Wall, Ceilings Andor Laid In Floors Etc Complete All As Specified And Directed. 66 20Mm Dia Gun Metal Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipecomplete All As Specified And Directed. 67 M & L For Cutting Into Existing Manholes For Connecting New Drains, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel ( 1 / 2 Round Or 3 / 4 Section ) In Cement Concrete 1:2:4 Type B-1 Smooth Finished, And Reforming Benching As Required For 100Mm Bore Pipe Line Complete All As Specified And As Directed By The Engineer-In-Charge 68 M & L For Concrete Bed To Drain Pipes Of 100Mm Bore, Including Forming Cradles In Cement Concrete 1:3:6 Type C-2 Complete All As Specified And As Directed By The Engineer-In-Charge 69 Point Wiring Using Frls-H Pvc Insulated Unsheathed / Multi Stranded Copper Conductor Cable 1.5 Sqmm Including 1.5 Sqmm Frls-H Pvc Insulated Unsheathed Copper Conductor Earth Wire Drawn Through And Including Concealed Pvc Conduit Of Appropriate Size Not Less Than 20 Mm Dia And 1.8 Mm Thick Including All Fittings Viz Tees, Bend, Junction Box And Pressed Steel Sunken Box 60 Mm Deep & 1.6 Mm Thick Duly Painted Inside And Anticorrosive Out Side For Mounting Switches, Sockets, Fan Regulators Etc With 3Mm Thick Plastic Laminated Sheet Cover Of Suitable Size, Connecting Earth Including Cutting Groove For Concealed Wiring, Making Good To Disturb Surface Of Wall / Floor With Cement Mortar And Finishes To Match Existing Including Connection Of Cable With Mcbs Or Bus Bar Shall Be Done Through Proper Size Copper / Brass Thimble Of Pin / U Type Etc ( Conduitshall Be Fixed On Surface Of Ceiling With Necessary Saddles Where Concealing Of Conduit Is Not Feasible ) , For Light / Fan / Bell Point Etc Complete All As Specified And Directed. ( Note : Switch / Bell Push / Fan Regulator Etc Shall Be Measured And Paid Separately ) 70 All As Per Srl Item No. 69 Above But For 3 Pin 5 Amp Socket Outlet Point Controlled By One Switch 5 Amps One Way On Same Board Complete All As Specified And Directed. 71 Socket Outlet, 2 In 1, 3 Pin, 6 Amp, Flush Type, Ac 230 Volts Etc Complete All As Specified And Directed. 72 Supply And Fixing1x20 W Led 6000K ( 4 Ft Long ) Decorative Ultra Slim Square Prfile Linear Led Lighting Fixture With Extruded Polycarbonate, Environmental Friendly, Energy Efficient, Extruded Aluminium Body Heat Shrink, Provided For Efficient Dissipation And Itegrated Electronic Driver Complete With Lamp Complete All As Specified And Directed. 73 Supply And Fixing 1X10 W Led 6000K ( 2 Ft Long ) Decorative Ultra Slim Square Prfile Linear Led Lighting Fixture With Extruded Polycarbonate, Environmental Friendly, Energy Efficient, Extruded Aluminium Body Heat Shrink, Provided For Efficient Dissipation And Itegrated Electronic Driver Complete With Lamp Complete All As Specified And Directed. 74 Switch Piano Flush Type, Single Pole, 6 Amp, One Way, Ac 230 Volts Etc Complete, All As Specified And Directed. 75 Ceiling Rose Polycarbonate Isolated Body Surface Bakelite, Not Less Than 50X20mm, Three Terminals, Ac 230 Volts Etc Complete All As Specified And Directed. 76 Supply And Fixing Street / Security Light Led , 60 Watt Energy Savings And Environmental Friendly Long Life Versatile Pressure Die Cast Aluminium Fittings Including Necessary Brackets And Clamps Complete Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable With Suitable Size All As Specified And Directed. Make : Bajaj / Philips / Crompton / Wipronote : Ca No Shall Be Written On Each Fitting Before Installation. 77 Sheet Metal Enclosure Db Spn 4 Way 415 V Double Door Complete All As Specified & Directed. 78 Mcb 40 Amps Spn 10 Ka Braking Capacity C Curve Complete All As Specified & Directed. 79 Supply And Fixing Mcb Single Pole ( Sp ) 240 Volts, 6 To 32 Amps, 10Ka ( C-Series ) Of Approved Make And Cat Part Etc Complete All As Specified And Directed. 80 Sand Cushioning To Underground Cables 8Cm Thick Before Laying Cable And 15Cm Thick After Laying And Streching The Cable, Complete All As Specified And Directed..Note :- For Payment Purpose Punned Thickness Shall Be Measured. 81 Brick Well Burnt Locally Available Sub Class B Laid Over Sand Cushioning To Cable In Trenches Keeping Width Of Brick Parallelto The Length Of Cable Complete All As Specified And Directed. 82 1100 Volt Grade Xlpe Insulated Heavy Duty Cable, 25 Sqmm 3.5 Core, Strip Armoured With Aluminium Stranded Conductor Overall Pvc Sheathed Laid In Trenches Complete All As Specified And Directed.Note : Excavation & Earthwork Shall Be Measured And Paid Separately. 83 Material And Labourfor Earthing Complete With Galvanised Steel Earth Plate Electrode 600Mm X 600 Mm X 6Mm Burried Directly In Ground ( Earth Pit Not Less That 2.25 Metre Deep Below Ground Level ) Vertically, With Top Edge Of The Plate Not Less Than 1.50 Mtr Below Normal Ground Level, Connected To Galvanised Iron Strip 32X6mm By Means Of Nuts, Bolts, Washers Of Gi Steel All As Shown On Electrical Plate No 3 Of Mes Schedule Part I Connected To Earthing Test Point And Testing On Completion With And Including Necessary Excavation And Earth Work, Earth Electrode, Earthing Lead From Electrode To Equipment / Substation, Adequate Quantity Of Charcoal Dust And Common Salt, Test Point, Pcc ( 1:3:6 ) Type C-1 ( Using 20Mm Graded Black Trap / Granit / Basalt Stone Aggregate ) For Earth Pit With 40 X 40 X6mm Mild Steel Angle Iron Frame For Cover, Pre Cast Rcc ( 1:2:4 ) Type B-1 ( Using 20Mm Graded Black Trap / Granite / Basalt Stone Aggregate ) 40Mm Thick Cover, Reinforced With 6Mm Dia Bars 3 Nos Both Way With 12Mm Dia Round Bar Handle, Gi Light Grade Watering Pipe 15 Mm Dia With Funnel And Wire Mesh, And 15 Mm Dia Gi Light Grade Earth Lead Protection Pipe, Complete All As Specified And Directed.. 84 Supply And Fixing Of Exhaust Fan 300Mm Sweep, Heavy Duty With Speed Of 900 Rpm, Metal Body, Single Phase With Blades Complete All As Specified And Directed.

INR 500 /-

INR 19000.0 /-

INR 95 Lakhs /-

Name of Work: PROVN OF EQUIPMENT STORE, URINAL BLOCK, TOUGHENED GLASS DOOR AT HAWS, HAFT CHINAR AND JAK LI RC UNDER GE 970 EWS

Sl. No.	Item Description
1	Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
2	Excavation in trenches n.exc 1.50m wide and n exc 1.5m depth for foundation or for shafts, wells, etc and getting out in soft/loose soil complete all as specified and directed
3	Returning filling incl spreading leveling watering and well rammings in layers n exc 25cm complete all as specified and directed.
4	Removal of surplus soil n exc 50m and depositing where dirtected at a level n exc 1.5m above the starting point complete all as specified and directed.
5	M&L for cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.
6	M&L formwork for sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
7	M&L formwork for sides of columns etc and similar work; vertical or to batter for rough finished surface of concrete flat complete all as specified and directed.
8	M&Lformwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc for rough finished surface of concrete flat complete all as specified and directed
9	M&L for RCC (design mix) M-30 (using 20mm graded aggregate) in foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc. basement slabs, underreamed piles and mass concrete complete all as specified and directed.
10	M&L for RCC (design mix) M-30 (20mm graded aggregate) in columns, pillers, peir, post, and struts complete all as specified and directed.
11	M&L for RCC (design mix) M-30 (20mm graded aggregate) in beams, cantilevers, bressummers, Inlets over 1.5m span complete all as specified and directed.
12	Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
13	ditto- all as per item No 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed.
14	Brick work with sub class "B" bricks straight or curved on plan exc 6 mtr mean radious built in CM 1:6 complete all as specified and directed.
15	Material & labour for brick work with sub class "B" bricks, old size, straight or curved on plan to any radius in half thick brick wall built in cement mortar (1:4) complete all as specified and directed.
16	Brick work with sub class "B" bricks straight or curved on plan exc 6 mtr mean radious built in CM 1:4 complete all as specified and directed.
17	M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, random or polygonal rubble walling, brought up to course built in cement mortar 1:6 complete all as specified and directed.
18	M & L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified and as directed by the Engineer-in-Charge
19	M & L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per sq. m and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and as directed by the Engineer-in-Charge
20	M & L for polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and as directed by the Engineer-in-Charge
21	Rendering 15mm thick on other than fare faces of brick work or concerete surfacec in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed
22	Material and labour for rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement all as specified and directed.
23	Preparation of newly plastered surfaces of wall and applying three coatsof white wash complete all as specified and directed.
24	Preparation of newly plastered surface of wall and applying two coats of cement based paintover a coat of alkali resistant primer complete all as specified and directed..
25	Preparation of newly plastered surface of wall and applying two coats of oil bound distemperover a coat of chalk whitening complete all as specified and directed..
26	4.8mm thick sheet glass, ordinary qualityglazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed
27	Structural steel work for roof truses, purlins, crane, gantries, rails incl distance pieces, cleats etc conforming to Fe 410 (Gde-E-250) quality B complete all as specified and directed.
28	S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates ( Fe 410-W (Gde E-250) quality A) complete all as spd and directed.
29	Plate (plain or chequered) cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment conforming to Fe 410 (Gde-E-250) quality B complete all as specified and directed.
30	M&L for mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed and to be fitted with washers and one hexagonal or square nut n exc 5 cm long complete all as spd and directed
31	Preparation of new steel surfaces on any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
32	Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed.
33	Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing (length and girthas fixed), fixed with self tapping screws complete all as specified & directed.
34	M & LAnodised aluminium snap grid frame work size of grid 605 x 605mm for false ceiling all as specified and directed
35	M & L for providing and fixin gpsum board 12mm thick in ceiling fixed with screw as per manufactures instructionscomplete all as specified and directed
36	M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 10mm thick screed bed of CM 1:6 layer in floor finishes complete all as spd and directed.
37	All as per item No 36 above but as in 20-25 mm thick skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.
38	M&LSteel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as spd and directed
39	S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed.
40	200mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed
41	Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed
42	Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as spd and directed.
43	M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
44	Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
45	75mm PCC 1:4:8 type D2 (using 40mm graded aggregate) as in sub base complete all as specified and directed.
46	75mm thick PCC 1:3:6, type C2 (40mm graded aggregate) as in plinth protection finished even and smooth complete all as specified and directed
47	60mm thick machine pressed precast concrete coloured interlocking paver block of required shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified and directed.
48	Material & labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.
49	Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and directed.
50	Glazed ceramic coloured tile for vertical surfaces of size 450mmx300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to matched including 10mm thick backing coat in CM 1:3 complete all as specified and directed.
51	Providing precast cement concrete kerb stone/building blocks (size 300mmx300mmx150mm)built in cement concrete 1:2:4 type B-1 (with plain or interlocking joints as directed) setting in cement mortar 1:4, complete all as specified and directed.
52	75mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.
53	110mm PVC (SWR) pipe single socketed, in any length with rubber ring joints. laid in trenches or in floors complete all as specified and directed.
54	S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified
55	PVC (SWR) bend any radius 75mm complete all as specified and directed.
56	PVC (SWR) vent cowl 75mm bore complete all as specified and directed.
57	Floor trap 75mm, plain with grating incl jointing with solvent cement complete all as specified and directed.
58	M & L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.
59	500 litre capacity, double layered, HDPE, rotational moulded polythylene water storage tank, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including Ball valve high pressure 20 mm bore of PTMT with epoxy coated aluminium rod high denisty plastic ball screwed for iron pipe and fixed complete all as specified and directed.
60	Stop/Angle valve 15mm bore, cast copper alloy, CP, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socketcomplete all as specified and directed.
61	Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with waste fittings, grating and union for discharge pipe (including flushing cistern) complete all as specified and directed.
62	Supply & fixingvitreus China wash basin white flat back size 580x450mm, excluding taps, waste, chain & plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified
63	PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
64	Galvanised iron tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings andor laid in floors etc complete all as specified and directed.
65	Galvanised iron tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings andor laid in floors etc complete all as specified and directed.
66	20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipecomplete all as specified and directed.
67	M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line complete all as specified and as directed by the Engineer-in-Charge
68	M & L for concrete bed to drain pipes of 100mm bore, including forming cradles in cement concrete 1:3:6 type C-2 complete all as specified and as directed by the Engineer-in-Charge
69	Point wiring using FRLS-H PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS-H PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and pressed steel sunken box 60 mm deep & 1.6 mm thick duly painted inside and anticorrosive out side for mounting switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet cover of suitable size, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduitshall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible),for light/fan/bell point etc complete all as specified and directed. (Note : Switch/bell push/fan regulator etc shall be measured and paid separately)
70	All as per Srl item No. 69 above but for 3 Pin 5 Amp socket outlet point controlled by one switch 5 Amps one way on same board complete all as specified and directed.
71	Socket outlet, 2 in 1, 3 pin, 6 Amp, flush type,AC 230 volts etc complete all as specified and directed.
72	Supply and fixing1x20 W LED 6000k (4 ft long) decorative ultra slim square prfile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and itegrated electronic driver complete with lamp complete all as specified and directed.
73	Supply and fixing 1x10 W LED 6000k (2 ft long) decorative ultra slim square prfile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and itegrated electronic driver complete with lamp complete all as specified and directed.
74	Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed.
75	Ceiling rose polycarbonate isolated body surface Bakelite, not less than 50x20mm, three terminals, AC 230 volts etc complete all as specified and directed.
76	Supply and Fixing Street/Security light LED , 60 Watt energy savings and environmental friendly long life versatile pressure die cast aluminium fittings including necessary brackets and clamps complete connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make : Bajaj/Philips/Crompton/ Wipro Note : CA No shall be written on each fitting before installation.
77	Sheet metal enclosure DB SPN 4 Way 415 V double door complete all as specified & directed.
78	MCB 40 Amps SPN 10 KA braking capacity C curve complete all as specified & directed.
79	Supply and Fixing MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) of approved make and cat part etc complete all as specified and directed.
80	Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed.. Note :- For payment purpose punned thickness shall be measured.
81	Brick well burnt locally available sub class "B" laid over sand cushioning to cable in trenches keeping width of brick parallelto the length of cable complete all as specified and directed.
82	1100 volt grade XLPE insulated heavy duty cable, 25 sqmm 3.5 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.
83	Material and labourfor Earthing complete with galvanised steel earth plate electrode 600mm x 600 mm x 6mm burried directly in ground (earth pit not less that 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to galvanised iron strip 32x6mm by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/ substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granit/Basalt stone aggregate) for earth pit with 40 x 40 x6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 15 mm dia GI light grade earth lead protection pipe, complete all as specified and directed..
84	Supply and Fixing of exhaust fan 300mm sweep, heavy duty with speed of 900 rpm, metal body, single phase with blades complete all as specified and directed.