SECONDARY LATERAL DAMPER FOR FIAT BOGIES WITH AIR SPRING-(QR Code as perCDE/RCF Letter No. MD44121 DT. 24.11.2021.), as per Drawing: RDSO/CG/DRG/21049 ALT.1, PackingInstruction: 1. EACH DAMPER TO BE PROPERLY WRAPPED IN BIODEGRADABLE TRANSPARENTPLASTIC SHEET SEPARATELY AND SEPARATED WITH CORRUGATED PAPER SO THAT IT SHOULDNOT RUB DURING TRANSPORTATION. 2. THE PACKING SHALL BE SUCH THAT ITS SURFACE SHALLBE PROPERLY PROTECTED AGAINST RUBBING /IMPACT/SCRATCHES WITH EACH OTHER WITH ANYMODE OF TRANSPORTATION I.E WAGON/TRUCK/TRAILERS ETC. 3. THE DAMPER TO ANY ABOVESAID PL NO. SHOULD BE PACKED IN 08 NOS IN AN IRON BOX PALLET PREPARED BY FIRM SUITABLEFOR SAID ITEMS. THE ITEMS SHOULD BE SEPARATED BY USING SUITABLE ECO FRIENDLYCUSHIONING MATERIAL TO AVOID RUBBING. THE PACKING SHALL BE SUCH THAT TRANSITDAMAGE IF ANY SHALL BE AT THE COST OF SUPPLIER TILL UNLOADING IN SHELL DEPOT. 4. EACHPACKING SHOULD HAVE AN IDENTIFICATION SHOWING P.O. NO., PL NO. DESCRIPTION, DRAWINGNO./SPEC., QUANTITY, FIRMS NAME & ADDRESS AND DISPATCH DETAIL ETC. NOTE:- IRON BOXPALLET SHALL BE RETURNED TO FIRM WHEN EMPTY IF AGREED BY RESPECTIVE DEPOTS. 5. INADDITION TO THIS, THE FOLLOWING INSTRUCTIONS CAN BE CONSIDERED TO BE ADDED TO THEPACKING INSTRUCTIONS FOR ENSURING PROPER IDENTIFICATION AND LINKAGE OF THE ITEMSAGAINST THE PURCHASE ORDERS:- 5.1 THE ITEM AND ITS PACKING SHALL CARRY A QR CODESTICKER CONTAINING THE DETAILS AS LISTED BELOW:- A. NAME OF THE MANUFACTURE B. PURCHASE ORDER NUMBER C. PURCHASE ORDER DATE D.UNIQUE SERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER OR E. DATE OF MANUFACTURE F. DELIVERY CHALLANNO. G. DELIVERY CHALLAN DATE 5.2 THE QR CODE SHALL BE AS PERISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILEDABOVE. 5.3 IN CASE THE ABOVE DETAILS ARE NOT AVAILABLE OR THE QR CODES ARE NOTREADABLE, THE SUPPLIED MATERIAL IS LIABLE TO BE REJECTED.
3
PRIMARY VERTICAL DAMPER-(QR Code as per CDE/RCF Letter No. MD44121 DT.24.11.2021.), as per Drawing: RDSO/CG/DRG/21047 ALT.1, Packing Instruction: 1. EACH DAMPER TO BEPROPERLY WRAPPED IN BIODEGRADABLE TRANSPARENT PLASTIC SHEET SEPARATELY ANDSEPARATED WITH CORRUGATED PAPER SO THAT IT SHOULD NOT RUB DURINGTRANSPORTATION. 2. THE PACKING SHALL BE SUCH THAT ITS SURFACE SHALL BE PROPERLYPROTECTED AGAINST RUBBING /IMPACT/SCRATCHES WITH EACH OTHER WITH ANY MODE OFTRANSPORTATION I.E WAGON/TRUCK/TRAILERS ETC. 3. THE DAMPER TO ANY ABOVE SAID PL NO.SHOULD BE PACKED IN 08 NOS IN AN IRON BOX PALLET PREPARED BY FIRM SUITABLE FOR SAIDITEMS. THE ITEMS SHOULD BE SEPARATED BY USING SUITABLE ECO FRIENDLY CUSHIONINGMATERIAL TO AVOID RUBBING. THE PACKING SHALL BE SUCH THAT TRANSIT DAMAGE IF ANYSHALL BE AT THE COST OF SUPPLIER TILL UNLOADING IN SHELL DEPOT. 4. EACH PACKINGSHOULD HAVE AN IDENTIFICATION SHOWING P.O. NO., PL NO. DESCRIPTION, DRAWING NO./SPEC.,QUANTITY, FIRMS NAME & ADDRESS AND DISPATCH DETAIL ETC. NOTE:- IRON BOX PALLET SHALLBE RETURNED TO FIRM WHEN EMPTY IF AGREED BY RESPECTIVE DEPOTS. 5. IN ADDITION TOTHIS, THE FOLLOWING INSTRUCTIONS CAN BE CONSIDERED TO BE ADDED TO THE PACKINGINSTRUCTIONS FOR ENSURING PROPER IDENTIFICATION AND LINKAGE OF THE ITEMS AGAINSTTHE PURCHASE ORDERS:- 5.1 THE ITEM AND ITS PACKING SHALL CARRY A QR CODE STICKERCONTAINING THE DETAILS AS LISTED BELOW:- A. NAME OF THE MANUFACTURE B.PURCHASE ORDER NUMBER C. PURCHASE ORDER DATE D. UNIQUE SERIALNUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER OR E. DATE OF MANUFACTURE F. DELIVERY CHALLAN NO. G. DELIVERY CHALLAN DATE 5.2 THE QR CODE SHALL BE AS PER ISO/IEC 18004MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. 5.3 INCASE THE ABOVE DETAILS ARE NOT AVAILABLE OR THE QR CODES ARE NOT READABLE, THESUPPLIED MATERIAL IS LIABLE TO BE REJECTED.
4
SECONDARY VERTICAL DAMPER-(QR Code as per CDE/RCF Letter No. MD44121 DT.24.11.2021.), as per Drawing: RDSO/CG/DRG/21046 ALT.1, Packing Instruction: 1. EACH DAMPER TO BEPROPERLY WRAPPED IN BIODEGRADABLE TRANSPARENT PLASTIC SHEET SEPARATELY ANDSEPARATED WITH CORRUGATED PAPER SO THAT IT SHOULD NOT RUB DURINGTRANSPORTATION. 2. THE PACKING SHALL BE SUCH THAT ITS SURFACE SHALL BE PROPERLYPROTECTED AGAINST RUBBING /IMPACT/SCRATCHES WITH EACH OTHER WITH ANY MODE OFTRANSPORTATION I.E WAGON/TRUCK/TRAILERS ETC. 3. THE DAMPER TO ANY ABOVE SAID PL NO.SHOULD BE PACKED IN 08 NOS IN AN IRON BOX PALLET PREPARED BY FIRM SUITABLE FOR SAIDITEMS. THE ITEMS SHOULD BE SEPARATED BY USING SUITABLE ECO FRIENDLY CUSHIONINGMATERIAL TO AVOID RUBBING. THE PACKING SHALL BE SUCH THAT TRANSIT DAMAGE IF ANYSHALL BE AT THE COST OF SUPPLIER TILL UNLOADING IN SHELL DEPOT. 4. EACH PACKINGSHOULD HAVE AN IDENTIFICATION SHOWING P.O. NO., PL NO. DESCRIPTION, DRAWING NO./SPEC.,QUANTITY, FIRMS NAME & ADDRESS AND DISPATCH DETAIL ETC. NOTE:- IRON BOX PALLET SHALLBE RETURNED TO FIRM WHEN EMPTY IF AGREED BY RESPECTIVE DEPOTS. 5. IN ADDITION TOTHIS, THE FOLLOWING INSTRUCTIONS CAN BE CONSIDERED TO BE ADDED TO THE PACKINGINSTRUCTIONS FOR ENSURING PROPER IDENTIFICATION AND LINKAGE OF THE ITEMS AGAINSTTHE PURCHASE ORDERS:- 5.1 THE ITEM AND ITS PACKING SHALL CARRY A QR CODE STICKERCONTAINING THE DETAILS AS LISTED BELOW:- A. NAME OF THE MANUFACTURE B.PURCHASE ORDER NUMBER C. PURCHASE ORDER DATE D. UNIQUE SERIALNUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER OR E. DATE OF MANUFACTURE F. DELIVERY CHALLAN NO. G. DELIVERY CHALLAN DATE 5.2 THE QR CODE SHALL BE AS PER ISO/IEC 18004MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. 5.3 INCASE THE ABOVE DETAILS ARE NOT AVAILABLE OR THE QR CODES ARE NOT READABLE, THESUPPLIED MATERIAL IS LIABLE TO BE REJECTED.
5
YAW DAMPER-(QR Code as per CDE/RCF Letter No. MD44121 DT. 24.11.2021.), as perDrawing: RDSO/CG/DRG/21048 ALT.1, Packing Instruction: 1. EACH DAMPER TO BE PROPERLYWRAPPED IN BIODEGRADABLE TRANSPARENT PLASTIC SHEET SEPARATELY AND SEPARATEDWITH CORRUGATED PAPER SO THAT IT SHOULD NOT RUB DURING TRANSPORTATION. 2. THEPACKING SHALL BE SUCH THAT ITS SURFACE SHALL BE PROPERLY PROTECTED AGAINSTRUBBING /IMPACT/SCRATCHES WITH EACH OTHER WITH ANY MODE OF TRANSPORTATION I.EWAGON/TRUCK/TRAILERS ETC. 3. THE DAMPER TO ANY ABOVE SAID PL NO. SHOULD BE PACKED IN08 NOS IN AN IRON BOX PALLET PREPARED BY FIRM SUITABLE FOR SAID ITEMS. THE ITEMSSHOULD BE SEPARATED BY USING SUITABLE ECO FRIENDLY CUSHIONING MATERIAL TO AVOIDRUBBING. THE PACKING SHALL BE SUCH THAT TRANSIT DAMAGE IF ANY SHALL BE AT THE COSTOF SUPPLIER TILL UNLOADING IN SHELL DEPOT. 4. EACH PACKING SHOULD HAVE ANIDENTIFICATION SHOWING P.O. NO., PL NO. DESCRIPTION, DRAWING NO./SPEC., QUANTITY, FIRMSNAME & ADDRESS AND DISPATCH DETAIL ETC. NOTE:- IRON BOX PALLET SHALL BE RETURNED TOFIRM WHEN EMPTY IF AGREED BY RESPECTIVE DEPOTS. 5. IN ADDITION TO THIS, THE FOLLOWINGINSTRUCTIONS CAN BE CONSIDERED TO BE ADDED TO THE PACKING INSTRUCTIONS FORENSURING PROPER IDENTIFICATION AND LINKAGE OF THE ITEMS AGAINST THE PURCHASEORDERS:- 5.1 THE ITEM AND ITS PACKING SHALL CARRY A QR CODE STICKER CONTAINING THEDETAILS AS LISTED BELOW:- A. NAME OF THE MANUFACTURE B. PURCHASE ORDERNUMBER C. PURCHASE ORDER DATE D. UNIQUE SERIAL NUMBER (OR LOTNUMBER FOR BULK ITEMS) OF THE MANUFACTURER OR E. DATE OFMANUFACTURE F. DELIVERY CHALLAN NO. G. DELIVERY CHALLANDATE 5.2 THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATASHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. 5.3 IN CASE THE ABOVE DETAILSARE NOT AVAILABLE OR THE QR CODES ARE NOT READABLE, THE SUPPLIED MATERIAL IS LIABLETO BE REJECTED.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
