Central Electronics Limited-CEL has published Tender For Replacement Of Hard Reset Type Universal Axle Counter Based Bpac With Ufsbi Type Of Bpac In Jrc-Ptkc Section Of Firozpur Division. Submission Date for this Tender is 13-04-2023. Railway Ancillaries Tenders in Ghaziabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply of Relay AC immune, plugin type, style QNA1, DC neutralline 24VDC, 8F/8B contacts. Front and back contacts metal to carbon with plug board, retaining clip and connectors conforming to BRS-931A,IRSS60/78,IRSS34/68andIRS-S- 23/88orlatest(asapplicable). The interlocking code for this unit shall be ABDGH or latest |
| 2 | Supply of VF transformers, impedance ratio 470:600 as per spec.no. IRS/TC/22/2021version1.1 or latest if any procured from RDSO approved Vendors only |
| 3 | Supply of electric fuse complete with fuse block made of PBT for Railway signaling as per IRS-S- 75/2006 (Rev.2) or latest, fuses non-deteriorating type low voltage to suit Specn. No. IRS:S-78/92 or latest, 2Amp/4 Amp/16Amp/630mAfusesin ratio of 60:20:10:10. Fuse block shall be suitable for round head type fuses. |
| 4 | Supply of ARA terminal block 25mm center small M- 6terminal made of PBT as per RDSO drg.no.SA- 23741-A(alt-4) & spec.no. IRS-S-75/2006(Rev:2) or latest. |
| 5 | Supply of terminal block 8 way made of PBT (Isolatingtype)conformingto RDSOdrg.no.SA- 24811(Alt.2) and spec.no. IRS-S-79/92 (amd.2 or latest). |
| 6 | Supply and testing of DC-DC converter 24-32V/5Amps of IPS (HBL,StatconorAmaraRajamake) as per RDSO specification no. RDSO/SPN/165/2012Ver.3.0 or latest if any.. |
| 7 | Supply of apparatus case Large with "E" type lock and key ward no.42 and handle as per RDSO Drg. no. RDSO/S-11500 |
| 8 | Supply of apparatus case steel Medium with E type lock and key wardno.42 and handle as per RDSO Drg.no. RDSO/S-11507. |
| 9 | Supply of Power wire 1X16sq.mm(Red and Black in color) conforming to IS2465/1984 & IS694/1990 or latest. |
| 10 | Supply of PVC Insulated Railway Signalling Indoor Multi Core Cable (60x1.0sqmmDia)as PerRDSOspecificationNo.IRS-S-76/89(amd.3)Or Latest. |
| 11 | Supply of Auto media change over of Modems suitable to work with UFSBI as per specification RDSO/SPN/147/2005 or latest working on redundant channel for data transmission on OFC/Quad cable/Microwave radio (any 2 media) |
| 12 | Supply and making of Thermo-shrinkable straight through joint using jointing kit complete for under ground 6 quad cable with complete accessories as per RDSO specification no. IRS: TC 77-2012, Rev. 3, Amendment 1, 2 & 3 or latest if any. This shall be done as per instructions of site engineer at site. This included Excavation of jointing pit and materials needed for making a joint |
| 13 | Supply and installation of thermo-shrink jointing kit for 6 quad PIJF cable as per RDSO spec. No.IRS:TC77/2012(Rev.3.0) with Amdt.-1&2&3 or latest and provision of derivation joints with the help of thermo-shrink jointing kit. This includes excavation of jointing pit and all materials required for making a joint as per instructions by Railway Engineer at site. |
| 14 | Supply of material to construct a maintenance free earth consisting of multiple pits using copper coated steel rods, compression couplers, RDSO approved earth enhancing compound and exothermic welding as per RDSO specification no. RDSO/SPN/197Version1.0. This includes earth electrodes – 2 Nos., coupler- 01No.,Earth enhancing compound of 30Kg bags- 01No., coppertapes-03Nos. |
| 15 | Supply of insulated cadmium bronze cable of 3/16" conforming to RDSO spec.No.IRS:S103-2004. With latest amendments to connect equipment bus bar in relay room and earth electrodes in pair for redundancy. |
| 16 | Supply and routing of Multi-strand single core PVC insulated copper cable as per IS 694:2010 of 16 sq.mm for connecting various equipments and lightening protection devices to equipotential earth bus bar. |
| 17 | Supply and fixing of G.I Pipe 75mm dia, 3 mm thick, ISI mark as per spcn. no. IS:1239 (Part-I) or latest if any, medium grade, perforate data distance of 20cm or less of required length at culverts/bridges/along the cuttings, suitably concreted at both ends as per drg. no. NR/S&T/CON/1.4/97 or latest. G.I. clamps of M.S. flats bolts and nuts to be supplied by the contractor .G.I. pipe and other associated material |
| 18 | Supply and installation of 20 pair DP boxes & termination of cables as per specifications and drawings stipulated in the tender documents. This includes fixing of same on 1" thick board of size as per direction of site engineer with grouted nuts and bolts of suitable size and pipe fixed with clamps on pole/wall. All materials required for the fixing and termination including salwood/hylum board and the hardware required for Fixing will be supplied by the contractor |
| 19 | Supply,installationandcommissioning of maintenance free separate earthing kit as per RDSO spcn. no. RDSO/SPN/197 Ver. 1.0 or latest and drg. no. SDO/RDSO/E&B/002 dated 19.09.2008 or latest. Basic earthing kit-1 set consisting of [a]The earth electrode shall be UL listed and of minimum 17.0mm diameter and minimum 3 Meter long and minimum copper bonding thickness shall be of 250 microns of 99.9% electrolyte grade copper.-01nos. [b] earth enhanching compound RDSO approved insealed bags of 10kgs each-03nos. minimum [c] SEEB 150mmx25mmx6mm-01No.[d]MEEB 300mmx25mmx6mm-01no.[e]35sq.mm.coppercable to connect earth electrode to MEEB-15mtrs approx. and all other materials and cables required for installation. Work to be carried out in supervision of Consignee |
| 20 | Supply and installation of earth electrodes pipe of 3 mtrs length and 50 mm dia. pointed on lowerend by tapering for a length of 150 mm and connecting with lightening arrester or signaling gears as per std.Practice. The item includes digging of pit in earth, 3 Mtrs. Deep and fixing earth electrode pipe in it. Earth pipeshall be buried in the ground to the length of 2.7 mtrs. after welding 6 SWG wire at lower end and fixing throughnut and bolt at top. Casting of cement of Cement concrete enclosures as per drg. No. NR/S&T/CON/6.4/97. The soil treatment shall be done as per std. pratice. The item includes provision of earth lead wires/mild steel flat and soldering of lead wires. The other end of the earth wire/mild steel flat to be connected to block instrument mild steel flat, cable sheath of power equipment, apparatus case, relay racks, other equipments as per the instruction of Engr. at site & IRSEM. Complete materials such as earth electrodes as per drg. No. NR/S&T/CON/6.3/97,cement,wiring material,soldering material, mild steel flat, earth lead wires6SWG and soldering of lead wires etc. To be supplied by the contractor. |
| 21 | Supply and laying of 2nd class bricks in the trench and laying as per drg.No.NR/S&T/CON/1.1/97-A and as per instructions of the site Engineer. |
| 22 | Supply & installation of Double walled corrugated HDPE Pipe of outer dia120mm(other than black in colour) (in 6m straight length with one coupler for every 6m length) conforming to RDSO SPECIFICATION No. RDSO/SPN/204/2011 Version 1.1 wherever required as per approved cable route plan. This includes brick work and other arrangements required to secure the pipe as per specifications, drawings and stipulations of tender documents & as per approved cable route plan including road crossing/platform/track crossing & for bridge sand Culverts etc. |
| 23 | Installation, testing, wiring and commissioning of HASSDAC as per RDSO spcn.No.RDSO/SPN/177/2012 (Ver. 3.0 or latest) complete. The axle counter will be of high availability single section type with two detector points anditis possible to install it without trolley protection track circuit. Installation to bed one by OEM or RDSO approved source as per the installation manual. The wire and other materials shall be arranged by the contractor at site. It involves following-(a)Mounting of Track side digital axle counterunit-2 Nos. (b)Fixing of vital relays etc.duly wired-2Nos. (c)Clamp with deflector plates and hardware for mounting of sets of 2set Tx & Rx coils. (d) Resetting arrangement of each axle counter. (e) All the wiring material required for installation shall be arranged by the contractor. (f) This also includes integration with Existing SGE/Token-less Block instruments required as per instructions of the site engineer. |
| 24 | Boring & trenchless, cabling along with supply and insertion of Double walled corrugated HDPE self lubricated pipe as per RDSO spec. no. RDSO/SPN/SPN/204/2011 ver.1.1 and amendment 1 or latest with 90mmoutside dia. and 67mm minimum inside dia. in the bore for laying of signaling/telecom/power cables under thetrack/road. The following required coupling arrangement should also be supplied: 1. Suitable snap fit couplers with rubber Oring 2. Spacers 3.Tees 4.Bend 5.Endcapetc. to be supplied along with the pipe. Work at site shall be Inspected by Site engineer & DWC HDPE pipe and associated material |
| 25 | Wiring of relays in relay room/relay huts as per approved wiring diagrams. All material required including indoor cables and wires of 1x1, 1x0.6, 3/0.29, 16/0.2, 40x0.6,40x1, 60x0.6, 60x1 dia. Of copper conductor as per NR practice conforming to IRS specifications, resistance and condensers are to be supplied by the contractor. This also includes wiring from CT rack to tag block ,tag block to relays & wiring off use etc. required in connection with relay room/relay hut wiring and soldering, dressing, bunching, lacing, fixing of relay bases etc. and provision of LED indication of vital relays in relay room and provision of potential free contacts for relays on tag block for data logger as per instruction of site Engineer. This also includes dressing, bunching, lacing and Fixing of relay bases. Indoor cable/wires should be pre- inspected. |
| 26 | Excavating and refilling of trench in Normal Soil to the level of ground with rammed earth as perdrg.No.NR/S&T/CON/1.1/97-A or latest so as not to form a drain0.3Mtrs. Wide & 1Mtr. Deep on both side of the station alongside the track. It shall conform to the safe distance as per signalling and cable plan. It also includes clearance of routes of trees & bushes. Lesser depth due to site conditions shall be paid proportionately After obtaining prior approval from not below than JAG officer. |
| 27 | Laying of signalling/telecom/powercables by unwinding cables from drums of different sizes as per drg. no. NR/S&T/CON/1.1/97 or latest and as per cable route plan approved by the railways. Meggering of cable before and after its laying of all types of cables. Meggering to bed one for each drum separately. Meggering sheets to be supplied and filled up by contractor and submitted to railways. |
| 28 | Casting, concreting and curing of foundation and erection of App. Cases large as per drg. No.NR/S&T/CON/2.7/97 or latest. All materials such as cement, sand, aggregate and anchor bolts shall be supplied by the contractor. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. (All concrete work must be ratio of cement, coarse sand and aggregate1:3:6). |
| 29 | Casting, concreting and curing of foundation and erecting of App. Cases Medium as per drg. no.NR/S&T/CON/2.8/97 or latest. All materials such as cement, sand, aggregate and anchor bolts shall be supplied by the contractor. Contractor is required to execute all types of repair works of foundations if required during insertion of cable for termination. (All concrete work must be ratio of cement, coarse sand and aggregate1:3:6). |
| 30 | Preparation of App. Case Large involving wiring of relays. Work involves following: Preparation & fixing of Bakelite hylum sheet 910x800x6mm and teak wooden shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts & bolts. Fixing of fuses, ARA terminal, shelf type Q series relays and other type relays on square bars, fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank & all cable entry points on location boxes, location huts, JB"s relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS specn.,non deteriorating type HRC fuses, bases, nuts and bolts and other items shall be supplied by the contractor. Relays, ARA terminals only shall be supplied by the railways |
| 31 | Preparation of App. Case Large not involving wiring of relays. This involves following: Preparation & fixing of Bakelite hylum sheet 910x800x6mm and teak woodenshelf900mmx450mmx25mm duly fixed by angle iron piece of different size inside all the app.Cases. Hylumboard shall be fixed on an angle iron frame of 25mmx25mm x 3mm. Angle iron frame will be fixed in location boxes secured by nuts & bolts. Fixing of fuses, ARA terminal shelf type Q series relays and other type relays on square bars fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwoodplank & all cable entry points on location boxes, location huts, JB"s relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hardwood shelf, hylumboard, salwoodplank, angle iron square bar, wire and wiring material as per the IRS specn., non-deteriorating type HRC fuses, bases,nuts and bolts and other items shall be supplied by the contractor .Relays, ARA terminals only shall be supplied by the railways. |
| 32 | Preparation of App. Case half not involving wiring of relays which includes following-(i) Preparation and fixing of Bakelite hylum sheet 450x800x6mm and teak wooden shelf 450x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of25mm/25mm/3mm. Angle iron frame will be fixed in location box secured by nuts & bolts. (ii)Fixing of fuse ARA terminal, shelf type Q series relays and other type of relays on square bars, fixingand jamming of cable with 2inch thick salwood plank provided at the bottom. This will include opening, twisting and jamming armor of each cable in the hole drilledseparatelyforeachcablethroughthe salwood plank and of cable entry points on location boxes, location nuts JB"s relays room battery/room to be closed with suitable masonry work covered with sand & plastering. (iii)Wiring description for terminal,drawingofcircuitsinsideapp.Case. Painting from outside as well inside with RED oxide aluminumpaintiscoveredseparately.Sizeof lettering as per instructions of Engr. at site.(iv)All material including teak wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS spec. Non deteriorating type HRC fuses and bases nuts and bolts and other items shall be Supply by the contractor. Relays, ARA terminals only shall be supplied by the railways |
| 33 | Installation, testing and commissioning of Auto media change over of Modems suitable to work with FSBI as per specification RDSO/SPN/147/2005 or latest working on redundant channel for data transmission on OFC/Quad cable/Microwave radio(any2media). |
| 34 | Excavating and refilling of trench 0.3 Mtrs. wide & 1 Mtr. deep from bottom of rail flange across the track or 0.5 mtr. from ground level whichever is more as per Drg. No.NR/S&T/CON/1.2/97. Earth should be rammed so as not to form a drain. This includes removal and refilling of ballast and restoration of surface to original condition under normal traffic conditions. One metre shall be measured from the bottom of rail flange. |
| 35 | Excavating and refilling of trench 0.3 Mtrs. wide & 1 Mtr. deep on pitched/stone/bricks paved surface, road, crossing/platform etc. and restoring the surface to its original conditions. Lesser depth due to site conditions shall be paid proportionately after obtaining prior approval from not below than JAG officer |
| 36 | Earth work of excavation and refilling around location boxes, signals and other signaling structures etc. wherever necessary including 50 m lead and 1.5 m lift by excavation. The lead be measured from the center of gravity of excavation to the center of filling and the lift, from means ground level. The earth shall be rammed including breaking ofclods, leveling and dressing. The earth work around the location/junction boxes shall be upto the plaster leve land for width sufficient for the maintainer to attend the box both from front & back side. |
| 37 | Concreting unscheduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement, sand ratio. It also includes excavation of earth as required at site and as per instruction of site engineer. The volume in cubic meters shall include the volume occupied by any CI foundation, trestle, MS angle or flator GI pipe required to be embedded in the casting. cement, coarse sand and aggregate 25mm are to be supplied by the contractor.. |
| 38 | Bricks work with well burnt bricks in foundation and plinths with cement and sand mixture of 1:4 ratio. All material is to be supplied by the contractor. |
| 39 | Dismantling and releasing of Block instruments Single/Double line which includes releasing of Terminalboards,relays,terminals,batteries, chargers etc. And other concerned fittings and transportingto the store of respective Consignee(SSE/Signal/S&E) |
| 40 | Installation, testing and commissioning of block provingwithdigitalaxlecounterasperRDSO specification no. IRS: S-105/2012 using UFSBI and block panel for double line operation. Wiring material (16*0.02mm flexible wire etc.) and any other signaling materialforinstallationandcommissioningof system shall be supplied by the contractor. The installation activity will be considered complete only afterworkhasbeen madefunctionaltothe satisfaction of the site engineer. Installation, testing and commissioning to be done by OEM or RDSO approved source as per the installation manual and precommissioning check list should also be duly Signed by OEM, contractor and Railway. |
| 41 | Installation and commissioning of maintenance freering earth as per RDSO specn.no. RDSO/SPN/197 Version 1.0 or latest if any. All the consumables for mounting the copper tape inside the relay room, exothermic weld materials and tools and fixtures for the welding copper tapes and electrodes etc. shall be arranged by the contractor. Installation is to be accrued out by the OEM & certificate regarding earth value less than 1 ohm is required from OEM |
| 42 | Installation of VF transformers with suitable fixtures, 32-way link panel with U-links(2sets/stn) and wiring. (Supply of all fixtures and other associated material for installation shall be done by contractor) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
