Tender For Supply, Installation And Commissioning Of Refrigerated Benchtop Orbital Lighted Incubator Shaker, trombay-Maharashtra

Supply, Installation And Commissioning Of Refrigerated Benchtop Orbital Lighted Incubator Shaker , Refrigerated Benchtop Orbital Lighted Incubator Shaker The Benchtop Shaker Model Should Have Maximum External Dimensions Of ( W X D X H ) 570 X 702 X 915 Mm And Internal Dimensions Of 500 X 490 X 425 Mm Weighing Not More Than 125 Kg And Have A Minimal Footprint Less Than Or Equal To 0.26 M2. ? The Speed Range Of The Shaker Should Be 30-350 Rpm With A Maximum Accuracy Of + / -2 Rpm Deviation From The Set Value. ? The Shaker Should Have Dc Motor With Permanent Magnet Drive Connected With Timer Pulley. ? Triple Eccentric Pin With Counter Balance Mechanism Incorporated Movement Must Be Provided In The Shaker And Mounted On Three Permanently Lubricated Bearings Fitted With Housing To Ensure Non Deviated Amplitude Of 26 Mm. ? Rpm Indictor Should Be Digital. ? Incubation Temperature Range Should Be 15°C To 60°C Having Accuracy Of ±0.1°C In 37°C. ? Platinum Tipped Grade 100 Temperature Sensor Should Be Present. ? The Shaker Should Have Pid Based Microprocessor Controller With Digital Indication. ? Heater Power: 500 W Finned Heater. ? The Shaker Should Have Soft Key Pad For Temperature Control With Visual And / Or Audio Alarm For Temperature Over / Under Shoot. ? The Shaker Should Possess Built In Surge Protection Equipped Temperature Control To Prevent Control Parameter Deviations During Power Fluctuations. ? The Shaker Should Have Universal Tray Of Size 420 X 420 Mm Capable To Accommodate Flasks As Follows: 36 Nos. Of 100 Ml Capacity, 25 Nos. Of 250 Ml Capacity, 16 Nos. Of 500 Ml Capacity, 9 Nos. Of 1000 Ml Capacity Or 4 Nos. Of 2000 Ml Capacity. ? Tray For Stationary Incubation Of Plates And Cultures Should Be Included. ? The Shaker Should Also Accommodate 2 Litre Erlenmeyer Flask. ? The Shaker Should Be Made Of Galvanized And Powder Coated Steel. ? Photosynthetic Light Bank Should Be Included. ? The Shaker Should Be Internally Illuminated With An Intensity Of 5000 Lux And Must Also Include A Timer. ? Electrical Power Requirement Of 230 V, 16 A, Single Phase, 50 Hz.

Refer document

Refer document

Refer document