Military Engineer Services-MES has published Tender For Certain Br Repairs Replacement Works In Officers Mess Single Living Accommodation And Certain Br Repairs And Flooring In Omqs And Otms In Domestic Area At Af Stn Tezpur Under Ge Af Tezpur. Submission Date for this Tender is 06-04-2023. Catering Service Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for,complete all as directed. |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sq. M each, complete all as directed. |
| 3 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed. |
| 4 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each,complete all as directed. |
| 5 | Refixing in same opening,shutters of any description exceeding 1.00 Sq M but not exceeding 2.00 Sq M each,complete all as specified and directed. |
| 6 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as directed. |
| 7 | Materials and Labour for plain cement concrete (1:5:10) type E2 using 40 mm graded aggregate in filling of sunken floors, including demolition of existing cement concrete (un reinforced), complete all as specified and directed. |
| 8 | Materials and Labour for plain cement concrete (1:1½:3) type A1 using 20 mm graded aggregate mixed with water proofing compound as per manufacturer"s instructions,in flooring of sunken floors,complete all as specified and directed.Notes:- (i) WPC will be measured and paid seperately. (ii) Slope towards the spout/outlet in sunken floors shall be maintained.(iii) Two coats of epoxy resin/polymer modified cementitious coating as per manufacturer"s instructions shall be applied on the existing floor surface before laying of cement concrete and the cost of same shall be deemed to inclusive in the quoted rate. ["Make- "Brushbond" of Foscroc or equivalent of Make Sika/Dr Fixit] |
| 9 | Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work,complete all as specified and directed. |
| 10 | Supply only integral water proofing compound all as specified |
| 11 | Materials and Labour for,second class hard wood,plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed,complete all as specified and directed. |
| 12 | Supply and Fix, 35 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (a) and fitted to chowkhats,complete all as specified and directed. |
| 13 | Supply and Fix, 35 mm thick,plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete all as specified and directed. |
| 14 | Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed. |
| 15 | Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed. |
| 16 | Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 125 mm long complete all as specified and directed. |
| 17 | Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed. |
| 18 | Supply and Fix, Aluminium Alloy, anodised, sliding door bolt, length of bolt 300 mm,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 19 | Supply and Fix, mild steel, 300 mm,ordinary rat-tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 20 | Supply and Fix,aluminium handles,fabricated type,anodised, 75 mm size, complete all as specified and directed. |
| 21 | Supply and Fix,aluminium handles,fabricated type,anodised, 100 mm size, complete all as specified and directed. |
| 22 | Supply and Fix,aluminium handles,fabricated type,anodised, 150 mm size, complete all as specified and directed. |
| 23 | Supply and Fix, medium weight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed |
| 24 | Supply and Fix, medium weight,stainless steel butt hinges,100 mm size, complete all as specified and directed |
| 25 | Supply and Fix,continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 30 mm (when open),complete all as specified and directed. |
| 26 | Supply and Fix,hasp and staple,size 75 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws,complete all as specified and directed |
| 27 | Supply and Fix,50mm dia, polished, hard wood knobs fixed with screws, complete all as specified and directed. |
| 28 | Supply and Fix in repairs,stainless steel curtain rod, 20 mm dia.,including fancy knobs with brackets on both ends,complete all as specified and directed. |
| 29 | Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 30 | Supply and Fix in repairs,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 31 | Supply and Fix,brass 2 Levers mortice lock,vertical type,size 100 mm, complete all as specified and directed. |
| 32 | Supply and Fix in repairs,aluminium hat and coat hooks,solid body, 175mm to 250 mm,complete all as specified and directed. |
| 33 | Supply and Fix in repairs,brass chromium plated,tubular towel rail, 20mm dia.,complete all as specified and directed. |
| 34 | Supply and Fix in repairs,brass chromium plated brackets for tubular towel rail, 20mm dia.,complete all as specified and directed. |
| 35 | Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, complete all as specified and directed. |
| 36 | Supply and Fix,aluminium with powder coating of any colour (Thickness of powder coating not less than 50 micron),frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.,complete all as specified and directed. |
| 37 | Supply and Fix,aluminium with powder coating of any colour (Thickness of powder coating not less than 50 micron) door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,rubber neoprene packing,handles 2 Nos in each door,hinges,aluminum with powder coating of any colour (Thickness of powder coating not less than 50 micron) snap beading screws etc.,anodised aluminium fittings such as suitable barrel tower bolts of extruded section (2 No.),lock (01 No),floor door stopper (01 No) etc.,complete all as specified and directed. |
| 38 | Supply and Fix, aluminium with powder coating (minimum thickness of powder coating 50 micron) frame,92 mm x 29.5 mm for three track sliding windows with one or more rebates including joining cleat for fixing etc., with sliding type shutters,without sash bars, aluminium sections with powder coated (minimum thickness of powder coating 50 micron) 39 mm x 20 mm including necessary joining cleats,glazing clips,rubber packing,anodised aluminium with powder coated (minimum thickness of powder coating 50 micron) snap beading,screws etc.(Thickness of aluminium sections not less than 1.5 mm),with suitable sliding & locking arrangement,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and 4.8 mm thick sheet glass tinted,complete all as specified and directed. Notes:-(i)Refer list of Drawings.(ii) Overall size of opening will be measured. |
| 39 | Supply and Fix,aluminium with powder coating (minimum thickness of powder coating 50 micron) frame 63.5 mm x 38 mm x 1.5 mm and aluminium with powder coating (minimum thickness of powder coating 50 micron) window and ventilator shutters,half portion louvered and half portion fixed type without sash bar,with half portion provided with 100 mm wide louver blades made out of 5 mm thick figured glass,pin head type aluminium actuator bar and lever handle with and including stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm for insect proofing and rest half portion provided with aluminium with 5 mm thick figured glass, pin head type and including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed. Notes:-(i)Refer list of Drawings.(ii) Overall size of opening will be measured. |
| 40 | Supply and Fix,anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement as specified and directed. |
| 41 | Materials and Labour for,anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick,high pressure steam cured (HPSC) non asbestos fibre cement designer (primered) building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets,complete all as specified and directed. |
| 42 | Materials and Labour for,6 mm thick,high pressure steam cured (HPSC) non asbestos fibre cement designer (primered) building boards fixed or laid to aluminium framework with screws including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets,complete all as specified and directed. |
| 43 | Materials and Labour for,18/19 mm thick veneered particle boards interior grade,solid core, general purposes type,faced with decorative veneer on both faces, fixed with screws to timber frame work as in cup board/cabinet shutters including provision of 10 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood,wrought on exposed edges,finished with two or more coats of French polish for glossy finish and including dismantling existing timber boarding of any description fixed in any position with screws,complete all as specified and directed. |
| 44 | Roughening surfaces of old concrete roof slab/chajjas by picking, sweeping clean and washing down with water to remove dust, etc., brushing neat cement slurry with 3.0 kg of cement per sq. metre and rendering 10 mm thick, cement plaster/screed, in cement mortar (1:3) mixed with water proofing compound as per manufactures instructions(waterproofing compound measured and paid seperately) including provision of water proofing treatment over smooth finished surfaces by application of cold applied bituminous primer as per manufacturer"s instructions, providing and laying 3.00 mm thick, plain finish, APP modified bitumenous waterproofing and damp proofing membrane with polyester reinforcement (Non-Woven Polyester Mat), conforming to IS 16532 :2017 (Dimensions and weight of APP membrane polyester as per Table 2 of IS), by forced (torch on) application, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction, complete all as specified and directed. |
| 45 | Roughening surfaces of old concrete surface by picking,sweeping clean and washing down with water to remove dust, etc., brushing neat cement slurry with 3.0 kg of cement per sq. metre and providing 50 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement,complete all as specified and directed. |
| 46 | Materials and Labour for, bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight,10 mm wide and 50 mm depth as in joint filling for plinth protection,complete all as specified and directed. |
| 47 | Materials and Labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming toIS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 48 | Materials and Labour for,Non - skid Ceramic tiles, coloured,7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, conforming to IS 15622, Grade B IIa,in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 49 | Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 8 to 9 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 50 | Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 8 to 9 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M,on vertical surface of wall such as dados, skirting etc,,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles and rubbish off the premises,complete all as specified and directed. |
| 51 | Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:3) on concrete surfaces in ceiling and finishing surface even and smooth without using extra cement including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. and including preparing new surfaces plastered or unplastered and applying three coats of white wash,in ceiling,complete all as specified and directed. |
| 52 | Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement,including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,and including applying two coats of distemper oil emulsion over a coat of primer,complete all as specified and directed. |
| 53 | Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls,including taking down cement plaster from brick or concrete surfaces of any description including racking out joints,hacking for key,scrubbing down with water etc. and includingpreparing new surfaces plastered and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm,on walls,complete all as specified and directed. Note:-Water proofing compound will be measured and paid seperately. |
| 54 | Material and Labour for, 4.80 mm thick sheet glass,tinted and glazing in square exc 0.5 sq. m in each pane,complete all as specified and directed. |
| 55 | Materials and Labour for, 3 mm thick,sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads,complete all as specified and directed. |
| 56 | Materials and Labour for, 3 mm thick,sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones,complete all as specified and directed. |
| 57 | Materials and Labour for, 3 mm thick,figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane,complete all as specified and directed. |
| 58 | Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed. |
| 59 | Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty,complete all as specified and directed. |
| 60 | Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed. |
| 61 | Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed. |
| 62 | Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed. |
| 63 | Taking up or down,15 mm bore,steel tubing and connections,including cleaning for refixing or removal to store,complete all as directed. |
| 64 | Taking up or down,20 mm bore,steel tubing and connections,including cleaning for refixing or removal to store,complete all as directed. |
| 65 | Taking up or down,25 mm bore,steel tubing and connections,including cleaning for refixing or removal to store,complete all as directed. |
| 66 | Refixing,15 mm bore,old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed. |
| 67 | Refixing,20 mm bore,old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed. |
| 68 | Refixing,25 mm bore,old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed.Note:- (Applicable for Serial Item No. 66,67 & 68) Serviceable old steel tubing and connections obtained from Serial Item No. 63,64 & 65 shall be re-fixed. |
| 69 | Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,complete all as specified and directed. |
| 70 | Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,complete all as specified and directed. |
| 71 | Materials and Labour for galvanized steel tubing, medium grade, 25 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,complete all as specified and directed. |
| 72 | Materials and Labour for galvanized steel tubing, medium grade, 50 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing,50 mm bore, complete all as specified and directed. |
| 73 | Disconnecting existing tanks of capacity exceeding 250 Litres & not exceeding 500 Litres,setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.,complete all as directed. |
| 74 | Disconnecting existing tanks of capacity exceeding 500 Litres & not exceeding 1000 Litres,setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.,complete all as directed. |
| 75 | Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I ,including dismantling existing water tanks and removing to store,complete all as specified and directed. |
| 76 | Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I,complete all as specified and directed. |
| 77 | Supply and Fix,ball valves high pressure of PTMT (Minimum weight210gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed,complete all as specified and directed. |
| 78 | Supply and Fix in repairs, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 15 mm bore, complete all as specified and directed |
| 79 | Supply and Fix in repairs, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and directed |
| 80 | Supply and Fix in repairs, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle,long body type with flange,screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed. |
| 81 | Supply and Fix in repairs,angle stop valves,cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed. |
| 82 | Supply and Fix in repairs,stop valves,cast copper alloy,fancy type, chromium plated,screwed down, high pressure with long shank and cup (concealed type), screwed both ends for steel pipe of for unions, 15 mm bore,complete all as specified and directed. |
| 83 | Supply and Fix in repairs,Sink Mixer with swinging spout (Wall Mounted Model) with connecting legs & wall flanges,screwed for iron pipe, 15 mm bore, complete all as specified and directed.[Cat No. CON-309KNM of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”] |
| 84 | Supply and Fix in repairs,brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed,complete all as specified and directed. [Cat No. CON-219KN of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”] |
| 85 | Supply and Fix in repair,brass chromium plated shower rose,125mm size, fixed to steel pipe or union 15 mm bore,complete all as specified and directed. |
| 86 | Supply and Fix in repairs,health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 87 | Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45 gms), for 32 mm bore discharge pipe,complete all as specified and directed. |
| 88 | Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed. |
| 89 | Supply and Fix in repairs,PVC collapsible waste pipe (31/32 x 950) mm all as pe Cat No.3274 of Make Prayag or equivalent model of Make Polytuff/Shakti, complete all as specified and directed. |
| 90 | Supply and Fix, 600 mm X 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 91 | Supply and Fix in repairs,toilet paper holder with flat recessed type stainless steel,complete all as specified and directed. |
| 92 | Supply and Fix in repairs,sheet glass shelf assembly consisting of5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long,complete all as specified and directed. |
| 93 | Supply and Fix in repair,bathroom mirror cabinet,selected quality,of size 500 mm x 400 mm,complete all as specified and directed.(Make:-Parayag Cat No.556 or equivalent Model of Make Commander/ Cera/Hindware/Parryware) |
| 94 | Supply and Fix in repairs, vitreous China wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed. |
| 95 | Supply and Fix in repairs,vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed. |
| 96 | Supply and Fix in repairs,plastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed. |
| 97 | Supply and Fix in repairs,flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern,complete all as specified and directed. |
| 98 | Supply and Fix in repairs,PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed. |
| 99 | Taking down carefully existing vitreous China wash basin, flat back, any size including brackets,keeping aside in safe custody for reuse and refixing in original position,complete all as specified and directed. |
| 100 | Taking down carefully existing PVC valve less, syphonic action type, flushing cistern of capacity 10 Litres, including brackets, flush pipe,keeping aside in safe custody for reuse and refixing in original position,complete all as specified and directed. |
| 101 | Supply and Fix, 75 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls,complete all as specified and directed. |
| 102 | Supply and Fix, 110 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern),complete all as specified and directed. |
| 103 | Supply and Fix, 75 mm bore PVC (SWR) bends any radius,with access door,complete all as specified and directed. |
| 104 | Supply and Fix, 110 mm bore PVC (SWR) bends any radius,with access door,complete all as specified and directed. |
| 105 | Supply and Fix,75 mm bore PVC (SWR) branch piece,single (Single Y) equal or unequal,with access door,complete all as specified and directed. |
| 106 | Supply and Fix,110 mm bore PVC (SWR) branch piece,single (Single Y) equal or unequal,with access door,complete all as specified and directed. |
| 107 | Supply and Fix in repairs,PVC (SWR) floor trap, plain with grating,with diameter of outlet 75 mm, including jointing with solvent cement,complete all as specified and directed. |
| 108 | Supply and Fix in repairs,grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed. |
| 109 | Supply and Fix in repairs,grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms),complete all as specified and directed. |
| 110 | Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
