Tender For 9-B Suspense Stock During 2022-23Sh :- Supply And Stacking Of Sfrc Gt Cover Only In Ndmc Civil Store, New Delhi-Delhi

Tender For 9-B Suspense Stock During 2022-23Sh :- Supply And Stacking Of Sfrc Gt Cover Only In Ndmc Civil Store- Supply And Stacking Of Sfrc Gt Cover Only In Ndmc Civil Store , Gt Cover Only Of Rectangular Shape 520Mm X 560Mm And 70Mm Thick.. , Gt Cover Only Of Circular Shape 660Mm Dia And 70Mm Thick. , Conditions:- The Material Shall Be Supplied At Any Ndmc Stores As Per Instruction Of Engineer In Charge. The Quoted Rates Shall Be Net, Inclusive Of All Taxes I.E. Gst, Cartage Etc. And Nothing Extra Shall Be Paid Over The Quoted Rates In This Account To The Contractor. The Material Shall Be Supplied Proportionate To The Time Of Completion Of Supply And As Per The Directions Of The Engineer-In-Charge. All Other Conditions Of G.T. Cover Like Thickness, Tolerances, Sampling, Concreting, Reinforcement Etc. Will Be Governed By As In The Case Of Equivalent Nearest Size Manhole Cover & Frame As Per Is:12592. Protective Mild Steel Flat Sheet Of Minimum 2Mm Thickness Around The Periphery Of The Cover With Suitable Treatment Of Anti-Corrosive Paint Or Coating As Described In Is : 12592 Shall Be Given. When Tested After Ultimate Load As Per Method Described In Is:12592 For Manhole Cover With Frame, The Grating Cover Only Shall Bear A Non Fracture Load Of 5.00 Mt For 20 Seconds.Testing To Be Carried Out From Laboratory Approved By The Engineer-In-Charge.The Number And Method Of Sampling Shall Confirm To Is:12592. 19 Nos. / 25 Nos. Of Holes Of 50Mm To 60Mm Dia Be Provided On G.T. Cover Circular / Rectangular Respectively And Should Not Have Sharp Edge At Top. The Grating Cover Shall Be Furnished Smooth At Top And Bottom. Ndmc Will Have The Right To Inspect The Manufacturers Workshop Of Authorized Dealer Of Manufacturers / Dealers / Suppliers And Casting Process. The Firm Should Have His Own Well Equipped Casting Workshop With Testing Facility And Adequate For Controlled Concrete And Curing Etc. The Agency Shall Submit The Manufacturing Test Certificate Of All The Items. Steel Fibres Are Used In Addition To Reinforcement And Shall Not Be Greater Than 0.75Mm And The Aspect Ratio Of Fibres Shall Be In The Range Of 50 To 80 And Minimum Volume Of Fibres Shall Be 0.5% Of The Volume Of Concrete. The Following Informatiion Shall Be Clearly And Permanently Casted / Engraved On The Cover:- ( I ) Manufacturer Trade Mark Of Name. ( Ii ) Year Of Manufacturing ( Iii ) With Words Ndmc.

Refer document

INR 13520.0 /-

INR 6.76 Lakhs /-