Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-12-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-12-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement morter bedding (but notbacking ) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) asin sub base of flooing etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring/tiles etc complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6)for bedding of tilescomplete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6)for laying floor finishescomplete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L joint free Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 6-7mm/450x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for joint free Non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirtingetc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 10 | All as per item No.9 above here-in-before but in skirting on veritical surface complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for 20-25 mm thick chequered designer coloured tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | M & L sand filling under interlocking tiles for cushioning including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for machine presssd precast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approvedcomplete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L PCC 1:3:6type C1 (20mm graded stone aggraded) as in plinth protection finished cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 15 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 16 | M & L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for cement concrete type B1 , 1:2:4 using (20 mm graded stone aggregate) as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed by Engineer-in-Charge. |
| 19 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L10 mm thick rendering in Cm 1 :6 on fair faces of bricks or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L 5 mm thick cement plastering in cement mortar 1:3 on ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for 15mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified and directed by Engineer-in-Charge. |
| 23 | Demolition of Mud phuska from roof, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and removing the debries from the site complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Suply only water proofing integral compoundcomplete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer\"s instructions complete all as specified and directed by Engineer-in-Charge.Note : WPC shall be measured and paid under sepearately all as specified. |
| 27 | M&L 40 mm thick cement concrete type B1, 1:2:4 using ( 20 mm graded stone agregate) as in padding of roof surfaces finishing the surface even and rough complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for cement concretetype B-1,1:2:4 using(20mm graded stone aggregate) as in roof kerbs or mud stops, rounded orchamfered on edges complete all as specified and directed by Engineer-in-Charge. |
| 29 | M&L for 3 mm thick APP modified prefabricated in five layers & weight not less than 3.6 Kg/Sqmwater proof memberance reinforced with non wooven polyster mat without aluminium paint over top surfaceof roofwith 10 cm longitudinal & horizontal overlapping and joints finally thermo fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer\"s instructions of APP modified membrance sheet complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for preparation of new steel surfacesof any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for preparation of old painted surfaces of steelof any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 32 | M & L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for preparation ofnewly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer on walls. complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of Cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 36 | Removing all demolished / taken out material from site up tofour storeyed building including loading the material in trucks /carts and throwing out form the AF permisses exceeding 2 KM but not exc 5 KM from the site of work complete all as specified and directed by Engineer-in-Charge. |
| 37 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and directed by Engineer-in-Charge. |
| 38 | All as per item No.37 above here-in-before but exceeding 250 liters but not exceeding 500 litres complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&Frotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 40 | All as per item No.39 above here-in-before but exceeding 500 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed by Engineer-in-Charge. |
| 42 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removing from site complete all as specified and directed by Engineer-in-Charge. |
| 43 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing from site complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F factory made 35mm thickflush shutters solid core construction with block board core and plywood face panel commercial type on both faces complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F solidPVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheetfor top rail, lock railand bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F 125mm size aluminium handle cast type anodised complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F 250mm long aluminium alloyanodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F stainless Steel Butt hinges of 100 mm size,complete all as specified and directed by Engineer-in-Charge. |
| 53 | All as per item No 52 above here-in-beforebut 75mm size complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F 100 mm double legged door stopper of aluminium alloy with rubber complete all as specified and directed by Engineer-in-Charge. |
| 55 | Dismantling ofold Aluminium work like (Doors/ windows/Ventilators and partitionsframes and shutters) any type and shape etc complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for door shutters, windows ventilators with one or more rebates with and including joining cleats for fixing etc complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutter fixed / openable type with sash bar aluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip,rubber packing, anodised aluminium snap beading, hinges type B-21 100mm long (2 No) suitable handle (2 no.) peg stays 150mm long, screws etc complete all as specified and directed by Engineer-in-Charge.Note :- Glass panes in panels shall be measured and paid separately. |
| 58 | S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutter , aluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip,rubber neoprene packing, handles 2Nos in each door, hinges, anodised powder coated aluminium snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.Note :- Glass panes in panels shall be measured and paid separately. |
| 59 | M&L for 5.5mm thickblack sheet glass, selected quality and glazing with aluminium beading in square exc./n. exc0.5 sqm. in each pane fixed to aluminium frame work with and including necessary provision of glazing clips, rubber packing / gasket, screw etccomplete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F fabricatedanodized aluminum grill of size 75x75mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for double action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge. |
| 62 | Cutting opening through brick wall for door/ windows and other openingsor enlarging existing openings, converting windows/doors openings etc or cutting out defective brick work for under -pinning including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviciable brickshard core etc to store and rubbish not exc. 50mtr, built in cement motar complete all as specified and directed by Engineer-in-Charge. |
| 63 | Forming jambs , etc to opening , including cutting, toothing and properly bondinginto old work, also facing , jointing and pointing to match existing work, cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 64 | Making good under cills or over arches , lintels and bressumers, including all pinning whennecessary , cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 66 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 67 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F steel work as in tubular, rafters, purlins, posts and similar work(round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtrincluding postspecial shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws complete all as specified and directed by Engineer-in-Charge. |
| 70 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or any insulations boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 71 | M & L for microperforated metal tiled false ceiling of size 595x595 mm, 1.5mm dia of holesin 22% area in digonal pitch, made out of 0.5mm thick GI sheet , galvanizing 90- 100GSM , exposed surface of tiles coil coated with 25 micron or polyster powder coating of thickness 60 Micron in colour off white / white, Tee runners 15/24x38mm, 0.27-0.33mm thick, cross T of size 15/24x25-38mm ,wall angle of size 24x24x0.27-0.33mm, grid suspended with GI slotted cleats of size 26/27 x 26/27 x25x 1.2-1.6mm fixed to ceiling with M6 anchor fasteners 2.68/ 4mm GI wire, etc complete all as specified and as per manufactur\"s instructions complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair 75mm diaCI floor /nahani trap with grating CP including jointing to waste pipe fixed in cementconcrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&Fas in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap(excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.complete all as specified and directed by Engineer-in-Charge. |
| 75 | S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified. |
| 76 | S&Fvitreous china bowl urinal flat back of size 465 x 355x 265 mm, white including grating and union for discharge pipe,includingwaste pipe and including fixing plugs beading urinal against wall in CM 1:2, securing urinal to plugs with brass screws 60 mm long, pointing around urinal in white cement complete all as specified and directed by Engineer-in-Charge. |
| 77 | Taking up or down15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 78 | All as per item No.77 above here-in-before but20 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F for medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed by Engineer-in-Charge. |
| 80 | All as per item No.79 above here-in-before but20 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F in repair 15 mm bore bib tap chromium plated with crutch or butterfly handles screwed down for iron pipes or for brass ferrulecomplete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F in repair 15 mm bore bib tap chromium plated,fancy type, long shunk screwed down for iron pipes or for brass ferrule complete complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F as in repair 15 mm bore pillar taps cast copper alloy capaston headchromium plated, fancy typescrewed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F in repair 15 mm bore stop valve/angle valve cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for ironpipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F in repair 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for ironpipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 86 | S& F 15mm sizePVC connection pipe with PTMT nuts length 600 mm complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F in repair 125mm/150mm dia chromium plated grating fixed on floor trap/Nahni trap with cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&Fas in repair shower rose of 100mm circular type cast copper alloy, chromium plated,fancy type,with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F toilet paper holderof brass, chromium plated or stainless steel fixed to wall with stainless steel screws complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F in repairchromium plated jetfor EWC along with pipe complete all as specified and directed by Engineer-in-Charge. |
| 93 | S&F in repair curtain rods with mild steel conduit pipe 25 mm bore with covering of PVC sheet with fancy eves with wall thickness 1 mm thick incl MS chromium palted brackets holders or screwed to pelmet boxes or to fixed in walls incl domes and side walls complete all as specified and directed by Engineer-in-Charge. |
| 94 | S&F in repair MS chromium plated tubular towel rail 20 mm dia ‘D’ type60 cm longbetween flanges to wall with chromium plated brass screw, washers and nylon sleeves complete all as specified and directed by Engineer-in-Charge. |
| 95 | S&F as in repair bevelled edge mirror of selected quality of size 600 mm x450 mm mounted on 6 mm thick AC building board of or 6 mm thick cmmercial ply wood fixed to wooden plug with chromium plated brass screw and cup- washers as in repair complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F as in repair gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 97 | Demolition of reinforced cement concrete of any description andin any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 98 | M&L RCC type B-1 1:2:4 using (20mm graded crushed stone aggregate) as in slabs supported on walls, beams and colomns in floors, roofs, landings etc complete all as specified and directed by Engineer-in-Charge. |
| 99 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming toFe- 415, Fe 500 or Fe-550 as in steel reinforcement for concretecomplete all as specified and directed by Engineer-in-Charge. |
| 101 | S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 102 | S & F 75 mm dia PVC (SWR) bends any radius with rubber rings joints complete all as specified and directed by Engineer-in-Charge. |
| 103 | S & F 75 mm dia PVC (SWR) vent cowlcomplete all as specified and directed by Engineer-in-Charge. |
| 104 | M&L125/110 mmPVC (SWR)gully trap, setting and jointing with solvent cement as required complete all as specified and directed by Engineer-in-Charge. |
| 105 | S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge. |
| 106 | Supply only for Mild steel plates, plain or chequred, 5 mm thick, Fe 410-W (Gde-E-250) Quality-A or over in thickness in available sizesetc complete all as specified and directed by Engineer-in-Charge. |
| 107 | M&L for welding exc 2.5 cm but n exc 5cm in length for n exc 6mm thickness of metal to be welded etc complete all as specified and directed by Engineer-in-Charge. |
| 108 | S&f5 mm thick solidpolycarbonate sheets in semi circle shape on roofs/chajja\"s of desired colour and fixed with aluminium metal flat / angle / tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed by Engineer-in-Charge. |
| 109 | M&L for straight or raking fair cutting n exc 10cm width or girth on exposed surfaces of brick work such as in splays, chamfers, etc. including rubbed finish and waste complete all as specified and directed by Engr-in-charge. |
| 110 | M & L cement concrete (1:2 :4) type B1 (20mm graded stone Agg.) as in embedding of angle/sheet in wall or any surface etc complete all as specified and directed by Engineer-in-Charge. |
| 111 | M&L for washed stone grit plaster on exteriorwalls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 course sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings. complete all as specified (Payment for providing grooves shall be made separately) etc complete all as specified and directed by Engineer-in-Charge. |
| 112 | M&L for extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skiritng, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc complete all as specified and directed by Engineer-in-Charge. |
| 113 | M&L for preparation of new plaster surface & apply twocoats of cement based paint over a coat alkali primer resistance and complete all as specified and directed by Engineer-in-Charge. |
| 114 | M & L for preparation of old surfaces by removal of existing treatmentand apply two coats of cement based paint over a coat alkali primer resistance etc complete all as specified and directed by Engineer-in-Charge. |
| 115 | M & L for preparation of old surfaces and apply two coats of synthetic enamel paint on surfaces of stone/concrete/any description, over 10cm in width or grith, not otherwise describedetc complete all as specified and directed by Engineer-in-Charge. |
| 116 | M & L for preparation of old surfaces and apply two coats of ready mix paint, for use on floors etc complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 118 | M & L two coat of synthetic enamel paint over a coat of red oxide on steel surface incl preparation of steel surface width or girth exc 10cm complete all as specified and directed by Engineer-in-Charge. |
| 119 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer-in-Charge. |
| 120 | M & L cement concrete (1:3:6) type C1 (20mm graded stone Agg.) as in embedding of angle iron post complete all as specified and directed by Engineer-in-Charge. |
| 121 | M&L for Surface excavation n.exc 30 cm deep and and avg 15 cm deep andgetting out soft and loose soil complete all as specified and directed by Engineer-in-Charge. |
| 122 | M & L broken bricks hard core of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge. |
| 123 | M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 124 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigmentincl 25mm thick sand fillingcomplete all as specified and directed by Engineer-in-Charge. |
| 125 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 126 | M & L for sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 127 | M&L for broken bricks hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed by Engineer-in-Charge. |
| 128 | M&L for PCC (1:3:6) type C2 using 40 mm graded aggr as in surface channels and drains complete all as specified and directed by Engineer-in-Charge. |
| 129 | M&L brick work with sub class \"B\" bricks, straight or curgved in cm 1:4 straight or cuved on plan to exc 6m mean radius complete all as specified and directed by Engineer-in-Charge. |
| 130 | M&L rendering 15mm thick in CM (1:4) onbrick work or concrete surfaces smooth & even with using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 131 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 132 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as incoping/benching and all other similar works including necessary formwork complete all as specified and directed by Engineer-in-Charge. |
| 133 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and directed by Engineer-in-Charge. |
| 134 | All as per item No 113 above but Add or deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified and directed by Engineer-in-Charge. |
| 135 | Removing excavated material n. exc 50 m and deposting where directerd at a level n. exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 136 | M&L for RCC 1;2;4 (using 20mm graded agg) pre-cast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles all as specified with one hole at centre and both side ring to carrying complete complete all as specified and directed by Engineer-in-Charge. |
| 137 | M&L for TMT Bar 10mm dia and over cut to length bend to shape required incl cranking, bending sprilly for hooping colmns hooking ends and binding with and incl MS wire (Anneled) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 138 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge. |
| 139 | Taking down copper/Aluminium point wiring (light, Fan, socket or power) including fitting such as switch , socket C/roses , lamp holders, tube light fitting wooden boards, bell ., call bell, MCBs & regulators etc & making good to distrubed surfaces & maching with the existing colour of wall/Floor etc complete all as specified and directed by Engineer-in-Charge. |
| 140 | Taking down old unserviceable main switch/DBs/mcb DBs with MCB including making good the disturbed surface complete all as specified and directed by Engineer-in-Charge. |
| 141 | Taking down sub main wiring of any size complete all as specified and directed by Engineer-in-charge. |
| 142 | M&L for point wiring with PVC insulated and unsheathed cable 1.5 Sqmm (Nominal area) ISI marked stranded copper conductor single core including medium grade PVC conduit not less than 20mm dia for point wiring, concealed in wall / false ceiling modular metal flush terminal boxescover plate with frame of required module andcolour with all accessories including 1.5 Sqmm PVC insulated and unsheathed stranded coppercableto common earth and connecting to earth dollyincluding colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed by Engineer-in-charge for the following.(a)One light point controlled by one way switch. |
| 143 | (b) One fan/exhaust fan/Air ciculator /bell point controlled by one way switch. |
| 144 | (c) One5 pin socket outlet 5/6 amps on independent board . |
| 145 | (d)One 5 pin socket oulet 5/6 amps on same board . |
| 146 | M&Lfor point wiring complete with stranded copper conductor 2.5 sq mm single core (nominal area) PVC insulated and unsheathed cable 1100 volts grade drawn in and including medium duty concealedPVC conduit conforming to IS : 9537 (Para-3) and ISI marked not less than 25 mm dia with 1.6 mm thick concealed pressed steel terminal boxes factory made and painted with stove enameled black, top cover 2.8mm thick plastic laminated sheet of required colour fixed with brass screw and cu washers with all accessories including single core strandedcopper conductor connected PVC unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as secified for one 6 pin socket outlet two in one 16/6 amps on anindeendent board all as specified and directed by Engineer-in-charge. |
| 147 | Supply and fix switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed by Engineer-in-charge. |
| 148 | Supply and fix switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed by Engineer-in-charge. |
| 149 | Supply and fixing socket outlet 2 in 1, 3 pin 5 Amps all as specified and directed by Engineer-in-charge. |
| 150 | Supply and fixing socket outlet 3 pin , 3 pin 15 Amps flush type all as specified and directed by Engineer-in-charge. |
| 151 | Supply and fix ceiling roses, 3 phase, PVC/Polycarbonate, isolated body all as specified and directed by Engineer-in-charge. |
| 152 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed by Engineer-in-charge. |
| 153 | S&Fin replacement ofLED tube light along with fixture,18W complete with all accessorieswith twin conductorcomplete all as specified and directed by Engineer-in-charge. |
| 154 | S&F in replacement of Recess mountedlightwith LED 36 Watt energy saving recess mounted luminaire suitable for 600mm x 600mm Modular/POP/Gypsum ceilingcomplete all as specified and directed by Engineer-in-charge. |
| 155 | Supply and fix in replacement of factory made epoxy polyster powder coated distribution board SP&N 8 way fabricated from minimum 1.6 mm thick CRCA sheet double door (IP-42 protection) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP RCBO or DP MCB and RCCB as incomer and 6 SP MCB\"s as outgoings complete all as specified and confirming to IS: 8623 all as specified and directed by Engineer-in-charge. |
| 156 | Supply and fixing in replacement of MCB signle pole 5-30 Amps 230 volts \"C\" series complete all as specified and directed by Engineer-in-charge. |
| 157 | Supply and fixing in replacement of MCB single pole and neutral 40 /63Amps 230 volts \"C\" series complete all as specified and directed by Engineer-in-charge.. |
| 158 | S/Fix in replacement MCB DB TPN 4 Way factory made IP 42 protection class metal double doorwith 200 Amp rating bus bar with incomer as 4 pole MCCB 240/430V for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed by Engineer-in-charge |
| 159 | Supply and install in replacement MCCB TPN fixed type 100 Amps rated with breaking capacity 16 KA complete all as specified and directed by Engineer-in-charge |
| 160 | S/Fix in replacement MCB DB SPN 8 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one. |
| 161 | M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper complete all as specified and directed by Engineer-in-chargeat site Note : Two runs of 4 sqmm cable alongwith one run of 2 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length). |
| 162 | S&F in repacement of submain wiring withunsheathed multi-stranded copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 20mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core and one run of 4 Sqmm PVC insulated copper conductor for earth continuity wire complete all as specified and directed by Engineer-in-charge.Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. |
| 163 | S&Fhighly efficient high LEDstreet light 45 watt building lightwith lens made of high pressure die cast Al housing reflector and enclosed with toughened glass IP66 complete all as specified and directed by Engineer-in-charge |
| 164 | S&F in replacement street light GI pipe bracket 50 mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etccomplete all as specified and directed by Engineer-in-charge at site. |
| 165 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3½ core complete all as specified and directed by Engineer-in-charge |
| 166 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core complete all as specified and directed by Engineer-in-charge |
| 167 | Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-charge |
| 168 | Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed by Engineer-in-charge |
| 169 | Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed by the Engineer-in-Charge. |
| 170 | Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted by the Engineer-in-Charge.Note : Punned down thickness shall be measured and paid . |
| 171 | M&L for sub class ‘B’ bricks old sizelaid flat dry in trenches over cable, across the direction of cable complete all as specified & directedby the Engineer-in-Charge. |
| 172 | Supply & fixing in replacement ofSPN enclosure with two pin and earth plug and socket complete with on SP MCB 25 Amps complete all as specified and directed by Engineer-in-Charge. |
| 173 | M&L for carefully dismantling Split AC of 2 TR and shifting and re-installation of existing split AC after servicing completeall as specified and as directed by Engineer-in-charge |
| 174 | Repair,servicing & preventive maintenance of split type AC\"s of capacity 1.5 TR comprising of the following tasks installed at different locations including refixing, commissioning and testing complete all as specified and directed by Engr-in-charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
