Military Engineer Services-MES has published Repairs / Replacement Of Certain Woode / Steel And Aluminium Joinery / Cupboards / False Ceiling / Panneling And Hard Ware Fittings In Billets / Fcm Complex In Tech Area At Afa Hyderabad. Submission Date for this Tender is 01-11-2022. Railway Ancillaries Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-11-2022 |
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description not exc 1 sqmeach complete all as directed. |
| 2 | Taking down shutters of any description exc 1 sqm but not exc 2 sqmeachcomplete all as directed. |
| 3 | Taking down chowkats or frames with shutters exc 1.5 sqm but not exc 4 sqm each of any description (without taking off shutters from the frame) complete all as directed |
| 4 | Taking down chowkats or frames with shutters not exc 1.5 sqm each of any description (without taking off shutters from the frame) complete all as directed |
| 5 | S&F 35 mm thicksecond class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 6 | S&Ffactory made 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 7 | S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 8 | S & F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed. |
| 9 | S & F factory made solid PVCdoor shutter 30 mm thick (style) consisting of frame made out of M S tubes for top and bottom rails. M S frame shall be covered with heat moulded PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both side PrelamPVC sheets used instead of Plain colour PVC sheet for top rail, lock rail & bottom rail, panelling of both side PrelamPVC sheets used instead of Plain colour PVC sheet to be fitted in the M S frame welded/sealed to the stiles & rails feathered at edges with suitable PVC sheet beading, and jointed to gether with solvent cement complete all as specified and as directed. |
| 10 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 11 | S & F in repairstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 12 | S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc complete all as specified |
| 13 | S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and as directed. (Powder coating should not be less than 50 micron) |
| 14 | S & F powder coated aluminiumwindows and ventilator shutters,sliding type, without sash bars aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips , rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as rollers, locking arrangement, handles etc complete all as specified and as directed.(Powder coating should not be less than 50 micron) |
| 15 | S & F 12 mm thickprelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminationin aluminium doors/partition complete all as specified and as directed. |
| 16 | Dismantling wall and ceiling boards (fibre, pulp,insulation,etc) or insulation boards/slabs/blankets, any thickness,including cover fillets/scantling and uframed work etc of any description complete all as specified and as directed. |
| 17 | S & F suspended false ceiling grid system with galvanised steel section framework including fitting 1200mm long cross channels that have to be interlocked between main runners at 600mm centers making a module of 1200x600mm, cross channels to be suspended independently and fixing 12mm thick plain gypsum boards (POP Boards) and treated with plaster of paris for flush look and applying two coats of distemper, oil emulsion over a coat of primer over putty of required thickness complete all as specified and as directed. |
| 18 | Supply and fixArmstrong Ceiling Classic Lite 600 mm x 600 mm x 16 mm, NRC-0.55, grid size m/t 32 mm x 24 mm, cross Tee of 1200mm of size 27 mm x 24 mm and cross Tee of 600mm of size 25 mm x 24 mm and wall angle of size 19x19mm and fixed all around the wall to form a grid of size600 mm x 600. mm Tiles shall be inserted in the formed grid and suspended with 2mm GI wire at every 1200mm intervals C/C complete all as specified and as directed. |
| 19 | Supply and fixArmstrong Ceiling Classic Lite 600 mm x 600 mm x 16 mm, NRC-0.55, grid size m/t 32 mm x 24 mm boards including taking down old ceiling boards complete all as specified and as directed. |
| 20 | S & F in repair 12 mm thickprelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with nails complete all as specified and as directed. |
| 21 | M & L for 2nd class hard wood Plain fillets,exc 13 andnot exc 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails including taking down old boards complete all as specified and as directed. |
| 22 | M&L for timber scantling exc 40 sq.cm and over in section and unframed work etc including dismantling of old timber complete all as specified and as directed. |
| 23 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 24 | M&Lfor 18 mm thick plywood of grade (BWP), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and as directed. |
| 25 | M & L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured andpattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed. |
| 26 | M & L for PVC (edge beading) lipping of suitable width fixed to exposed edges of 18 mm thick plywood of approved quality and colour to match the laminate sheet fixed with approved adhesive complete all as specified and as directed. |
| 27 | M & L forBrass handles, cast type, polished bright 150 mm long complete all as specified and as directed. |
| 28 | S&F Brass Locks cupboard grade I,size 50 mm brass 4 levers complete all as specified and as directed. |
| 29 | S&F Steel Auto closing concealed Hydraullic soft closing Hinges of size 116 mm x 60 mmwith holesfixing with screws for cabinet doors complete all as specified and as directed. |
| 30 | S&F in repair Continuous (piano) hinges, brass width of flap 30 mm bright finish or electro galvanised complete all as specified and as directed. |
| 31 | M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 32 | Hacking out old unserviceable glass / broken glass panes of any description, from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 33 | S&F rough cast wired glass, 6.4 mm thick and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 34 | S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm and in aluminium frames in each pane complete all as specified and as directed. |
| 35 | S&F 4 mm thick frosted glass sheet and glazing with oil putty in squares n .exc0.5 sq. m in each pane complete all as specified and as directed. |
| 36 | S & F 4.80 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 37 | M & L for taking down existing aluminium doors, resecuring or easing & adjusting and refixing in same opening after necessary repairs for smooth functioningof any description exc 1 sqm but not2.5 Sqm each complete all as specified and as directed. |
| 38 | S & F in repair handles for steel window left or right complete all as specified and as directed. |
| 39 | S&F of 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plateetc complete all as specified and as directed. |
| 40 | S&F in repair of 300 mm mild steel , ordinary rat tail rod pattern springs including roller and roller plateetc complete all as specified and as directed. |
| 41 | S & Fin repair 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 42 | S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 43 | S & F in repair75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 44 | S & F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 45 | S & F in repair 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 46 | S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed. |
| 47 | S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed. |
| 48 | S&F of Aluminium handles, cast type, anodised of size 100 mm long etc complete all as specified and as directed. |
| 49 | S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed. |
| 50 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 51 | S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed. |
| 52 | S&F of Aluminium anodised,barrel tower bolts of extruded section of size 150 mm long etc complete all as specified and as directed. |
| 53 | S&F of Aluminium anodised,barrel tower bolts of extruded section of size 100 mm long etc complete all as specified and as directed. |
| 54 | S&F in repairAluminium handles, cast type, anodised of size 125 mm long etc complete all as specified and as directed. |
| 55 | S&F in repair of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed. |
| 56 | S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.. |
| 57 | S&F in repair of Aluminium anodised, barrel tower bolts of extruded section of size 150 mm long etc complete all as specified and as directed. |
| 58 | S&F in repair40 mm dia, cupboard knobs fixed with nut, screw and washer of brass polished etc complete all as specified and as directed. |
| 59 | S & F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified. |
| 60 | S&F in repairFancy type curtain rod 20 mm dia with fixing brackets etc complete all as specified and as directed. |
| 61 | S&F in repairFancy typecurtain rod 25 mm dia with fixing brackets etc complete all as specified and as directed. |
| 62 | S&Faluminium floor door stopper alongwith aluminium alloy body, aluminium double rod with screw fixed rubber and hard drawn steel spring complete all as specified and as directed. |
| 63 | S&Fin repair aluminium floor door stopper alongwith aluminium alloy body, aluminium double rod with screw fixed rubber and hard drawn steel spring complete all as specified and as directed. |
| 64 | S&Fin repair 1st class hard wood door stopper with finish surfaces of section size 100 x 50 x 35 mm alongwith 50mm long steel hinges fixed in door framein centre portioncomplete all as specified and as directed. |
| 65 | S&F rubber beading for doors, windows etc of size 50 mm width and 6 mm thickness complete all as specified and as directed |
| 66 | S&F of Mortice lock, of brass 4 leversvertical type of size 100 mm etc complete all as specified and as directed. |
| 67 | S&F in repair of Mortice lock, of brass 4 leversvertical type of size 100 mm etc complete all as specified and as directed. |
| 68 | S & F door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg complete all as specified and as directed. |
| 69 | S & Fin repairs door closer, hydraulically regulated, aluminium body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg fixed in repairs complete all as specified and as directed. |
| 70 | S&F in repair for toughened glass door bottom lock fittings made of stainless steel complete all as specified and as directed. |
| 71 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 72 | M & L forpreparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 73 | S&F Bird Proofing HDPE nylon Mesh 30 mm aperture size and 1.8 mm diaMake LEO TCHNOVA or equivalentincluding tying with nylon wire as per manufacturer instructions complete all as specified and as directed. Note : The work shall be carried out at 8 to 10mtrs height in ceilings / sides of hanger roof.The rate quoted shall be deemed including necessary arrangement of ladder/scaffoldings etc. The quantity given is to be fixed at multiple hangers in patches of any size as per requirement of site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
