|
| 1 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) of area n.exc 1.5 Sqm each complete all as specified and directed. |
| 2 | -Ditto- all as per Srl item No. 1 here-in-before but area exc 1.5 Sqm and not exc. 4sqm each complete all as specified and directed. |
| 3 | Taking down shutter of any description of area exc 1 sqm and n. exc 2.00 sqmeach complete all as specified and directed. |
| 4 | -Ditto- all as per Srl item No. 3 here-in-before but area exc. 2 Sqm each complete all as specified and directed. |
| 5 | Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfasts exc half bricks and n. exc one brick complete all as specified and directed. |
| 6 | S &FPressed steel frame for doors of size 125 x 60 mm made out of 1.25mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc and making good jambs portion by providing plaster in cement mortar 1:4 and finishes as per existingcomplete all as specified and directed. |
| 7 | S &FPressed steel frame for doors of size 105 x 60 mm made out of 1.25mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. and making good jambs portion by providing plaster in cement mortar 1:4 and finishes as per existingcomplete all as specified and directed. |
| 8 | M & L for Plain cement concrete 1:3:6 type C-1 (using 20mm graded stoneaggregate) as in filling of pressed steel door frame,complete all as specified and directed. |
| 9 | S&F 30mm thick flush shutters, solid core construction with block board core and plywoodface panels, commercialtype on both sides complete all as specified and directed. |
| 10 | S&F 35 mm thick factory made2nd class hard wood glazed and skeleton shutters, open rebatedand preparedto receive glass gauze, etc (without sash bars), edge of framingplain, chamfered or rounded, fittedwith cutand mitred beds for securing glass , etc, sizes ofmembers of shutters as specified in SSR Part I , Section 8 , Clause 8.24 (a) , Supplied and fitted to chowkats complete all as specified and directed. |
| 11 | S&F 35 mm thick factory made 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 12 | S&F Box type steel window with side hung shutter of MS hollow rectangular tube including pintol hinges and 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of red oxide zinc chrome primer including making good jambs portion by providing plaster in cement mortar (1:4) and finished as per existing complete all as specified and directed.Note: (i) Size of outer frame and centre mullion section 60 x 25mm, thickness 1.25 mm.(ii) Size of window shutter 50 x 20mm,thickness 1.25 mm. |
| 13 | S & F Box type steel window with side hung shutter of MS hollow rectangular tube including pintol hinges and 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of red oxide zinc chrome primer including making good jambs portion by providing plaster in cement mortar (1:4) and finished as per existing complete all as specified and as directed.Note:(i) Size of outer frame and centre mullion section 60 x 25mm, thickness 1.25 mm. (ii) Size of window shutter 50 x 20mm, thickness 1.25 mm. |
| 14 | S & F Box type steel ventlator fixed type of MS hollow rectangular tube complete with glazing bars dovetailed or welded and with one shop coat of red oxide zinc chrome primer including making good jambs portion by providing plaster in cement mortar (1:4) and finished as per existing complete all as specified and as directed. (Note: Size of outer frame and centre mullion section 60 x 25mm, thickness 1.25 mm) |
| 15 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 16 | S&F 30 mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 17 | Taking down oldwindows of any description and sizeand S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as specified and directed. |
| 18 | M&L for aluminium powder coated door shutter partly paneled and partly glazed shutter having door frame made out of aluminium anodized section of size 100 x 44.45 x 2.00 mm thick and shutter made out of bottom rail of tube section 114 x 44.45 x 2.00mm thick and top rail , niddle rail, styles of tube section 85 x44.45 x 2.00mm thick using 5mm thick tinted glass of selected quality of required size fixed with rubber beading, aluminium clip, glazing plate and 6-8mm dia anchor rod and 12mm thick both side prelaminated particle board (75mm high from bottom)Make : Novapan /Kitlam/Nepal board including fixed aluminium anodized 2 Nos 125mm circular handle, 20mm long, tower bolt -02 Nos, One No lock 4 lever, vertical type of 65mm with triplicate key, bush and including 3 Nos aluminium butt hinges complete door frame fixed to wall with 6 Nos 150mm long rawl plugs complete all as specified and directed. |
| 19 | Dismantling aluminium door shutter including assembly exceeding1.00 Sqmbut not exceeding 2.00 Sqmand repairfor proper functioning by adjusting moving assembly offloor spring, pivot, hinges etc and re-erectingthe shutterincluding straightening , cutting, tighteningof door shutterand making easy movement of the shutter including replacing of mortice lock door, door handles, rubberglass beadingcomplete all as specified and directed.(Note : Floor springs & mortice locks are to be measured and paid separately under relevant item here-in-after) |
| 20 | Taking down partitions of any descriptions and other similar works and S&F aluminiumpartition with powder coatedaluminiumframe work with standard sections of medium size and weight not less than1.90 Kg / rm and confirmingto catalogue of Jindal or equivalent.The partition shall be fixed with 12mmthick prelaminatedparticle boardwith decorativelamination on both sidesof approvedcolour, in bottom panel and with 5.5mm thickglass of approvedmake in toppanel. The frame shall bewith one or more rebatesincludingjoining cleats , glazingclips, standard rubber beadingetc, includingfixingproperlyat floor leveland wall / column facesproperlycompleteall as specified and directed . |
| 21 | S&F Aluminium louvered ventilators of 100mm x 25mm x 1.50mm section including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. after taking down existing steel ventilator complete all as specified and directed |
| 22 | S&F in repairs locking arrangements for aluminium doorsi.e , by placing new brass lock 4 lever, vertcal typeof 65mm ,with triplicate key etc. complete all as specified and directed. |
| 23 | S&F in repairs 5.5 mm thick tinted glass selected quality of required size fixed with rubber beading, aluminium clip, glazing plate exc 0.5 Sqm in each pane complete all as specified and directed. |
| 24 | S & F in repairs 12 mm thick prelaminated particle board exterior grade, prelaminated both sides with decorative choice laminates and fixed to aluminium framework as in partition etc. including necessary fitting complete all as specified and directed. |
| 25 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 26 | S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 27 | S&F 150mm size, extruded aluminium alloy handle fabricated type anodised complete all as specified and directed. |
| 28 | S&F 150 mm long aluminium anodised barreltower bolt of extruded section and fixed complete all as specified and directed. |
| 29 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 30 | S&F in repairs 200 mm long aluminium anodised barreltower bolt of extruded section and fixed complete all as specified and directed. |
| 31 | S&F in repairs 150 mm long aluminium anodised barreltower bolt of extruded section and fixed complete all as specified and directed. |
| 32 | S&F 100 mm long, mild steel butt hinges \"medium weight\" cold rolled complete all as specified and directed. |
| 33 | M&L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handles etc complete all as specified and directed |
| 34 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking down the existing shutters carefully of any size and description and re-fixing in the same position and minor repairs as required complete all as per specified and directed. |
| 35 | S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedcomplete all as specified and directed. |
| 36 | S&F in repair 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 37 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 38 | M&L for 75mm thick plain cement concrete (1:3:6), type C-2 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified and directed. |
| 39 | M&L for 40mm thick palin cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in flooring even and smooth without using extra cement complete all as specified and directed. |
| 40 | M&L for machine cut kota stone slab flooring 20-25mm thick in one piece as in treads of staircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:4) for laying floor finishes complete all as specified and directed. |
| 41 | M&L for machine cut kota stone slab flooring 20-25mm thick in one piece on vertical surface as in skirting etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and directed. |
| 42 | M&L for polishing of old existing kota stone flooring ie cutting, grinding, joints pigment filling and polishing to get mirror finish complete all as specified and directed. |
| 43 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 44 | M&L for 10mm thick vitrified ceramic tiles (Square / rectangular) polished \"light shade\" or any shade ,area of each tile not exceeding 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 15 mm thick screed bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 45 | M&L for 10mm thick vitrified ceramic tiles (Square / rectangular) polished \"light shade\" or any shade ,area of each tile not exceeding 0.36 sqm, as in dado / skirtingetc. set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed. |
| 46 | M&L for coloured non skid ceramic tiles of size7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 15 mm thick screed bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 47 | M&L for glazed ceramic coloured tiles in vertical surfaces such as in dado etc, size 450x300x7mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 as backing layer for tiles complete all as specified and directed. |
| 48 | Demolition of stone slab and tiles of any description or thickness in floors, footpath, aprons or in shelves, platform etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 49 | M&L for 18-20 mm thick granite slab (machine cut) bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polshing, laid over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 50 | M&L for brickwork with subclass ‘B’ bricks (with old size first quality) straight or curved on plan exc 6m mean radius built in cement motar 1:4 after demolition of old brickwork or stone / boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed. |
| 51 | Taking down cement or cement lime plaster, any description, on brick walls or on concrete surfaces including raking out Joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 52 | M& L for 15mm thick rendering in external surface with cement mortar (1:4) on fair faces of brick work or concrete surfaces with WPC (as per manufacturer instruction) complete all as specified and as directed. (Note - Water proofing compound shall be measured and paid separately under relevant item here-in-after) |
| 53 | Supply only integralwater proofing compound confirming to IS-2645 and as approved complete all as specified and directed. |
| 54 | M & L for 15 mm thick rendering in cement mortar (1:6) as on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol complete all as specified and directed. |
| 55 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer after complete removal of existing finishes by scraping down of old decorative surfaces of walls with steel wire brushes of smoke spots, moulds , efforescent salts includingfilling of spots with plaster of paris (POP) / Birla putty and making smooth surfaces complete all as specified and directed. |
| 56 | M&L for applying two coats of cement base paint over a coat of primer after preparation of newly plastered surface of wall complete all as specified and directed. |
| 57 | M&L for applying two coats of oil bound distemperover a coat of alkali resistant primer after preparation of newly plastered surface of wall complete all as specified and directed. |
| 58 | M&L for applying one coats ofplastic emulsion paint over a coat ofpriming paints after preparation of old plastered surfaces of wall complete all as specified and directed. |
| 59 | S&F mild steel guard bars confirming to Fe-410 with ends of bars shoulderedand /or riveted, or forgedinto spikes for window grills complete all as specified and directed. |
| 60 | M & L for applying two coats of synthetic enamel paintover a coat of red oxide zinc chrome primer after preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 61 | M & L forapplying one coat of synthetic enamel paint after preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 62 | M & L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces after preparation of new wooden surfaces of any description, not otherwise described, over 10 cm in width or girth complete all as specified and directed . |
| 63 | M & L for applying one coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed. |
| 64 | Hacking out old broken glass (any thickness, size, quality) of any description from metal frame including punching or drilling out old glazing pins / spring clips complete all as specified and directed. |
| 65 | S&F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square of area n.exc 0.5 sq.m in each pane complete all as specified and directed. |
| 66 | S&F3.0mm thick sheet glass, ordinary quallity and glazing with oil putty in squareof area exc 0.5 sq.m in each pane complete all as specified and directed. |
| 67 | M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) for filleting, benching, slightly rounding or chamfering on edges, filling undulations depressions in roof surface, providing, cement concrete platform for tanks wherever required after demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 68 | M&L for 10 mm thick screeding / rendering in cement mortar 1:4 on concrete roof surfaces using WPC @ 3% by weight of cement, surfaces finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately under relevant item here-in-before. |
| 69 | M&Lfor cleaning the plastered surface with wire brush and applying water proofing treatment as under :-(a) Apply a uniform coat of primer at 0.40 Kg per sqm over cement plaster complete all as specified and directed.(b) Applying APP (atactic polypropylene) modified polymeric membrane 3mm thick weight not less than 3.60 kg /sqm with 160gm /sqm non woven polyster made at centre core reinforced laid with 75mm side over lap and 100 mm overlap. The membrane has to be laid with LPG torch and overlapped sealed and finished neat complete all as specified and directed.(c) Applying a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180 degree C and applied @1.20 kg /sqm complete all as specified and directed.(d) Preparation of new APP surface of roof and applying two coats of bitumastic aluminium paint over the membrane complete all as specified. |
| 70 | Dismantling wall and ceiling boards (Fibre, pulf, insulation etc.) of any thickness including cover fillets complete all as specified and directed. |
| 71 | S&F 6 mm thick asbestos cement plain building boards, fixed to timber framework / aluminium with screws complete all as specified and directed. |
| 72 | S&Faluminium anodised snap grid (605X605mm size) frame work for False ceiling to support the boards / tiles including hanging with proper hanging arrangement made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long adjuster complete all as specified and directed. |
| 73 | Taking up or down steel water tubing 15 mm dia including connections and fitting complete all as specified and directed. |
| 74 | Taking up or down steel water tubing 20 mm dia including connections and fitting complete all as specified and directed. |
| 75 | Taking up or down steel water tubing 25 to 32 mm dia including connections and fitting complete all as specified and directed. |
| 76 | S&F 15 mm dia steel water tubing, galvanised, \"Medium grade\" with all fittings, fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 77 | Refixing of old steel tubing 15 mm dia and connections in new or old position (wall, ceiling, floors, etc.) complete all asspecified and directed.Note:- old steel tubing obtained from sl itenm No.73 here-in-before shall be reused under this item. |
| 78 | S&F 20 mm dia steel water tubing, galvanised, \"Medium grade\" with all fittings, fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 79 | Refixing of old steel tubing 20 mm dia and connections in new or old position (wall, ceiling, floors, etc.) complete all asspecified and directed. Note:- old steel tubing obtained from sl itenm No.74 here-in-before shall be reused under this item. |
| 80 | S&F 25 mm dia steel water tubing, galvanised, \"Medium grade\" with all fittings, fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 81 | Refixing of old steel tubing 25 mm dia and connections in new or old position (wall, ceiling, floors, etc.) complete all asspecified and directed. Note:- old steel tubing obtained from sl itenm No.75 here-in-before shall be reused under this item. |
| 82 | Disconnecting existing tanks of capacity exc. 250litre but not exc. 500 litre setting aside (or lowering if required) for repair of roof surface, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and directed. |
| 83 | S&F in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 142gms) complete all as specified and directed. |
| 84 | S&F in repairs 15mm dia CP brass fancy type Stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed, complete all as specified and directed. |
| 85 | S&F in repairs 20mm dia stop valves, cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed, all as specified |
| 86 | S & F rotational moulded polyethylene (HDPE) water storage tank 500 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I, including dismantling of water storage tank with float valve of any description complete all as specified and as approved. |
| 87 | S & F rotational moulded polyethylene (HDPE) water storage tank 1000 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I, including dismantling of water storage tank with float valve of any description complete all as specified and as approved. |
| 88 | S & F in repair PVC valveless syphonic action type flushing cistern (Low level) of 10litre capacity, white / coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 89 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.Make : Cat part No : C0278 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE |
| 90 | S&F in repairs vitreous China squatting pan,‘Orissa’ pattern, size 580 x 440 mm white, as approved, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed.Make : Cat part No : C0117 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE |
| 91 | S&F in repairs plastic water closet seat cover (any colour) as approvedclosed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed. |
| 92 | S&F in repairs 15 mm dia bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 93 | S&F in repairs CP two way bib taps 15mm bore screwed for iron pipe and fixed necessary fitting with and includingPVC connection, complete all as specified and directed. |
| 94 | S & F vitreous china wash hand basin size 580 x 450 mm (flat back or angle back type) \"white\" with 32mm dia brass chromium plated waste fitting, galvanised iron \"light grade\" 32 mm bore waste pipe, a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends, making good distrurbed surfaces in cement mortar 1:3 inlcuding taking down unservicable wash hand basin and connected items, complete all as specified and directed. |
| 95 | S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 96 | M&L for cleaning and removing all scale and dirt, etc, from overhead PVC / RCC tanks of capacity exc 250 ltrs but not exc. 500 ltrs each and from mouths of circulating pipes, etc complete all as specified and directed. |
| 97 | M&L for cleaning and removing all scale and dirt, etc, from overhead PVC / RCC tanks of capacity exc 500 ltrs but not exc 1000 ltrs each and from mouths of circulating pipes, etc complete all as specified and directedNote:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ. |
