Military Engineer Services-MES has published Provision For Supply Of Stp Treated Water To Flush Tank In Airmen Billet And Sncos Living In Accn At Hqtc Bangalore . Submission Date for this Tender is 31-08-2022. Railway Ancillaries Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-08-2022 |
| Sl. No. | Item Description |
| 1 | S&F rotational moulded polyethylene water storage tanks, capacity in litres 1000 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 2 | S&F ball valves 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 3 | S&F 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 4 | S&F 15 mm three way ball volve/stop cock chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions, all as specified and as directed |
| 5 | Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified & directed. |
| 6 | S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern |
| 7 | M & L 15 mm dia GI pipe medium grade with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge. |
| 8 | M & L 20 mm dia GI pipe medium grade with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 10 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc. |
| 11 | M&L Glazed coloured ceramic tiles in vertical surface 450x 300x 7 mm/ 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the existing tiles colour /texture all as specified and as directed. |
| 12 | M&L Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match white or colour cement to match with the existing tiles colour /texture all as specified and as directed. |
| 13 | M&L Cutting holes in circular section for inserting uptp 40 mm diaGI pipe through verticle stone masonery walls of 400 to 600mm thickness by machanicle means and making good surface with filling holes with CM 1:4 if any gap is there complete all as directed. |
| 14 | Demolition of cement concrete (unreinforced) in in any description and in any position otherwise specifically provided for. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. |
| 15 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) in plinth courses, string courses,copings, kneelers, apex stones, bed plates, parapets etc complete all as specified nd directed. |
| 16 | M&L for pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete in walls all as specified and directed. |
| 17 | M&L for rendering 15mm thick cement plaster in cement morter 1:4 with on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement. |
| 18 | M&L for 2 coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces all as specified. |
| 19 | M&L for two coat of synthetic enamal paint over a coat of primer of any description n exc 10cm width or girth on steel surface including preparation of new/untreated surfaces all as specified. |
| 20 | Supply, install & testing and commissioning of fully automatic star/Delta starter in sheet steel enclosure typefor motor rating , 10 HP,3 phase, 415 volts, 50HZ, AC completecomplete all as directed & specified by Engineer in charge. Make:L&T, or equivalent of Havells/BCH. |
| 21 | S & F flat 3 core PVC insulated, Submerssible multistranded copper conductor cable of size 2.5 sqmm including necessary connections including taking out old unserviceable submersible connection cable complete all as specified and as directed by Engineer - in - Charge. Make: Finolex |
| 22 | Supply,install, testing and commissioning of submercibleopen well pump set 100 mm dia outlet electric driven of capacity 10 HP 3 phase, 415 volt, 50 HZ, AC supply complete Make Kirloskar including necessary clamps for fixing of suitable size all as specified and directed by Eng-In-Chagre. |
| 23 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core |
| 24 | Supply, installation, testing and commissioning ofoutdoor type , 3 Phase 440 Volts, 50 HZ, AC supply with bus bar chamber factory made enclosedfactory made, with 125 amps capacity bus bar 4 Nos mild steel sheet of thikness 3.15 mmand mild steel angle iron 50x50x6mm thick (frame) complete with openable shutters in front and rear having proper locking arrangement including 04 Nos legs made out of angle iron 75mm x 75mm x 6mm thick, height of each leg shall be 75 cm duly grouted in PCC. Panel shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and pre wired with suitable size of PVC insulated sheathed copper conductor cable complete in all respects and comprising of following accessories/fittings :- (a)MCCB 4 pole125 Amps, 415 Volt, rupturing capacity not less than 35 KA -01 Nos (I/C). (b)MCCB , 63 Amps,4 Pole415 Volt, AC, 35 KA = 03Nos (O/G). (c)Digital Ammetor of size 96 X 96 mm range 0 to 100 Amp Make : AE or equivalent of Make L&T with in built in selector switch complete with CT"s of appropriate ratio 01 Set. (d) Digital voltmeter of size 96 X 96 mm range 0 to 600 volts. L&T/AE/ABB/Semens with in built in selector switch - 01 set. (e) Phase indicating lamp = 03 Nos (R, Y, B). (f) Only sace for star delta stater3 phase 50 HZsuitable for 10 HP motor 2 Nos. |
| 25 | M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the Galvanised iron strip of size 32X6mm by means of bolts, nuts check nuts and washers of galvanised iron and steel earth strip protected by provision of GI light grade pipe 40mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) andframe of angle iron 40x40x6mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, |
| 26 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth and getting out in hard/dense soil for laying of cable trenches all as specified and directed. |
| 27 | Returning filling in, including spreading, levelling, watering and well ramming in layer not exc 25cmall as specified. |
| 28 | Removal of surplus soil(excavated soil) to distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point and all specified. |
| 29 | Supply and spread dry clean river sand in trenchesfor cable cushioning all as directed and specified. |
| 30 | Supplying and laying un-reinforced precast concrets cable cover class LV Type 1 flat size 250x150x40 MM |
| 31 | Supply, laying and testing of Ductile ironpipes, 80mm dia, class K-7, with spigot and socketed ends centrifugally cast (spun) with factory applied cement mortar lining inside the pipes and outside with zinc coating with suitable push on joint (rubber gasket D joint) all as directed and specified by Eng-in-Charge. Make: Electrosteel / Note: Excavation and earth work and DI specials where wherever required shall be measured and paid separately under relevant item of this schedule. |
| 32 | Supply and fixgalvanised water tubes, medium grade 50 mm dia including all fittings, laid in trenches complete all as specified and as directed. |
| 33 | Supply and fixgalvanised water tubes, medium grade 40 mm dia including all fittings, laid in wall/ ceiling/floors complete all as specified and as directed. |
| 34 | All as per item No 3 above but 25mm dia |
| 35 | All as per item No 3 above but 20mm dia |
| 36 | Supply and fix CI sluice valve of pressure Class PN - 1.6 flanged,80 mm dia and drilled at both ends with ISI mark, having steel spindle and gunmetal rings including wheel for operation all as specifedand all jointing materials, bolts, nuts, washers, etc, all as specifed and as directed including dismantling and taking up unserviceable of the following sizes complete:- |
| 37 | Supply & fixing in repair Gun-metal, globeor gate valves,50mm dia heavy duty, with iron wheel head, screwed both ends (ISI marked) complete all as specified & directed by Engr-in-Charge. MAKES –Zoloto/LEADER/Neta |
| 38 | Ditto All as per item No 37 above bu 40mm dia |
| 39 | Ditto All as per item No 37 above bu 25mm dia |
| 40 | Ditto All as per item No37 above bu 20mm dia |
| 41 | M&L cement concrete type B- 1, 1:2:4 using 20mm grade aggregatein mass concrete complete all as specified and directed. |
| 42 | M & L for construction of valve chamber of size 60cmx60cmx60cm internal size suitable for sluice valve with PCC 1:3:6 type (C2) (using 40mm graded aggregate) for foundation, one hollow block masonry wall in cement mortar (1:4), 40mm thickPCC (1:2:4) type B1 (using 20mm graded aggregate) coping, rendering in CM 1:4, 15 MM thick including provision of mild steel sheet cover of 3mm thick on 40x40x6 mm angle iron frame work emmbedded in concrete with suitable hinges and locking arrangements including two coats of black synthetic enamel black paint over a coat of red oxide zinc chrome primer to steel surfaces and including necessary excavation earth work on any type of soil etc. including removal of surplus soil and rubbish not exceeding 50m distance, including greel 1x1 fit complete all as specified and as directed. |
| 43 | Supply and fix spigote fittings, heavy duty, such as bends, tapers, tees,collars,tail pieces, reducers, etc laid and jointed with suitable push on joints complete upto 150 mm dia all as specified and as directed. |
| 44 | Boring of hole under road pavement hard standingupto1 mtr depth by trenches for pipe suitable for upto 150mm dia technology using ultra sound technique and necessary machine suitable for 0.4 mpa working pressure all as per directed by Engr-in -charge.Note- Surplus soil to a distance exc.50m and not exc 200 m and depositing at the location all as specified and directed. |
| 45 | S&F root indicator for treated water line for flush system of size 15cmx15cm made of GI plate with angle iron 20mmx20mm and 60cm long.Note PCC work paid separetly.all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
