Military Engineer Services-MES has published Repair To Water Pipe Line Rain, Water Pipe, Cleaning And Replacement Of Over Head Water Tank And Misc Plumbing Works At Omq And Repair / Maint Of Lt Ug Cable In Otm Accn ( Officer Mess Living-In-Billets, Mi Room, Snco Single Accn, Airment Mess, Vip. Submission Date for this Tender is 16-08-2022. Railway Ancillaries Tenders in hasimara West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Aug-2022 | CORRIGENDUM TO BOQ | BOQ | 16-08-2022 |
| 2 | 01-Aug-2022 | CORRIGENDUM TO CRITICAL DATES | Date | 16-08-2022 |
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description exc 1 sqm not exc 2 sqm each and removing from site, complete all as specified and as directed. |
| 2 | Taking down chowkats or frames of any description /material exc 1.5 sqm but n exc 4 sqm each with shutters without taking off shutters from frame and removing from site, complete all as specified and as directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and as directed. |
| 4 | Resecuring or easing & adjusting without taking down of shutter of any description exc 1 & n.exc 2 Sqm, complete all as specified and as directed. |
| 5 | Demolition of brick work built in cement mortar including all quoins arches,pillars etc. and removing rubbish off the premises, complete all as specified and as directed. |
| 6 | Demolition of cement concrete (unreinforced) of any description in any position and removing rubbish off the premises, complete all as specified and as directed. |
| 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided and removing rubbish off the premises, complete all as specified anddirected |
| 8 | M & L brick work with sub class "B"bricks, straight or curved on plan exc 6m mean radius built in CM(1:6), complete all as specified and as directed. |
| 9 | M&L for brick work with sub class "B" bricks straight or curved on plan to any radius, built in CM (1:4)as in half brick thick wall including provision of 02 Nos 8mm TMT bars at every fourth course, complete all as specified and as directed. |
| 10 | Taking down cement plaster on brickor concrete surfaces incl racking out joints hacking for key scrubbing downwith water etc and removing rubbish off the premises, complete all as specified and as directed. |
| 11 | M&L 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 12 | M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar (1:4),mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturer"s instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 13 | M&L 5mm thick rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces, rendering finished even and smooth (without using cement) as in ceiling complete all as specified and as directed. |
| 14 | Cleaning the surfaces of plaster using wire brush , brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (Pidifine 2K) @ 0.50 kg/sqm, complete all as specified and as directed. |
| 15 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces,guided rail etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixinge Fe 410W Gde E-250 quality A, complete all as specified and as directed. |
| 16 | S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 17 | S&F factory made solid wire gauzed i.e. panel will be of wire gauze pvc doorshutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Single Side Prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail; i.e. panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and as directed. |
| 18 | S&F factory made solid PVC moulded door shutter with wood board core free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site, complete all as specified and as directed. |
| 19 | S&Fixed in repairs Mild streel helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed. |
| 20 | S & F in repairs floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overal length of cover plate, complete all as specified and as directed. |
| 21 | S&F aluminium, anodised, barrel tower bolts of extruded section of 150mm long, complete all as specified and as directed. |
| 22 | S&F aluminium handle 125mm long cast type anodised ("D" shaped), complete all as specified and as directed. |
| 23 | S&F 105X60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc, complete all as specified and as directed. |
| 24 | S&F 125X60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc, complete all as specified and as directed. |
| 25 | Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing rubbish off the premishes, complete all as specified and as directed. |
| 26 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 27 | M&L for non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 28 | M&L for virified ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM(1:6), complete all as specified and as directed. |
| 29 | M&L vitrified heavy duty full body digital paving tile 10mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed (1:6), complete all as specified and as directed. |
| 30 | M&L for glazed ceramic coloured tilesin vertical surfaces 350x250x7mm/450x350x7mm thick as in skirting or dado on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster as in backing of tiles in CM(1:4), complete all as specified and as directed. |
| 31 | M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor., complete all as specified and as directed. |
| 32 | M & L for PCC type B1 (1:2:4) (using 20mm graded crushed stone aggregate) in roof kerbs, mud stops or chamfered on edges, complete all as specified and as directed. |
| 33 | M&L for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternatebays (n exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and as directed. |
| 34 | M&L PCC 1:2;4 type B2 (using 40mm graded crushed stone aggregate) as in surface channel and drain all as specified including necessary formwork, complete all as specified and as directed. |
| 35 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc., complete all as specified and as directed. |
| 36 | M&L for one coat of white washing on old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots, complete all as specified and as directed. |
| 37 | All as per item No 36 herein before but ceiling, soffits of slabs, chajj etc, complete all as specified and as directed. |
| 38 | M&L for threecoats of white washing on newly plastered surfacesof wall including preparation of surfaces, complete all as specified and as directed. |
| 39 | M&L threecoat of white washing on newly plastered surfacesof ceiling including preparation of surfaces, complete all as specified and as directed. |
| 40 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed. |
| 41 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over complete removal of existing treatment of old surface of wall, complete all as specified and as directed. |
| 42 | M&L for applying two coats of cement base paint over a coat of alkali resistant primer to new plastered surfaces of wall including preparation of surface, complete all as specified and as directed. |
| 43 | M & L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts andapplying one coat of cement base paint on surface of wall/chajja, complete all as specified and as directed. |
| 44 | Complete removal of existing treatment of any type from walls, complete all as specified and as directed. |
| 45 | M & L for applying 1.5mm thick wall care putty on wallsto obtain a smooth surface including making good any undulations on the surfaces, complete all as specified and as directed. |
| 46 | M&L preparation of old decorated wall surface by washing down, rubbing down and stopping of distempered and painted surface and including applying one coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, complete all as specified and as directed. |
| 47 | M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed. |
| 48 | M&L one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces, complete all as specified and as directed. |
| 49 | M&L preparation of new steel or Iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 50 | M&L one coat of synthetic enamel paint (1st grade quality) to old decorated wooden surfaces of girth exc 10cm width or girth incl preparation of surfaces, complete all as specified and as directed. |
| 51 | S&F 6 to 8mm dia TMT bar cut to length bend to shape required inclbending hooking ends and binding with MS wire (annealed)not less than 0.90mm dia as in reinforcement, complete all as specified and as directed. |
| 52 | MS TMT bars 10mm and over dia cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90 mm dia (annealed), complete all as specified and as directed. |
| 53 | Form work to fins, chajja, lovers, facia and the like, complete all as specified and as directed. |
| 54 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work: not exceeding 200mm thick (horizontal or sloping), complete all as specified and as directed. |
| 55 | M&L RCC 1:2:4 type B1 (using 20mm graded crushed aggregate) as in chajja slabs supported on walls, beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like including necessary demolition, complete all as specified and as directed. |
| 56 | Taking down 20mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and as directed. |
| 57 | Re-fixing old steel tubing and connection 20mm bore in new or old position complete on wall/ceiling, complete all as specified and as directed. |
| 58 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. (Note :- The rate includes all plain CPVC fittings mean fittings which do not have any metal component ( ebow, tee, socket, reducer, bushing, step over bends, end cap, end plugs etc) and pipe cutting fixing with CPVC solvent cement and testing. The special fittings [CPVC brass fittings (brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc), unions, ball valves, flange and tank adaptor] shall be paid under respective items. |
| 59 | S&F CPVC 20mm dia of brass elbow, complete all as specified and as directed. |
| 60 | S&F CPVC 20mm dia brass elbow (3/4 X ½), complete all as specified and as directed. |
| 61 | S&F CPVC 20mm dia brass tee, complete all as specified and as directed. |
| 62 | S&F CPVC 20mm dia male brass threaded adaptor (MTA/ MBTA), complete all as specified and as directed. |
| 63 | S&F CPVC 20mm dia female brass threaded adaptor (FTA/ FBTA), complete all as specified and as directed. |
| 64 | S&F CPVC 20mm dia tank adaptor, complete all as specified and as directed. |
| 65 | S&F CPVC 20mm dia union, complete all as specified and as directed. |
| 66 | S&F CPVC 20mm dia ball valve, complete all as specified and as directed. |
| 67 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth of brick wall, complete all as specified and as directed. |
| 68 | S&F in repairs 15mm bore fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipe or union, complete all as specified and as directed. |
| 69 | S&F in repair vitreous china squatting pan ,"orissa pattern"white, size 580x 440 mm with integral foot rest,"P" or "S" trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and as directed. |
| 70 | S&F vitreous china wash hand basin white flat back of size 550x 400mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and as directed. |
| 71 | Fixing only in repairs wash basins vitreous china (flat back or angle back type) any size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and as directed. |
| 72 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of oldwater tank, complete all as specified and as directed. |
| 73 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltr capacity including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of oldwater tank, complete all as specified and as directed. |
| 74 | Disconnecting existing exceeding 500 ltr but not exceeding 1000 ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (cleaning repairing, etc. measured separately), complete all as specified and as directed. |
| 75 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc 250 ltr but n exc 500 ltr capacity PVC water storage tank, complete all as specified and as directed. |
| 76 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc ofexc 500 ltr but n exc 1000 ltr capacity PVC water storage tank, complete all as specified and as directed. |
| 77 | S&F PTMT Nipple 20mm suitable for HDPE water tank. (minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms), complete all as specified and as directed. |
| 78 | S&Fin repair 20mm boreball valves high pressure of PTMT withepoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm ), complete all as specified and as directed. |
| 79 | S&Fin repair tank cover suitable for any type of Rotational moulded polyethylene water storage tanks, complete all as specified and as directed. |
| 80 | PVC connection 15mm size with PTMT Nuts of length 450mm, complete all as specified and as directed. |
| 81 | S&F PVC waste pipe for urinal/ WHB 32mm/ 40mm bore with one end with socket, complete all as specified and as directed. |
| 82 | S&F in repair CP pillar tap 15mm bore with capstan head, screweddown high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 83 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle, complete all as specified and as directed. |
| 84 | Fixing only in repairs high or low level flushing cistern and connections to pipes and fixing of chain and pull or lever if any, complete all as specified and as directed. |
| 85 | S&Fin repair PVC moulded mirror of size 60 x 60cm selected quality mounted on particle board, complete all as specified and as directed. (Make: Prayag Cat No 553-F or equivalent model of make Parryware/Cera/Johnson) |
| 86 | S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 87 | S&F in repair Swivel shower rose of brass chromium plated 125 mm size with long head arm for fixing with 15mm pipe. complete all as specified and as directed. |
| 88 | S&Fin repair two way angular stop cock15mm bore chromium plated, complete all as specified and as directed. |
| 89 | S&F in repairs vitreous china EWC (padestal pattern) white "P" or "S" trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed. |
| 90 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified |
| 91 | S&Fin repairs plastic water closet seat cover white, closedpattern with flat bottom and cover and mild steel CP hinges for pedestal pan, complete all as specified and as directed. |
| 92 | S&F in repair, CP toilet paper holder, with cover white, box type, white with CP screws, complete all as specified and as directed. |
| 93 | S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches, complete all as specified and as directed. |
| 94 | S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed. |
| 95 | S&Fin repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 96 | S&F in repair PVC (SWR) junction, single, (single T) equal or unequal 110mm bore, complete all as specified and as directed. |
| 97 | S&F in repair 75mm bore, PVC (SWR) bends provided with access door of any radius, complete all as specified and as directed. |
| 98 | S&Fin repair 75mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and as directed. |
| 99 | M &L 75mm diaPVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs, complete all as specified and as directed. |
| 100 | S&F CP grating 100mm dia with or without waste hole, fixed to floor trap in repair, complete all as specified and as directed. |
| 101 | S&F in repairangular stop cock 15mm bore chromium plated, complete all as specified and as directed. |
| 102 | S&F welded steel wire fabric of weight n exc 4 kg/Sqm complete to wood or steel members, complete all as specified and as directed. |
| 103 | S&F in repair of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fixed with tinned tracks incl wooden beads, complete all as specified and as directed. |
| 104 | S&F in repair bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe & fixed (minimum weight 15mm-90gms), complete all as specified and as directed. |
| 105 | S&F in repair of 3-in-1 wall mixer chromium plated fancy type, complete all as specified and as directed. |
| 106 | S&F in repair of Central hole basin mixer chromium plated fancy type, complete all as specified and as directed. |
| 107 | S&F in repair stainless steel plate rack of size 0.75 x 0.78m, complete all as specified and as directed. |
| 108 | S&F rubberised dood cill width exc 30mm but n.exc 50mm, complete all as specified and as directed. |
| 109 | Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m but n.exc. 3m deep for foundation, etc, and getting out in soft/loose soil, complete all as specified and directed. |
| 110 | Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm in soft/loose soil, complete all as specified and directed. |
| 111 | Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed. |
| 112 | Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mmdia conformingto IS, approved colour complete with fittings for cable protection, complete all as specified and as directed. |
| 113 | All as per item No 112 here-in-above but 50mm dia, complete all as specified and as directed. |
| 114 | M & L for galvanizediron tubing 40mm bore (light grade) with all fittings for protection of cables, laid in trenches, complete all as specified and as directed. (Note : Excavation and earth work will be measured and paid separately ) |
| 115 | All as per item No. 114 here-in-above but 80mm bore (light grade), complete all as specified and as directed. |
| 116 | Taking down/out unserviceable UG cables of cross sectional area and connections including bricks, GI Pipes, etc of any description, laid in trenches and/or fixing with walls/poles, complete all as specified and as directed. |
| 117 | Taking down/out unserviceable UG cables of any cross sectional area and connections including bricks, GI Pipes, etc of any descriptions, laid in trenches and/or fixing with walls/poles and relaying the cable after repair/ replacement of LT Joint including connecting to the DB/panel etc, complete all as specefied and as directed. Note : Rate for earth work and LT Joint will be measured and paid seperately in the respective item of schedule. |
| 118 | M&L for straight through joints (epoxy) cable joint kit including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 16 to 35 sqmm 3.5/4.0 core and testing, complete all as specefied and as directed. |
| 119 | M&L straight through joints (epoxy) cable joint kit including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 50 to70 sqmm. 3.5 core and testing, complete all as specefied and as directed. |
| 120 | M&L straight through joints (epoxy) cable joint kit including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 95 to120 sqmm. 3.5 core and testing, complete all as specefied and as directed. |
| 121 | S&F busbar chamber factory made CPRI approved suitable size forset of 04 aluminium busbar 400 Amps rating ,supported with suitable size as per direction, each of heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral, The Chambershall be fixed60 cm above the normal ground level complete with PCC foundation (1:2:4 )type B2,completeall as specified and directed. |
| 122 | M&L for XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 16 sqmm 4 core, complete all as specified and as directed. (Note : Excavation and earth work shall be measured and paid separately under respective items) |
| 123 | All as per item No 122here-in-above butsectional area 35 Sqmm 3.5 core, complete all as specified and as directed. |
| 124 | All as per item No 122here-in-above butsectional area 50 Sqmm 3.5 core, complete all as specified and as directed. |
| 125 | M & L for horizontal boring under the road below 1mtr from the road surface (with manual method) and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and as directed. |
| 126 | M & L for cable route indicator made out of CI 15cm dia disc shaped with embossed letter (LT Cable) Fixed to MS angle iron 40 x 40 x 5mm and 1 Mtr long embeded in ground with PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) of size 250 x 250 x 200 mm, complete all as specified and directed. |
| 127 | M&L for paintingsteel tubular poles, 8.5 meter height above GL including cross arms & bracings on existing surface after cleaning and removing dust, rust & dirt with one coat of red oxide primer and two coats of aluminium paint and painting with black & white alternate strips of 30cm each externally from ground level up to 1.5 mtr with synthetic enamel paint (ISI grade quality), numbering of pole(MES/SL-Number) and white wash on pole coping, complete all as specified and directed Note: An amount of Rs.30227.00 on account of credit schedule for schedule "A" part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
| 128 | Supply and fixing energy efficient ‘LED Flood Light120 W LED luminairewith Aluminium dia cast housing, toughened glass cover with IP 66 protection, CCT 5700 K including fixing arrangment on wall/pole / surface and connecting cable up to nearest ceilign rose into flexible PVC conduit. Make : Crompton/Havells/ Surya/Philips |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
