Construction Of Remaining Work At P.H.C., Kapsad, Meerut.- 1 Excavation In Foundation In Ordinary Soil ( Loan Clay Ot Sand ) Including Lift Upto 1 50 Meters And Lead Upto 30 Mitr. Including Filling Watering And Tranming Of Excavated Earth In The Tr, meerut-Uttar Pradesh

Construction Of Remaining Work At P.H.C., Kapsad, Meerut.- 1 Excavation In Foundation In Ordinary Soil ( Loan Clay Ot Sand ) Including Lift Upto 1 50 Meters And Lead Upto 30 Mitr. Including Filling Watering And Tranming Of Excavated Earth In The Trenches Of The Building Between The Building And The Sides Of Foundati Trenches Or In The Plinth And Extraction Of Disposal; As Directed By The Engineer Incharge, The Foundation Trenches From 30M ( Including Royality ) 2 Fillingof Carted Earth Incide The Plinth Including Cartage From A Distance Not Less Than 8 Kms Also Including Levelling Dressing Watering & Ramming Complete & Cost Of Earth & Royality Etc. 3 Sand Filling In Plinth Including Supply Of Necessary Quantity Of Sand From A Distance Not Excluding 8Km From The Site Of Work And Including Watering Dressing Etc. Rate To Include Cost Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. 4 Providing And Layingin Cement Concrete 1:4:8 ( 1 Cement :4 Coarse Sand :8Stone Ballast 40 Mm Nominal Size ) And Curing Complete, Including Cost Ofform- Work, In Foundation And Floors Complete Including Cost Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. 5 Cement Concrete 1:1.5:3 ( 1 Cement : 1.5Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size ) In Pavements, Laid To Required Slope And Camber In Panels As Required Including Consolidation Finishing And Tamping Complete. 6 Providing And Laying In Position Bitumen Hot Sealing Compound For Expansion Joints Etc. Dsr- 16.46.1Using Grade A Sealing Compound. 7 Contruction Of Apron Drain ( 150*150 Mm Size, For 1.00M. Length ) 8 Providing And Injecting Chemical Emulsion For Constructional Antitermite Treatment And Creating A Chemical Barrier Under And Alround The Column Pits. Wall Trenches Basement Excavation Top Surface Of Plinth Fillingjunction Wall And Floor Along The External Perimeter Of Binding Expansion Joints, Surrounding Of Pipes And Conduit Etc Complete ( Plinth Area Of Building At Ground Floor Only, Shall Be Measured As Per 6313 ( Part Ii 1981 ) Excluding Gst. Aldrine Emulsifiable Concen-Trate Any Other Approved Material Such As Heptrachlor Or Chlordance Will Be Used. The Rate Of Application Of Chemical Emulsion Shall Be As Follows: ( 1 ) Treatment For Masonry 8 Foundation 5 Liters Per Sqm. ( 2 ) , Back Fill In Immediate Contact With Foundation 7.50 Liters Per Sqm. ( 3 ) Treatment Of Top Surface Of Plinth Fillings 5 ??Liters / Sqm. ( 4 ) .Treatment Ofsoil Along External Perimeter Of Building 7.50 Liters / Sqm. ( 5 ) . Treatment Of Soil Under Apron Along With External Perimeter 5 Liters / Sqm. 9 First Class Brick Work In 1:4 Cement And Coarse Sand ( Fm 1.50 To 2.20 ) Mortar Infoundation & Plinth Including Supply Of All Materials, Labour And T & P Etc. 10 First Class / Class 150 Brick Work In1:6Cement And Coarsesand ( Fm 1.50 To 2.20 ) Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Propercompletion Of The Work. 11 R.C.C. Work With Cement Approved Coarse Sand And 20 Mm. Guage Approved Stone Grit Im The Proportion Of 1:1.5:3 In Lintels Of Doors And Windows Excluding Supply Of Reinforcement And Its Fixing And Binding The Same With 24 Bwg Binding Wire And Including Necessary Centering And Shuttering Etc.And Also Including Supply Of All Materials, Labour And Tools And Plants Etc, Required For Proper Completion Of The Works. Strength Of The Concrete Shall Not Beless Than M-20. 12 Same As In Above Item But For Slabs ( Using 1:1.5:3 Mix Concrete ) 13 Same As In Above Item But For The Lighterbeams I.E. Having Spans Upto 6 M. ( Using 1:1.5:3 Mix Concrete ) 14 Same As In Above Item But For Footing ( Using 1:1.5:3 Mix Concrete ) 15 Same As In Above Item But For Column ( Using 1:1.5:3 Mix Concrete ) 16 Cast Cement Concrete Door Sills, Chaukhats, Boundary Posts Shelves And Similar Small Work With Cement, Approvedcoarse Sand And 2 Cm Gauge Stone Grit In Proportions Of 1:2:4 Excluding Its Fixing And Binding The Same With 24 B.W. G.G.I., Binding Wire, Moulds, All Materials Labour, Tools & Plants Etc. Required For Proper Completion Of The Work. The Rateexcludes Making Of Drip Course Which Shall Be Paid Extra. 17 First Class / Class 150 Brick Work In1:6Cement And Coarsesand ( Fm 1.50 To 2.20 ) Mortar In Super-Structureincluding Necessary Cutting And Moulding Of Brick Work As Required And Also Includinghoney Combed Brick Work In Thickness Of Wall More Than 12Cms.Including Supply Ofall Materials, Labourand Tools And Plants Etc. Requiredforpropercompletion Of The Work. 18 First Class / Class 150 Brick Work In1:4Cement And Coarsesand ( Fm 1.50 To 2.20 ) Mortar In Super-Structureincluding Necessarycutting And Mouldingofbrickworkas Required Andalsoincludinghoney Combed Brick Work In Wall Thickness 12 Cms & Below..Including Supply Ofall Materials, Labourand Tools And Plants Etc. Requiredforpropercompletion Of The Work. 19 Painting On D.P.C. With Two Coats Of Air Blown Bitumen Vg-10 Grade @ 1.70 Kg / Sqm Approximate Including Cost Of Fuel If Any. 20 Providing And Laying Brick Koba 12 Mm Thick Laid With M-150 Class Brick Bat Coba 7.50 Cm Thick With Gap Of 15 Mm To Each Other Over 20 Mm Thick Base Of Cement Mortar 1:4 Cement And Course Sand Mixed With Water Proofing Compound Preading Cement Slurry Mixed With Aereclic Cement Concrete Water Proofing Compound Filled Gaps Of Coba & Top Of Coba Mortar Finished Smooth & Top Mashed False Square 30 Cm Xcm And Side Wall Parapet Shall Be Mono Tythic Plaster Wall Upto 30 Cm Higher And Junction And Corner Shall Be Rounded By Brick Ballast And Course Sand Masonary Coba With Top Finshed Plaster Mixed With Acetic Water Proofing Compound @ 2% By Weight & Including S / O All Material, Labour, T&P Etc Complete For Proper Comletion Of The Work. 21 Supply And Fixingof Flushdoors Commercialqualityconformingtoi.S.2202 Part I ( 1983 ) Includingfixingof Wooden Cleats And Stoppers And Including Fixing And Adjustment Of Hinges, Bolts, Locks, Handle, Springs And Other Fitting With Necessary Screws Complete. 35 Mm Thick 22 Mild Steel Or Iron Workofsmall Sizes And Sections Suchand Holding Down Bolts, Holdfasttierods, Gratings Etc. ( When Notincludedinan Overall Rates ) Wroughttorequiredfromincluding Supply Ofsteel Anditswastage Includingcostof Bolts, Nuts If Required Forandwelding, Grinding And Making Holes As Required Completion Of Workfabricationofholesdoors, Chaukhats Nosing. ( A ) Fabrication Of Holdfast & Door Chaukhat. 23 ( B ) Same As In Above Item But For Fabrication Of Grill / Stairscase Railing / Gate. 24 ( C ) Same As In Above Item But For Fabrication Of Z-Section Steel Windows.Openable 25 Providing And Fixing Fly Proof Galvanized M.S. Wire Gaugeto Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm All Complete With 12 Mm Mild Steel U Beading 26 Providing And Fixing Wire Gauge Shutters Using Galvanized M.S. Wire Gauge Of Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm, For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws :35 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size Kiln Seasoned And Chemically Treated Hollock Wood 27 Supply And Fixing Of 24 Guage Aluminium Sheet On Toilet Door Shutters Bottom Including Fixing With Aluminium Greves, Labour Including Labour T&P Etc Required For Proper Completion Of The Work 28 Mild Steel Or Iron In Plain Work Such As Rcc Or R.B. Work Wrought To Required Shape As Necessary Including Bending For Proper Competition Of The Work And Including Supply Of All Steel & Wastage And Over Lapping And Hooks. 29 Fixingofsteelorwoodenchaukhats In Position. ( A ) Door Chaukhats Window Chaukhats Above 1.5 Sqm. And Upto 3.0 Sqm. 30 ( B ) Same As In Above Item But For Window Chaukhats Up To 1.5 Sqm 31 ( C ) Same As In Above Item But For Ventilator Chaukhats 32 12Mm Thick Plaster With 1 Cement : 6 Course Sand Over Brick Work, Minimum Thickness Not To Be Less Than 3 / 8 ( 10Mm ) Thick Including Supply Of All Materials, Labour And Tools And Plants Etc Required For Completion Of The Work. 33 12 Mm Cement Plaster On Rough Side With 1 Cement : 6 Course Sandover Brick Work, Minimum Thickness Not To Be Less Than 3 / 8 ( 10Mm ) Thick Including Supply Of All Materials, Labour And Tools And Plants Etc Required For Completion Of The Work. 34 12 Mm Bearing Plaster 1 Cement:6 Coarsesand 35 Making Grooves 10 To 12 Mm Wide X 8 Mm Deep In Plaster Of The Wall Or In Celling Vertically Or Horizontally As Required. 36 Making Drip Course In Sun Shade Facia As Per Direction Of Engineering Charge Including Supply Of All Material Labour Etc. Required For Proper Completion Of The Work. 37 Supply And Fixing 6 Mm ( 1 / 4 ) Thick China White Glazedtiles Inflooringorin Skirting Or Dado Laid With1:3 Cement And Approved Coarse Sand Mortar Finished With Whitecement Slurry Jointing And Polishing Complete Includingsupplyof Allmaterials, Labour And Tool Sand Plantsetc.Required Forproper Completion Of The Work. Excluding Gst. 38 2.5 Cm Thick 1:2:4 Plain Cement Concretefloor With Cement Approved Coarse Sand And 2Cm. Graded Approved Stone Ballast Laid In Planels Finished With 3Mm ( 1 / 8 ) Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5:1 As Specified Over And Including 8 Cm. ( 3 ) Local Sand And Brick Ballast 4 Cm. Gause In Proportion Of 1:4:8 And Removing Any Giving Then A Uniform Finish, Including Supply Of All Materials, Labour, T&P Etc. Required For Proper Completion Of The Work. But Without Base Concrete. 39 Cement Concrete Flooring 1:2:4 ( 1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size ) Laid In One Layer Finished With A Floating Coats Neat Cement ( 40 Mm Thickfloor ) . 40 2 Cm. ( 3 / 4 ) Thick Cement Plaster In Dedo Or Skirting In 1:2 Consisting Of One Part Of Cement And 2 Parts Of Approved Coarse Sand Laid In Pannels, Finished With 3 Mm ( 1 / 8 ) Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5 1 Including Supply Of All Materials Labour And T & P Etc. Required Proper Completion Of The Work 41 Providing And Laying 25 Mm Kota Stone Flooring Over 20 Mm Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid Over Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of Slab Including Rubbing And Polishing Complete. 42 Providing& Laying Of Vitrified Tiles Of 600 Mm X 600 Mm Size ( Thickness 10 Mm ) With Water Absorption Less Than .08% And Conforming To Is: 15622, Of Approved Brand & Manufacturer, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive ( Water Based ) Conforming To Is15477 Including Grouting Of Joints. 43 18 Mm Thick Marble Tiles In Rises Of Step Skirting Dado Wall And Pillars Laid On 10Mm Thick Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Jointed With Gray Cement Slurry Mixed With Pigment To Match The Shade Of Slab Including Rubbing And Polishing Complete. 44 Painting Or Varnishing Work In Small Areas Or New Wood Work With One Coat ( Upto One Sqm Of Ready Mixed Priming Paint And One Coat Of Approved Superior Quality Ready Mixed Paint Or Varnish Including Supply Of All Materials, Labour Toolsandplants Etc. Required Forpropercompletion Of The Work. Piant To Be Used Isi Marked. ( For Two Coat ) 45 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade :New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) ( Apex Ultima, Weather Coat All Guard ) Assian, Berger. 46 Finishingwallswith Water-Proofing On Cementpaint Of Approvedmakesuch As Super Snowcem, Durrocem, Robiacem, Guttucem Supercem Qualityandof Required Shade On Undecorated Wall Surfaces ( Two Coat ) Overone Andincludingonecoatwhite Cementprimertogiveaneven Shade After Thoroughly Brushing The Surface To Powdered Materialsincluding Curing And Cost Of All Materials. 47 One Priming Coat And One Coat Oil Distemper On New Work Incliding Supply Of All Materials, Labour And T&P Required For Proper Completion Of The Work ( For Two Coat ) 48 Finishing Wall With Acrylic Emulsion Paint Of Approved Brand And Manufacture And Of Required Shade And Undecorated Wall Surface To Give An Even Shade Over Including Curing And Cost Of All Material, Labour, T&P Etc. Required For Proper Completion Of The Work For Two Coat. 49 Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With : With 4.0 Mm Thick Glass Panes. 50 Providing And Fixing Glass Strips In Joints Of Terrazo / Cement Concrete Floors. 51 Providing Stainless Steelsliding Bolts16 Mm Dia With Nuts And 250 Mm Long. 52 Providingstainless Steel Towerboltwith10 Mmdia And Screw.300 Mm Long 53 Providing And Fixing Stainless Steel Handle With Screws Etc. Complete ( A ) 150 Mm 54 Providing And Fixing Oxidised Sliding Door Bolts Isi Marked Anodisedwith Nuts And Screws Etc. Complete : 300X16 Mm 55 Providing And Fixing Oxidised Tower Bolts Isi Marked Anodisedwith Necessary Screws Etc. Complete :250X10 Mm 56 Providing And Fixing Oxidised Handles Isi Marked Anodisedwith Necessary Screws Etc. Complete : 100 Mm 57 Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40 Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer 58 Providing And Laying 80Mm Thick Factory Madeinter Locking C.C. Paver Block Of M -30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. 59 Water Supply And Sanitary :-Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Isi Marked White Solid Plastic Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. 60 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fitting And Fixtures Completed Including Cutting And Making Good The Walls And Floors Wherever Required.White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440mm With Integral Type Foot Rests. 61 Providing & Fixing White Viterous China Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standardpattern, Including Painting Of Fitting And Brackets, Cutting & Making Good The Walls Wherever Required. Flat Back Wash Basin Size 550X400 Mm With Single 15Mm C. P. Brass Pillar Tap 62 Providing And Fixing Flexible P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete.32 Mm Dia ( For Wash Basin ) 63 Same As In Above Item But For 40 Mm Dia ( For Sink And Urinal ) 64 Providing & Fixing 600 X 450 Mm Bevelled Edge Mirror Of Superiorglass ( Of Approved Quality ) Complete With 6Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 65 Providing & Fixing Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink As Per Is:13983 With C.I. Bracketsandstainless Steel Plug 40 Mm Including Painting Of Fittings And Brackets Cutting And Making Good The Walls Wherever Required. 610 X 460 Bowl Depth 200 Mm 66 S / F Of Upvc Swr Pipe Type -B Confirming To Is -13592 Incluiding Jointing The Pipes With Rubber Ring Lubricant And Upvc Swr Cuplar Confirming To Is 14735 Also Inluiding Excavation Of Treches Cutting Of Walls And Holes And Repairing Of Walls , Floors And Refilling The Trenches As Before Cut Including Cost Of Other Fittings Such As Door Band, T And Yt Including Supply Of All Materials Labour And T&P Required For Prper Complition Of The Work.110Mm Dia Swr Pipe 67 Same As Above Item But For 90Mm Dia Swr Pipe 68 Same As Above Item But For 160Mm Dia Swr Pipe 69 S / F Of Upvc Swr Nahani Trap Size100 / 90Mm Confirming To Is -14735 Self Cleaning Design Fixed In Pcc 1:2:4 And Supply And Fixing Of 125 Mm Dia Heavy Duty Cp Brass Jali. 70 Laying Cement Concre 1:5:10 In Haunching S.W. Pipes Including Concrete For Bedding Necessary Form Work And During Complete.100 Mm Dia 71 Same As Above Item But For 150Mm Dia 72 S / F Of Upvc Swr Cowel Confirming To Is -14735 110 Mm 73 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. 74 Providing And Fixing Of Chlorinated Polyvinyle Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings, Inluding Fixing The Pipe With Clamps At 1 M. Spacing . This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work Exposed On Wall.25Mm Dia Nominal Bore 75 Same As In Above Item But For 32Mm Dia Nominal Bore 76 Providing And Fixing Of Chlorinated Polyvinyle Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings, Inluding Fixing The Pipe With Clamps At 1 M. Spacing . This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work Including Cutting Chases And Making Good The Wall Etc.20Mm Dia Nominal Bore 77 Same As In Above Item But For 25Mm Dia Nominal Bore 78 Providing And Fixing Of Chlorinated Polyvinyle Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement, Trenching , Reifilling And Testing Of Joints Complete As Per Engineer In Charge. External Work.25Mm Dia Nominal Bore 79 Same As In Above Item But For 32Mm Dia Nominal Bore 80 Providing & Fixing Gun Metal Gate Valve With C.I. Wheel Of Approvedquality ( Screwed End ) 25 Mm Nominal Bore 81 Providing And Fixing Ballvalve ( Brass ) Of Approved Quality Complete. ( High Or Low Pressure With Plastic Floats ) .15 Mm Nominal Bore 82 Providing&Fixing15 Mm Nominal Bore45 Cm Long Unplasticised Pvc Connection Pipewith Brass Unions. 83 Providing & Fixing 15 Mm Nominal Bore Cp Brass Bib Cockof Approved Quality Conformingtois 8931. 84 Providing And Fixing 15 Mm Nominal Bore C.P Brass Long Nose Bib Cock Of Approved Qualityconforming To Is Standardsandweighing Notlessthan 810 Gms. 85 Providing & Fixing 15 Mm Nominal Bore C.P. Brassstop Cock ( Concealed ) Of Standard Designandof Approvedmakeconforming To Is : 8931. 86 Providing & Fixing 15 Mm Nominal Bore C.P Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conformingto Is8931. 87 Providing & Fixing 100 Mm Dia C.P Brass Shower Rose With 15Mm Inlet. 88 Suppling And Hoisting Of Sintex Or Equivalent High Density Polythylene Seamless Of Piece Moulded Tanks And Placing The Same In Proper Position Including All Materials, Lbours And T & P Etc. For Proper Completion Of The Work. Tank Should Be Isi Marked, Sintex Or Equivalent And I / C All Taxes.500Litrescapacity 89 Providing And Fixing Square Mouths. W. Gully Trapgrade `A Complete With C.I. Gratingbrickmasonry Chamber With F.P.S Bricks And Water Tight Ci Cover With Frame Of 300 X 300 Mm Size ( Inside ) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design. 150 X 110 Mm. Size P Type 90 Providing & Fixing 450 Mm Long C. P. Brass Towel Railcomplete With C.P. Brass Bracketsfixedtowoodencleats With C.P. Brass Screw. 91 Providing & Fixing Isi Marked ( Is : 778 ) Brass Gatevalve ( Class 1, Pn - 1 Mpa ) With Wheel Of Approvedquality ( Screwed End ) . 15 Mm Nominal Bore 92 Same As In Above Item But For 20 Mm Nominal Bore 93 Providing & Fixing Of Medium Class Pvc Spout Up To 300 Mm. Length Including Cutting And Making Good The Walls And Floors Etc. As Required. 50 Mm Dia 94 Providing And Fixing Of Chlorinated Polyvinyle Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement, Trenching , Reifilling And Testing Of Joints Complete As Per Engineer In Charge. External Work.40Mm Dia Nominal Bore 95 Same As In Above Item But For 50Mm Dia Nominal Bore 96 Providing & Fixing Gun Metal Gate Valve With C.I. Wheel Of Approvedquality ( Screwed End ) .50 Mm Nominal Bore 97 Construction Of Sewer Connecting Chamber Having Internal Size 60 X 60 X 60 Cm Constructed In Class 150 Brick Work In 1:6 Cement And Coarse Sand Mortar, 10 Cm Thick Pcc 1:4:8 In Base And Internal Side Plasterred With 1:3 Cement And Coarse Sand Mortar Including A Floating Coat Of Neat Cement And 2.5 Cm Thick Pcc 1:2:4 Flooring Of Chamber And 5 Cm Thick Top Cover In Rcc 1:1.5:3 Including Reinforcement Steel ( Analysis Rate ) 98 Internal Electrificationwiring Point For Light With 1 Sq. Mm Fr Pvc Insulated Multistrand Single Core Copper Conductor Cable In Heavy Guage Pvc Conduit Pipe Partly Concealed In The Wall And Partly Laid In Slab With 1.5 Sq. Mm Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Wire Drawn Inside Of Pipe, Piano Type Switch And Ceiling Rose / Angle / Batten Holder On 3 Mm Thick Phenolic Paminated Backalite Sheet Etc. Switches Shall Be Fixed On Suitable Size Ms Box Shunked In Wall With 3 Mm Thick Phenolic Paminated Backalite Sheet And Brass Screws And Washers Complete In All Respect As Directed By Engineering-In-Charges Including Matching Colour Wash. 99 Same As Above Item But For Fan And Fresh Air Fan. 100 Same As Above Itembutfor 5Ampplug Point With Piano Type Switch & Socket Etc. 101 Same As Above Item But For Call Bellwith Piano Type Switch Or Socket Etc. 102 Supply And Fixing Of Power Plug With 15A / 240V Flush Type Switch And 5 Pin 15A / 250 V Flush Type Universal Socket In Suitable Ms Box Of 175 Mm X 100 Mm X 50 Mm Size With Henolic Laminated Bakelite Sheet Cover 3 Mm Thick Fixed With Brass Machine Screw And Cup Washer. 103 Suppply And Wiring Of Submain 2 Number 2.5 Sqmm Fr Pvc Insulated 1100 V Grade Multisterilizationanded Single Core Copper Conductor Cable In Heavy Duty 20 Mm Dia Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With One Number 1.50 Sqmm Fr Pvc Insulated Multisterilization And Copper Conductor Cable As Earth Contunity Wire Etc. Complete In All Respects. 104 Suppply And Wiring Of Submain 2 Number 4 Sqmm Fr Pvc Insulated 1100 V Grade Multisterilizationanded Single Core Copper Conductor Cable In Heavy Duty 20 Mm Dia Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With One Number 2.50 Sqmm Fr Pvc Insulated Multisterilization And Copper Conductor Cable As Earth Contunity Wire Etc. Complete In All Respects. 105 Suppply And Wiring Of Submain 2 Number 6 Sqmm Fr Pvc Insulated 1100 V Grade Multisterilizationanded Single Core Copper Conductor Cable In Heavy Duty 20 Mm Dia Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With One Number 4 Sqmm Fr Pvc Insulated Multisterilization And Copper Conductor Cable As Earth Contunity Wire Etc. Complete In All Respects. 106 Suppply And Wiring Of Submain With 4 Number 10 Sqmm Fr Pvc Insulated 1100 V Grade Multisterilizationanded Single Core Copper Conductor Cable In Heavy Duty 32 Mm Dia Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With Two Number 6 Sqmm Fr Pvc Insulated Multisterilization And Copper Conductor Cable As Earth Contunity Wire Etc. Complete In All Respects. 107 S / F Of Surface / Flush Mountingspn Distribution Board Without Mcbcompletein All Respects As Directed At Site.4 Ways 108 S&F And Making Connection Of 25A 2 Pole 30Ma Elcb / Rccb Of Din Rail Mounting Complete In All Respect As Per Direction And Satisfaction To The Engineer In Charge. 109 S&F And Making Connection Of 63A 2 Pole 30Ma Elcb / Rccb Of Din Rail Mounting Complete In All Respect As Per Direction And Satisfaction To The Engineer In Charge. 110 Supply, Installation, Testing And Commissioningof Main Distributionboard Suitable For Required Size Incomer And Single / Three Phase Outgoing McbS, Ip 42 Protection, Double Metal Door, Factory Fabricated, Wall Mounting Type In Surface / Recess, Powder Coated, 415 V / 250 Amp Copper Bus Bar, Earth And Neutral Bar, Removable Gland Plates, Cable Glands Including Connection With Outgoing Feeders Completeinall Respect. 111 S / F Of Surface / Flush Mountingspn Distribution Board Without Mcbcompletein All Respects As Directed At Site. 12 Ways 112 Supply & Fixingof 6 / 10 / 16 / 20 / 25 / 32 Amp. Sp Mcb ( 10 Ka ) 113 S / F Of Consumer Unit Flush / Wall Mounting Type Controlled By Incoming 32 Amp / 240 V Spn Switch Fuse With Outgoing Circuits Of 4 Way 16 Amp 240 V Rewireable Type Distribution Fuse Boardcompletewith Complete In All Respects. ( Cat.-B ) 114 Supply&Burryingof 600Mm X 600Mm X 6.0Mm G.I. Plate, Vertically For Earthing With Its Top At Least 3 M Below Ground Level Complete 20Mm Dia. G.I.Pipe And Funnelforwatering And One Earthing Lead Ofno. 8Swgg.I. Wirein 15 Mm Dia. Gi Pipe Uptoswitch Board ( From Apron To Switch Boardthecost Of Gi Pipe & Gi Wire Willbeextra ) 300Mm Square C.I. Box With Hinged Cover, Masonary Housing Alternate Layer Of Charcoal / Coke And Salt Atleast 150Mm Thick Alround Etc. As Per The Direction Of Engineer In-Charge Complete In All Respect . 115 Supplying & Laying Of One Number 8 To6 Swg G. I. Wirein 15 Mm. Dia. G. I.Pipefor Earthing, Laidin Groundor Inwall Duly Concealedincludingthecostofcement, Sand, Labour, T&Pandothermaterial Required For Proper Completion Ofthework As Directed At Site. 116 S / F Of Single Light Wall Bracket On Matching M.D.F.E.G. Board Base Etc. Completeinall Respects. Category A. 117 Supply And Fixing Of Recess / Surface / Pendent Mounting Round 10 To 15 Watt Led Down Lighter Having Powder Coated Die Cast Aluminium Housing With Heat Sink, Diffuser / Reflector And Driver Set Complete In All Respect Cat- Aaa 118 Supply And Fixing Of Led Tube Light With Batten Suitable For Up To 1 X 22 Watt Led Tube Light Complete Including Tube Etc On Surface Complete In All Respect.Cat-Aaa 119 Supply And Fixing Of Electronic Fan Regulator 120-280 V Isi Marked On The Existing Switch Board Including Making Connection, Required Material, Labour T&P Etc. For Proper Completion Of Work To The Satisfaction On Engineer-In-Charge Of Work. 120 S / F Of Hexagonal Fan Box With Hexagonal Side Of Approx. 80 Mm.In Lengthfabricatedfrom 16 Swg M.S. Sheet Incorporating With10 Mm. Dia. M.S. Round Bar Duly Bent For Supporting Fan Hanger Duly Painted With Redoxideand Screwingarrangementwithwiringconduit Laid In The R.C.C.Roofbeforeconcreting Along With Supply Of All Materials, Labour, T&P Etc. For Proper Completion Of Work. 121 S / F Of Doorchimeonpolishedm.D.F.E.G. Board Includingmakingconnectionsetc. Complete In All Respects. 122 Supply Of Ceilling Fans With Fan Motor Of A.C. Permanent Insulation, Capacitor Rating Conforming Bee 5 Starr Rating And Is:374 / 79 And Also Comply With Is: 1709 / 1984 With Latest Amendment. The Rated Voltage 220 / 240 Volts, 50Hz, 1-Ph Ac The Fan Assemble Should Consits Of Down Rod Blades, Shackle Canopies Etc. And With Double Ball Bearing System. ( I ) Bee 5 Star Rated -1200 Mm Sweep 123 Supply Of Ac230 / 250 Volts, 50 Hz Exhaust Fansincluding Providingnuts, Bolts, Mounting Frame And Other Accessories Etc. Complete. ( Make : Bajaj / Usha / Newtek / Havells ) 300 Mm Sweep

INR 3540 /-

INR 110000.0 /-

Refer document

Name of Work :- Construction of remaining work at P.H.C., Kapsad, Meerut.

Sl. No.	Item Description
1	Excavation in foundation in ordinary soil (loan clay ot sand) including lift upto 1 50 meters and lead upto 30 Mitr. Including filling watering and tranming of excavated earth in the trenches of the building between the building and the sides of foundati trenches or in the plinth and extraction of disposal; as directed by the Engineer incharge, the foundation trenches from 30m (including royality)
2	Fillingof carted earth incide the plinth including cartage from a distance not less than 8 kms also including levelling dressing watering & ramming complete & cost of earth & royality etc.
3	Sand filling in plinth including supply of necessary quantity of sand from a distance not excluding 8km from the site of work and including watering dressing etc. rate to include cost of all materials, labour and T&P etc.required for proper completion of the work.
4	Providing and layingin cement concrete 1:4:8 (1 cement :4 coarse sand :8stone ballast 40 mm nominal size) and curing complete,including cost ofform- work,in foundation and floors complete including cost of all materials, labour and T&P etc.required for proper completion of the work.
5	Cement concrete 1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
6	Providing and laying in position bitumen hot sealing compound for expansion joints etc. DSR- 16.46.1 Using grade "A" sealing compound.
7	Contruction of apron drain (150*150 mm size, For 1.00m. Length)
8	Providing and injecting chemical emulsion for constructional antitermite treatment and creating a chemical barrier under and alround the column pits. Wall trenches basement Excavation Top surface of plinth fillingJunction wall and floor along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc complete (plinth area of building at ground floor only, shall be measured as per 6313 (Part II 1981) Excluding GST. Aldrine emulsifiable concen-trate any other approved material such as Heptrachlor or Chlordance will be used. The rate of application of chemical emulsion shall be as follows: (1) Treatment for Masonry 8 foundation 5 liters per sqm. (2), Back fill in immediate contact with foundation 7.50 liters per sqm. (3)Treatment of top surface of Plinth fillings 5 ??liters / sqm. (4).Treatment ofSoil along External perimeter of Building 7.50 liters/ sqm. (5). Treatment of soil under Apron along with external perimeter 5 liters / sqm.
9	First class brick work in 1:4 cement and coarse sand (FM 1.50 to 2.20) mortar infoundation & plinth including supply of all materials, labour and T & P etc.
10	First class/ Class 150 brick work in1:6cement and coarsesand (FM 1.50 to 2.20) mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for propercompletion of the work.
11	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.
12	Same as in above item but for slabs (Using 1:1.5:3 Mix concrete)
13	Same as in above item but for the lighterbeams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)
14	Same as in above item but for Footing (Using 1:1.5:3 Mix concrete)
15	Same as in above item but for Column (Using 1:1.5:3 Mix concrete)
16	Cast Cement concrete door sills, chaukhats, boundary posts shelves and similar small work with cement, approvedcoarse sand and 2 cm gauge stone grit in proportions of 1:2:4 excluding its fixing and binding the same with 24 B.W. G.G.I., binding wire, moulds, all materials labour, Tools & Plants etc. required for proper completion of the work. The rateexcludes making of drip course which shall be paid extra.
17	First class/ Class 150 brick work in1:6cement and coarsesand (FM 1.50 to 2.20) mortar in super-structureincluding necessary cutting and moulding of brick work as required and also includinghoney combed brick work in thickness of wall more than 12cms.including supply ofall materials, labourand tools and plants etc. requiredforpropercompletion of the work.
18	First class/ Class 150 brick work in1:4cement and coarsesand(FM 1.50 to 2.20) mortar in super-structureincluding necessarycutting and mouldingofbrickworkas required andalsoincludinghoney combed brick work in wall thickness 12 cms & below..including supply ofall materials, labourand tools and plants etc. requiredforpropercompletion of the work.
19	Painting on D.P.C. with two coats of air blown bitumen VG-10 grade @ 1.70 kg/sqm approximate including cost of fuel if any.
20	Providing and laying "brick koba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and course sand mixed with water proofing compound preading cement slurry mixed with aereclic cement concrete water proofing compound filled gaps of coba & top of coba mortar finished smooth & top mashed false square 30 cm xcm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast and course sand masonary coba with top finshed plaster mixed with acetic water proofing compound @ 2% by weight & including S/O all material, labour, T&P etc complete for proper comletion of the work.
21	Supply and fixingof flushdoors commercialqualityconformingtoI.S.2202 Part I (1983) includingfixingof wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handle, springs and other Fitting with necessary screws complete. 35 mm thick
22	Mild steel or iron workofsmall sizes and sections suchand holding down bolts, holdfasttierods,gratings etc. ( when notincludedinan overall rates) wroughttorequiredfromincluding supply ofsteel anditswastage includingcostof bolts, nuts if required forandwelding, grinding and making holes as required completion of workfabricationofholesdoors, chaukhats nosing. (a) Fabrication of holdfast & Door Chaukhat.
23	(b) Same as in above item but for Fabrication of grill / stairscase railing/Gate.
24	(c) Same as in above item but for Fabrication of Z-section steel windows.Openable
25	Providing and fixing fly proof galvanized M.S. wire gaugeto windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading
26	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood
27	Supply and fixing of 24 guage Aluminium sheet on toilet door shutters bottom including fixing with Aluminium Greves, labour including labour T&P etc required for proper completion of the work
28	Mild Steel or iron in plain work such as RCC or R.B. work wrought to required shape as necessary including bending for proper competition of the work and including supply of all steel & wastage and over lapping and hooks.
29	Fixingofsteelorwoodenchaukhats in position. (a) Door chaukhats window chaukhats above 1.5 sqm. And upto 3.0 sqm.
30	(b) Same as in above item but for Window chaukhats up to 1.5 sqm
31	(c) Same as in above item but for Ventilator chaukhats
32	12mm thick plaster with 1 cement : 6 Course sand over brick work, minimum thickness not to be less than 3/8" (10mm) thick including supply of all materials, labour and Tools and Plants etc required for completion of the work.
33	12 mm cement plaster on rough side with 1 cement : 6 Course sandover brick work, minimum thickness not to be less than 3/8" (10mm) thick including supply of all materials, labour and Tools and Plants etc required for completion of the work.
34	12 mm bearing plaster 1 cement:6 coarsesand
35	Making grooves 10 to 12 mm wide x 8 mm deep in plaster of the wall or in celling vertically or horizontally as required.
36	Making drip course in sun shade FACIA as per direction of engineering charge including supply of all material labour etc. required for proper completion of the work.
37	Supply and fixing 6 mm (1/4")thick china white glazedtiles inflooringorin skirting or dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry jointing and polishing complete includingsupplyof allmaterials, labour and tool sand plantsetc.required forproper completion of the work. Excluding GST.
38	2.5 cm thick 1:2:4 plain Cement concretefloor with cement approved coarse sand and 2cm. Graded approved stone ballast laid in planels finished with 3mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm.(3") local sand and brick ballast 4 cm. gause in proportion of 1:4:8 and removing any giving then a uniform finish,including supply of all materials, labour, T&P etc. required for proper completion of the work. But without base concrete.
39	Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coats neat cement (40 mm thickfloor).
40	2 cm. (3/4) thick cement plaster in dedo or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in pannels, finished with 3 mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5 1 including supply of all materials labour and T & P etc. required proper completion of the work
41	Providing and Laying 25 mm kota stone flooring over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
42	Providing& laying of Vitrified tiles of 600 mm x 600 mm size (thickness 10 mm) with water absorption less than .08% and conforming to is: 15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS15477 including grouting of joints.
43	18 mm thick marble tiles in rises of step skirting dado wall and pillars laid on 10mm thick cement mortar 1:3(1 cement : 3 coarse sand) jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.
44	Painting or varnishing work in small areas or new wood work with one coat (upto one sqm of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour toolsandplants etc. required forpropercompletion of the work. Piant to be used ISI marked. (For two Coat)
45	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (apex ultima, weather coat all guard ) assian, berger.
46	Finishingwallswith water-proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces(two coat) overone andincludingonecoatwhite cementprimertogiveaneven shade after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials.
47	One priming coat and one coat oil distemper on new work incliding supply of all materials, labour and T&P required for proper completion of the work(For two Coat)
48	Finishing Wall with acrylic emulsion paint of approved brand and manufacture and of required shade and undecorated wall surface to give an even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of the work for two coat.
49	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : With 4.0 mm thick glass panes.
50	Providing and fixing glass strips in joints of terrazo/ cement concrete floors.
51	Providing Stainless steelsliding bolts16 mm dia with nuts and 250 mm long.
52	ProvidingStainless steel towerboltwith10 mmdia and screw.300 mm long
53	Providing and fixing stainless steel handle with screws etc. complete (a) 150 mm
54	Providing and fixing oxidised sliding door bolts ISI marked anodisedwith nuts and screws etc. complete : 300x16 mm
55	Providing and fixing oxidised tower bolts ISI marked anodisedwith necessary screws etc. complete :250x10 mm
56	Providing and fixing oxidised handles ISI marked anodisedwith necessary screws etc. complete : 100 mm
57	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer
58	Providing and laying 80mm thick factory madeinter locking C.C. paver Block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
59	Water Supply and Sanitary :- Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
60	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
61	Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fitting and brackets, cutting & making good the walls wherever required. Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap
62	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin)
63	Same as in above item but for 40 mm dia(for sink and urinal)
64	Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
65	Providing & fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. bracketsandstainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required. 610 x 460 bowl depth 200 mm
66	S/F of upvc SWR Pipe Type -B confirming to IS -13592 incluiding jointing the pipes with rubber ring lubricant and UPVC SWR Cuplar confirming to IS 14735 also inluiding excavation of treches cutting of walls and holes and repairing of walls , floors and refilling the trenches as before cut including cost of other fittings such as door band, T and YT including supply of all materials labour and t&p required for prper complition of the work. 110mm dia SWR Pipe
67	Same as Above Item but for 90mm dia SWR Pipe
68	Same as Above Item but for 160mm dia SWR Pipe
69	S/F of upvc SWR Nahani Trap size100/90mm confirming to IS -14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.
70	Laying cement concre 1:5:10 in haunching S.W. pipes including concrete for bedding necessary form work and during complete. 100 mm dia
71	Same as Above Item but for 150mm dia
72	S/F of upvc SWR Cowel confirming to IS -14735 110 mm
73	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
74	Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, inluding fixing the pipe with clamps at 1 m. spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal work exposed on wall. 25mm dia nominal bore
75	Same as in above item but for 32mm dia nominal bore
76	Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, inluding fixing the pipe with clamps at 1 m. spacing . This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. Concealed work including cutting chases and making good the wall etc. 20mm dia nominal bore
77	Same as in above item but for 25mm dia nominal bore
78	Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching , reifilling and testing of joints complete as per engineer in charge. External Work. 25mm dia nominal bore
79	Same as in above item but for 32mm dia nominal bore
80	Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 25 mm nominal bore
81	Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats). 15 mm nominal bore
82	Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions.
83	Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931.
84	Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms.
85	Providing & fixing 15 mm nominal bore C.P. brassstop cock (concealed)of standard designandof approvedmakeconforming to IS : 8931.
86	Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931.
87	Providing & fixing 100 mm dia C.P brass shower rose with 15mm inlet.
88	Suppling and hoisting of sintex or equivalent high density polythylene seamless of piece moulded tanks and placing the same in proper position including all materials, lbours and T & P etc. for proper completion of the work. Tank should be ISI marked, Sintex or equivalent and I/C all taxes. 500litrescapacity
89	Providing and fixing square mouthS. W. Gully trapgrade `A" complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 x 110 mm. size P type
90	Providing & fixing 450 mm long C. P. brass towel railcomplete with C.P. brass bracketsfixedtowoodencleats with C.P. brass screw.
91	Providing & fixing ISI marked (IS : 778) brass gatevalve (class 1, PN - 1 MPa) with wheel of approvedquality (screwed end). 15 mm nominal bore
92	Same as in above item but for 20 mm nominal bore
93	Providing & fixing of medium class PVC spout up to 300 mm. length including cutting and making good the walls and floors etc. as required. 50 mm dia
94	Providing and fixing of Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching , reifilling and testing of joints complete as per engineer in charge. External Work. 40mm dia nominal bore
95	Same as in above item but for 50mm dia nominal bore
96	Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end). 50 mm nominal bore
97	Construction of sewer connecting chamber having internal size 60 x 60 x 60 cm constructed in class 150 brick work in 1:6 cement and coarse sand mortar, 10 cm thick PCC 1:4:8 in base and internal side plasterred with 1:3 cement and coarse sand mortar including a floating coat of neat cement and 2.5 cm thick PCC 1:2:4 flooring of chamber and 5 cm thick top cover in RCC 1:1.5:3 including reinforcement steel (Analysis Rate)
98	Internal Electrification Wiring point for light with 1 Sq. mm FR PVC insulated multistrand single core copper conductor cable in heavy guage PVC conduit pipe partly concealed in the wall and partly laid in slab with 1.5 sq. mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside of pipe, piano type switch and ceiling rose/angle/batten holder on 3 mm thick phenolic paminated backalite sheet etc. switches shall be fixed on suitable size MS box shunked in wall with 3 mm thick phenolic paminated backalite sheet and brass screws and washers complete in all respect as directed by Engineering-In-Charges including matching colour wash.
99	Same as above item but for Fan and Fresh Air Fan.
100	Same as above itembutfor 5ampplug point with piano type switch & socket etc.
101	Same as above item but for call bellwith piano type switch or socket etc.
102	Supply and fixing of power plug with 15A/240V flush type switch and 5 pin 15A/250 V flush type universal socket in suitable MS box of 175 mm x 100 mm x 50 mm size with henolic laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer.
103	Suppply and wiring of submain 2 number 2.5 sqmm FR PVC insulated 1100 V grade multisterilizationanded single core copper conductor cable in heavy duty 20 mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 1.50 sqmm FR PVC insulated multisterilization and copper conductor cable as earth contunity wire etc. complete in all respects.
104	Suppply and wiring of submain 2 number 4 sqmm FR PVC insulated 1100 V grade multisterilizationanded single core copper conductor cable in heavy duty 20 mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.50 sqmm FR PVC insulated multisterilization and copper conductor cable as earth contunity wire etc. complete in all respects.
105	Suppply and wiring of submain 2 number 6 sqmm FR PVC insulated 1100 V grade multisterilizationanded single core copper conductor cable in heavy duty 20 mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FR PVC insulated multisterilization and copper conductor cable as earth contunity wire etc. complete in all respects.
106	Suppply and wiring of submain with 4 number 10 sqmm FR PVC insulated 1100 V grade multisterilizationanded single core copper conductor cable in heavy duty 32 mm dia PVC conduit partly concealed in wall and partly laid in slab along with two number 6 sqmm FR PVC insulated multisterilization and copper conductor cable as earth contunity wire etc. complete in all respects.
107	S/F of surface / flush mountingSPN Distribution board without MCBcompletein all respects as directed at site. 4 WAYS
108	S&F and making connection of 25A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
109	S&F and making connection of 63A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
110	Supply,installation, testing and commissioningof Main DistributionBoard suitable for required size incomer and single / three phase outgoing MCB"s, IP 42 protection, double metal door, factory fabricated, wall mounting type in surface / recess, powder coated, 415 V / 250 amp copper Bus Bar, earth and neutral bar, removable gland plates, cable glands including connection with outgoing feeders completeinall respect.
111	S/F of surface / flush mountingSPN Distribution board without MCBcompletein all respects as directed at site. 12 WAYS
112	Supply & fixingof 6/10/16/20/25/32 amp. SP MCB (10 KA)
113	S/F of consumer unit flush / wall mounting type controlled by incoming 32 amp / 240 V SPN switch fuse with outgoing circuits of 4 way 16 amp 240 V rewireable type distribution fuse boardcompletewith complete in all respects. (cat.-B)
114	Supply&burryingof 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnelforwatering and one earthing lead ofno. 8SWGG.I. wirein 15 mm dia. GI pipe uptoswitch board (from apron to switch boardthecost of GI pipe & GI wire willbeextra)300mm square C.I. box with hinged cover,masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect .
115	Supplying & Laying of one number 8 to6 SWG G. I. wirein 15 mm. dia. G. I.pipefor earthing, laidin groundor inwall duly concealedincludingthecostofcement, sand, labour, T&Pandothermaterial required for proper completion ofthework as directed at site.
116	S/F of single light wall bracket on matching M.D.F.E.G. board base etc. completeinall respects. Category A.
117	Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT- AAA
118	Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light complete including tube etc on surface complete in all respect.CAT-AAA
119	Supply and fixing of electronic fan regulator 120-280 V ISI marked on the existing switch board including making connection, required material, labour T&P etc. for proper completion of work to the satisfaction on Engineer-In-Charge of work.
120	S/F of hexagonal fan box with hexagonal side of approx. 80 mm.in lengthfabricatedfrom 16 SWG M.S. sheet incorporating with10 mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with redoxideand screwingarrangementwithwiringconduit laid in the R.C.C.roofbeforeconcreting along with supply of all materials,labour, T&P etc. for proper completion of work.
121	S/F of doorchimeonPolishedM.D.F.E.G. board includingmakingconnectionsetc. complete in all respects.
122	Supply of ceilling Fans with fan motor of A.C. permanent insulation, capacitor rating conforming BEE 5 starr rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consits of down rod blades, shackle canopies etc. and with double ball bearing system. (i) BEE 5 Star rated -1200 mm sweep
123	Supply of AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting frame and other accessories etc. complete. (Make : Bajaj / Usha / newtek / Havells) 300 mm sweep