|
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed. |
| 2 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified. |
| 3 | Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed. |
| 4 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each andall as specified and directed. |
| 5 | M&L for, Non-skid ceramic coloured tiles, joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified. |
| 6 | M&L for First quality, Non skid ceramic coloured,joint free tiles8 to 10 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified. |
| 7 | M&L for First quality, Non skid ceramic coloured, joint free tiles 8 to 10 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, on vertical surface set andoverincluding 10 mm thick rendering with cement mortar (1:3) including pointing in white cement with pigment to match the shade of tiles,complete all as specified. |
| 8 | M & L for first quality coloured glazed ceramic, joint free tiles fixed in pattern of different colour including border of size300x450x7 mmthick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. |
| 9 | M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement and using WPC, complete all as specified. (Note : WPC shall be measured and paid separately. |
| 10 | M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. |
| 11 | M&L for Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces including chicken wire mesh (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified. |
| 12 | S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified and directed |
| 13 | S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed |
| 14 | M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a both side prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both sideprelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling ofboth sidePVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing inclStile and rails feathered at edges complete all as specified and directed. |
| 15 | S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of5 mm thick prelam PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified. |
| 16 | S&F powder coated aluminium anodized door frame and fully glazed shutterdivided in to two glazed panels including aluminium anodized snap beadingand rubber gasket / lining for fixing of glass as directed. The frame shall be fixed with aluminium anodized bolt by drilling in the existing wall and with thrust bolt of suitable sizeall as directed. The frame and shutter will be made out of the following sections and fittings: (a) Aluminium anodized door frame 101.60mm x44.45mm x2.01mm fixed with aluminium board and thurst bolt in walls by drillingas directed Aluminium anodized top, bottom rails of shutter section no 19519 of jindal and Shutter Vertical Stiles Section No. 19560 of jindal (b) Aluminium anodized lock rail of shutter section no 19564 (c) Brass six lever dead lock suitable for aluminium doors manufactured by Harrison Locks or Godrej as approved – 01 No for each door(d) Aluminium anodized tower bolt 200mmlong size Make Classic or Argent – 02 No in each door(e) Aluminium anodized fancy handle 250mm long Make Classic or Argent – 02 No in each door(f) Glass pane shall be 5.5mm thick tinted glass of size as required(g) Floor spring hydraulic heavy duty and pivot arm Make Everite/ Sandhu – 01 No for each door |
| 17 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engineer - in – Charge . |
| 18 | S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm all as specified and directed by Engineer - in - Charge . |
| 19 | S & F mild steel, 300mm, ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer - in - Charge. |
| 20 | S & F aluminium handle cast type anodised, 125 mm long all as specified and directed |
| 21 | S & F for125 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | S & F SS butt hinges, medium weight100mm size all as specified and directed |
| 23 | Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B – 1 all as specified and directed by Engineer - in - Charge. |
| 24 | S&F mild steel work as in joist, channel, angle etc with or without connecting plate grade Fe-410-0 as in chowkhats including hold fasts etc complete all specified and directed. |
| 25 | M&L for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 26 | M&L for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 27 | M&L for factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 28 | Note foritem NoNo.25, 26 & 257:-(i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grillas per item NoNo.23, 24 & 25 of aboveto be inclusive in the rate quoted for unit. |
| 29 | M&L for Cement concrete 1:3:6 type C–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge. |
| 30 | Material and labour for preparation of new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat pink primercomplete all as directed. |
| 31 | M&L for preparation of newsurfaces of steel or iron work of any description not otherwise described over10cm width or girth and applying twocoat of synthetic enamel paint over a coat of primer on steel surfaces complete all as specified and as directedby Engr-in-Charge. |
| 32 | Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. |
| 33 | Material and labour, shortcrete to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. Upto the height of 2 th storey bldg . |
| 34 | Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 35 | Supply only welded steel wire fabric, weight not exc 4kg/sqm, complete all as specified and directed. |
| 36 | Dismantling/removingold damaged worn out APP of any thicknessincl screed bed or plastering of anythickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete. |
| 37 | Material and labour 15 mm thickcement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cementon concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 38 | Supply only Integral water proofing compound complete all as specified and directed. |
| 39 | M&L for Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified. |
| 40 | Material and labour for, water proofing treatment of roof consisting as under:- (a) Applyinga tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and directed. |
| 41 | All as per Srl item No. 40 here-in-before but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws andPVC rawal plugs as required complete all as specified and as directed. |
| 43 | Taking down steel tubing 15mm bore and connections including cleaning for refixing or removing to stores completeall as specified and directed by Engineer - in – Charge. |
| 44 | All as per Srl Item No 43here in before but 20mm bore all as specified and directed by Engineer - in - Charge. |
| 45 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately. |
| 46 | S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately. |
| 47 | M&L for Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed by Engineer-in - Charge. |
| 48 | S & F in repairs shower rose 125mm size round shape single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system rincl shower arm casted 190 mm long flat shape for wall mounted showers with flangeinclfixing to steel pipe or union all as specified and directed by Engineer - in - Charge. |
| 49 | S & F in repair wash basins vitreous China, white flat back size 550 x 400mm, oval type,colour, including CP waste grating 32mm size, PVC waste pipe 25mm bore heavy duty, chain and plug and porcelain stopper , bracketsfixedcomplete all as specified and directed. |
| 50 | Supply and fix in repairs Cast ironfloor trap with dia of outlet 100 mm, with CP gratinghinge type in kitchen and other situation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed. |
| 51 | Supply and fix in repairs Cast ironfloor trap with dia of outlet 75mm, with CP gratingwith hinge in kitchen and bath etcsituation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed. |
| 52 | Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out from trenches 100 / 75 mm bore (sand cast) all as specified and directed by Engineer - in - Charge . |
| 53 | Material and labour for , 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed. |
| 54 | Material and labour, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed. |
| 55 | Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed. |
| 56 | Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed. |
| 57 | S & F 100mm bore bends, diminishing pieces or tapers all as specified and directed by Engineer - in – Charge. |
| 58 | S & F 75mm bore bends, diminishing pieces or tapers all as specified and directed by Engineer - in – Charge. |
| 59 | S&F in repairs vitreous china squating pan, \"Orissa\" pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron \"P\" or \"S\" trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. |
| 60 | Demolition of stone slabs andtiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 61 | Material and labour for, 18-20 mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishinging damaged stone slab of any description complete all as specified |
| 62 | Material and labour for, machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 63 | M&L for granite tiles/slab of sizes as directed(of any type) 20 mm thick om cooking platform,shelves etcmachine cut,bedded over 20 mm thick in CM1:4and jointed with grey cement slurry and pointed with white cement with admitures of pigment to match with shade of granite stone incl grinding and polishing compelte all as specified. |
| 64 | Dismantling water tanks of capacity exceeding 250 and not exceeding 500 ltrs all as specified and directed by Engineer - in - Charge. |
| 65 | Dismantling water tanks of capacity exceeding 500 and not exceeding1000 ltrs all as specified and directed by Engineer - in - Charge. |
| 66 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge . |
| 67 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layerhoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge . |
| 68 | M&L in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed |
| 69 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. |
| 70 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. |
| 71 | M&L for Preparation of newly plastered surfaces of wall and applyingtwo coat of Cement Base Paintcomplete all as specified and directed by Engineer-in-Charge. including necessary scafolding upto Istfloor. |
| 72 | Material and labour for preparation of new plastered surfaces and apply two coat of oil bound distmperover a coat ofprimer, complete all as specified and directed. |
| 73 | M &L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified . |
| 74 | M &L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified . |
| 75 | M&L for complete removal of existing treatment by scraping down completly on brick wall/concrete/plasteredsurfaces thoroughly, washing, rubbing down with water cleaning the surface upto the entire satisfaction of Engineer-in-Charge and a primer coat of \" cemprover of M/S Snocem on entire surfaces and filling the craks/depression/holes etc by putty as directed and making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 thanapplying two coat of cement base paint coating of approved colour and shade by accepting officers on walls complete all as specified and directed by Engineer-in-Charge. |
| 76 | M&L for complete removal of existing treatmenton walls by scraping down washing rubbing down with water and cleaning the surface up to the entire satisfaction of Engineer-in-Charge and includingopening ofexisting cracks , filling up of \"V\" cracks with epoxy expandable putty to required depth, making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 applying two coat of distemper oil emulsion over 1 to 3 mm thick birla putty punning,complete all as specified or as directed by Engineer-in -Charge. |
| 77 | M&L for Complete scrapping of existing treatment on ceiling including cornices pilasterssteel scrappers , wire brushing,and efforescent salts and treating oil and greasy spots and making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 applying two coat of white wash on ceillingcomplete all as specified and directed by Engineer-in-Charge. |
| 78 | M&L for Complete scrapping of existing treatment on wall including cornices pilasterssteel scrappers , wire brushing,and efforescent salts and treating oil and greasy spots and making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 applying two coat of white wash on wall complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F pillar tap 15mm sizecast copper alloy chromium plated fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed by Engineer-in-Charge. |
| 80 | S & f in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 81 | S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 83 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge. |
| 84 | S & F in repairs stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type),screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified. |
| 85 | Demolition of cement concrete (unreinforced) of any description(below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified. |
| 86 | M&L for PCC (1:3:6) Type C-2 75 mm thick using 40 graded stone aggregate as in subbase of floor all as specified. |
| 87 | M&L machine pressed precast concrete interlocking paver block any shape and size confirmeing to IS-15658-2006 of 60 mm thcik, M-35 grade with grey cement and pigment over 50 mm thick sand cushioning, etc complete all as specified and directed. |
| 88 | M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as inrounded or chamfered on edges in any description complete all as directed by Engr in Charge. |
| 89 | Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge. |
| 90 | M&L for concealed point wiring for the following the PVC insulated and unsheathed cable 1.5 sq mm (nominal area) multistranded copper conductor 1100 v FRLS grade single core including PVC conduit medium grade of appropriate size (not less than 20 mm dia) ISI marked concealed in wall and surface on ceiling complete with all accessories and all as specified including 1.5 sq mm PVC insulated unsheather multistranded copper conductor to common earth and connected to earth dolly for following :- (Note) : 1.The cuttingchases shall be finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost.2. Rate quoted by the contractor deemed to be included metal flush box of suitable size as required at site and 3 mm thick laminated sheet suitable for mounting of switch and socket etc . |
| 91 | One light point control by one switch |
| 92 | One ceiling fan/exhaust fan control by one switch |
| 93 | One 3 pin socket outlet, 5 Amps independent |
| 94 | One 3 pin 5 amps socket outlet on the same board with other switches |
| 95 | One 3 pin 5 Amps socket outlet independent but below the switch board of light board of light points in the same vertical plane. |
| 96 | All as per item No. 90.00 hereinbefore but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor. (FOR 15 Amps socket point) |
| 97 | All as per item No. 90.00 hereinbefore but wire 4.0sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor. (FOR geyser/AC point) |
| 98 | S & F switch piano flush type one way 5 Amps complete all as specified and as directed. |
| 99 | Supply and fix ceiling rose three terminal complete all as specified and as directed. |
| 100 | S & F socket outlet 2 in 1, 3 pin, 5 Amps complete all as specified and as directed. |
| 101 | S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified and as directed. |
| 102 | S&F switch piano, flush ype single pole 15 Amps complete all as specified and as directed. |
| 103 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 104 | Supply and fixing in repair lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 105 | Supply in repair 12 watts, 6500 K,emergency bulb with high quality BIS approved Li-ion battery with 2600AH capacity, the bulb shall work as regular lamp with AC supply and emergency lamp with DC supply, the power backup in emergency mode is upto 4 hours and charging time shall be 8 hours, the deiver designed with wide voltage range of 150-300V AC complete all as specified and as directed.Cat No. NE1201 of Make : Wipro or its equivalent in Philips/ Havells |
| 106 | Supply and fixing LED tube light fitting mirror type with high output diffuser 2 feet, 10 watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 107 | Supply and fixing stepped type electronic fan regulator flush type complete all as specified and as directed. |
| 108 | Supply and fix in replacement ceiling fan 1200 mm sweep complete with down rod canopy and blades of size 1200 mm sweep,Energy efficient,5 star rated.Make Havells/Crompton /Bajaj.(Old fan shall be deposited to MES Yard) |
| 109 | M& L for making hole to the existing wall surface of any type/girth and at any height for fixing of exhaust fan 380 mm sweep and make good to match with the existing surfaces complete all as specified and directed by Engr-in-charge.Make : Havells/Bajaj/Crompton |
| 110 | Supply and fix heavy duty single phase, steel body exhaust fan 380 mm sweep, 900 RPM complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved by Engr-in-charge complete all as specified and directed.Make : Havells/Bajaj/Crompton |
| 111 | Supply and fix heavy duty single phase, steel body exhaust fan 300 mm sweep, 900 RPM complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved by Engr-in-charge complete all as specified and directed. Make : Havells/Bajaj/Crompton |
| 112 | Supply and fixin repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed. |
| 113 | Supply and fixing in repair TPN DB\"s 4 way vertical type 415 V, double door suitable for housing of 125 Amps MCCB as main incoming complete all as specified and as directed. |
| 114 | Supply and fixing MCCB 125 Amps, 4 Pole, 16 KA, suitable to be fixed in 4way TPN DB complete all as specified and directed. |
| 115 | S & F in repair MCB DB double doorSPN 12 Way with 200 Amps rated copper bus bar complete all as specified and as directed. |
| 116 | S & F in repair MCB DB double doorSPN 8 Way with 200 Amps rated copper bus bar complete all as specified and as directed. |
| 117 | S & F in repair MCB DB double doorSPN 4 Way with 200 Amps rated copper bus bar complete all as specified and as directed. |
| 118 | S & F MCB SP 6-32 Amps complete all as specified and as directed. |
| 119 | S & F MCB SP 63 Amps complete all as specified and as directed. |
| 120 | S & F MCB SPN 63 Amps complete all as specified and as directed. |
| 121 | S & F MCB SP 40 Amps complete all as specified and as directed. |
| 122 | S & F MCB SPN 40 Amps complete all as specified and as directed. |
| 123 | S&F RCBOs for earth leakage, overload & short circuit protection double pole, 40 Amps, 100 mA complete all as specified and directed. |
| 124 | S&F RCBOs for earth leakage, overload & short circuit protection double pole, 63 Amps, 100 mA complete all as specified and directed. |
| 125 | M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm diaby means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I. (for TPN DB\"s) |
| 126 | S&F Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc.As required 4 mm dia galvanised iron or steel wire complete all as specified and as directed. |
| 127 | S & F sub main wiring for circuit of size 10 sq mm 2 core (FRLS) alongwith earth wire of 6 sq mm single core of FRLS PVC insulated unsheathed cable,1100 volts grade with multistranded copper conductor including PVC conduit of suitable size complete all as specified and directed by Engr-in-Charge. (FOR SPN DB\"s) |
| 128 | S & F in repair sub main wiring for circuit of size 6 sq mm 2 core (FRLS) alongwith earth wire of 4 sq mm single core of FRLS PVC insulated unsheathed cable,1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed by Engr-in-Charge. (FOR SPN DB\"s ) |
| 129 | All as per item No. 123 hereinbefore but of wire 1.5 sq mm two runs and 1.5 sq mm single run as earth wire.(for Bldg street light) complete all as specified and directed by Engr-in-Charge. |
| 130 | Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core for TPN DB\"s. complete all as specified and directed by Engr-in-Charge. |
| 131 | Excavation in trenches in hard/dense soil not exc. 1.5 metre wide and n\"exc. 1.50m deep for laying cables/pipes/poles and getting outcomplete all as specified and directed. |
| 132 | Returning filling including spreading leveling watering and well ramming in layers not exc 25Cmin soft/ loose soil, complete all as specified and directed. |
| 133 | Removing excavated material in soft/ loose soil n\"exc 50M and depositing where directed at a level n\"exc1.5M above the starting point, complete all as specified and directed. |
| 134 | M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) and punned to 18cm in trenches including watering and consolidation, complete all as specified and directed. |
| 135 | Supply and lay well burnt brick class B as protection to cable in cable trenches all as specified and directed |
| 136 | Supply and fix MS seamless steel tube 15 mm dia down rod for hanging the fan including cutting the false ceiling and making good the false ceiling after fixing of fan down rod complete all as specified and directed. |
| 137 | Supply and fixing LED bldg security light fitting 25 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size of GI bracket for mouting of security light to be bend as required shape, pipe bracket shall not be less than 1.2 Mtr length and suitable size 02 Nos MS clamps and nuts and bolts complete all as specified and directed by Engr-in-Charge. |
| 138 | Supply and fixing LED luminaire 600 mm x 600 mm 35/36 watts, 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases for suitable size complete all as specified and directed by Engr-in-Charge. |
| 139 | Supply and fix wall mounted LED bed side light warm white (white metal) aluminium cast, 3 Watts.Cat No. 48042,complete all as specified and directed by Engr-in-Charge. |
| 140 | M & L for GI tubing (light grade) with all necessary fitting laid in trenches/under road crossing, or fixed onpoles/walls/under floor etc complete all as specified and as directed for the following sizes:- |
| 141 | a) 40 mm dia bore |
| 142 | b) 50 mm dia bore |
