}

Providing Audio System Provisions Of Stage Light In The Conference Hall At Distt. Court Complex Chakkar, shimla-Himachal Pradesh

Public Works Department-PWD has published Providing Audio System Provisions Of Stage Light In The Conference Hall At Distt. Court Complex Chakkar. Submission Date for this Tender is 08-06-2022. Audio Video Equipment Tenders in shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32482332
Providing Audio System Provisions Of Stage Light In The Conference Hall At Distt. Court Complex Chakkar
Open Tender
Indian
Himachal Pradesh
shimla
08-06-2022

Tender Details

Providing Audio System Provisions Of Stage Light In The Conference Hall At Distt. Court Complex Chakkar

Key Value

Document Fees
INR 500 /-
EMD
INR 18500.0 /-
Tender Value
INR 9.22 Lakhs /-

BOQ Items

Name of Work: Providing Audio System and provision of stage Lightsin the Conference Hall at Distt. Court Complex, Chakkar, Shimla-5.
Sl. No. Item Description
1Providing Dual 15"" Two way Sound Reinforecement Loundspeker System Power Rating 500 W / 2000 W, frequency Range (-10db) 42Hz - 18 KHz, Frequency Response ( +- db) 62 Hz - 13KHz, Maximum SPL 133 Db, Nominal Dispersion 90degree x 50degreeof JBL, Yamaha,Bosch,philips or its equivalant make as approved by the Engineer-in-charge.
2Providing dual high power sub system, Dual 18" Bass Reflex Subwoofer, Power Rating 2000 W /4000 W / 8000 W of JBL, Yamaha, Bosch, Philips or its equivalentmake as approved by Engineer In Charge .
3Providing Ewo-channel,1200W @ 4 ohm Power Amplifire of Crown, Yamaha,Bosch, Philips or its equivalentmake as approved by Engineer In Charge .
4Providing Ewo-channel, 8000W @ 4 ohm Power Amplifire of Crown, Yamaha,Bosch, Philips or its equivalentmake as approved by Engineer In Charge .
5Providing Multipurpose Mixers: Frame Sizes 6+2,2 configurable auxiliary buses, XLR type and 1/4" metal jack connector sockets, RCA phono stereo playback inputs and record outputs of Soundcraff , Bosch Philips or its equivalentmake as approved by Engineer In Charge .
6Providing Cable Connectors for above setup as approved by the Engineer In Charge .
7Providing 17 U Rack Equipment Rack for housing all rack mountable equipment with internal wiring, Front glass door; heat dessipation fans; movement wheels, power distribution units etc. of com rack or its equivalent make as approved by the Engineer in Charge.
8Installation Charges on item No. 1 to 7 (on the total valve of the equipments)
9Providing Small Moving Head LED-6 Jia or its equivalent make as approved by the Engineer in Charge.
10Providing RCB Laser (1W) jia or its equivalent make as approved by the Engineer in Charge.
11Providing LED PARjia or its equivalent make as approved by the Engineer in Charge.
12Providing Strobe Lightjia or its equivalent make as approved by the Engineer in Charge.
13Installation Charges on item No. 8 to 11
14Providing Wired Microphone with Audio frequency bandwidth 70-20000 Hz, Sensitivity 2.6 mv/Pa, Electrical impedance 600 Ohms, Recommended load impedance 2000 Ohms, polar pattern Supercardioid, Type Balanced XLR Gender male, Contacts 3-pin.
15Providing Wireless Microphone1x SR45 Reciever, 1X HT45 Handheld transmitter, 1x Stand adapter, 1x Universal power supply with US/UK/EU adapter, 1x AA size battery ,530,025-559,000 MHZ
16Wiring for circuit/ submain wiring alongwith earth wire with the followingsizesofFRLSPVCinsulatedcopperconductor,single corecableinsurface/recessedmediumclassPVCconduitas required.
172 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
182 X 4 sq. mm + 1 X 4 sq. mm earth wire
192 X 6 sq. mm + 1 X 6 sq. mm earth wire
20Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of 200mm X150 mm X 75 mm deep( nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing3 No. 5 pin 5/6 amp socket outlet and 5/6 amppiano type switch, connection, painting etc.as req. (For light plugs)
21Supplying and drawing Speaker wire in theexisting surface / recessed, steel / PVC conduit as required.approved make.
22Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
23Group C
24Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
2520 mm. dia
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail