Department Of Local Bodies has published Dismantling, Repair And Various Advanced Sulabh Devlopment Work At Chandraghata Sulabh In Ward No. 33 . Submission Date for this Tender is 06-06-2022. Dismantling Work Tenders in kota Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | work name |
| 2 | Demolishing cement concrete including disposal of material within 50 meters lead : 1 : 3 : 6 or richer mix. |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 4 | Demolishing cement concrete including disposal of material within 50 meters lead : 1 : 3 : 6 or richer mix. |
| 5 | Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead : |
| 6 | Silt clearance of drains, channels and canals with lift 1.5 Mtr and lead up to 50 Mtr |
| 7 | Providing and fixing in position collapsible steel shutters with vertical MS channels20 x10 x2 mm and brackets with flat iron diagonals 20 x 5 mm size with top and bottom rail T – iron 40x40x6 mm with 40 mm dia. Steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension) with 75 mm opening when closed. |
| 8 | Cement concrete flooring grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete 50 mm thick with 20 mm thick nominal size aggregate. |
| 9 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat or red oxide. |
| 11 | Providing & laying Chequerred terrazo tiles of approved make 22 mm thick with marble chips of size upto 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification on 28 m thick bed of CM 1:4 dark shade uding ordinary cement 50 mm thick |
| 12 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 13 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed with a lead of 50 mtr. All kinds of soil |
| 14 | providing and laying in position including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering – All work up to plinth level. cement concrete ( 1 : 4 : 8) |
| 15 | Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1% solution of water-proof compound) including two coats of hot blown bitumen (2 kg per sqm) complete as per specification with glass strip 3mm thick at a distance of 1m interval. 75mm thick |
| 16 | Brick masonry in foundation and plinth with bricks of class designation 75 in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | Brick masonry in foundation and plinth with bricks of class designation 75 in : Cement mortar 1:6 (1 cement : 6 coarse sand) Add extra for brick work in super structure upto third story. |
| 18 | Half brick masonry in foundation & plinth using bricks of designation 75 in : Cement mortar 1:4 (1 cement : 4 coarse sand) Add extra for half brick masonry in super structure upto third story. |
| 19 | Centering shuttering with plywood or steel sheets including strutting, propping, bracing bothways with wooden members and removal of formwork for superstructure upto 4.5mtr. above plinth, for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, copings, bed plates, anchor blocks, sills, chhajjas, lintel, beam etc. |
| 20 | Providing cement concrete work in beams, suspended floors, roofs, girders having slopes upto 15º, landings, balconies, shelves, chajjas, lintels, banks, plain windows sills, staircases and spiral staircases upto floor three level including curing, compaction, finishing with rendering cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good and joints excluding the cost of centering shuttering and reinforcement :with 1:1.5:3 [1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal mix] |
| 21 | Providing and fabricating steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor three level. Hot rolled deformed bars [IS:1139] |
| 22 | Providing batta (gola) 75mm×75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 23 | Finishing with neat cement (punning). |
| 24 | Providing and fixing 1st quality standard White/Ivory Glazed Tiles ISI marked (IS:13753) of size 300mm×200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster) Category-I Kajaria, Johnson, Orient, Somani make etc. |
| 25 | Supplying and fixing fixed wire gauge of 14 mesh × 24 gauge to the metal frame of rolled section by metal beading 20×3mm with suitable screw at not exceeding 150mm distance. |
| 26 | Providing and fixing square bars or other flat welded to window, ventilators etc. |
| 27 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : South (Red/Chocolate colour) |
| 28 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 29 | Plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish : 12 mm thick Add exta for ceiling work |
| 30 | Plaster on new surface of walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick |
| 31 | Providing & fixing Aluminium composit panel 5mm thick by using 0.5 mm thick aluminium foil and 5mm thick reflective glass (Sand bobin, ASHI India or equivalent), and framing of 2mm thick aluminium section of 50x50 mm size silicon & glazing tap etc. complete, upto IIIrd floor, Pattern as approved by Engineer in Charge. |
| 32 | Providing and laying finishing with cement putty birla, j.k. cement including all scaffolding |
| 33 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : New work (two or more coats) over and including scraping and priming coat with distemper primer |
| 34 | Painting with Acrylic Exterier Paint Birla/Nerolac/Asian/Berger of Equivelant of approved brand to give and even shade with all scaffolding two or more coat on new work after cleaning of existing surface complete in all respect. As per direction of Engineer in charge. |
| 35 | Random rubble dry stone Kharanja under floor. |
| 36 | Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35mm thick cement concrete flooring 1:2:4 mix complete with good finish with:Stone slab 60 to 75mm thick average |
| 37 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 38 | P&F Indian type white glazed vitreous China 1st quality W.C. Orissa pan (IS : 2556 mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor :size 580×440mm |
| 39 | Providing and fixing European type white glazed vitreous china 1st quality W.C. (IS:2556 mark) including cutting and makinggood the wall and floor. Wall Mounting Providing and fixing of water closet seat covers with brass hinges complete :Solid PVC (ISI marked) grade-I White for EWC. |
| 40 | P&F WVC Wash Basin (1st quality IS:2556 mark) of approved make with CI brackets duly painted, 1 no. 15mm CP Pillar cock (IS:8934 mark) & 32 mm CP brass waste coupling of approved make, 25mm GI waste pipe complete including cutting & making good the wall.Size 450mm × 300mm |
| 41 | Providing and fixing Bottle Trap of approved make CP brass 32mm |
| 42 | P&F Beveled edge mirror of special glass of approved make (Atul/equivalent) complete with 6mm thick asbestors cement sheet ground fixed to wooden screws & washers. Other size |
| 43 | P&F Grating of approved quality/make :CP brass with frame heavy & superior quality size 125mm dia |
| 44 | Construction of open surface drain with 112mm thick brick masonry in CM 1:4, 110mm thick base concrete 1:5:10, 37mm thick M-15 grade CC flooring, 12mm 1:4 cement plaster on top surface excavation & disposal of earth complete as per approved design/ drawing. 250mm drain, 300mm av. Depth |
| 45 | P&F low level flushing cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings, C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall :PVC with PVC bend as per IS:7231 |
| 46 | P&F Bib cock (IS:8931 mark), superior quality of approved make : C.P. elbow-action 15mm nominal bore |
| 47 | Carriage of Earth Material upto 7 km lead. |
| 48 | Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35 x 35 x 5 mm suitabilly diagonally braced with 25 x 3 mm flat iron above and below lock rail of size 50 x 5 mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats : including two coats of anti corrasite red oxide primer paint. |
| 49 | Polished Blue Kota stone flooring skirting laid over 20mm thick base of CM 1 : 4 andjointedwithgrey cement slurry to match the shade of the slab including rubbing and polishing complete. For area of each slab upto 901 to 2000 sq.Cm. 30 mm thick slab. 30 mm thick slab |
| 50 | Providing & Fixing rigid PVC pipe (IS : 4985 mark) Class II ( 4 Kg./Cm Sqm) approved quality/ make including jointing the pipe with solvent cement rubber ring and lubricant 110 mm Dia |
| 51 | 160 mm Dia |
| 52 | Providing and fixing rigid PVC Pipe fittings (IS : 4985 mark) of approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant. 110 mm DiaPlain Tee |
| 53 | Socket Plug |
| 54 | Bend 87.5° |
| 55 | Providing and Fixing polypropylene random copolymer pipe made from PPR type 3 Raw material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including clamp, cutting and making good the walls & floors. (Internal Works)20 mm OD |
| 56 | Providing and fixing Polyethylene Aluminium Polyethylene (PE-AL-PE) composite pressure pipes U.V. stabilised with carbon black confirming to ASTMF- 1282 - 1995 for water supply including trenching & refilling etc. (External work) |
| 57 | 2025 (25 mm OD) pipe |
| 58 | Providing and fixing Polypropylene random copolymer Pipe made from PPR Type 3 Raw Material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including complete etc. ball valve 20 mm |
| 59 | Providing and fixing Polypropylene random copolymer Pipe made from PPR Type 3 Raw Material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including complete etc. Screw Tap with Hand wheel20 mm |
| 60 | Providing and fixing PVC storage tank confirming to (S : ( 12701 marked indicating the BIS license No. of approved make with cover, 25 mm dia. 1 M long G. I. over – flow pipe & 25 cm. Long wash out pipe with plug & socket, including making connection etc. complete of approved design500 liter capacity. |
| 61 | PART – BWiring of light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sqmm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it’s accessories, round tiles, 18 SWG M.S. box with earthing terminal, 6A switch, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections, testing etc. as required. Group-I(a) Short point (upto 3 mtr.) |
| 62 | (b) Medium point (upto 6 mtr.) |
| 63 | (c) Long point (upto 10 mtr.) |
| 64 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4×1.5 sqmm Group-IMOTOR |
| 65 | Wiring of 3 pin 5 amp light plug point with 1.5 sq mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sqmm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it’s accessories, 18 SWG MS box with earthing terminal, 6A switch, 6A socket, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections, testing etc. as required. Long point (upto 10 mtr.) Group-I |
| 66 | P&F recessed/Surface mounting heavy duty horizontal type sheet steel distribution board phophatised/powder painted complete with copperbus bar, shorting link, neautral link, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required. Single door (Single phase) 4 way |
| 67 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board/sheet including making connections with lugs, testing etc. as required. Double pole isolator 30A / 40A rating Group-I |
| 68 | Wiring of light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sqmm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it’s accessories, round tiles, 18 SWG M.S. box with earthing terminal, 6A switch, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections, testing etc. as required. Group-I Medium point (upto 6 mtr.) |
| 69 | Wiring of 3 pin 5 amp light plug point with 1.5 sq mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sqmm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit & it’s accessories, 18 SWG MS box with earthing terminal, 6A switch, 6A socket, 3.0mm thick phenoliclaminated sheet, zinc plated/brass screws, cup washers, making connections, testing etc. as required. Group-II On Board |
| 70 | P&F strip type fluorscent tube fitting fabricated from (CRCA) sheet and finished with powder coating/stove enameled paint/ (extruded non corrosive UV resist EP channel) complete with accessories like (OCCB, starter, starter seat) / EB, rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc. as required. (without tube) 1×36 watts with OCCB Group-I |
| 71 | P&F fluorscent tube rod in existing fixtures as required. Fluorscent powder coated 36/40 watts Group-I |
| 72 | P&F of heavy duty capacitor start 900/1400 RPM single phase ISI marked exhaust fan, IS:2312 marked in existing opening including making connections testing etc. as required. 380mm sweep (900/1400 RPM) |
| 73 | P&F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only) 1200mm sweep |
| 74 | P&F 1.6mm thick MS recessed fan box, hexagonal/round of size 100mm dia, depth 75mm, 12mm dia rod fan hook with 100mm length extended on each side |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
