Military Engineer Services-MES has published Repair To Flooring, Sunken, Plumbing, Joineries, Aluminium Doors, Sanitary Fittings At Leaving In Billets, Airmen Mess And Bashara Area Under Ge ( Af ) Hasimara. Submission Date for this Tender is 02-07-2022. Railway Ancillaries Tenders in hasimara West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jun-2022 | CORRIGENDUM TO CRITICAL DATES | Date | 21-06-2022 |
| 2 | 21-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-06-2022 |
| 3 | 25-Jun-2022 | CORRIGENDUM TO CRITICAL DATES | Date | 02-07-2022 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick work/stone work incl raking out joints, hacking for key, scrubbing down with water etc, and removing rubbish all the premiser, complete all as directed. |
| 2 | M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surface finishing even and smooth without using extra cement,complete all as directed. |
| 3 | M&L for rendering 5mm thick in CM 1:3 on fair face of concrete surface on ceiling, complete all as directed. |
| 4 | Supply only liquid water proofing compound approved quality, all as directed. (Make : CICO No 1/SIKA/ACCO PROOF/Dr. Fixit) |
| 5 | M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of priming paint, complete all as specified and directed. |
| 6 | Dismantling floor,hearth or wall tiling including cememt mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed. |
| 7 | M&L for providing 15mm thick screed bed in CM (1:6) for laying floor finishes, complete all as directed. |
| 8 | M&L for rendering in cement mortar (1:4) backing coat, 10mm thick on fair faces of brick work or concrete surfaces, complete all as directed . |
| 9 | M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match, complete all as directed . |
| 10 | M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as directed. |
| 11 | M&L for scratch free, light shade, vitrified designed , coloured tiles, 10mm thick (square/rectangular) polished, area of each tile n.exc 0.36 Sqm, in floors etcand set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, complete all as specified and directed. |
| 12 | M&L for scratch free, light shade, vitrified designed , coloured tiles, 10mm thick (square/rectangular) polished, in vertical surface skirting/dado area of each tile n.exc 0.36 Sqm, incl 10mm thick screed bed in cement mortar (1:6) and set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided and removing from site, complete all as directed. |
| 14 | S&F steel window or ventilator, fixed type, with glazing barla, complete all as directed. |
| 15 | S&F steel window with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as directed. |
| 16 | S & F Mild steel work in framed work such as grills, gratings, etc… with ends of bars shouldered and /or riveted, or forged onto spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, and similar work conforming to Fe 410 - O or Fe 310 - O, complete all as directed. |
| 17 | Supply and fixingchromium plated steel handle left/right for fixing in steel window, complete all as directed. |
| 18 | M&L for sheet glass ordinary quality 4mm thick frosted glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as directed. |
| 19 | M&L for sheet glass 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as directed. |
| 20 | S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as directed. |
| 21 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as directed. |
| 22 | M&L for preparation of new steel surfaces of any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, all as specified and directed. |
| 23 | Taking down chowkats or frame, n.exc 1.50 Sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed. |
| 24 | Taking down chowkats or frame, exc 1.50 Sqm but n exc 4 Sqm each with shutters (without taking off shutter from the frame), complete all as specified and directed. |
| 25 | Taking down chowkats or frame, exc 1.50 Sqm but n exc 4 Sqm each with shutters,complete all as specified and directed. |
| 26 | Taking down Shutters of any description n exc 1 sq. m each, complete all as directed . |
| 27 | Taking down Shutters of any description exc 1 Sqm and n exc 2 Sqm each, complete all as directed. |
| 28 | Taking down Shutters of any descriptionexc 2 Sqm each, complete all as directed. |
| 29 | Taking down & refixing in the same opening shutters of any description not exceeding 1 Sqm each, complete all as directed. |
| 30 | Taking down & refixing in the same opening shutters of any descriptionexceeding 1 Sqm each & n.exc 2 Sqm each, complete all as directed. |
| 31 | Taking down & refixing in the same opening shutters of any descriptionexc 2 Sqm each, complete all as directed. |
| 32 | S&F clamps, hold fast, hook. washer & similar small articles conforming to Fe-290 Gde-E-165, complete all as directed. |
| 33 | M & L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as for holdfast / coving, complete all as directed. |
| 34 | S&F pressed steel frames for doors size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as directed. |
| 35 | S&F pressed steel frames for doors size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as directed. |
| 36 | M & L for precast reinforced cement concrete type B0, (1:2:4) (using 12.5 mm graded crushed stone aggregate) in door and windows frame, any size, single or double rebated all as speciifed, complete all as directed. |
| 37 | S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as directed all as directed. |
| 38 | M&L 30mm thick 2nd class hardwood glazed and skeleton door shutter open rebated and prepared to receive glass, gauze etc. edges of frames plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, complete all as directed. |
| 39 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as directed. |
| 40 | M&L 35mm thick 2nd class hardwood factory made plain framed paneled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as directed. |
| 41 | S&F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as directed. |
| 42 | S & F Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as directed. |
| 43 | Solid PVC door frame of size 50mm x 47mm made out of 5mm but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet M.S. square tube, supplying & fixing in opening as per specification & drawing, complete all as directed. |
| 44 | S&F factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame, complete all as directed. |
| 45 | S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as directed. |
| 46 | S&F MS butt hinges medium weight, cold rolled 100mm size, complete all as directed. |
| 47 | S&F in repairs MS butt hinges medium weight, cold rolled 75mm size, complete all as directed. |
| 48 | S&F Aluminium alloy,anodised,sliding door bolt 250mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as directed. |
| 49 | S&F in repairs Aluminium alloy,anodised,sliding door bolt 250 mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as directed. |
| 50 | S&F 150mm long aluminium anodised tower bolt of extruded section, complete all as directed. |
| 51 | S&F in repairs 150mm long aluminium anodised tower bolt of extruded section, complete all as directed. |
| 52 | S&F 150mm long extruded aluminium alloy handles, fabricated type anodised, complete all as directed. |
| 53 | S&F in repairs 150mm long extruded aluminium alloy handles, fabricated type anodised, complete all as directed. |
| 54 | S&F 125mm long extruded aluminium alloy handles, fabricated type anodised, complete all as directed. |
| 55 | S&F in repairs 125mm long extruded aluminium alloy handles, fabricated type anodised, complete all as directed. |
| 56 | S & F in repair door closer hydraulically regulated universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 81 kgs of extruded aluminum section designation No-3, complete all as directed. |
| 57 | S & F door closer hydraulically regulated universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 81 kgs of extruded aluminum section designation No-3, complete all as directed. |
| 58 | M&L preparation of new or previously untreated wooden surfaces any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as directed. |
| 59 | Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling over old glazing pins/spring clips and removing rubbish oall the premiser, complete all as directed. |
| 60 | S & Fmild steel 300mm long, ordinary rat rail rod pattern springs including roller and roller plate, complete all as directed. |
| 61 | Supply and fixed in repairmild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate, complete all as directed. |
| 62 | S&F 75mm Hasp & Staple, safety type, brass with mild steel hinge pin including bolt to himge plate and fixed with screws specified,, complete all as directed. |
| 63 | S&F in repairs 75mm Hasp & Staple of aluminium anodized incl bolt to hinge plate and fixed with screws, complete all as directed all as directed. |
| 64 | Taking up or down GI tubing of 15mm bore and connections, including cleaning for refixing or removal from site, complete all as directed. |
| 65 | Taking up or down GI tubing of 20mm bore and connections, including cleaning for refixing or removal from site, complete all as directed. |
| 66 | Taking up or down GI tubing of 25mm bore and connections, including cleaning for refixing or removal from site, complete all as directed. |
| 67 | Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as directed. |
| 68 | Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as directed. |
| 69 | Refixing 25mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as directed. |
| 70 | M&L for cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls , complete all as directed. |
| 71 | S&F GI water tubes of 15mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as directed. |
| 72 | S&F GI water tubes of 20mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floor, complete all as directed. |
| 73 | S&F GI water tubes of 25mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as directed. |
| 74 | S&F in repair gun-metal. Globe or gate valves 15mm bore dia with iron wheel head, screwed both ends for iron pipes, complete all as directed. |
| 75 | S&F in repair gun-metal. Globe or gate valves 20mm bore dia with iron wheel head, screwed both ends for iron pipes, complete all as directed all as directed. |
| 76 | S&F in repair gun-metal. Globe or gate valves 25 mm bore dia with iron wheel head screwed both ends for iron pipes, complete all as directed. |
| 77 | S & F500 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable water tank of any descriptions,complete all as specified in SSR Part I. |
| 78 | S & F1000 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable water tank of any descriptions,complete all as specified in SSR Part I. |
| 79 | S & F 20 mm bore,Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed. (Minimum weight - 210 gms), complete all as directed. |
| 80 | S & F 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromiun plated brass screws and cup washers, complete all as directed. |
| 81 | S & F in repairs,Vitreous China wash basin, oval shape, flat back of size 580 x 450 mm excluding taps but including chain, plug & porcelain stopper, bracket, complete all as specified and directed. |
| 82 | S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) , complete all as directed. |
| 83 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white,with inlet, ball valve, flush pipe, float and handle including brackets, complete all as directed. |
| 84 | S & F in repairs, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, complete all as directed. |
| 85 | S & F in repair 32 mm diawaste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end beddedinred leadcement and other end fixed, complete all as specified and directed. |
| 86 | S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 87 | S & F in repairs, stainless steel sinks made of1 mm thick sheetwith plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 88 | S & F in repairs, 15mm bore,Bib tap of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms, complete all as directed. |
| 89 | S&Ffancy type 15mm bore chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed dpwn, screwed for iron pipe or for brass ferrule, complete all as directed. |
| 90 | S&F in repairs fancy type 15mm bore chromium plated stop valves with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as directed. |
| 91 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type , complete all as directed. |
| 92 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. . |
| 93 | S&F Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) , complete all as directed. |
| 94 | S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as directed. |
| 95 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm, complete all as directed. |
| 96 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. |
| 97 | S&F Brass chromium plated shower rose 125mm size, complete all as directed. |
| 98 | S & F in repair grating doom round 140 mm size of PTMT (Minium weight 50 gms), complete all as directed. |
| 99 | S & Fin repairs, cast iron nahani trap 100mm dia with grating including jointing to waste pipe fixed in cement mortar (1:2:4) type B2 using 20mm graded crushed stone aggregate, complete all as specified and as directed. |
| 100 | S&F of Stack clamps for 100mm bore of pipes, made out of 50 mm by 5 mm flat iron and 16mm dia each round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as directed. |
| 101 | S & F 110mm bore,PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as directed. |
| 102 | S & F 75mm bore,PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 103 | S & F 110mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to walls etc with all necessary fixing arrangement, complete all as specified and directed. |
| 104 | S & F 75mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to walls, etc with all necessary fixing arrangement, complete all as specified and directed. |
| 105 | S & F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 106 | S & F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 107 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as directed. |
| 108 | Supply and fix for 75mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal,complete all as specified and as directed. |
| 109 | Supply and fix for 110mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal, complete all as specified and as directed. |
| 110 | S&F Curtain rod 25mm dia aluminium brass polished with ends bulbs rings of required size including bracket, complete all as directed. Make : Vista/lever ( All golden colour) |
| 111 | Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as directed. |
| 112 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as directed. |
| 113 | Brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4), complete all as directed. |
| 114 | M&L Brickwork with subclass "B" bricks, straight or curved onplan exc"6m mean radius built in cement mortar (1:6), complete all as directed. |
| 115 | M&L for 75mm thick plain cement concrete type C2 (1:3:6) (using 40mm graded crushed stone aggregate) in sub base flooring / plinth protection / hardstanding etc finished even and fair without using extra cement etc, complete all as specified and directed. |
| 116 | Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat ement slurry in floors with grey cement &pigments, complete all as directed. |
| 117 | Taking down wall panelling and similar work, complete all as directed. |
| 118 | S & F 4mm thick non asbestos fibre reinforced designer ceiling board (605mmx605mm) with hot drip heavy duty suspended ceiling grid system T-2430with GI frame work for seamless ceiling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section including Hangers 6 mm dia GI fixed to roof by means of ceilling cleats made out of GI flat as per manufacturer"s instructions andincluding dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including, cover fillets of any size, complete all as specified and directed. |
| 119 | S & F Solid PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet PVC sheet inclusive of solvent cement and fixing at site on PVC frame of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing to wall to make PVC frame as per specifications and drawing, complete all as directed. |
| 120 | S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. powder coating of any colour (Thickness or powder coating not less than 50 micron)complete all as directed all as directed. |
| 121 | S&F 5.5mm thick sheet glass, ordinary quality and glazing in aluminium section in square exc 0.5 sq. m in each pane,complete all as directed. |
| 122 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.,complete all as directed all as directed. |
| 123 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.),complete all as directed all as directed. Note: An amount of Rs.21685.00 on account of credit schedule for schedule "A" part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
