Dismantling Work A.��� Brick / Block Masonry Inclusive Of Its Finishing From Both Side. 2 2 Dismantling Work B.��� Existing Windows With Frame And Grill Approximate Size Of The Windows Including Grill 2.15 X 1.15 Meter. 3 3 Dismantling Work C. Disamntling Of Rcc Members Like Slab, Beams, Linttle, Etc.Of Any Grade, Size And At Any Level Including Cutting Of The Steel Reinforcement, Etc. Complete. 4 4 Excavation In Foundation Excavation Of Foundation Of All Types Of Soil / Rock, Plinth Protection Finishing, Soiling, Pcc Etc. For The Foundation Of The New Lift Well Up To Approx. 1.20 Meter Depth 5 5 Rubble Stone Soling Prepare Existing Excavated Soil Surface With Levelling, Compaction With Water And Remove Any Loose Material Etc. To Receive The Stone Soling 6 6 Plain Cement Concrete In Foundation Providing, Mixing And Laying In Position Atd Directed Location Plain Cement Concrete 1:2:4 ( 1 Cement: 2 Aggregates: 4 M-Sand ) Of Required Thickness Using Appropriate Size Aggregate 7 7 Lift Pit Waterproofing Providing And Laying Kotah Stone, In Proper Line And Level For Horizontal Surface, Using Stone Of Appx. Size 600Mm X 600Mm And About 22-25Mm Thickness Laid Over Cement Mortar Bedding 8 8 Rcc M25 ( 1:1:2 ) In Foundation And Super Structure A. In Sub-Structure Works Upto Plinth Level / Lift Pit Top 9 9 Rcc M25 ( 1:1:2 ) In Foundation And Super Structure B. In Super Structure Works 10 10 Tor Steel Reinforcement Providing, Cutting, Bending, Binding With Gi Wire And Placing In Proper Position In Proper Line & Level Of Required Diameter ( 8Mm To 20 Mm Dia ) Approved Brand Tor Reinforced Steel 11 11 Light Weight Block Masonry Providing And Constructing With 150 Mm Thick Single Light Weight Approved Make Block Masonry Wall Between Vertical M.S Steel Structure Columns 12 12 Light Weight Block Masonry Do As Above But With Minimum 230Mm Brick Masonry For Making Up The Damaged Wall Matching With The Existing Wall Surface Using Ready Mixed Cement Mortar Of Approved Make, Scaffolding, Forming The Key Joints, Curing, Etc. 13 13 Reinforced Pre-Cast Light Weight Panels Providing And Fixing Approved Make M25 Grade 100 Mm Thick Pre-Cast Light Weight Reinforced Panels Of Required Width To Create Projection All-Round Of Lift Well At Lift Machine Room Floor Level. 14 14 Structural Fabrication Work Providing, Fabricating And Erecting In Position As Per The Drawings Or As Directed By Banks Engineer Structural Frame Work Made Out Of Approved Make Channels, Angles, Flats, I- Beams, Plates, Etc. 15 15 Aluminium Composite Panel ( Acp ) Sheet Designing, Supplying, Providing And Fixing In Position Minimum 4Mm Thick Fire Rated ( Minimum 2 Hrs ) Of Approved Make And Colour Acp 16 16 Aluminium Composite Panel ( Acp ) Sheet Providing And Fixing In Proper Line, Level And Plumb Aluminium Frame Work Of Sections As Per The Required Deisgn Using Sections Of Approved Make. 17 17 Gi Plain Sheet In Roof Providing And Fixing In Position Minimum 2Mm Thick Gi Sheet Of Approved Make On The Roof Truss 18 18 Expansion Joint Providing And Fixing In Position Approved Make 1St Quality 25 Mm Thick Shalitex Board And Polysulphide Sealant In The Expansion Joint 19 19 Wooden Flush Door With Granite Frame I ) Providing And Fixing 16 To18mm Thick Machine Cut Mirror Polished� Jet Black Granite Stone In Two Pices Of Minimum 100 Mm & 180Mm Wide For Soffit And Jambs Of The Door Opening� 20 20 Fixed M S Grill In Windows Providing, Fabricating And Fixing In Position M.S Grill Fabricate With 25 X 6 Mm M S Flat As Per Drawing Enclosed. 21 21 Granite Window / Ventilator Jambs Providing And Fixing 300 Mm Total Wide Jambs, Soffit And Sill For Windows / Ventilators In Step Pattern ( 200Mm Outside & 100 Inside ) 22 22 Granite Lift Jambs Framing Providing And Fixing 15-16 Mm Thick Machine Cut One Side Mirror Polished Approved Colour, Design & Pattern Granite Stone As Lift Jambs, Soffit And Sill 23 23 Aluminium Fixed Glass Windows Providing And Fixing Fixed Type Fully Glazed Two Equal Panel Anodized Approved Aluminium Make Windows 24 24 Aluminium Ventilator Providing, Cutting, Fabricating And Fixing In Position Two Panel Fully Glazed Top Fixed And Bottom Central Pivoted Openable Ventilator Shutters 25 25 Solid Waste Management Permission Carrying Out All The Liasioning Work With Statutory Bodies For Obtaining Swm Plan Approval For The Work 26 26 Ready Mixed Plaster Providing And Applying Ready Mixed Plaster On, Columns, Rcc Walls, Etc. 27 27 Brick Work In Step Blocks Providing And Constructing, In Proper Line, Level And Plumb, Step Blocks Of Size As Directed By Banks Engineer Using Locally Available Bricks Using Ready Mixed Mortar 28 28 Chequerred Tiles And Kotah Stone For Threads And Risers Of The Steps Providing And Laying Chequerred Tiles In Threads Of Approved Make And Shade And One Side Mirror Polished Kotah Stone 29 29 Internal And External Painting Providing And Applying Of Two Or More Coats Of Exterior Grade Apex Paint Of Approved Make 30 30 Cgst Enter Cgst 31 31 Sgst Enter Sgst
