Military Engineer Services-MES has published Improvement In Officer Living In Billet And Smqs And Provision Of Parking Shed In Officer Mess At Af Station Gwalior Improvement In Officer Living In Billet And Smqs And Provision Of Parking Shed In Officer Mess At Af Station Gwalior. Submission Date for this Tender is 23-04-2022. Railway Ancillaries Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Apr-2022 | BOQ Corrigendum | BOQ | 16-04-2022 |
| 2 | 05-Apr-2022 | Tender Postponed | Date | 16-04-2022 |
| 3 | 16-Apr-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-04-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified anddirected. |
| 2 | M&L for non skid colouredceramic floor tiles7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6 ) complete all as specified and directed. |
| 3 | M&L for non skid, coloured ceramic tiles 7-8 mm thick of approved colour (square/rectangular) area of each tiles exc 0.11 but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed |
| 4 | M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc,set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles overrendering 10 mm thick in CM 1:3 on wall complete all as specified and directed. |
| 5 | Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavatedmaterial n exc 2.5 KM distance and depositing where as directed, complete all as specified and directed. |
| 6 | M&L, for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm gradred stone aggregate as in levelling course finished even and fair etc all as speciifed |
| 7 | Demolition of Stone slabs of any description or thickness in floors / kitchen platforms etc., complete all as specified and as directed. |
| 8 | M&L Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over and 20mm screed bed in CM 1:4 all as specified and directed. |
| 9 | S&F in repairs vitreous China WC pan pedestal pattern white (excludingflushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor complete all as specified and directed. |
| 10 | S&F seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected by Engr-in-charge. |
| 11 | Supply and fix in repairs ofPVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessoriesto wall complete all as specified and directed. |
| 12 | S & F in repairVitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass mixer fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed. |
| 13 | S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 14 | S&F in repair 15 mm bore 2-way bib cock with flange etc all as specified and directed. (Make- Jaquar Alive/Aira-CHR-85041, Plumber, Marc.) |
| 15 | S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed. |
| 16 | S&F in repair toubler towel rail 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified and directed. |
| 17 | S&F in repair Brass chromium plated health faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed |
| 18 | S&F Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union and, complete all as specified and as directed. |
| 19 | S&F in repair 15 mm bore CP wall mixer with provison for bath overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without overhead shower) fixed in iron pipes etc all as specified and directed. |
| 20 | S&F in repairs cabinet mirror of size0.45m x 0.30m PVC with cabin as per trade pattern and approved by GE complete all as specified and directed.Make :- Prayag/Commander or equivalent |
| 21 | S&F in repair brass Chromium Platedsoap dish complete all as specified and directed. |
| 22 | S&F in repair stainless steel grating 100 mm dia doom typewith waste hole fixed in cement complete all as specified and directed. |
| 23 | S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 24 | S&F fixed in repairssinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed. |
| 25 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)/Ventilatornot exe 1.5 Sqm each. |
| 26 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exe 1.5 Sqm but not exc 4.0 Sqm each. |
| 27 | Taking down shutters of any description area exc 1.00 but n.exc 2.00 sqm each |
| 28 | S&F pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete as specified and directed by Engineer-in-Charge. |
| 29 | M&L Cement Concrete 1:2:4 (12.5mm graded aggregate) in filling as in hold fasts and likes etc., complete all as specified and as directed. |
| 30 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed. |
| 31 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVCsheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed. |
| 32 | S&F factory made plain framed paneled shutter 35 mm thick IIndclass HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on bothface, the size of rail and style kiln seasoned and chemically pressure treated as spd and directed. |
| 33 | S&Ffor factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter ,divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified. |
| 34 | S & F butt hinges medium weight stainless steel and fixed 100mm size complete all as specified and directed. |
| 35 | S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long. |
| 36 | S&F aluminum handles cast type anodized 150 mm size. |
| 37 | S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 38 | M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed... |
| 39 | M&L for two coat of synthetic enamel paintover one coat of red oxide primer on new steel surface of any description not other wise described over 10 cm width or girth. |
| 40 | S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed. |
| 41 | Supply and fixing Sheet Glass ordinary quality, 4.0mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Window, Ventilator Shutters, complete all as specified and as directed. |
| 42 | Supply and fixing figured Glass 4.0mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Window, Ventilator Shutters, complete all as specified and as directed. |
| 43 | Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed. |
| 44 | M & L for rendering 10 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed. |
| 45 | M&L for rendering5 mm thick plaster on fair faces of concrete surfce in CM (1:3) as in ceilingfinishedeven and smoothwithout using extra cement as in ceiling complete all as specified and as directed |
| 46 | M&L for rendering5 mm thick plaster on fair faces of concrete surfce in CM (1:4) as in ceilingfinishedeven and smoothwithout using extra cement as in ceiling complete all as specified and as directed |
| 47 | M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC as per manufacture direction by wt of cement finished fair & even in CM 1:4 complete all as specified and directed. |
| 48 | M & Lpreparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty and primer , complete all as specified and directed. |
| 49 | M & L three coats of white washing on ceiling of new plastered surface, complete all as specified and directed. |
| 50 | M & Lpreparation of newly plastered surfaces of walls and applying two coats of exterior weather paint over a coat of wall care putty and primer , complete all as specified and directed. |
| 51 | M & Lpreparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer , complete all as specified and directed. |
| 52 | S&F in repair coloured powder coated Darpery Rod of aluminum 25mm inner dia with support of coloured powder coated aluminum decorative type desinge and pattern approved by GE including decorative brackets both ends complete all as specified. |
| 53 | Supply and fixing of rubber beading 40mm stripin bottom of door complete all as specified and directed. |
| 54 | M&L for complete removal of existing treatment from old surfaces of walls and applying 1mm thick wall care putty including suitable primer to obtain the desired/true surfaces and applying two coats oil emulsion distemper on putty prepared surfaces / old decorated surfaces as specified and directed. |
| 55 | M&L for preparation of old decorated surfaces of walls, pillars, cornices including brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts, trading oil & greasy spotsand stopping nails marks by applying white cement base putty as required and applyingone coat of exterior emulsion paint (Ace Paint from Asian Paint or wall Mast from Berger paint)completeall as specified and directed. |
| 56 | Preparation of plastered or unplastered old decorated surfaces of ceiling including cornices surfaces by brooming down or steel wire brushing to remove of dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and efflorescent salts and treating out greasy spots and applying two coat of white wash complete all as specified and as directed. |
| 57 | M&L for one coat of synthetic enamel paint over old painted surface of steel work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 58 | M&L for one coat of synthetic enamel paint over old painted surface of woodenwork of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 59 | M&L for Machine cut kota stone slab 20-25mm thick as in flooring laid over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed |
| 60 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes etc complete all as specified. |
| 61 | Granding existing kota stone flooring/skirting with stones and washing down with water and finaly polishing to the entire satisfaction of GE. |
| 62 | Supply and fixing of steel door spring of size 200mm in wooden/steel frame by welding or screwing which ever is appropriate for fixing in frame complete all as specified. |
| 63 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from sitecomplete all as specified andasdirected. |
| 64 | All as per item No 63 above but 20mm bore. |
| 65 | M&L for re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified andasdirected. |
| 66 | All as per item No 65 above but 20mm bore. |
| 67 | S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified andasdirected. |
| 68 | All as per item No 67 above but 20mm bore. |
| 69 | Taking down eves gutters and rain water pipe of any description with all fittings complete all as specified and directed. |
| 70 | S&F, PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ walls (110 mm bore)etc, all as specification |
| 71 | S&F, PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/walls (75 mm bore) ect complete all as specified and directe. |
| 72 | S&F, 100 mm bore PVC (SWR) bends and fixed in position with adhesive |
| 73 | S&F, 75 mm bore PVC (SWR) bends and fixed in position with adhesive |
| 74 | S&F PVC (SWR) 75 mm bore floor trap/nahani trapplain with grating including joints with solvent complete all as specified and directed. |
| 75 | S&F, 110 mm bore PVC (SWR) single T and fixed with adhesive |
| 76 | S&F, PVC (SWR) 110 mm bore vent cowl |
| 77 | M&L for repairing of RCC Chajjas/Sunshades at any height & of any size (soffits, sides and top) with cement mortar 1:4 after taking down plaster of chajjas carefully including dubbing out coat in cement mortar 1:3 where ever required and providing groove to the soffit of chajjas including top of Chajjas are to be provided with extra PCC 1:2:4 type B-1 as coving and applying three coats of white wash/ Ace paint / cement base paint to match with the existing specification are to be applying to Chajjas after the repair work is complete all as specified. |
| 78 | S&F in repair 18mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make cup board shutters, including demolition of existing cup board shutter complete all as specified and directed. Make :- Rajshree/Plastro green |
| 79 | S&F in repair 18mm thick solid UPVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make cup board shutters, including demolition of existing cup board shutter complete all as specified and directed. Make :- Rajshree/Plastro green |
| 80 | S & F in repair18mm thickPVC boardof grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make cup board sides top and bottom, shelves inside the cup board and shutter or drawerincluding demolition of existing board any type or specification complete all as specified and directed. Make: Rajshri celuka or equivalent as approved by GE. |
| 81 | S & F continuous (Piono) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 82 | S&F 125 mm size alum, Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 83 | S&F in repairs Magnet catchfor kitchen cabinet shutters as per approvedsample complete all as specified and directed. |
| 84 | S & F colour powder coated aluminium frame and shutters for door windows ventilators with one or more rebates or aluminium section of two or more traccks incase sliding windows including jointing cleat for fixing (minimum thickness of powder coating shall be 50 micron) complete all as specified and directed. |
| 85 | S&F aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 800mm incl fixing with aluminium hannel 1mm thick with steel screw and tint match with existing complete all as specified and as directed |
| 86 | S&Frotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top),double layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknutsetc. of 20 mm dia including dismantling of old PVCtank(Capacity 250- 500 Litres) & removing to where directed complete all as specified and as directed. |
| 87 | S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. |
| 88 | Supply only Integral Water Proofing Compound, conforming to IS-2465-1975 and/or as approved, complete all as specified. |
| 89 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil comlete all as specified and directed. |
| 90 | Excavating in trenches n"exc 1.5 m width and n"exc 1.5 m in depth for foundation etc n"exc 10 sqm on plan and n"exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 91 | Excavating in post holes (or similar holes) in soft/ loose soil, each n.exc 0.5 cum, getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. |
| 92 | M&L for brick work with old size full bricksubclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 93 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. |
| 94 | Removal of surplus spoil to a distance n"exc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 95 | M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concretecomplete all as specified and directed. |
| 96 | M&L for 15mm thick plastering on fair faces of brick wall in CM (1:6) surface finished even and fair complete all as specified and directed. |
| 97 | M&L for preparing newly plastered surfaces of wall and applying three coats ofwhite washcomplete all as specified and directed. |
| 98 | M&L for machine pressed precast concrete interlocking paver block60mm thickness, M-35 Grade with grey cement & pigment any shape and size confirming to IS 15658-2006 with and including over 50mm thich stone dust/ sand cushining complete all as specified and directed. |
| 99 | M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and selftapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces) |
| 100 | M&L for mild steel as in roof trusses (framed), trussed purlins, crane gantries, rail and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165) Quality A complete all as specified and directed. |
| 101 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. |
| 102 | M&L for PCC 1:2:4 type B-1 using 20 mm gradred stone aggregate as in coping, banching, kerbs rounded or chemfered on edges complete all as specified and directed. |
| 103 | Demolition of sunken slab floor or WC and bath including WC trap etc including taking down loose filling of aggregate in any type and removing where directed and providing water proofing treatment of sunken slab in following manner:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with water proof chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instruction. (b) Cleaning the concrete surface by brushing and watering and remove all surface imperfections.(c) Fixing 40mm dia pipe 450mm long bottom of the sunken and wraping of bath seal it (Bath seal tape product of Dr Fixit and grouting around the inserted pipes by pouring Dr fixit bath seal grout as directed).(d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners.(e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by volume and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per manufacturer instructions in sunken slab over brick bat.(g) Fill the sanitary gaps with Dr Fixit sealing compounds complete. |
| 104 | S&F in repair beveled edge best quality looking mirror of size 600x450 mm mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers complete all as specified and directed. |
| 105 | S&F corner glass shelf 8 mm thick (pack of three) (Chrome finish) of size 300mmx150mm, fixed with and including chromium plated brass screws and wooden/ plastic cleats, design and pattern approved by GE complete all as specified and directed. |
| 106 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and "S" or "P" traps (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified and directed. |
| 107 | S&F in repair fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down suitable for 15 mm bore GI pipe complete all as specified and directed. Make: Prayag/ Jaquar/Hindware |
| 108 | S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "hot" or "cold"with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed. |
| 109 | S&F in repair of fancy typeoverhead shower with arm swivel joint chromium plated screwed down of 15mm bore complete all as specified and directed. Make: Prayag/ Jaquar/Hindware |
| 110 | S&F 35mm thick flush shutters, ISI mark, solid core construction with block board core and ply wood face panels, commercial type on both sides for following thickness complete all as specified and directed. |
| 111 | S&F 100 mm long butt hinge, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 112 | S&F aluminium handles cast type anodised 125mm size complete all as directed and specified. |
| 113 | M&L for framed rolled section as in framing for cladding, glazingfixed with angle cleats or other connecting plates/ bolts, conforming to Fe-290(Gde-E-165)complete all as specified and as directed. |
| 114 | M&L for cast iron floor trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, of 75mm outer dia complete all as specified & directed. |
| 115 | M&L for cast iron Nahani trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1,for 75mm dia complete all as specified & directed. |
| 116 | S&F in repair cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, with cement joints and fixed to wall for 75mm bore of pipes complete all as specified and directed. |
| 117 | S&F in repair cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears, with cement joints and fixed to wall for 100mm bore of pipes complete all as specified and directed. |
| 118 | S&F in repair CI branch pieces, double (equal or unequal), ordinary or inverted(spigot/socketed type) or with parallel branches with oval access doorsfor 100mm bore of pipe complete all as specified and directed. |
| 119 | S&F in repair CI branch pieces, double (equal or unequal), ordinary or inverted(spigot/socketed type) or with parallel branches with oval access doorsfor 75mm bore of pipe complete all as specified and directed. |
| 120 | Taking down carefully existing unserviceable aluminum point wiring of any description & in any position with and includingpvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’. |
| 121 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor cable FR, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (Medium grade) of suitable size not less then20mm dia all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/junction boxes with and including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor cable FR single core. PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. |
| 122 | NOTE : (i) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing colour of surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of 8covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thicklaminated sheet fixed with suitable GI screws and cup washers)(ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of BOQ (Make of Cable/wire:- : Havells /Finolex/Polycab/GrandlayMake of PVC Conduit:-Finolex/Ess Ess Kay Engineering, Make of Laminated Sheet:-/Hylam/National) |
| 123 | All as per item No 121 here-in-beforebut point wiring for one six pin socket outlet, 15/5 Amps (independent board) controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor |
| 124 | M & L forswitch flush type single pole one way 5 Amps, 240 volts, white/ ivory finish complete all as specified.(Make :- Anchor(Panta)/ Cona/ Leader) |
| 125 | S&F for switchsocket combination multi purpose, 6 Pin 6/16 amps, flush typeWith Indicator complete all as specified and directed. Make:-Cat part No 2711 of cona or equivalent of Leader/ Anchor(Panta). |
| 126 | M&L for ceiling rose surface Bakelite three terminal, 18 x 50 mm complete all as specified. (Make :- Anchor(Panta) , Cona , Leader) |
| 127 | M&L for lamp holder insulated body with back plate for batten fitting complete all as specified.(Make :- Anchor(Panta) , Cona , Leader) |
| 128 | S&F LED mirror light complete with high output diffuser 2 Feet 10 Watt 220 V AC decorative type complete all as specified and directed. Make: Havells/ CG/Philips |
| 129 | S&F for sheet metal enclosure Double door for DB’s 8way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires.Completeall as specified. (Make;ABB,Schneider,Legrand, havells) |
| 130 | Dismantling & Taking out MCB"s/ Isolatotrs and metal clade box of any size complete all as specified and directed. |
| 131 | S&F for MCB single pole 6 to 32 Amps, "B" Curve, 10KA ,240 Volts complete all as specified (Make:Legrand/ABB/Schneider/Havells) |
| 132 | S&F for MCB Single pole and neutral 40 to 63 Amps 10 KA, "B" series, 240 Volts complete all as specified. (Make:Legrand/ABB/Schneider/Havells ) |
| 133 | M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductorof size 6 Sqmm as earth continuity conductor cable FR all as specified and directed including taking down old submain wiring with any type of conduit. Complete all as specified. (NOTE :Two run of single core PVC cable with one run ofearth conductor and conduit shall be measured as one unit.) incl taking out old sub main wiringwith any type of conduit. |
| 134 | M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washersall as specified.(Make:ABB/Schneider/Legrand) |
| 135 | Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified. (Make-Havell"s Cat Part No LUMILINEBS20WLED865SPCWH/Surya Cat No -SLEBT -20 /CG cat No -LCTL 18 CDL) |
| 136 | NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
