}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 30926318

    • Supply Of Corner Roller, Tamping Arm Amp Cutter Barcorner Roller, Tamping Arm Amp Cutter Bar,Clamp Roller Confirming To Plasser Part No. Glf311.810 , Track Lifting Roller With Key & Nut For Bcm Plasser Part No. 64.14.1214 As Per Rdso Specification No. Tm/-Delhi

    Northern Railway has published Supply Of Corner Roller, Tamping Arm Amp Cutter Barcorner Roller, Tamping Arm Amp Cutter Bar,Clamp Roller Confirming To Plasser Part No. Glf311.810 , Track Lifting Roller With Key & Nut For Bcm Plasser Part No. 64.14.1214 As Per Rdso Specification No. Tm/. Submission Date for this Tender is 23-02-2022. Railway Ancillaries Tenders in Delhi. Bidders can get complete Tender details and download the document.




    Tender Notice

    30926318
    Supply Of Corner Roller, Tamping Arm Amp Cutter Barcorner Roller, Tamping Arm Amp Cutter Bar,Clamp Roller Confirming To Plasser Part No. Glf311.810 , Track Lifting Roller With Key & Nut For Bcm Plasser Part No. 64.14.1214 As Per Rdso Specification No. Tm/
    Tender
    Indian
    Delhi
    23-02-2022

    Tender Details

    Supply Of Corner Roller, Tamping Arm Amp Cutter Barcorner Roller, Tamping Arm Amp Cutter Bar,Clamp Roller Confirming To Plasser Part No. Glf311.810 , Track Lifting Roller With Key & Nut For Bcm Plasser Part No. 64.14.1214 As Per Rdso Specification No. Tm/Hm/6/21 (Rev-1) & Drg. No. Tm/9322 Material &Physical Properties Gr.40, Cr.4 Mo.3, To Is:5517-1978 (Spec. Of Steel For Hardening And Tempering) Should Be Manufactured From Single Cast Mono-Block (I.E. No Weld Joint Between Stud And Disc Should Be Manufactured From Single Cast Mono-Block (I.E. No Weld- Joint Between Stud And Disc Should Be There), Hardness:220 Bhn Max. Heat Treatment- Normalized At 8500C To 8800C, Hardened At 8500C To 8800C, Quenched In Oil And Tempered At 5500C To 7200C, Details As Per Rdso Specification No. Tm/Hm/6/21. , U Clamp (Complete) Size 16Mm Dia Of M.S. Rod With 2 Nos. Nut, 2 Nos. Spring Washer & 1 No. Locking Of 8Mm Thick Plate Of Suitable Length Pt No. 64.09.5208 And Arrangement For Fixing Of Screen Mesh With Strip Nut Complete Confirming To Plasser Part No. 64.09.5248. All Above Parts Should Be Galvansining Coat Hight Of U Clamp 180 Mm Required For Bcm & Frm , Corner Roller For Bcm Plasser Part No. 64.08.5000.21 Each Corner Roller Consists Of 11 Item As Per Annexure-A. , Cutter Bar Confirming To Plasser Part No. Rm.08.25.2150.01 , Vibration Shaft For Mfi Confirming To Plasser Part No. Cu20.301 , Tamping Arm Big For Wst Made Out Of En-19 Duly Casted Machined Ground Finished Outer Surface Should Be Smooth & Painted With Red Oxide Paint Confirming To Plasser Part No.Cu30.412 , Tamping Unit Arm (Right Side) For Unimat Made Out Of En-19 Duly Casted Machined Ground Finished Outer Surface Should Be Smooth & Painted With Red Oxide Confirming To Plasser Part No. W37.1703 , Tamping Unit Arm (Left Side) For Unimat Machine Made Out Of En-19 Duly Casted Machined Ground Finished Outer Surface Should Be Smooth & Painted With Red Oxide Confirming To Plasser Part No. W37.1702L , Wheel Axle For Utv Confir

    Key Value

    Document Fees
    Refer document
    EMD
    Refer document
    Need MSME Loan? Apply Now
    Tender Value
    Refer document
    RBbranding
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    RBTendersdetails2
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail