Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-02-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-02-2022 |
| 2 | 07-02-2022 | AMENDMENT_2 | BOQ | 16-02-2022 |
| 3 | 07-02-2022 | AMENDMENT_1 | Date | 16-02-2022 |
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified & directed by the Engineer-in-Charge. |
| 2 | Excavation in trenches in soft/loose soil, not exceeding 1.5m wide and not exceeding 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 3 | Excavation in trenches in soft/loose soil, not exceeding 1.5m wide and exceeding 1.5 m but not exceeding03 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Material & labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation, sub base, filling and mass concrete and post holes complete all as specified & directed by the Engineer-in-Charge. |
| 5 | Material & labour for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by the Engineer-in-Charge. |
| 6 | Material & labour for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by the Engineer-in-Charge. |
| 7 | Material & labour for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed by the Engineer-in-Charge. |
| 8 | Material & labour for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by the Engineer-in-Charge. |
| 9 | Material & labour for formwork to (flat rough finished surfaces of concrete) sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified & directed by the Engineer-in-Charge. |
| 10 | Material & labour for formwork to (rough finished surfaces of concrete) sides of pillars, posts, struts, piers, columns and stanchions (square,rectangular or polygonal) complete all as specified & directed by the Engineer-in-Charge. |
| 11 | Material & labour for formwork to (flat rough finished surfaces of concrete) sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified & directed by the Engineer-in-Charge. |
| 12 | Material & labour for formwork to (flat rough finished surfaces of concrete) soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified & directed by the Engineer-in-Charge. |
| 13 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed by the Engineer-in-Charge. |
| 14 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge. |
| 15 | Earth filling under floors including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and as directed.Note :- Earth obtained from excavation underhere-in-before shall be used for filling. |
| 16 | Material & labour for hardcore of Broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surfacecomplete all as specified & directed by the Engineer-in-Charge. |
| 17 | Material & labour for 25mm thick PCC 1:2:4 type B0(using 12.5 mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge. |
| 18 | Material & labour for coloured glazed vitrified tiles of size600 mm x 600 mm and8 to 10 mm thick in floors, set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick screed bed or bedding layer in cement mortar (1:4) etc, complete all as specified & directed by the Engineer-in-Charge. |
| 19 | Material & labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge . |
| 20 | Material & labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls including surface finished even and smooth without using extra cementcomplete all as specified & directed by the Engineer-in-Charge. |
| 21 | Material & labour for 15 mm thick rendering in cement mortar 1:6 on stone masonary surface or surface other than fair face of brick work of walls including surface finished even and fair,complete all as specified & directed by the Engineer-in-Charge. |
| 22 | Material & labour for 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces or brick work on ceilings including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 23 | Material & labour for preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Supply & fixing Aluminium sections ofapproved colour powder coated (Thickness of powder coating not less than 50 micron) as in aluminium frame for doors , windows, ventilators, partition wallwith one or more rebates including joining cleat for fixing etccomplete all as specified & directed by the Engineer-in-Charge. |
| 25 | Supply & fixingaluminium door shutters,powder coated of approved colour (Thickness of powder coating not less than 50 micron), door shutter fixed type without sash bar, aluminium sections weighing 0.55kg/m including necessary fittings like joining cleat, glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , aluminium handles 02 Nos of required size in each door, stainless steel hinges complete all as specified & directed by the Engineer-in-Charge. |
| 26 | Supply & fixingaluminium window and ventilator shutters,powder coated of approved colour (Thickness of powder coating not less than 50 micron), window and ventilator shutter fixed type without sash bar, aluminium sections weighing 0.55kg/m including necessary fittings like joining cleat, glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , aluminium handles 02 Nos of required size in each leaf, stainless steel hinges complete all as specified & directed by the Engineer-in-Charge. |
| 27 | Supply & fixing butt hinges medium weight, cold rolled mild steel, of size 125mm long complete all as specified & directed by the Engineer-in-Charge. |
| 28 | Supply & fixing Aluminium anodised, barrel tower bolts 150 mm long of extruded section and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 29 | Supply & fixing Aluminium anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 30 | Supply & fixing extruded aluminium alloy handles 100 mm long, fabricated type, anodised complete all as specified & directed by the Engineer-in-Charge. |
| 31 | Supply & fixing extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified & directed by the Engineer-in-Charge. |
| 32 | Supply and fixing 250mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 33 | Supply & fixing floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring over all length of cover plate 150 mm complete all as specified & directed by the Engineer-in-Charge. |
| 34 | Supply and fixing sheet glass ordinary quality 5.5 mm thick fitted with beading/putty, in squares exceeding 0.5 sqm in each pane complete all as specified & directed by the Engineer-in-Charge. |
| 35 | Supply & fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed by the Engineer-in-Charge |
| 36 | Material & labour for 18 to 20mm thick Granite work (of any type) machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms etcin one piece as required size and set, bedded in 20 mm thick cementmortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ofgranite complete all as specified & directed by the Engineer-in-Charge.. |
| 37 | Material & labour for rounding/chamfering to edges of stone slabs like granite, marble, kota stone etc to required shape and design including grinding and polishing to obtain required finish, as in steps, cooking platform, and other similar situations complete all as specified & directed by the Engineer-in-Charge. |
| 38 | Material & labour for 10 mm thick rendering in Cement Mortar 1:4 mixed with & includingwater proofing compound @ 3% by weight of cement, on concrete surfaces while concrete surface is green on roof, finishing even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 39 | Material and labour for Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete all as specified & directed by the Engineer-in-Charge. |
| 40 | M&L for reinforcement TMT bars bar 5 mm dia and over as in stirrups and over cut to length, bent to shape required, Including cranking, bending, hooking ends and binding with and Including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to IS complete all as directed. complete all as specified and as directed. |
| 41 | Supply & fixing PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by the Engineer-in-Charge. |
| 42 | Supply & fixing PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by the Engineer-in-Charge. |
| 43 | Supply & fixing PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 44 | Supply & fixing PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 45 | Supply & fixingPVC (SWR) bend any radius of 110 mm bore complete all as specified & directed by the Engineer-in-Charge |
| 46 | Supply & fixingPVC (SWR) bend any radius of 75 mm bore complete all as specified & directed by the Engineer-in-Charge |
| 47 | Supply & fixing PVC (SWR) junction of bore 110 mm dia, single (single T) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 48 | Supply & fixing PVC (SWR) junction of bore 75 mm dia, single (single T) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 49 | Supply & fixing PVC (SWR) vent cowl of bore 110 mm dia complete all as specified & directed by the Engineer-in-Charge |
| 50 | Supply & fixing PVC (SWR) vent cowl of bore 75 mm dia complete all as specified & directed by the Engineer-in-Charge |
| 51 | Supply & fixing PVC (SWR) floor trap of 75 mm dia outlet, plain with grating including jointing with solvent cement complete all as specified & directed by the Engineer-in-Charge. |
| 52 | Supply & fixing Salt-glazed stoneware gully traps 100mm x 100 mm, square or round mouthed, type \"P complete all as specified & directed by the Engineer-in-Charge. |
| 53 | Supply & fixing stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75 mm dia pipe complete all as specified & directed by the Engineer-in-Charge. |
| 54 | Supply & fixing stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100/110 mm dia pipe complete all as specified & directed by the Engineer-in-Charge. |
| 55 | Supply & fixing bevelled edge looking mirror of selected quality glass fixed to wooden plugs with chromium plated brass screws and cup washers in position and decorative beading as approved by GE complete all as specified and directed. |
| 56 | Material & labour for glazed ceramic coloured tiles of approved design pattern of size 450mm x 350mm/ 450 mm x 300 mm / 600mm x 300mm as approved by GE and 7 to 8 mm thick, in vertical surface as in dado, set andjointedin neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles, laid over and including 15 mm thick rendering in cement mortar 1:4 on stone masonry surface or surface other than fair faces of brick work complete all as specified and as directed by the Engineer - in - Charge. |
| 57 | Supply & fixing solid PVC double door frame of size 50mm x 95mm made out of 5mm wood grain printet PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing shown in SSR part 1 2009 complete all as specified and as directed by the Engineer - in - Charge. |
| 58 | Supply & fixingfactory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2m thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete as per specification & drawing complete allas specified and directed . |
| 59 | Supply & fixing Vitreous China wash down water closet pan (pedestal pattern), white and trap including PVC sheet cover closed pattern with flat bottom and cover and mild steel chromium plated hanging device and connection to drain flush pipe and anti-syphonage type complete all as specified and as directed by the Engineer - in - Charge |
| 60 | Supply & fixing Vitreous China wash hand basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed by the Engineer - in - Charge. |
| 61 | Supply & fixing 15 mm bore central hole basin mixer Brass CP for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 62 | Supply & fixing Bib taps, chromium plated, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Supply & fixing two way bib cock, fancy type, brass chromium plated, 15 mm borecomplete all as specified and as directed by the Engineer-in-Charge. Make CERA cat part No F3001163 or equivalent of makes given in Appx \"B\". |
| 64 | Supply and fixing 15 mm dia angle stop valves,brass chromium plated, screwed for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 65 | Supply and fixing CP waste coupling 32 mm dia with long shank andfly nuts etc for wash basins complete all as specified and directed. |
| 66 | Supply and fixing in repair CP waste coupling 32 mm dia with long shank andfly nuts etc for wash basins complete all as specified and directed. |
| 67 | Supply and fixing PVC flexible waste pipe 32 mm dia with sockets for steel sink upto floor level and length not less than 0.6 m complete all as specified and directed. |
| 68 | Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 69 | Supply and fixing Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)complete all as specified and directed. |
| 70 | Supply and fixing brass chromium plated towel rack complete all as specified and directed. Make CERA cat part No F5002102 or equivalent of makes given in Appx \"B\". |
| 71 | Supply and fixing brass chromium plated soap dispenser complete all as specified and directed. Make CERA cat part No F5002111 or equivalent of makes given in Appx \"B\". |
| 72 | Supply and fixing toilet paper holder, white, vitreous China, box type complete all as specified & directed by the Engineer-in-Charge. |
| 73 | Supply & fixing Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)complete all as specified & directed by the Engineer-in-Charge. |
| 74 | Supply & fixing mild steel chromium plated health faucets (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specifiedd & directed by the Engineer-in-Charge. |
| 75 | Supply & fixing rotational moulded polyethylene water storage tank of capacity 500 Litres (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade 20mm dia over flow pipe 450mm long and waste pipe 600mm long with all fitting etc.including 20mm bore PTMT symet body flot valve with ball and rod complete all as specified & directed by the Engineer-in-Charge. |
| 76 | Supply & fixing 15mm bore, medium grade, galvanised iron pipe, with all fittings & fixed to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 77 | Supply & fixing 20mm bore, medium grade, galvanised iron pipe, with all fittings & fixed to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 78 | Supply and fixing aluminium grill of make \" Deco grillDG-104 model or equivalent as approved by GE having size of mesh 102mm x 99mm and weight not less than 2.45 kg/sqm and fitted into suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and as directed by Engr-in-Charge |
| 79 | Supply & fixing vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, spreader (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed by the Engineer-in-Charge. |
| 80 | Supply & fixing PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with intlet, ball valve, float & handle including brackets complete all as specified and as directed by the Engineer - in - Charge |
| 81 | Supply & fixing aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 82 | Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed by the Engineer-in-Charge. |
| 83 | Material & labour for Reinforced concrete pipes 150mm dia, class NP2, laid & jointed complete with collars, in trenches complete all as specified and directed by the Engineer-in-Charge. |
| 84 | Material & labour for 15 mm thick rendering in cement mortar 1:4 on stone masonary surface or surface other than fair face of brick work of walls including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 85 | Material & labour for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 86 | Material & labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed by the Engineer-in-Charge. |
| 87 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified & directed by the Engineer-in-Charge. |
| 88 | Add or deduct for each 25 mm girth or part thereof over or under 30cminner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. |
| 89 | Material & labour for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified & directed by the Engineer-in-Charge. |
| 90 | Material & labour for providing 50 mm thick sand stone slabs in man hole covers, sun shades, chajjas, shelves, cills, landings, cover stones, templates, etc. not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete complete all as specified & directed by the Engineer-in-Charge. |
| 91 | Material & labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) smooth finished, and reforming benching as required, for 150 mm bore Internal dia of pipe complete all as specified & directed by the Engineer-in-Charge. |
| 92 | Dismantling, floor, hearth or wall tiling /terrazo including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed by the Engineer-in-Charge. |
| 93 | Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified & directed by the Engineer-in-Charge. |
| 94 | Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by the Engineer-in-Charge. |
| 95 | Taking downcement or cement lime plaster work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc, complete all as specified & directed by the Engineer-in-Charge. |
| 96 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-Charge. |
| 97 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge. |
| 98 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)not exceeding 1.5 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge. |
| 99 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 100 | Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 15 mm bore pipe complete all as specified & directed by the Engineer-in-Charge. |
| 101 | Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 20 mm bore pipe complete all as specified & directed by the Engineer-in-Charge. |
| 102 | Dismantlingold unserviceable water storage tank (PVC/RCC/AC) of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified & directed by the Engineer-in-Charge. |
| 103 | Taking down CI/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed.Note:-Measurement shall be taken overall as fixed along the centre line over fittings and accessories. |
| 104 | Demolition and breaking up drain pipes of 150 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed by the Engineer - in - Charge |
| 105 | Taking downold Tarfeltofexiting water proofing treatmenton RCC roof surfaces including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including removing debris out site of MD landcomplete all as specified & directed by the Engineer-in-Charge. |
| 106 | Material & labour for 25mm thick PCC 1:2:4 type B0(using 12.5mm graded stone aggregate) as in levelling course/ roof padding mixed with & including water proofing compound @ 3% by weight of cement , surfaces finished even and fair on roof / chajjas etc complete all as specified & directed by the Engineer-in-Charge. |
| 107 | Material & labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 with and including water proofing compound as per manufacturer\"s instruction complete all as specified & directed by the Engineer-in-Charge. |
| 108 | Material and labour for cutting grooves in stone/brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3complete all as specified & directed by the Engineer-in-Charge. |
| 109 | Material and labour for preparation of concrete surfaces and applyingbituminous primer (conforming to IS : 3384-1965 ) @ 0.40 Kg/Sqm complete all as specified & directed by the Engineer-in-Charge. |
| 110 | Material & labour for applying evenly a tack coat of industrial bitumen of grade 85/25@ 1.2 kg per sqm including cleaning surfaces( Ist coat for bonding materialbelowmembrane and IInd coaton top of membrane) complete all as specified & directed by the Engineer-in-Charge.Note:- Each coat shall be measured and paid seperately. |
| 111 | Supply and laying Atactic polypropylene modified polymeric standard membrane of minimum 3 mm thickness, weight not less than 3kg/sqm, reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application and finally finished with aluminium paint @ 0.20 litre per sqm complete all as specified & directed by the Engineer-in-Charge. |
| 112 | Material & labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, benching etc complete all as specified and directed by the Engineer-in-Charge. |
| 113 | Material & labour for 15 mm thick rendering in Cement Mortar 1:4 mixed with water proofing compound @ 3% by weight of cement, on concrete surfaces while concrete surface is green on roof, finishing even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge.Note :- Water proofing compound shall be measured and paid separately as supply only |
| 114 | Cleaning of roof slab/chajjas with sweeping with brooms, removing all depositions/ mud / vegetations etc and removing the spoil to a distance not exceeding 50 meter complete all as specified & directed by the Engineer-in-Charge. |
| 115 | Cutting of tree branches and felling of trees girth not exceeding 30 cm and removing the tree branches to a distance not exceeding 50 meter, clearing the site complete all as specified & directed by the Engineer-in-Charge. |
| 116 | Supply only integral water proofing compound complete all as specified & directed by the Engineer-in-Charge. |
| 117 | Material and labour for 20-25mm thick machine cut kota stone slab flooring with Kota stone of size 550mm x 450 mm / 550mm x 550 mm,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with bee wax polish laid over & including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete complete all as specified and directed by the Engineer-in-Charge. |
| 118 | Material & labour for coloured Non-skidceramic tiles 7 to 8 mm thick (square/rectangular) polished, area of each tile exceeding 0.11 Sqm but not exceeding 0.28 Sqm as in floors etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick screed bed in cement mortar (1:4)complete all as specified & directed by the Engineer-in-Charge. |
| 119 | Material & labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 120 | Material & labour for 15 mm thick rendering in Cement Mortar 1:4on stone masonary surface or surface other than fair face of brick work of walls including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 121 | Material & labour for preparation of newly plastered or unplastered surface of walls and applying two coats of cement based paint in pattern as approved by GE/User unit including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 122 | Material & labour for preparation of new plastered or unplastered surfaces of walls and applying three coats of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 123 | Material & labour for preparation of new plastered or unplastered surfaces of walls and applying 2 mm thick white cement base wall care putty and applyingtwo coats of oil emulsion distemper, white or tinted over a coat of alkali resistant primer including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Material & labour for preparation of old plastered or unplastered surfaces of walls and applyingtwo coats of oil emulsion distemper, white or tinted over a coat of alkali resistant primer including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 125 | Material & labour for preparation of old plastered or unplastered surfaces of walls and applying one coat of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 126 | Material & labour for preparation of old plastered or unplastered surface of walls and applying two coats of cement based paint in pattern as approved by GE/User unit including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 127 | Material & labour for cutting chases in stone concrete block or slab walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified & directed by the Engineer-in-Charge. |
| 128 | Supply & fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white and trap including connection to drain flush pipe and anti-syphonage type complete all as specified and as directed by the Engineer - in - Charge |
| 129 | Supply & fixing in repairs PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with intlet, ball valve, float & handle including brackets complete all as specified and as directed by the Engineer - in - Charge |
| 130 | Supply and fixing in repairs 15 mm dia angle stop valves,brass chromium plated, screwed for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 131 | Supply & fixing in repairs mild steel chromium plated health faucets (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specifiedd & directed by the Engineer-in-Charge. |
| 132 | Supply and fixing in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 133 | Supply & fixing in repairs Bib taps, chromium plated, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 134 | Supply and fixing in repairs 15 mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down complete all as specified and as directed by the Engineer-in-Charge. |
| 135 | Supply & fixing in repairs Pillar taps fancy type, brass chromium plated, 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed by the Engineer - in - Charge |
| 136 | Supply & fixing in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed by the Engineer - in - Charge. |
| 137 | Supply & fixing in repairs600mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 4 to 5 mm thick PVCboard packing and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 138 | Supply & fixing in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by the Engineer-in-Charge. |
| 139 | Supply and fixing in repair PVC flexible waste pipe 32 mm dia with sockets for steel sink upto floor level and length not less than 0.6 m complete all as specified and directed by the Engineer-in-Charge. |
| 140 | Supply and fixing in repairs 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (weight not less than 210 gms) complete all as specified and directed. |
| 141 | Supply and fixing in repairs chromium plated grating of size 100 mm dia complete all as specified and directed. |
| 142 | Supply and fixing in repairs chromium plated grating of size 100 mm dia, with central hole complete all as specified and directed. |
| 143 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 144 | Supply & fixing in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by the Engineer-in-Charge. |
| 145 | Supply & fixingPVC (SWR) bend any radius of 110 mm bore with access doors complete all as specified & directed by the Engineer-in-Charge. |
| 146 | Supply & fixing PVC (SWR) branch piece of bore 110 mm dia, single (single Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 147 | Supply & fixing PVC (SWR) branch piece of bore 110 mm dia, double (double Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 148 | Supply & fixing PVC (SWR) couplers of bore 110 mm dia complete all as specified & directed by the Engineer-in-Charge |
| 149 | Supply & fixingPVC (SWR) bend any radius of 75 mm bore with access doors complete all as specified & directed by the Engineer-in-Charge |
| 150 | Supply & fixing PVC (SWR) branch piece of bore 75 mm dia, single (single Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 151 | Supply & fixing PVC (SWR) branch piece of bore 75 mm dia, double (double Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 152 | Supply & fixing PVC (SWR) couplers of bore 75 mm dia complete all as specified & directed by the Engineer-in-Charge |
| 153 | Supply & fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed by the Engineer-in-Charge. |
| 154 | Supply and fixing in repairs tublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed by the Engineer-in-charge. |
| 155 | Supply & fixing in repairs MS powder coated peg sets of 3 Nos peg set of good quality, complete all as specified and directed. |
| 156 | Supply & fixing in repairs brass chromium plated fancy type towel ring square and round flange as approved complete all as specified and directed by the Engineer-in-Charge. |
| 157 | Supply and fixing frosted glass panes 5.5 mm thick fitted with oil putty or fixed in aluminium door/windows complete all as specified & directed by the Engineer-in-Charge. |
| 158 | Supply & fixing factory made Box type Ventilators (primer coated), ERWBox made from 1.25 mm thick CRC sheet, & ERW hollow P sections of size 60mm X 25mm including grill using 10 sqmm bar double riveted both gauge and glass shutter comprised gauged, glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) four numbers of each window including following fittings welded to frame shutter,including dismantling & taking down the old unserviceable window :-(a) MS Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per ventilator(b)MS handle of Z section 20mmX25mm, 100 mm long -01 no per leaf(c) Stainless steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm,100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS Box type hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directedNOTE:- During fixing of ventilator surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement . |
| 159 | Supply & fixing factory made Box Type Steel windows(primer coated), ERWBox made from 1.25 mm thick CRC sheet, &ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter,including dismantling & taking down the old unserviceable window :-(a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per window(b)handle of Z section 20mmX25mm, 100 mm long -01 per leaf(c) stainless steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed.NOTE:- (i) During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement. |
| 160 | Supply & fixing mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ; framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts etc similar work conforming to Fe.290 grade E-265 including taking down old unserviceable steel work complete all as specified & directed by the Engineer-in-Charge. |
| 161 | Supply & fixing prelaminated flush shutters, 30mm thick solid core construction, with block board core and plywood face panels commercial type on one side and decorative type on other side, 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified & directed by the Engineer-in-Charge. |
| 162 | Supply & fixing 35 mm thick second class hord wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifiedd & directed by the Engineer-in-Charge. |
| 163 | Supply & fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by the Engineer-in-Charge. |
| 164 | Supply & fixing in repairs aluminium extruded section body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 165 | Material & labour for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width and girth by filling coat with grey filler or liquid wool filler transparent and bringing forward surfaces to smooth even finish and applying two coats of synthetic enamel paint over andincluding a coatof pink primer complete all as specified & directed by the Engineer-in-Charge. |
| 166 | Material & labour for preparation of old or previously treated wooden surfaces of any description not otherwise described over 10 cm width and girth by filling coat with grey filler or liquid wool filler transparent and bringing forward surfaces to smooth even finish and applying two coats of synthetic enamel paint complete all as specified & directed by the Engineer-in-Charge. |
| 167 | Material & labour for preparation of new steel surface of any description over 10 cm width and girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primercomplete all as specified & directed by the Engineer-in-Charge. |
| 168 | Material & labour for preparation of old steel surface of any description over 10 cm width and girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primercomplete all as specified & directed by the Engineer-in-Charge. |
| 169 | Supply & fixing in repair 18 mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side with white colour fixed with screw, solvent cement/adhessive as in Kitchen cabinet and similar works etc complete all as specified and directed by Engineer-in-charge. |
| 170 | Supply & fixing in repair 18 mm thick solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive for making furniture/ wall panelling/ Cup board shutters etc complete all as specified and directed by Engineer-in-charge. |
| 171 | Supply & fixing cast brass fanlight catch with 14mm catch and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 172 | Supply & fixing mild steel Continuous (piano) hinges,Width of flaps (when open) not less than 30mm,complete all as specified & directed by the Engineer-in-Charge. |
| 173 | Supply & fixing in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed by the Engineer-in-Charge |
| 174 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames complete all as specified & directed by the Engineer-in-Charge. |
| 175 | Supply and fixing sheet glass ordinary quality 4 mm thick in squares not exceeding 0.5 sqm in each pane, glazing with oil putty or fixed with fillets of 2nd class hardwood of sectional area not exceeding 3 sqcm complete all as specified & directed by the Engineer-in-Charge.Note:- Hardwood beading shall be measured and paid seperately as supply only. |
| 176 | Supply only 2nd class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. complete all as specified and directed by the Engineer-in-Charge. |
| 177 | Excavation in trenches in HARD ROCK, not exceeding 1.5m wide and not exceeding 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 178 | Excavation in trenches in HARD ROCK, not exceeding 1.5m wide and exceeding 1.5 but not exceeding 03 metre in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 179 | Material & labour for squared rubble walling, Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge. |
| 180 | Material & labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping bed blocks and like including necessary formwork and finishing surfaces fair and even without using extra cement complete all as specified and directed by the Engineer-in-Charge. |
| 181 | Removing excavated soil to a distance exceeding 250 metre but not exceeding 500 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge. |
| 182 | Taking down carefully copper/aluminium point wiring light, fan, socket or power complete, such as switches, ceiling roses,pendents, regulators, sockets etc. removing materials to store for keeping in safe costudy or for taking credit and making good disturbed surface of walls, floors etc.Complete all as specified and directed by Engineer-in-Charge. |
| 183 | Material & labour for point wiring for One light / fan point controlled by one switch5 Amp, SP, one way240 volts, with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and including 20mm dia medium grade rigid PVC conduit (ISI marked) (thickness not less than 1.8 mm) concealed in wall, with all accessories including pressed steel terminal sunken boxes suitable for modular fittings including 1.5 sqmm size PVC insulated unsheathed FRLS copper conductor multistranded cable for continuous earth conductor to common earth and connecting to earth dolly, including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified & directed by Engineer-in-Charge. |
| 184 | All as per Item Ser No 183.00 here-in-before but for 5 amp socket on same board |
| 185 | All as per Item Ser No 183.00 here-in-before but for 5 amp socket on independent board |
| 186 | All as per item No. 183 here-in-before but with 4 Sqmm FRLS copper cable for independent 15 Amps socket outlet and including 2.5 Sqmm PVC insulated copper conductor unsheathed 1100 Volt grade IS-694 FRLS cable for continous earth wire complete all as specified and directed by the Engineer in Charge. |
| 187 | Supply & fixing modular switches 6 Amps single pole one way, one module,ISI marked complete all as specified and directed by the Engineer in Charge. |
| 188 | Supply & fixing modular socketoutlet 6 Amp, 2/3 pin combined 2 module, 230 V AC ISI marked complete all as specified and directed by the Engineer in Charge. |
| 189 | Supply & fixing modular socketoutlet 6/16 Amp, 2/3 pin combined 2 module, 230 V AC ISI marked complete all as specified and directed by the Engineer in Charge. |
| 190 | Supply & fixing modular switches 16 Amps single pole one way, one module, ISI marked complete all as specified and directed by the Engineer in Charge. |
| 191 | Supply & fixing ceiling rose surface bakelite, white colour, 65 mm x 20mm, two to three terminals ISI (Marked) complete all as specified and directed by Engineer-in-Charge. |
| 192 | Supply & fixing LED tube light fitting 18 W complete all as specified and directed by Engineer-in-Charge. |
| 193 | Supply & fixing LED fixture 08 W including connection operated at AC 240 V complete all as specified and directed by Engineer-in-Charge. |
| 194 | Supply and fixing 300m sweep exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230 V, 50 Hz, 1200 RPM, copper winded complete all as specified and directed by the Engineer-in-Charge. |
| 195 | Material & labour for earthing complete with galvanised steel earth electrode 60cm x 60cm x 6 mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than1.5m below ground level connected to and including GI earth lead wire 4mm dia by meansof nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil, PCC (1:3:6) Type C1 in earth pit chamber, precast RCC cover50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GIprotection pipe, test point etc. complete all as specified and directed.Note:-The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI strip beyond 7.5 Metre shall be measured and paid for separately. |
| 196 | Supply and fixing factory made MCB distribution board SPN, 440 volts, 8 ways, degree of protection IP 43, double door fixed on wall with and including incoming MCB SPN \"C\" curve 40 A 16 KA - 01 No, and outgoing MCB SP \"C\" curve 06 to 32 A- 06 Nos, including necessary connections as required completeall as specified and directed by the Engineer-in-Charge. |
| 197 | Supply & fixing wall mounted fan 230 V single phase, heavy duty oscilating type, plastic body, 450 mm sweep suitable for wall mounting including all accessories for mounting etc complete all as specified & directed by the Engineer-in-Charge. |
| 198 | Supply & fixing modular white cover plate with frame 03 modular complete all as specified and directed by Engineer-in-Charge. |
| 199 | Supply & fixing modular white cover plate with frame 06 modular complete all as specified and directed by Engineer-in-Charge. |
| 200 | Supply, Laying, Testing and Commissioning of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables 16 Sqmm 02 core (heavy duty) 1100 Volts grade with stranded Aluminium conductor laid in trenches or fixed to wall/pol etc complete all as specified by Engineer-in-Charge. Note:- Earthwork, sand cushioning and stone patti etc. shall be measured and paid seperately. |
| 201 | Material & labour for sand cushioning for PVC cable with tibba sand (one layer of 80 mm thickness before laying of cable and other layer of 150 mm thickness after laying of cable) & punning down to 180 mm to providea required cover complete all as specified and directed by the Engineer-in-Charge.Note:- Punned thickness only shall be measured and paid. |
| 202 | Material & labour for Laying 40 to 50 mm thick rough dressed Jodhpur type stone slab cover 25 to 30cm wide and not less than 50 cm in length retreived from excavation, laid dry abutting each other for protection of cable complete all as specified and directed. |
| 203 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes Complete all as specified and directed by Engineer-in-Charge. |
| 204 | Supply and fixing factory made MCB distribution board TPN, 440 volts, 4 ways, degree of protection IP 43, double door fixed on wall with incoming MCB TPN \"C\" curve 63 A 10 KA - 01 No, and outgoing MCB SP \"C\" curve 06 to 32 A- 12 Nos, including necessary connections as required completeall as specified and directed by the Engineer-in-Charge. |
| 205 | Supply and fixing stepped type modular fan regulator 2 module ISI marked complete all as specified & directed by the Engineer-in-Charge. |
| 206 | Taking down old tube light/sketch/ bulk head any type for replacement/ refixing and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge. |
| 207 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified & directed by the Engineer-in-Charge. |
| 208 | Supply & fixing modular white cover plate with frame 08 modular complete all as specified and directed by Engineer-in-Charge. |
| 209 | Fixing, installation, testing & commisioning of 2 Ton Split AC (Outdoor unit & indoor unit both) with & includingPVC drainage pipe of required size & length for drainage of water,PVC connection cable and all necessary arrangement for fixing complete all as directed by the Engineer-in-Charge.Note:- (i) Split AC (Outdoor & Indoor unit) with all accessories as per OEM shall be issued by the MES free for fixing. (ii) Cost of copper tubing,beyond 3 metres if required at site shall be measured and paid separately under respective item.(iii) Drainage pipe beyond length supplyed by the OEM shall be measured and paid separately under respective item. |
| 210 | Fixing, installation, testing & commisioning of 1.5 Ton Split AC (Outdoor unit & indoor unit both) with & PVC drainage pipe of required size & length for drainage of water,PVC connection cable and all necessary arrangement for fixing complete all as directed by the Engineer-in-Charge.Note:- (i) Split AC (Outdoor & Indoor unit) with all accessories as per OEM shall be issued by the MES free for fixing. (ii) Cost of copper tubing,beyond 3 metres if required at site shall be measured and paid separately under respective item.(iii) Drainage pipe beyond length supplyed by the OEM shall be measured and paid separately under respective item. |
| 211 | Supply & fixing Voltage stabilizer for automatic operation, Single phase naturally oil cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy ± 2.5% and of capacity 5 KVA complete all as specified and directed by the Engineer-in-Charge. |
| 212 | Material & labour for dismantling/discennecting split type AC/window AC any capacity and make with all its accessories and deposit to MES store to the entire satisfaction of Engineer-in-charge complete all as specified and directed. |
| 213 | Supply & fixing flexible drain pipe (PVC braided hose pipe) of size 15 mm bore for split type AC any capacity complete all as specified and directed by the Engineer-in-Charge. |
| 214 | Supply & fixing in repairs sheet metal enclosure SPN with a two pin and earth plug socket complete with and including one number of 20 Amps MCB \"C\" curve single pole 240 Volt AC complete all as specified and directed by the Engineer-in-Charge. |
| 215 | Supply & fixing copper tube (ISI Marked)of size ?” dia for any capacity of split type AC complete all as specified & directed by the Engineer-in-Charge. |
| 216 | Supply & fixingcopper tube (ISI Marked)of size ¼” dia for any capacity of split type AC complete all as specified & directed by the Engineer-in-Charge. |
| 217 | Material & labour for fabrication of canopy stand for outdoor split type AC unit with and including angle iron 40 mm x 40 mm x 6 mm, with GI sheet on the top, including welding, cutting and installation at site complete allas specified & directed by the Engineer-in-Charge. |
| 218 | Dismantling of old angle iron stand/canopy of outdoor AC unit of any size, from site to the entire satisfaction of Engineer-in-chargecomplete all as specified and directed. |
| 219 | Material and labour in replacement for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 4 sqmm 1100 volt grade (ISI marked ) drawn through and including 25 mm bore external dia PVC conduit (minimum 1.8 mm thick) concealed in wall withnecessary fittings like bends, Tees, junction boxes fixed to wall or in ceilings, with one 2.5 Sqmm single core multi stranded copper conductor cableFRLS as earth continuity to common earth doly as earth wireall as specified and directed by the Engineer-in-Charge.Note :Two runs of main wire and one run of earth wire & one run of PVC conduit shall be measured and paid as one length. |
| 220 | Supply, installation, testing and commissioning ofconventinal type detectors complying with and multi sensor with heat and smoke combinaton, mounting base complete all as specified and directed by the Engineer-in-Charge. |
| 221 | Supply, installation, testing and commissioning of conventinal type remote response indicator for local identification of fire complete all as specified and directed by the Engineer-in-Charge. |
| 222 | Supply, installation, testing and commissioning of conventinal type analog manual call point pull station pull type, back plate complete all as specified and directed by the Engineer-in-Charge. |
| 223 | Supply, installation, testing and commissioning of conventinal type wall mounted sounder, control module if required complete all as specified & directed by the Engineer-in-Charge. |
| 224 | Supply, installation, testing and commissioning offault isolator for short/de-wired circuit, back plate complete all as specified & directed by the Engineer-in-Charge. |
| 225 | Supply, installation, testing and commissioning of FIRE ALARM PANEL ( CRCA sheet powder coated IP-54 ) conventianal type , 02 zone, suitable for automatic fire detection and alarm systemwith and includingtwo Nos 12V, 7AH battery complete all as specified & directed by the Engineer-in-Charge. |
| 226 | Supply & fixing 25mm bore, MS conduit pipe, with all fittings and required accessories like joint, bends, clamps, junction boxes etc & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 227 | Supply, Laying, Testing and Commissioning of FRLS cable PVC insulated multi stranded copper conductor of size 1.5 Sqmm 2 core fixed on wall or ceiling complete all as specified by Engineer-in-Charge. |
| 228 | Supply & fixing air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed by the Engineer in Charge. |
| 229 | Material & labour for aluminium strip 25mm x 3.15mm complete with, protection sleeves, saddles, seperator and fixing screws for roof conductors and down conductors complete all as specified and directed by the Engineer-in-Charge. |
| 230 | Material & labourGI strip 32mm x 6mm complete with, protection sleeves, saddles, seperator and fixing screws at surrounding, inside and outsidethe building complete all as specified and directed by the Engineer-in-Charge. |
| 231 | Material & labourcopper strip 20mm x 3mm complete with, protection sleeves, saddles, seperator and fixing screws at surrounding, inside and outsidethe building complete all as specified and directed by the Engineer-in-Charge. |
| 232 | Supply, fixing, testing and commissioning of isolation Transformer 5 KVA, 1 Phase 50 HZ, Air cooled copper wound indoor type, class of insulation A, metallic body duly powder coated, designed for input voltage range 240 +/- 5% and output voltage range 240 +/- 5%, ratio 1:1, efficiency more than 95%, potential difference between netural to earth less than one volt with standard fittings including connection with instrument by PVC insulated copper conductor cable of required size and length complete all as specfied and directed by the Engineer-in-Charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
