Military Engineer Services-MES has published Addition / Alteration Of Dsc Billets, Stand By Ops Room And Old Clothing Store With Misc Works Of Certain Units At Af Station Jodhpur Under Ge Af Jodhpur. Submission Date for this Tender is 09-02-2022. Railway Ancillaries Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Jan-2022 | AMENDMENT_1 | BOQ | 02-02-2022 |
| 2 | 02-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-02-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/above ground level) including floor finishes complete all as specified & directed by the Engineer-in-Charge. |
| 2 | Material and Labour for cutting opening through stone walls/brickwall/RCC built in cement mortor for door, windows and other openings or enlarging existing openings, converting window into door opening etc or cutting out defective masonry for under pinning including providing fixing and removing, shoring , cleaning, stacking stone and removing surplus serviceable bricks/stone to store and rubbish not exceeding 50 m complete all as specified and directed by Engineer-in-charge. |
| 3 | Material & labour for forming jambs, etc. in cement mortar 1:6, to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by the Engineer-in-Charge. |
| 5 | Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by the Engineer-in-Charge. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)not exceeding 1.5 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge. |
| 8 | Supply & fixing Aluminium Anodized approved colour powder coated (Thickness of powder coating not less than 50 micron) aluminium frame for doors , windows, ventilators, partition wallwith one or more rebates or aluminium section of two or more tracks incase sliding windows including joining cleat for fixing etccomplete all as specified & directed by the Engineer-in-Charge. |
| 9 | Supply & fixing anodised aluminium window and ventilator shutters,powder coated of approved colour (Thickness of powder coating not less than 50 micron), window and ventilator shutter fixed type without sash bar, aluminium sections weighing 0.55kg/m including necessary fittings like joining cleat, glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , aluminium handles 02 Nos of required size in each leaf, stainless steel hinges, tower bolts 02 Nos in each leaf complete all as specified & directed by the Engineer-in-Charge. |
| 10 | Supply & fixing anodised aluminium door sliding type shutters, approved colour powder coated (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, stainles steel hinges, tower bolts two Nos in each leaf, anodised aluminum snap beading screws etc.complete all as specified & directed by the Engineer-in-Charge. |
| 11 | Material & labour for sheet glass ordinary quality 5.5 mm thick fitted with beading/putty, in squares exceeding 0.5 sqm in each pane complete all as specified & directed by the Engineer-in-Charge. |
| 12 | Material & labour for sheet glass ordinary quality 4 mm thick and glazing with oil putty, in squares not exceeding 0.5 sqm in each pane complete all as specified & directed by the Engineer-in-Charge. |
| 13 | Supply and fixing 7mm thick aluminium grill of make " Deco grillDG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and as directed by Engr-in-Charge . |
| 14 | Supply & fixing 18 mm thick solid PVC ply of 1st quality both side white colour fixed with screws, solvent cement / adhesive to making of furniture, wall panelling, kitchen cabinate and cupboard shutters complete all as specified & directed by the Engineer-in-Charge. |
| 15 | Supply & fixing mild steel Continuous (piano) hinges, brass type, Width of flaps (when open) not less than 40mm,complete all as specified & directed by the Engineer-in-Charge. |
| 16 | Supply & fixing cast brass fanlight catch with 14mm catch and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 17 | Supply and fixing brass mortice lock, 04 levers, vertical type, of size 100 mm complete all as specified and as directed by Engr-in-Charge . |
| 18 | Supply and fixing brass handles, cast type, polished bright, size 100 mm complete all as specified and as directed by Engr-in-Charge . |
| 19 | Supply and fixing 250mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 20 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified & directed by the Engineer-in-Charge. |
| 21 | Material and labour for Gl frame work for seamless ceiling size of grid 605 mm x 605 mm comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed by the Engineer-in-Charge. |
| 22 | Material and labour for 12 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified & directed by the Engineer-in-Charge. Note:- Frame work for ceiling shall be measured and paid separately. |
| 23 | Material & labour for preparing surfaces ofnewly plastered or unplastered surfaces of ceilings and applying two coats of oil emulsion distemperover a coat of alakali resistant primeron walls complete all as specified & directed by the Engineer-in-Charge. |
| 24 | Taking downcement or cement lime plaster work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc, complete all as specified & directed by the Engineer-in-Charge. |
| 25 | Dismantling, floor, hearth or wall tiling /terrazo including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed by the Engineer-in-Charge. |
| 26 | Material & labour for light shade, double charged Non-skid Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm as in floors etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick screed bed or bedding layer in cement mortar (1:4) etc, complete all as specified & directed by the Engineer-in-Charge. |
| 27 | Material & labour for light shade, double charged Non-skid Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm as in vertical surfaces etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 10 mm thick rendering in cement mortar (1:4) on stone masonry surfaces or surface other than fair faces of brick worketc, complete all as specified & directed by the Engineer-in-Charge. |
| 28 | Material & labour for 15 mm thick rendering in cement mortar 1:6 on stone masonary surface or surface other than fair face of brick work of walls including surface finished fair end even complete all as specified & directed by the Engineer-in-Charge. |
| 29 | Material & labour for 15 mm thick rendering in cement mortar 1:4 on stone masonary surface or surface other than fair face of brick work of walls including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 30 | Material & labour for preparation of new plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying 2 mm thick white cement base wall care putty and applyingtwo coats of oil emulsion distemper, white or tinted including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Material & labour for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying white cement base wall care putty in patches as required and applyingone coat of oil emulsion distemper, white or tinted including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Material & labour for preparation of newly plastered or unplastered surface of walls and applying two coats of cement based paint including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | Material & labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation, sub base, filling and mass concrete and post holes complete all as specified & directed by the Engineer-in-Charge. |
| 35 | Material & labour for Rolled sections Fe 410 -W (Grade E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified & directed by the Engineer-in-Charge. |
| 36 | Material & labour for Chequered cement concrete tiles bull nosed 30cm x 30cm x 25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors/treads complete all as specified & directed by the Engineer-in-Charge. |
| 37 | Excavating in post holes (or similar holes) in soft/loose soil, each not exceeding 0.5 cubic metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering complete all as specified and directed by the Engineer-in-Charge. |
| 38 | Material & labour for cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregates) as in post holes, foundation, filling and mass concrete complete all as specified & directed by the Engineer-in-Charge |
| 39 | Material & labour for preparation of new steel surface of any description over 10 cm width and girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified & directed by the Engineer-in-Charge. |
| 40 | Material & labour for 20mm thick Granite work (of any type) machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms etcset, bedded in 20 mm thick cementmortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ofgranite complete all as specified & directed by the Engineer-in-Charge. |
| 41 | Material & labour for dubbing out average 10mm thick on irregular face of walls on fair faces of brickwork or concrete surfaces in cement mortar 1:4 complete all as specified & directed by the Engineer-in-Charge. |
| 42 | Material & labour PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, benching etc complete all as specified and directed by the Engineer-in-Charge. |
| 43 | Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified & directed by the Engineer-in-Charge. |
| 44 | Taking downold Tarfeltofexiting water proofing treatmenton RCC roof surfaces including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including removing debris out site of MD landcomplete all as specified & directed by the Engineer-in-Charge. |
| 45 | Material & labour for 25mm thick PCC 1:2:4 type B0(using 12.5mm graded stone aggregate) as in levelling course/ roof padding mixed with & including water proofing compound @ 3% by weight of cement , surfaces finished even and fair on roof / chajjas etc complete all as specified & directed by the Engineer-in-Charge. |
| 46 | Material & labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 with and including water proofing compound as per manufacturer"s instruction complete all as specified & directed by the Engineer-in-Charge. |
| 47 | Material and labour for cutting grooves in stone/brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3complete all as specified & directed by the Engineer-in-Charge. |
| 48 | Material and labour for preparation of concrete surfaces and applyingbituminous primer (conforming to IS : 3384-1965 ) @ 0.40 Kg/Sqm complete all as specified & directed by the Engineer-in-Charge. |
| 49 | Material & labour for applying evenly a tack coat of industrial bitumen of grade 85/25@ 1.2 kg per sqm including cleaning surfaces( Ist coat for bonding materialbelowmembrane and IInd coaton top of membrane) complete all as specified & directed by the Engineer-in-Charge. Note:- Each coat shall be measured and paid seperately. |
| 50 | Supply and laying Atactic polypropylene modified polymeric standard membrane of minimum 3 mm thickness, weight not less than 3kg/sqm, reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application and finally finished with aluminium paint @ 0.20 litre per sqm complete all as specified & directed by the Engineer-in-Charge. |
| 51 | Material & labour for 15 mm thick rendering in Cement Mortar 1:4 mixed with & includingwater proofing compound @ 3% by weight of cement, on concrete surfaces while concrete surface is green on roof, finishing even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 52 | Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 15 mm bore pipe complete all as specified & directed by the Engineer-in-Charge. |
| 53 | Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 20 mm bore pipe complete all as specified & directed by the Engineer-in-Charge. |
| 54 | Dismantlingold unserviceable water storage tank (PVC/RCC/AC) of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified & directed by the Engineer-in-Charge. |
| 55 | Supply & fixing 15mm bore, medium grade, galvanised iron pipe, with all fittings & fixed to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 56 | Supply & fixing 20mm bore, medium grade, galvanised iron pipe, with all fittings & fixed to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 57 | Supply & fixing rotational moulded polyethylene water storage tank of capacity 500 Litres (Cylindrical vertical with closed top), double layer construction, ISI marked hoisted & fixed in position including GI light grade 20mm dia over flow pipe 450mm long and waste pipe 600mm long with all fitting etc.etc complete all as specified & directed by the Engineer-in-Charge. |
| 58 | Material & labour for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) polished, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over & including 15 mm thick screed bed or bedding layer in cement mortar (1:4) etc, complete all as specified & directed by the Engineer-in-Charge. |
| 59 | Material & labour for glazed ceramic coloured tiles of approved design pattern of size 450mm x 350mm x 7 mm / 600mm x 300mm x 7mm, in vertical surface as in dado, set andjointedin neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles, laid over and including 10 mm thick rendering in cement mortar 1:4 on stone masonry surface or surface other than fair faces of brick work complete all as specified and as directed by the Engineer - in - Charge. |
| 60 | Material & labour for 25mm thick PCC 1:2:4 type B1(using 20 mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge. |
| 61 | Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels not exceeding 3 metres long and joints shall be filled with the mixture of bitumen and sand in proportion (1:3) by weight, complete all as specified & directed by the Engineer-in-Charge. |
| 62 | Material & labour for squared rubble walling, Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge. |
| 63 | Material & labour for squared rubble walling (except stone), Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge. |
| 64 | Material & labour for 10 mm thick rendering in cement mortar 1:4 on on fair faces of brickwork or concrete surfaces on ceiling including surface finished even and smooth without using extra cement complete all as specified & directed by the Engineer-in-Charge. |
| 65 | Material & labour for preparation of new plastered or unplastered surfaces of ceilings and applying two coats of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Material & labour for preparation of old decorated plastered or unplastered surfaces of ceilings and applying one coat of white lime wash including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 67 | Material & labour for preparation of old painted surface of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of cement based paint, including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Taking down shutters exceeding 1 Sqm but not exceeding2 Sqm each complete all as specified & directed by the Engineer-in-Charge. |
| 69 | Supply & fixing anodised aluminium door shutters, approved colour powder coated (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, stainles steel hinges, tower bolts two Nos in eac leaf, anodised aluminum snap beading screws etc.complete all as specified & directed by the Engineer-in-Charge. |
| 70 | Material & labour for framed workFe-290 (Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hingeswelding complete all as specified & directed by the Engineer-in-Charge. |
| 71 | Supply & fixing Flush shutters, 40mm thick solid core construction, with particle board core and plywood face panels, covered with 1.5 mm thick decorative lamination on both sides complete all as specified & directed by the Engineer-in-Charge. |
| 72 | Supply & fixing 35 mm thick second class hord wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifiedd & directed by the Engineer-in-Charge. |
| 73 | Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube fixed with 75mm long MS screws with PVC fasteners to wall allincluding repair of james of wall & finishes complete allas specified and directed . |
| 74 | Supply & fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete as per specification & drawing complete allas specified and directed . |
| 75 | Supply & fixing mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ; framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts etc similar work confirming to Fe.290 grade E-265 complete all as specified & directed by the Engineer-in-Charge. |
| 76 | Supply & fixing butt hinges medium weight, cold rolled mild steel, of size 125mm long complete all as specified & directed by the Engineer-in-Charge. |
| 77 | Supply & fixing Mild steel barrel tower bolts 150 mm long, stove enamelled black, with bright bolt and fixed complete all as specified & directed by the Engineer-in-Charge. |
| 78 | Supply & fixing Mild steel pressed handles 150 mm long, oval type, stove enamelled black complete all as specified & directed by the Engineer-in-Charge. |
| 79 | Supply & fixing floor door stopper of brass body and tongue ,anodised with hard drawn steel spring over all length of cover plate 150 mm complete all as specified & directed by the Engineer-in-Charge. |
| 80 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames complete all as specified & directed by the Engineer-in-Charge. |
| 81 | Supply & fixing in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed by the Engineer-in-Charge. |
| 82 | Supply & fixing 12 mm solid PVC ply of 1st quality of one side prelaminated of approved colour and one side with white colour fixed with screw, solvent cement/adhessive as in Cup boards/kitchen racks box /Kitchen cup boards complete all as specified and directed by Engineer-in-charge. |
| 83 | Supply & fixing Magnet catchfor kitchen cabinet shutters as per approvedsample complete all as specified & directed by the Engineer-in-Charge. |
| 84 | Dismantling Wallandceilingboards(fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, removal of debris outside premises complete all as specified & directed by the Engineer-in-Charge. |
| 85 | Material & labour for anodised aluminium snap grid frame work for false of grid size 605 mm x 605 mm with aluminium "T" sections of size 38 x 25 x 1.5mm for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.5 mm thick along the walls suspended with and including 4 mm dia galvanised mild steel wirecomplete all as specified & directed by the Engineer-in-Charge. |
| 86 | Material & labour for 12 mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60 cm x 60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified & directed by the Engineer-in-Charge. |
| 87 | Surface excavation not exceeding 30cm deep and averaging 15cm deep in soft/loose soil and getting out complete all as specified & directed by the Engineer-in-Charge. |
| 88 | Material & labour for Sand filling under floors, spreading and levelling in layers not exceeding 25 cm thick including watering and consolidation, well ramming in layersas required complete all as specified & directed by the Engineer-in-Charge. |
| 89 | Material & labour for 60mm thick,Machine pressed precast concrete , Rubber mouldedinterlocking paver blocks confirming to IS 15658-2006 made ofM-35 Grade, with grey cement and pigment, laid dry as in floor, pathway, shape and colour as directed, complete all as specified & directed by the Engineer-in-Charge. |
| 90 | Material & labour for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width and girth by filling coat with grey filler or liquid wool filler transparent and bringing forward surfaces to smooth even finish and applying two coats of synthetic enamel paint over a coatof pink primerincludingcomplete all as specified & directed by the Engineer-in-Charge. |
| 91 | Refixing of 15mm bore old steel tubing & connection in new or old position (walls ceilings floors etc) complete all as specified & directed by the Engineer-in-Charge. Note:- Old unserviceable GI tubing obtained from dismantling under respective item hereinabove shall be used under this item. |
| 92 | Refixing of 20mm bore old steel tubing & connection in new or old position (walls ceilings floors etc) complete all as specified & directed by the Engineer-in-Charge. Note:- Old unserviceable GI tubing obtained from dismantling under respective item hereinabove shall be used under this item. |
| 93 | Supply & fixing rotational moulded polyethylene water storage tank of capacity 1000 Litres (Cylindrical vertical with closed top), double layer construction, ISI marked hoisted & fixed in position including GI light grade 20mm dia over flow pipe 450mm long and waste pipe 600mm long with all fitting etc.including taking down old unserviceable tank complete all as specified & directed by the Engineer-in-Charge. |
| 94 | Supply and fixing in repairs 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (weight not less than 210 gms) complete all as specified and directed. |
| 95 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 96 | Supply and fixing in repairs 15 mm dia stop valves,fancy type, chromium plated, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 97 | Supply & fixing in repairs Bib taps, chromium plated, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 98 | Supply & fixing in repairs Bib taps, fancy type, chromium plated, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 99 | Supply & fixing in repairs two way bib cock, fancy type, brass chromium plated, 15 mm borecomplete all as specified and as directed by the Engineer-in-Charge. |
| 100 | Supply and fixing in repairs 15 mm bore fancy type brass chromium plated Wall mixer with pipe bend screwed downcomplete all as specified and directed. |
| 101 | Supply and fixing in repairs 15 mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down of size 200mmx200mm complete all as specified and directed. |
| 102 | Supply and fixingin repairs EWC seat cover PVC white colour including all fitting arrangements complete all as specified and directed. |
| 103 | Supply and fixingin repairs Soap dish, vitreous China white, approximate size 160 x 160 x 90mm complete all as specified and directed. |
| 104 | Supply and fixing in repairs PVC (PTMT alloy) bath room cabinet with mirror of size 450mm x 350mm complete all as specified and directed by the Engineer-in-Charge. |
| 105 | Supply and fixing in repairs coloured powder coated aluminium drapery rod in any length, 25 mm inner dia, supported with coloured powder coated aluminium decorative type design and pattern as approved including decorative brackets both ends complete all as specified and as directed by the Engineer - in - Charge |
| 106 | Supply & fixing in repairs Pillar taps fancy type, brass chromium plated, 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and as directed by the Engineer - in - Charge |
| 107 | Supply & fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white and trap including connection to drain flush pipe and anti-syphonage type complete all as specified and as directed by the Engineer - in - Charge |
| 108 | Supply & fixing in repairs PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with intlet, ball valve, float & handle including brackets complete all as specified and as directed by the Engineer - in - Charge |
| 109 | Supply & fixing in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed by the Engineer - in - Charge. |
| 110 | Supply & fixing in repairs600mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 4 to 5 mm thick PVCboard packing and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 111 | Supply and fixing in repairs CP waste coupling 32 mm dia with long shank andfly nuts etc for wash basinscomplete all as specified and directed. |
| 112 | Supply and fixing in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 113 | Taking down CI/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed. Note:-Measurement shall be taken overall as fixed along the centre line over fittings and accessories. |
| 114 | Supply & fixing PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 115 | Supply & fixingPVC (SWR) bend any radius of 110mm bore complete all as specified & directed by the Engineer-in-Charge. |
| 116 | Supply & fixing PVC (SWR) branch piece of bore 110 mm dia, single (single Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 117 | Supply & fixing PVC (SWR) junction of bore 110 mm dia, single (single T) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 118 | Supply & fixing PVC (SWR) coupler of bore 110 mm dia complete all as specified & directed by the Engineer-in-Charge. |
| 119 | Supply & fixing PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 120 | Supply & fixingPVC (SWR) bend any radius of75 mm bore complete all as specified & directed by the Engineer-in-Charge. |
| 121 | Supply & fixing PVC (SWR) branch piece of bore 75 mm dia, single (single Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. |
| 122 | Supply & fixing PVC (SWR) coupler of bore 110 mm dia complete all as specified & directed by the Engineer-in-Charge. |
| 123 | Supply & fixing PVC (SWR) floor trap of 75 mm dia outlet, plain with grating including jointing with solvent cement complete all as specified & directed by the Engineer-in-Charge. |
| 124 | Supply & fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed by the Engineer-in-Charge. |
| 125 | Supply and fixing in repairs brass chromium plated grating of size 100 mm dia (Minimum weight 25gms)complete all as specified and directed. |
| 126 | Supply and fixing in repairs tublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed by the Engineer-in-charge. |
| 127 | Supply & fixing in repairs MS powder coated peg sets of 3 Nos peg set of good quality, complete all as specified and directed. |
| 128 | Excavation in trenches in soft/loose soil, not exceeding 1.5m wide and not exceeding 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 129 | Excavation in trenches in soft/loose soil, not exceeding 1.5m wide and exceeding 1.5 in depth but not exceeding 3.00 deep, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 130 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed by the Engineer-in-Charge. |
| 131 | Removing excavated soil exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge. |
| 132 | Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed by the Engineer-in-Charge. |
| 133 | Material & labour for Reinforced concrete pipes 150mm dia, class NP2, laid & jointed complete with collars, in trenches complete all as specified and directed by the Engineer-in-Charge. |
| 134 | Material & labour for construction of soakage well of size 3.0 m x 3.0 m in soft/loose soil complete all as per Drawing No CEAA/TD/80 sheet 1/2 and 2/2 complete all as specified and directed by the Engineer-in-Charge. |
| 135 | Material & labour for precast Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slabs for manhole etc with plain faces complete all as specified and directed by the Engineer-in-Charge.Note :- Renforvement shall be measured and paid separately. |
| 136 | Material and labour for Mild steel TMT bars 6 to 8 mm diaas in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete all as specified & directed by the Engineer-in-Charge. |
| 137 | Taking down carefully copper/aluminium point wiring light, fan, socket or power complete, such as switches, ceiling roses,pendents, regulators, sockets etc. removing materials to store for keeping in safe costudy or for taking credit and making good disturbed surface of walls, floors etc.Complete all as specified and directed by Engineer-in-Charge. |
| 138 | Material & labour for point wiring for One light / fan point controlled by one switch5 Amp, SP, one way240 volts, with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and including 20mm dia medium grade rigid PVC conduit (ISI marked) (thickness not less than 1.8 mm) concealed in wall, with all accessories including pressed steel terminal sunken boxes suitable for modular fittings including 1.5 sqmm size PVC insulated unsheathed FRLS copper conductor multistranded cable for continuous earth conductor to common earth and connecting to earth dolly, including making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour complete all as specified & directed by Engineer-in-Charge. |
| 139 | All as per Item Ser No 138.00 here-in-before but for 5 amp socket on same board. |
| 140 | All as per Item Ser No 138.00 here-in-before but for 5 amp socket on independent board. |
| 141 | All as per item No. 138.00 here-in-before but with 4 Sqmm FRLS copper cable for independent 15 Amps socket outlet and including 2.5 Sqmm PVC insulated copper conductor unsheathed 1100 Volt grade IS-694 FRLS cable for continous earth wire complete all as specified and directed by the Engineer in Charge. |
| 142 | Supply & fixing modular switches 5 Amps single pole one way ISI marked complete all as specified and directed by the Engineer in Charge. |
| 143 | Supply & fixing modular socketoutlet 6 Amp, 2/3 pin combined 2 module, 230 V, AC, ISI marked complete all as specified and directed by the Engineer in Charge. |
| 144 | Supply & fixing modular socketoutlet 6/16 Amp, 2/3 pin combined 2 module, 230 V, AC, ISI marked complete all as specified and directed by the Engineer in Charge. |
| 145 | Supply & fixing modular switches 16 Amps single pole one way ISI marked complete all as specified and directed by the Engineer in Charge. |
| 146 | Supply & fixing ceiling rose surface bakelite, white colour, 65 mm x 20mm, two to three terminals ISI (Marked) complete all as specified and directed by Engineer-in-Charge. |
| 147 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes Complete all as specified and directed by Engineer-in-Charge. |
| 148 | Taking down old tube light/sketch/ bulk head any type for replacement/ refixing and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr-in-Charge . |
| 150 | Supply & fixing wall mounted fan plastic blade 230 V single phase, heavy duty oscilating, 450 mm sweep suitable for wall mounting including all accessories for mounting etc complete all as specified & directed by the Engineer-in-Charge. |
| 151 | Supply and fixing ceiling fans complete with blades, down rods, modular regulator and accessories, 230 V, 1200 mm sweep, BEE. Five star rated complete all as specified & directed by the Engineer-in-Charge. |
| 152 | Material & labour for earthing complete with galvanised steel earth electrode 60cm x 60cm x 6 mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than1.5m below ground level connected to and including GI earth lead wire 4mm dia by meansof nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil, PCC (1:3:6) Type C1 in earth pit chamber, precast RCC cover50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GIprotection pipe, test point etc. complete all as specified and directed. Note:-The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI strip beyond 7.5 Metre shall be measured and paid for separately. |
| 153 | Supply and fixing factory made MCB distribution board SPN, 440 volts, 8 ways, degree of protection IP 43, double door fixed on wall with and including incoming MCB SPN "C" curve 40 A 16 KA - 01 No, and outgoing MCB SP "C" curve 06 to 32 A- 06 Nos, including necessary connections as required completeall as specified and directed by the Engineer in Charge. |
| 154 | Supply and fixing desert cooler steel body made of 22 guage GI sheet, electric driven (single phase) including heavy duty fan, water pump, wooden pads etc having nominal air flow capacity of 5000 cum per hour or nearest and minimum tank capacity 25 litres complete all as specified and as directed by Engr-in-Charge . |
| 155 | Material & labour for desert cooler stand of angle iron 40 mm x 40 mm x 6 mm, minimum weight of stand 20 kilogram, fabricated and fixedas specified & directed by the Engineer-in-Charge. |
| 156 | Supply & fixing modular white cover plate with frame 03 modular complete all as specified and directed by Engineer-in-Charge. |
| 157 | Supply & fixing modular white cover plate with frame 08 modular complete all as specified and directed by Engineer-in-Charge. |
| 158 | Supply, installation, testing and commissioning of detectors complying with and multi sensor with heat and smoke combinaton, mounting base complete all as specified and directed by the Engineer-in-Charge. |
| 159 | Supply, installation, testing and commissioning of remote response indicator for local identification of fire complete all as specified and directed by the Engineer-in-Charge. |
| 160 | Supply, installation, testing and commissioning of explosive proof manual call point (Add up control module)complete all as specified and directed by the Engineer-in-Charge. |
| 161 | Supply, installation, testing and commissioning of wall mounted Loop powerd sounder strobe complete all as specified & directed by the Engineer-in-Charge. |
| 162 | Supply, installation, testing and commissioning of fault isolator for short/de-wired circuit, back plate complete all as specified & directed by the Engineer-in-Charge. |
| 163 | Supply, installation, testing and commissioning of FIRE ALARM PANEL non addressable type, 02 zone, suitable for automatic fire detection and alarm system complete all as specified & directed by the Engineer-in-Charge. |
| 164 | Supply & fixing 25mm bore, light grade, galvanised iron conduit pipe, with all fittings and required accessories & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 165 | Supply, Laying, Testing and Commissioning of FRLS cable PVC insulated multi stranded copper conductor of size 1.5 Sqmm 2 core fixed on wall or ceiling complete all as specified by Engineer-in-Charge. |
| 166 | Material & labour for bore earthing in Hard Rock by DTH boring machine, 150 mm dia buried by vertical boring machine, depth 100 mtr below ground level using earth electrode 50mm dia GI pipe medium grade duly drilled hole of 12mm dia ,15cm C/C on both side of the pipe including lowering in bore well upto the depth of 99mtr and one metre above the ground level . The pipe electrode should be filled around commercial salt, charcoal dust , copper sulphate and magnisium phosphate of 30 cm layer each upto the full length of pipe. The bore well should have 12 metre of length 150mm dia MS pipe for protection of bore well. Welding of GI strip 50x6 mm on earth electrode GI pipe 50mm dia upto the 10 metre below ground level and 15 metre from the bore well to test point gun metal and PCC foundation sorrounding the bore well 60x60x30 cm, necessary water connection by GI steel tubing 15 mm dia complete all as specified and directed. Note :- If GI strip required more than 25 metres , then length exceeding 25 metres shall be measured and paid separately. |
| 167 | Material & labourcopper strip 20mm x 3mm complete with, protection sleeves, saddles, seperator and fixing screws at surrounding, inside and outsidethe building complete all as specified and directed by the Engineer-in-Charge. |
| 168 | Material & labour for bore earthing in any type of soil,150 mm dia buried by DTH boring machine, depth 50 mtr below ground level using earth electrode 50mm dia GI pipe medium grade duly drilled hole of 12mm dia ,15cm C/C on both side of the pipe including lowering in bore well upto the depth of 49mtr and one metre above the ground level . The pipe electrode should be filled around commercial salt, charcoal dust , copper sulphate and magnisium phosphate of 30 cm layer each upto the full length of pipe. The bore well should have 12 metre of length 150mm dia MS pipe for protection of bore well. Welding of GI strip 50x6 mm on earth electrode GI pipe 50mm dia upto the 10 metre below ground level and 15 metre from the bore well to test point gun metal and PCC foundation sorrounding the bore well 60x60x30 cm, necessary water connection by GI steel tubing 15 mm dia complete all as specified and directed. Note :- If GI strip required more than 25 metres , then length exceeding 25 metres shall be measured and paid separately. |
| 169 | Supply & fixing porcelain, vitreous, white, brown or green insulator on walls, roofs etc complete all as specified and directed by the Engineer-in-Charge. |
| 170 | Supply, installation, testing and commissioning of inverter (variable speed) hi wall split AC units of capacity 02 TR with 5 star rating, 230 V AC, 50 c/s AC suply, indoor/outdoor complete with cordless remote control unit and with inbuilt air ioniser and Plasma filter for better indoor air quality complete with cordlesscomplete all as specified & directed by the Engineer-in-Charge. |
| 171 | Material and labour for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 6 sqmm 1100 volt grade (ISI marked ) drawn through and including 25 mm bore PVC conduit withnecessary fittings,with one 4 Sqmm single core multi stranded copper conductor cableFRLS as earth continuity to common earth doly as earth wireall as specified and directed by the Engineer in Charge. Note :Two runs of main wire and one run of earth wire & one run of PVC conduit shall be measured and paid as one length. |
| 172 | Supply & fixing sheet metal enclosure SPN with a two pin and earth plug socket complete with and including one number of 32 Amps MCB "C" curve single pole 240 Volt AC complete all as specified and directed by the Engineer in Charge |
| 173 | Supply & fixing Voltage stabilizer for automatic operation, Single phase naturally oil cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy ± 2.5% and of capacity 5 KVA complete all as specified and directed by the Engineer-in-Charge. |
| 174 | Material & labour for fabrication of canopy with frame made out ofangle iron 40 mm x 40 mm x 6 mm, 1.6 mm thick MS sheet for protection of condensing unit ( weight of canopy including angle iron and MS sheet should not be less than 30 Kg) fabricated and fixedas specified & directed by the Engineer-in-Charge including painting with two coats of synthetic enamel paint over one coat of red oxide primer. |
| 175 | Supply and fixing factory made MCB distribution board TPN, 440 volts, 4 ways, degree of protection IP 43, double door fixed on wall with incoming MCB TPN "C" curve 63 A 10 KA - 01 No, and outgoing MCB SP "C" curve 06 to 32 A- 12 Nos, including necessary connections as required completeall as specified and directed by the Engineer in Charge. |
| 176 | Supply and fixing stepped type modular fan regulator 2 module ISI marked complete all as specified & directed by the Engineer-in-Charge.. |
| 177 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete all as specified & directed by the Engineer-in-Charge.. |
| 178 | Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by the Engineer-in-Charge. |
| 179 | Material and labour in replacement for submain wiring with two single core PVC insulated multi stranded copper conductor cable FRLS of size 6 sqmm 1100 volt grade (ISI marked ) drawn through and including 25 mm vore PVC conduit withnecessary fittings,with one 4 Sqmm single core multi stranded copper conductor cableFRLS as earth continuity to common earth doly as earth wireall as specified and directed by the Engineer in Charge. Note :Two runs of main wire and one run of earth wire & one run of PVC conduit shall be measured and paid as one length. |
| 180 | Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified & directed by the Engineer-in-Charge. |
| 181 | Supply and fixing Gun-metal, globe or gate valves of 15mm bore with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
