}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 30670767

    • Supply Of Screw Clamp & Plate Screwscrew Clamp & Plate Screw,Manufacture And Supply Of Screw Clamp For Points & Crossing For 60 Kg Rail Confirming To Is 2062. The Clamp Shall Be Light Weight Accompanied With Pad Lock For Locking Arrangement With Ir Mentio-Nagaland

    Northeast Frontier Railway has published Supply Of Screw Clamp & Plate Screwscrew Clamp & Plate Screw,Manufacture And Supply Of Screw Clamp For Points & Crossing For 60 Kg Rail Confirming To Is 2062. The Clamp Shall Be Light Weight Accompanied With Pad Lock For Locking Arrangement With Ir Mentio. Submission Date for this Tender is 24-01-2022. Railway Ancillaries Tenders in Nagaland. Bidders can get complete Tender details and download the document.




    Tender Notice

    30670767
    Supply Of Screw Clamp & Plate Screwscrew Clamp & Plate Screw,Manufacture And Supply Of Screw Clamp For Points & Crossing For 60 Kg Rail Confirming To Is 2062. The Clamp Shall Be Light Weight Accompanied With Pad Lock For Locking Arrangement With Ir Mentio
    Tender
    Indian
    Nagaland
    24-01-2022

    Tender Details

    Supply Of Screw Clamp & Plate Screwscrew Clamp & Plate Screw,Manufacture And Supply Of Screw Clamp For Points & Crossing For 60 Kg Rail Confirming To Is 2062. The Clamp Shall Be Light Weight Accompanied With Pad Lock For Locking Arrangement With Ir Mentioned On Each Locks. Note:-Material Should Strictly Comply To The Given Specifications. In Case Of Any Deviations, The Materials May Be Rejected On Suppliers%U2019 Own Risk And Cost. , Manufacture And Supply Of Plate Screw Of (For Use With Dowel) Conforming To Irs Specification No. 16- 81 Drg No. T-3912 With Latest Amendment If Any. The Screws Shall Be Manufactured From Steel Conforming To Grade Designation E 250 Quality A As Laid Down In Table 1 & Table 2 Of Is: 2062- 2011 %U201chot Rolled Medium And High Tensile Structural Steel-Specification%U201d. The Screws Shall Be Supplied In Galvanized Condition Only. Galvanizing Shall Be Carried Out As Per Is: 2629- 85 %U201crecommended Practice For Hot Dip Galvanizing Of Iron And Steel%U201d. The Coating Of The Galvanized Screws Shall Conform To The Requirements Of Testing And Inspecting Stipulated At Clause 6.1, 6.2, 6.3 And 6.4.2 Of Is: 2629- 85 And Minimum Average Weight Of Coating Shall Be 300 G/M2 .The Galvanized Coating Of Any Screw Found Not In Conformity With The Requirement Of Clause 2.2.1 Shall Be Rejected.- The Screws Shall Be Manufactured From A Single Piece, Without Welding. The Head Shall Be Formed By Upsetting The Bar When Hot. The Head Shall Be Concentric And Square With The Shank, Within A Tolerance Of 0.8Mm And 1.20Mm Respectively And Shall Not Show Any Defect After Having Been Finished. The Threads Which May Be Hot Rolled Shall Be Regular And The End Of The Shank Sheared And Machine-Finished. General Requirements Relating To The Supply Of Screws Shall Conform To Is: 1387- 93 %U201cgeneral Requirements For The Supply Of Metallurgical Materials.%U201dthe Dimensions Of Galvanized Screws Shall Conform To The Dimensions And Tolerances Shown On The Drawing(S) To

    Key Value

    Document Fees
    Refer document
    EMD
    Refer document
    Tender Value
    Refer document
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail