Military Engineer Services-MES has published Addn / Altn To L/In Billets Of Sncos And Provision Of Gate , Chain Link Fencing And Misc B/R Works Services For Building No P-581 In Technical Area At Af Stn Jodhpur. Submission Date for this Tender is 18-03-2021. Railway Ancillaries Tenders in GE (AF) Jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Mar-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-03-2021 |
| Name of Work : ADDN / ALTN TO L/IN BILLETS OF SNCOs AND PROVN OF GATE, CHAIN LINK FENCING AND MISC B/R WORKS SERVICES FOR BUILDING NO P-581 IN TECHNICAL AREA AT AF STN JODHPUR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling, floor, hearth or wall tiling /terrazo including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed by the Engineer-in-Charge. | 90 | Square Metre | |
| 2 | 2 | Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified & directed by the Engineer-in-Charge. | 12 | Cubic Metre | |
| 3 | 3 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified & directed by the Engineer-in-Charge. | 2 | Cubic Metre | |
| 4 | 4 | Taking down cement or cement lime plaster work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc, complete all as specified & directed by the Engineer-in-Charge. | 390 | Square Metre | |
| 5 | 5 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by the Engineer-in-Charge. | 20 | Each | |
| 6 | 6 | Taking down shutters exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified & directed by the Engineer-in-Charge. | 30 | Each | |
| 7 | 7 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sq.m each complete all as specified & directed by the Engineer-in-Charge. | 14 | Each | |
| 8 | 8 | Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 15 mm bore pipe complete all as specified & directed by the Engineer-in-Charge. | 45 | Running Metre | |
| 9 | 9 | Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 20 mm bore pipe complete all as specified & directed by the Engineer-in-Charge. | 35 | Running Metre | |
| 10 | 10 | Dismantling old unserviceable water storage tank of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 11 | 11 | Dismantling old unserviceable water storage tank of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 12 | 12 | Taking down CI/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed by the Engineer-in-Charge. | 24 | Running Metre | |
| 13 | 13 | Dismantling of cast iron or reinforced concrete drain pipes 100 mm dia jointed in cement mortar and taking out of trenches, if required, complete all as specified & directed by the Engineer-in-Charge. | 12 | Running Metre | |
| 14 | 14 | Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels not exceeding 3 metres long and joints shall be filled with the mixture of bitumen and sand in proportion (1:3) by weight, complete all as specified & directed by the Engineer-in-Charge. | 100 | Square Metre | |
| 15 | 15 | Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge. | 45 | Square Metre | |
| 16 | 16 | Material & labour for screed bed/ bedding layer 15mm thick in cement mortar 1:4, surfaces finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge. | 45 | Square Metre | |
| 17 | 17 | Material & labour for Non-skid coloured glazed Vitrified tiles 7 to 8 mm thick (square/rectangular) polished, area exceeding 0.11 Sqm but not exceeding 0.18 Sqm of each tiles in floors etc set , jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles complete all as specified & directed by the Engineer-in-Charge. | 45 | Square Metre | |
| 18 | 18 | Material & labour for coloured Glazed vitrified tiles of approved design pattern of size 450mm x 350mm x 7mm thick on vertical surfaces including set , jointed in neat grey cement slurry and pointed in white or colour cement to match the shade of the tiles over 15 mm thick plaster in cement mortar (1:4) etc, complete all as specified & directed by the Engineer-in-Charge. | 90 | Square Metre | |
| 19 | 19 | Material & labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work/Stone masonary or concrete surfaces of walls, including finish even and smooth surfaces , using without extra cement complete all as specified & directed by the Engineer-in-Charge. ( Internal plaster) | 140 | Square Metre | |
| 20 | 20 | Material & labour for rendering 15mm thick in cement mortar 1:4 with WPC @ 3% by weight of cement on stone/brick masonry surfaces or surface other than fair face of stone/brick work , including finish even and smooth surfaces without using extra cement complete all as specified & directed by the Engineer-in-Charge. \n(external plaster) | 150 | Square Metre | |
| 21 | 21 | Material & labour for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces on ceiling including finish even and smooth surfaces without using extra cement complete all as specified & directed by the Engineer-in-Charge. (Ceiling plaster) | 100 | Square Metre | |
| 22 | 22 | Supply only Integral water proofing compound complete all as specified & directed by the Engineer-in-Charge. | 20 | Kilogram | |
| 23 | 23 | Material & labour for formwork to chajjas, water troughs and similar articles/items including edges for rough finished flat surface complete all as specified & directed by the Engineer-in-Charge. | 20 | Square Metre | |
| 24 | 24 | Material & labour for nominal mix RCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in chajjas, water troughs and similar articles/items complete all as specified & directed by the Engineer-in-Charge. | 2 | Cubic Metre | |
| 25 | 25 | Supply & fixing Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed by the Engineer-in-Charge. | 470 | Kilogram | |
| 26 | 26 | Material & labour for mild steel framed work such as grills grating with ends of bars/guard bar welding with framed complete all as specified & directed by the Engineer-in-Charge. | 210 | Kilogram | |
| 27 | 27 | Material & labour for preparing new plastered or unplastered surfaces of walls & applying two coats of cement base paint on walls over a coat of primer complete all as specified & directed by the Engineer-in-Charge. | 150 | Square Metre | |
| 28 | 28 | Material & labour for preparing surfaces of newly plastered or unplastered surfaces and applying three coats of white wash on walls complete all as specified & directed by the Engineer-in-Charge. | 100 | Square Metre | |
| 29 | 29 | Material & labour for preparing surfaces of newly plastered or unplastered surfaces and applying two coats of oil emulsion distemper over a coat of primer on walls complete all as specified & directed by the Engineer-in-Charge. | 100 | Square Metre | |
| 30 | 30 | Material & labour for preparation of newly plastered or unplastered surface and applying three coats of white wash on ceiling complete all as specified & directed by the Engineer-in-Charge. | 100 | Square Metre | |
| 31 | 31 | Material & labour for Cutting chases for concealed water tubing and making good in cement mortar 1:3 on brick wall /stone masonary or any other surface cutting not exceeding 10 cm in girth complete all as specified & directed by the Engineer-in-Charge. | 30 | Running Metre | |
| 32 | 32 | Supply & fixing 15mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. | 30 | Running Metre | |
| 33 | 33 | Supply & fixing 20 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. | 20 | Running Metre | |
| 34 | 34 | Refixing of 15mm bore old steel tubing & connection in new or old position (walls ceilings floors etc) complete all as specified & directed by the Engineer-in-Charge. | 15 | Running Metre | |
| 35 | 35 | Refixing of 20 mm bore old steel tubing & connection in new or old position (walls ceilings floors etc) complete all as specified & directed by the Engineer-in-Charge. | 15 | Running Metre | |
| 36 | 36 | Supply & fixing in repairs Bib tap, cast copper alloy Chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle for 15mm bore complete all as specified & directed by the Engineer-in-Charge. | 14 | Each | |
| 37 | 37 | Supply & fixing in repairs EWC seat cover PVC white colour including all fitting arrangements complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 38 | 38 | Supply & fixing in repairs fancy type overhead shower with arm swivel joint chromium plated screwed down 15mm bore complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 39 | 39 | Supply & fixing in repairs fancy type Pillar Tap of brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore, complete all as specified & directed by the Engineer-in-Charge. | 6 | Each | |
| 40 | 40 | Supply & fixing in repairs Chromium plated stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle for 15mm bore complete all as specified & directed by the Engineer-in-Charge. | 20 | Each | |
| 41 | 41 | Supply & fixing in repairs brass chromium plated handspray with flxible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed as approved by GE. | 4 | Each | |
| 42 | 42 | Supply & fixing in repairs chromium plated soap dish complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 43 | 43 | Supply & fixing in repairs of PVC connection 15mm size of length 450mm, with PTMT nuts complete all as specified & directed by the Engineer-in-Charge. | 20 | Each | |
| 44 | 44 | Supply & fixing in repairs of vitreous china water closet (squatt pattern) complete incluing provision of lime concrete bedding fixed in repairs of orisia pattern size 580x440mm, white, with and including foot rest (excluding flushing cistern & flush pipe) complete including provision of lime comcrete and connection to flushing pipe ,antisyphonage pipe and trap and making good to floor as specified and as directed by Engineer in charge. | 4 | Each | |
| 45 | 45 | Supply & fixing in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern & flush pipe) including connection to drain flush pipe and anti syphonage pipe complete all as specified as approved by GE. | 2 | Each | |
| 46 | 46 | Supply & fixing in repairs PVC valveless syphonic action type flushing cistern low level 10 Litres capicty white, fixed with new MS brackets complete all as specifed and directed as approved by GE. | 6 | Each | |
| 47 | 47 | Supply & fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with new brackets excluding taps waste china & plug including bracket etc complete all as specified & directed by the Engineer-in-Charge. | 6 | Each | |
| 48 | 48 | Supply & fixing in repairs 600mm x 450 mm beveled edge looking mirror of selected quality glass mounted on 4 to 5 mm thick PVC board backing and fixed to wooden plugs with chromium plated brass screws and cup washers in postion complete all as specified & directed by the Engineer-in-Charge. | 6 | Each | |
| 49 | 49 | Supply & fixing in repairs Brass chromium plated waste pipe 32 mm dia with long shank and fly nuts etc for wash basins complete all as specified & directed by the Engineer-in-Charge. | 6 | Each | |
| 50 | 50 | Supply & fixing rotational moulded polyethylene water storage tank of capacity 1000 Litres (Cylindrical vertical with closed top), triple layer construction, ISI marked hoisted & fixed in position including GI light grade 20mm dia over flow pipe 450mm long and waste pipe 600mm long with all fitting etc. etc complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 51 | 51 | Supply & fixing rotational moulded polyethylene water storage tank of capacity 500 Litres (Cylindrical vertical with closed top), triple layer construction, ISI marked hoisted & fixed in position including GI light grade 20mm dia over flow pipe 450mm long and waste pipe 600mm long with all fitting etc. etc complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 52 | 52 | Supply & fixing in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 15mm-142grms) complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 53 | 53 | Supply & fixing in repairs Gun-metal, globe or gate valves, of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 54 | 54 | Supply & fixing in repairs coloured powder coated drapery Rod of aluminum 25mm inner dia With supporter and on coloured powder coated aluminum decorative type designe and pattern approved by GE, including decorative brackets both ends complete all as specified & directed by the Engineer-in-Charge. | 80 | Running Metre | |
| 55 | 55 | Supply & fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubbering joints fixed to walls with clamps complete all as specified & directed by the Engineer-in-Charge. | 14 | Running Metre | |
| 56 | 56 | Supply & fixing 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by the Engineer-in-Charge. | 6 | Running Metre | |
| 57 | 57 | Supply & fixing PVC (SWR) bend any radius of 110 mm bore complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 58 | 58 | Supply & fixing PVC (SWR) bend any radius of 110 mm bore with oval access door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 59 | 59 | Supply & fixing 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access oval door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 60 | 60 | Supply & fixing 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 61 | 61 | Supply & fixing 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 62 | 62 | Supply & fixing 110 mm bore PVC (SWR) couplers complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 63 | 63 | Supply & fixing 110 mm bore PVC (SWR) vent cowl complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 64 | 64 | Supply & fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by the Engineer-in-Charge. | 10 | Running Metre | |
| 65 | 65 | Supply & fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls with clamps complete all as specified & directed by the Engineer-in-Charge. | 6 | Running Metre | |
| 66 | 66 | Supply & fixing 75 mm bore PVC (SWR) bend any radius with access door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 67 | 67 | Supply & fixing 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 68 | 68 | Supply & fixing 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 69 | 69 | Supply & fixing 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 70 | 70 | Supply & fixing 75 mm bore PVC (SWR) couplers complete all as specified & directed by the Engineer-in-Charge. | 2 | Each | |
| 71 | 71 | Supply & fixing in repair PVC (SWR) floor trap of 75 mm outlet, plain with grating including jointing with solvent cement complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 72 | 72 | Material & labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 73 | 73 | Supply & fixing PVC Flush pipe of 32 mm dia for low level cistern complete all as specified & directed by the Engineer-in-Charge. | 6 | Each | |
| 74 | 74 | Material & labour for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms etc in one piece as reuired size and laid over cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed by the Engineer-in-Charge.. | 2 | Square Metre | |
| 75 | 75 | Rounding/ chamfering to edge of stone slab like granite, marble , kota stone etc to required shape & design including grinding & polishing to obtain required finished complete all as specified & directed by the Engineer-in-Charge. | 6 | Running Metre | |
| 76 | 76 | Supply & fixing steel windows with side hung shutters on both sides to receive glass on one side and to receive guaze on other side including projecting type hinges with steel handle on both shutters and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & directed by the Engineer-in-Charge. | 15 | Square Metre | |
| 77 | 77 | Supply & fixing Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed by the Engineer-in-Charge. | 5.76 | Square Metre | |
| 78 | 78 | Material & labour for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified & directed by the Engineer-in-Charge. | 94 | Square Metre | |
| 79 | 79 | Material & labour for preparation of old painted steel surfaces and applying two coats of synthetic enamel paint complete all as specified & directed by the Engineer-in-Charge. | 25 | Square Metre | |
| 80 | 80 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames complete all as specified & directed by the Engineer-in-Charge. | 8.5 | Square Metre | |
| 81 | 81 | Material & labour for sheet glass ordinary quality 3mm thick fitted with beeding/putty not exceeding 0.5 sqm each complete all as specified & directed by the Engineer-in-Charge. | 20 | Square Metre | |
| 82 | 82 | Material & labour for sheet glass ordinary quality 3 mm thick fitted with beading/putty not exceeding 0.5 sqm each sheet glass is ground or obscured or frosted, on one side and fixed complete all as specified & directed by the Engineer-in-Charge. | 8.5 | Square Metre | |
| 83 | 83 | Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube fixed with 75mm long MS screws with PVC fasteners to wall all including repair of james of wall & finishes complete all as specified and directed . \n | 60 | Running Metre | |
| 84 | 84 | Supply & fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside withsolvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete as per specification & drawing | 16 | Square Metre | |
| 85 | 85 | Supply & fixing butt hinges medium weight, cold rolled mild steel, of size 125mm long complete all as specified & directed by the Engineer-in-Charge. | 102 | Each | |
| 86 | 86 | Supply & fixing aluminim anodised barrel tower bolt 150 mm long extruded section complete all as specified & directed by the Engineer-in-Charge. | 60 | Each | |
| 87 | 87 | Supply & fixing aluminim anodised barrel tower bolt 200 mm long extruded section complete all as specified & directed by the Engineer-in-Charge. | 44 | Each | |
| 88 | 88 | Supply & fixing extruded aluminium alloy handle 150 mm long fabricated type anodised complete all as specified & directed by the Engineer-in-Charge. | 60 | Each | |
| 89 | 89 | Supply & fixing extruded aluminium alloy handle 200 mm long fabricated type anodised complete all as specified & directed by the Engineer-in-Charge. | 44 | Each | |
| 90 | 90 | Material & labour for 250mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by the Engineer-in-Charge. | 20 | Each | |
| 91 | 91 | Supply & fixing for floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring over all length of cover plate 150 mm complete all as specified & directed by the Engineer-in-Charge. | 21 | Each | |
| 92 | 92 | Supply & fixing mild steel 300mm, ordinary rat rail rod patternspring including roller and roller plate (Helical door spring) for door shutter complete all as specified & directed by the Engineer-in-Charge. | 21 | Each | |
| 93 | 93 | Material & labour for taking down shutter exceeding 1 sqm but not exceeding 2.00 sqm including resecuring or easing & adjusting and refixing the shutter in the same opening with same hardware complete all as specified & directed by the Engineer-in-Charge. | 50 | Each Leaf | |
| 94 | 94 | Supply & fixing factory made 35 mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail & panel of 9mm B.W.P. commercial ply . The size of rail & stile as per IS: 1003 (Part I), Kiln seasoned & chemically pressure treated complete all as specified & directed by the Engineer-in-Charge. | 40 | Square Metre | |
| 95 | 95 | Supply & fixing 35 mm thick second class hard wood skeleton shutters, open rebated and prepared to receive gauze, etc divided into squreswith plain,chamfered or rounded,mitred and rebated sash bars any numbers. and mitred beads for securingwire gauge,etc.; sizes of me-mbersof shutters asspecified in SSR Part I, Section 8, clause 8.24 (a); Kiln seasoned & chemically pressure treated complete all as specified & directed by the Engineer-in-Charge. | 40 | Square Metre | |
| 96 | 96 | Material & labour preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth by filling coat with grey filler or liquid wood filler transparent and bringing forward surfaces to smooth even finish and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed by the Engineer-in-Charge. | 120 | Square Metre | |
| 97 | 97 | Material & labour preparation of old wooden surfaces of any description, not other wise described over 10cm width or girth by filling coat with grey filler or liquid wood filler transparent and bringing forward surfaces to smooth even finish and applying two coat of synthetic enamel paint complete all as specified & directed by the Engineer-in-Charge. | 40 | Square Metre | |
| 98 | 98 | Material & labour for Framed work 410-W as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges welding complete all as specified & directed by the Engineer-in-Charge. | 476 | Kilogram | |
| 99 | 99 | Material & labour for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified & directed by the Engineer-in-Charge. | 26 | Kilogram | |
| 100 | 100 | Supply & fixing in repair 18mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement /adhesive to make kitchen cabinate and cup board shutters including all necessary arrangement complete all as specified and directed. | 27 | Square Metre | |
| 101 | 101 | Supply & fixing Magnet catch for kitchen cabinet shutters as per approved sample complete all as specified & directed by the Engineer-in-Charge. | 26 | Each | |
| 102 | 102 | Supply & fixing mild steel Continuous (piano) hinge, width of flaps(when open) in 30mm complete all as specified and directed. | 8 | Running Metre | |
| 103 | 103 | Supply & fixing in repairs chromium plated grating of size 100 mm dia complete all as specified & directed by the Engineer-in-Charge. | 12 | Each | |
| 104 | 104 | Supply & fixing in repairs of MS powder coated peg sets of 3 Nos peg set of good quality, complete all as specified and directed. | 13 | Each | |
| 105 | 105 | Supply & fixing Hasp & staple 100 mm size aluminium anodised fixed with screws complete all as specified & directed by the Engineer-in-Charge. | 13 | Each | |
| 106 | 106 | Supply and fixing in repairs of 150mm aluminium handles cast type anodised complete all as specified & directed by the Engineer-in-Charge. | 26 | Each | |
| 107 | 107 | Supply & fixing brass chromium plated Tubular Towel Rail 20 mm dia complete all as specified & directed by the Engineer-in-Charge. | 16 | Running Metre | |
| 108 | 108 | Supply & fixing brass chromium plated brackets for above items complete all as specified & directed by the Engineer-in-Charge. | 14 | Each pair | |
| 109 | 109 | Supply & fixing in repairs vitreous china bowl urinal, flat back, size 465 X 355 X 265mm (minimum) white with grating & union including new MS brackets etc complete all as specified & directed by the Engineer-in-Charge. | 4 | Each | |
| 110 | 110 | Material & labour for 20 to 25mm thick machine cut kota stone slab flooring with as in slab with Kota stone of size asa directed, laid over screed bed & jonted with grey cement slurry mixed with pigment to match the shade of the slab including rubbings & polishings with bee wax polish complete all as specified and directed. | 60 | Square Metre | |
| 111 | 111 | Supply & fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified & directed by the Engineer-in-Charge. | 60 | Square Metre | |
| 112 | 112 | Excavation in trenches, not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc.not exceeding 10 Sqm on plan and getting out hard/dense soil complete all as specified & directed by the Engineer-in-Charge. | 6 | Cubic Metre | |
| 113 | 113 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified & directed by the Engineer-in-Charge. | 3.8 | Cubic Metre | |
| 114 | 114 | Removing excavated material exceeding 250 metres but not exceeding 500 metres and depositing where directed complete all as specified & directed by the Engineer-in-Charge. | 2.2 | Cubic Metre | |
| 115 | 115 | Material & labour for PCC 1:4:8 type D-2(40mm graded aggregate) in foundation, sub base, filling and mass concrete and post holes complete all as specified & directed by the Engineer-in-Charge. | 8 | Cubic Metre | |
| 116 | 116 | Material & labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified & directed by the Engineer-in-Charge. | 3.6 | Square Metre | |
| 117 | 117 | Material & labour for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified & directed by the Engineer-in-Charge. | 22 | Square Metre | |
| 118 | 118 | Material & labour for nominal mix Reinforced Cement Concrete (1:2:4 ) , type B1 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified & directed by the Engineer-in-Charge. | 1 | Cubic Metre | |
| 119 | 119 | Material & labour for nominal mix Reinforced Cement Concrete (1:2:4 ) , type B1 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified & directed by the Engineer-in-Charge. | 3.4 | Cubic Metre | |
| 120 | 120 | Supply & fixing Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed by the Engineer-in-Charge. | 40 | Kilogram | |
| 121 | 121 | Material & labour for rendering 10mm thick in cement mortar (1:4) on stone concrete including finish even and smooth surfaces using without extra cement complete all as specified & directed by the Engineer-in-Charge. | 20 | Square Metre | |
| 122 | 122 | Material & labour for preparation of newly plastered or unplastered surface of walls and applying two coats of cement based paint, over a coat of chalk whiting complete all as specified & directed by the Engineer-in-Charge. | 20 | Square Metre | |
| 123 | 123 | Supply & fixing mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ; framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts etc similar work con- forming to Fe.410-0or Fe 310-0 complete all as specified & directed by the Engineer-in-Charge. | 450 | Kilogram | |
| 124 | 124 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and directed by the Engineer-in-Charge. | 60 | Square Metre | |
| 125 | 125 | Supply & fixing Posts and struts in fencing made of Mild Steel sections i.e. angle, channel,flat iron etc. including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by the Engineer-in-Charge. | 1500 | Kilogram | |
| 126 | 126 | Supply & fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed by the Engineer-in-Charge. | 15 | 100 Running Metre | |
| 127 | 127 | Supply & fixing mild steel flat iron 40x6mm for securing the chain link fencing including necessary drilling for holes, cutting, punching, bending etc complete all as specified and directed by the Engineer-in-Charge. | 578 | Kilogram | |
| 128 | 128 | Supply & fixing 5 to 10 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10 cm long complete all as specified and directed by the Engineer-in-Charge. | 20 | Kilogram | |
| 129 | 129 | Supply only 12mm dia round bars for reinforcement, in available lengths complete all as specified and directed by the Engineer-in-Charge. | 270 | Kilogram | |
| 130 | 130 | Supply & Fixing mild steel galavanized chain link fencing of 3.15mm dia of wire and 100mm x 100mm mesh size including line wire, any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed by the Engineer-in-Charge. | 468 | Kilogram | |
| 131 | 131 | Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete,such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. Complete all as specified and directed by Engineer-in-Charge. | 174 | Per \nPoint \n | |
| 132 | 132 | Taking down MCB DB with MCB any type and any capacity all as specified and directed by Engineer-in-Charge. | 10 | Each | |
| 133 | 133 | Taking down Sub main wiring any type any size all as specified and directed by Engineer-in-Charge. | 400 | Running Metre | |
| 134 | 134 | Material & labour for point wiring for One Light / Buzzer / Fan Point controlled by one switch 5 Amp, SP, one way 240 volts, with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and including 20mm dia medium grade rigid PVC conduit (ISI marked) with all accessories including surface / concealed sheet steel terminal / CI box with 3 mm thick hylam / masonite sheet top cover including 1.5 sqmm size PVC insulated unsheathed copper conductor multistranded cable for continuous earth conductor (using green colour) to common earth and connecting to earth dolly, complete all as specified and directed by the Engineer-in-Charge. | 126 | Per \nPoint \n | |
| 135 | 135 | All as per item No.134 above but additional light point on same switch board complete. | 10 | Per\nPoint \n | |
| 136 | 136 | All as per item No 134 above but one 5 Amp 3 pin multi socket point on independent board complete . | 10 | Per \nPoint \n | |
| 137 | 137 | All as per ser item No 134 here in before, but for one 5/15 Amp socket point controlled by 15 Amp switch, SP one way 240 Volts & Socket, using 4Sqmm FRLS (nominal area) multistranded copper conductor cable/wire and 2.5 sqmm size FRLS PVC insulated unsheathed copper conductor cable for earth continuity (green colour) complete all as specified and directed. | 28 | Per point \n | |
| 138 | 138 | Supply & fixing switch piano flush type single pole one way, 5 Amp complete all as specified and directed by the Engineer-in-Charge. | 146 | Each | |
| 139 | 139 | Supply & fixing socket outlet 2 in 1, 3 pin 6 Amps complete all as specified and directed by the Engineer-in-Charge. | 14 | Each | |
| 140 | 140 | Supply & fixing Switch socket combination 5 Pin, 5A/16A, flush type 15 Amp, 5 -in-1, controlled by one switch complete all as specified and directed by the Engineer-in-Charge. | 28 | Each | |
| 141 | 141 | Supply & fixing in repairs MCB SP 240 Volts, 50Hz, 10 kA, conforming to IS 8828 of rating 6 to 32 Amps complete all as specified and directed by the Engineer-in-Charge. | 60 | Each | |
| 142 | 142 | Supply & fixing in repairs MCB, SPN, 240 Volts, 50Hz, 10kA conforming to IS-8828 of rating 40 Amps complete all as specified and directed by the Engineer-in-Charge. | 7 | Each | |
| 143 | 143 | Supply & fixing in repairs MCB, SPN, 240 Volts, 50Hz, 10kA conforming to IS-8828 of rating 63 Amps Make indoasian or euivalent given in PS complete all as specified. | 9 | Each | |
| 144 | 144 | Supply & fixing in repairs ceiling rose surface bakelite 65 mm x 50mm, three terminals complete all as specified and directed by the Engineer-in-Charge. | 126 | Each | |
| 145 | 145 | Supply & fixing MCB distribution board SPN, 8 ways, 230 Volts, 50 Hz, AC, double door made out of sheet metal phosphatised and painted with epoxy polyster based powder paints with 200 Amps rated bus bar and earth bar,complete all as specified and directed by the Engineer-in-Charge. | 7 | Each | |
| 146 | 146 | Supply & fixing MCB distribution board TPN, 8 ways, 415 Volts, 50 Hz, AC, vertical , double door made out of sheet metal phosphatised and painted with epoxy polyster based powder paints with 200 Amps rated bus bar and earth bar, complete all as specified and directed by the Engineer-in-Charge. | 3 | Each | |
| 147 | 147 | Material & labour for Sub main wiring with two runs of 4 Sqmm PVC insulated but unsheathed FRLS cable with multistrrad copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all fixed concealed in wall or on ceiling surfaces and also including one runs of 2.5 Sqmm PVC insulated but unsheathed FRLS cable with multistrrad copper conductors 1100 volt as earth continuity conductor of similar type of cable complete all as specified and directed by Engineer in charge. Note :- 2 runs of main cable one run of earth wire one run of PVC pipe will be measured as an one run. | 100 | Running Metre | |
| 148 | 148 | All as per Item No 147 but 2 Run of 6 Sqmm cable and one run of 4 sqmm cable for earth wire. | 300 | Running Metre | |
| 149 | 149 | Material & labour for cutting chases,pinning in.making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps, cills,sunshades, shelves, lintels, etc, and cutting chases for cocealed water tubing or consealed conduit wiring etc.and making good,cutting not n.exc 10 cm girth complete all as specified and as directed by Engineer-in-Charge. | 60 | Running Metre | |
| 150 | 150 | Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 415 volt including MCB 20 amps complete all as specified and as directed by Engineer-in-Charge. | 14 | Each | |
| 151 | 151 | Material & labour for earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with PCC frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed.\nNote: -(i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. \n(ii) Item includes the cost of 7.5 metre GI earth lead.\n | 3 | Each Set | |
| 152 | 152 | Supply & fixing in repairs 10 watt LED type mirror light fitting to fix on top complete all as specified and as directed by Engineer-in-Charge. | 56 | Each | |
| 153 | 153 | Supply & fixing in repairs round shaped surface mounted LED 18Watt, LED panel. PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaire. Efficacy 100lm/w cat part No LCDSPLN-R-18-CDL of Crompton or euivalent make mentioned in Appendix 'B' as approved by the GE. | 14 | Each | |
| 154 | 154 | Supply & fixing in repair LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 125 lumens per watt High-quality materials and design. Extruded aluminum housing enhances safety. High quality PC Diffuser. Reliable and robust housing structure, maximize the endurance over the life time Slim Integrated design, easy to install Efficacy : 125 lumen/watt. Make - Crompton Cat No LCTLN-20-CDL or euivalent make mentioned in Appendix 'B' as approved by the GE. | 21 | Each | |
| 155 | 155 | Supply & fixing MCB TPN 100 Amps, 'C' curve Type, 10KA complete all as specified and directed by the Engineer-in-Charge . | 3 | Each | |
| 156 | 156 | Supply and fixing heavy duty exhaust fan single phase 300mm sweep including all connected accessories and making necessary cutting and chasing to make holes on wall to fix the fans as directed and specified by Engr-in-charge. | 14 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
