Addition /Alteration To Dg Set Room , Dsc Living In Billets , Washroom Of Airmen Billets , Provision Of Visitor Room , Hard Standing , Interlocking Pathway , Parking Shed , False Ceiling , Mastic Flooring , Soak Well With Mr/Mw B/R Wks At Af Stn Wa, Area A,B And C Af Stn Wadsar-Gujarat

TDR : 25534904

Tender Notice
BOQ

Expired

Area A,B And C Af Stn Wadsar , Gujarat

Tender Brief : Addition /Alteration To Dg Set Room , Dsc Living In Billets , Washroom Of Airmen Billets , Provision Of Visitor Room , Hard Standing , Interlocking Pathway , Parking Shed , False Ceiling , Mastic Flooring , Soak Well With Mr/Mw B/R Wks At Af Stn Wa

Document Fees
₹ 500 /-

EMD
₹ 76000.0 /-

Tender Value
Refer document

Submission Date
13-10-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: ADDN/ALTERATION TO DG SET ROOM, DSC LIVING IN BILLETS,WASHROOM OF AIRMEN BILLETS, PROVISION OF VISITOR ROOM, HARD STANDING, INTERLOCKING PATHWAY,PARKING SHED, FALSE CEILING, MASTIC FLOORING, SOAK WELL ALONGWITH CERTAIN B/R MAJOR REVENUE/MINOR WORKS AT VARIOUS LOCATIONS OF AREA A, AREA B AND AREA C AF STATION WADSAR
1	1	Surface dressing not exceeding 15cm deep and getting out in soft/loose soil.	75.12	SQM
2	2	Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation etc or for shafts, wells etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil.	61.64	CUM
3	3	Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the frame)and reixing to other opening complete all asspecified and directed.	13	EACH
4	4	M&L for PCC 1:4:8 type D- 2 (40mm graded aggregate) in foundations, filling and mass concrete.	6.6	CUM
5	5	M&L Brick work with fly ash bricks, sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and as directed by Engineer-in-Charge.	45.88	CUM
6	6	M&L for Reinforced cement concrete (nominal mix) 1:2:4, B1 (using 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as spd and directed.	6.5	CUM
7	7	Use and waste of form work to foundations, footings, foundation beams , plinth beams, bases for columns etc besement slabs under reamed piles rough finished surfaces of concrete of flat for RCC works etc complete all as spd and directed.	46.5	SQM
8	8	S & F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annelaed) not less than 0.9mm dia complete all as specified.	620	KG
9	9	S & F mild steel TMT bars 6 to 8 mm dia over upto and including 10 mm dia in strrups, spaces and binders and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annelaed) not less than 0.9mm dia complete all as specified.	281	KG
10	10	All as per item No 9.00 above, but 6 mm dia and over upto and including 10mm dia for links, stirrups, spacers and binders all as specified and directed.	250	KG
11	11	M&L for Providing PCC 1:2:4, B1 (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including form work complete all as specified and directed.	1.1	CUM
12	12	M/L for 10mm thick rendering in CM 1:4 on wall surface in with water proofing compound @ 3% of weight of cement including finishing the surface even and smooth without using extra cement. (WPC shall be measured and paid seperately) complete all as specified and directed.	31	SQM
13	13	Supply only integral water proofing compound (ISI Marked).	71	KG
14	14	M & L rendering 10 mm thick in CM 1:6 on wall surfaces finishing with even and smooth (without using extra cement) etc complete all as specified and directed	147	SQM
15	15	All as per item No 14.00 above but 15 mm thick rendering complete.	303	SQM
16	16	M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.	79	SQM
17	17	M&L for complete removal of existing treatment of wall surface and applying two coats of cement base paint over a coat of primer in old surface of wall and filling cracks with white cement etc complete all as specified and directed.	330	SQM
18	18	M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion (OBD) over a coat of primer over a 3 mm thick coat of Birla wall putty.	122.4	SQM
19	19	M&L for complete removal of existing treatment of wall surface and applyiong two coats of distemper oil emulsion (OBD) over a coat of primer over a 3 mm coat of Birla wall putty in old surface of wall.	210	SQM
20	20	Returning, filling in, including spreading, levelling, watering and well ramming in layers no exc 25cm in soft/loose soil.	35.17	CUM
21	21	Removing excavated material exc n exc 50m depositing where directed at a level n exc 1.5m above the starting point.	194.37	CUM
22	22	S&F for MS framed works as in purlins, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 complete all as specified and as directed.	2495	KG
23	23	S&F for 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.	3	SQM
24	24	M&L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as speified and as directed by Engineer-in-Charge.	186.2	SQM
25	25	M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete.	100.52	SQM
26	26	All as per item No 25.00 above but a coat on old steel surfaces.	10	SQM
27	27	M&L treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area.	10.5	SQM
28	28	M&L treating the backfill in contract with foundation at the rate of 7.5 ltrs of emulsion per sqm of vertical surface area and side of internal beams complete.	22.2	SQM
29	29	M&L treating the top surface of filled earth of flooring and under plinth protection at the rate of 5 ltrs of emulsion per sqm of surface area.	50.5	SQM
30	30	M&L treating the soil along with external perimeter of building at the rate of 2.5 ltrs of emulsion per sqm of perimeter wall.	31.96	RM
31	31	M&L for hardcore of gauge not exceeding 63 mm deposited spreaded and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stones or boulders etc.	97.59	CUM
32	32	M&L 75 mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed.	641	SQM
33	33	M&L for machine cut kota stone slab flooring 20 - 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and single stone for trades etc including rubbing and polishing 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6.complete including backing coat all as specified.	15	SQM
34	34	M&L 75 mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) as in plinth protection etc and finish the surface even and fair complete all as specified and directed.	9	SQM
35	35	Excavating in post holes each not exceeding 0.5cum getting out in soft/loose soil, and removing surfaces soil to a distance n exc 50m and making good surfaces.	20	EACH
36	36	M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation of posts and pillars and brick work foundation	2.18	CUM
37	37	M&L for Machine pressed precast conctete interlocking glossy/ lacquer finish paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness including 2mm thick rubber mould glossy/ lacquer finish paver block of Grade M-35 and over sand cushion( Note- Sand will be measured and paid separately)	626	SQM
38	38	M &L sand filling (sand cushioning) under path for layers interlocking tiles/ for cable cushioning complete.	20.66	CUM
39	39	S&F Fancy elbow type CP Wash hand basin tap of 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads with rod for screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.	22	EACH
40	40	S&F PVC Bathroom cabinet mirror 450mmx300mm of selected quality 2 mm thick fixed with rectangular shape and Cat-556 complete all as specified and directed by Engineer in charge.	16	EACH
41	41	Excavating over area not exceeding 1.5 mtr deep and getting out soft /loose soil complete all as specified and directed by Engineer in charge.	206.09	CUM
42	42	All as per item No 41.00 above but depth exceeding 1.5 m and not exceeding 3 m all as specified.	39.39	CUM
43	43	All as per item No 41.00 above but depth exceeding 3 m and not exceeding 4.5 m all as specified.	10	CUM
44	44	M&L for providing precast cement concrete in PCC 1:2:4 type B-1 20mm graded aggregate as in kerb stone finished smooth using extra cement including necessary mould/form work and jointed in CM 1:4 struck flush with same mortar.	2.94	CUM
45	45	Removing excavated soil at a distance exceeding 1.50 km but not exceeding 5 km and\ndepositing where directed by Engineer in charge.	41.55	CUM
46	46	Dismantling and taking down existing water proofing treatment with base of cement concrete of any description and any thickness removing debrises(dismantled materials)outside MD land and cleaning properly the site etc all as specified and directed.	122	SQM
47	47	M&L for PCC 50 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring/padding(Cushion material) all as specified.	105	SQM
48	48	M&L for rendering 15 mm thick cement plaster using water proofing compound @ 3 % of weight of cement on fair faces of concrete surfaces of CM 1:4 finished surfaces even and smooth without using extra cement.	157	SQM
49	49	M/L for 3mm thick APP based polymeric membarane applying cold bituminous primer @0.30 litre/sqm conforming to IS 3384 Laying APP Polymer modified membrane 3kg/sqm in weight with non-woven polyster reinforcement(mineral gravel finish on upper side of the membrane) and sealing all overlaps of 100 mm in length side and 150 mm on width side of membrane by torching the same as per manufacture instruction all as per specified particular specifiaction all as specified and directed.	165	SQM
50	50	M&L for providing cement concrete type B-0, 1:2:4(12.5 mm graded aggregate )in roof kerbs or mud stop,rounded or chamfered on edges complete all as specified.	0.5	CUM
51	51	M&L removing the tank over roof and re-fixing in the same position including cleaning all as specified and as directed. (tanks exceeding 500 litre but not exceeding 1000 ltr)	6	EACH
52	52	Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof sab/RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 3.5 mtr to 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer of FOSROC or equivalent. Zink primer of CHEMISTIC/WEBAC on visible reinforcement surface to form a contineous film and preparing the surface to recive concrete of epoxy grouting mortar etc all as specified including providing necessary scaffolding complete.	200	SQM
53	53	M&L for applying bonding coat of modified styrene butadene emulsion (SBR bonding agent i.e nitobond SBR 45 or as approved) in proportion 1 Part (nitobond SBR 45:1 part (water) :3 part (OP cement) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete / screed concrete with old surface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc complete all as specified and as directed.	200	SQM
54	54	M&L for applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR (Nitobond SBR 45 of FOSROC /PIDILITE/ R or M International Mumbai/ 21 SHM mumbai) in proportion 1 part (cement):3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and directed\n	200	SQM
55	55	Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.	231	SQM
56	56	M&L for PCC 25 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring/levelling course all as specified.	28	SQM
57	57	M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6 complete all as specified and directed.	56	SQM
58	58	M&L glazed ceramic coloured digital tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 10mm thick etc all as specified.	175	SQM
59	59	M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.	56	SQM
60	60	Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store all as specified.	90	RM
61	61	All as per tem No 60.00 above but 20 mm dia all as specified.	75	RM
62	62	S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors all as directed.	90	RM
63	63	All as per tem No 62.00 above but 20 mm dia all as specified.	75	RM
64	64	S&F in repair Vitreous china white wash hand basin flat back of size 550 x400 mm including PVC waste pipe, PVC 15 mm dia 450 mm long with PTMT NUTS CONNECTION PIPE CP waste coupling including brackets cutting and pinning in ends of bracket complete.	5	EACH
65	65	S&F in repair brass chromium plated shower roses 125 mm size with swivel joints, any size including fixing to steel pipe or union 15 mm dia CP stop valves cast copper alloy with crutch or butterfly handle both ends for iron pipe or for fixed union.	9	EACH
66	66	S & F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges.	3	EACH
67	67	S&F in repair fancy type 15 mm dia CP bib tap cast copper alloy of minimum weight 400 gm with crutch or butterfly handle screwed down for iron pipe or union.	24	EACH
68	68	S&F in repair fancy type 15 mm dia CP stop valves cast copper alloy of minimum weight 400 gm with crutch or butterfly handle both ends for iron pipe or for fixed union.	16	EACH
69	69	S&F in repair vitreous china white wash down water closet pan(pedestal pattern) including fixing bolts,plastic seat cover with jet spray and including necessary flexible pipe connection complete all as specified and removing debris out side MD land.	4	EACH
70	70	S&F in repair PVC valveless, syphonic action type, flushing cistern, low level with inlet, ball valve ,float and handle including brackets.(The colour will also perfectly match with the EWC.)	4	EACH
71	71	S&F in repair 75mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement as directed.	13	EACH
72	72	S&F Stainless steel grating with or without hole of size 150 mm.	8	EACH
73	73	S&F in repair SS soap dish of size 100mm all as specified and as directed by Engineer-in-Charge.	8	EACH
74	74	Taking down cement or cement lime plaster of any description on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete.	615	SQM
75	75	M&L rendering 5 mm thick in CM 1:3 on ceiling surface including finished and smooth without using extra cement.	88	SQM
76	76	M&L preparation of old surfaces of wall and applying three coats of white wash complete all as specified.	140	SQM
77	77	M&L preparation of old decorated surfaces of ceiling and applying three coats of white wash complete all as specified and directed.	50	SQM
78	78	Vitreous China urinals, half stall urinal,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)	2	EACH
79	79	Demolition of brickwork or stone/ boulder masonry, built in cement mortar.	0.58	CUM
80	80	M&L Brick work with Fly ash Bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as apecified	5	SQM
81	81	M&L for rendering 10 mm tnick CM 1:6 and setting coat 5 mm thick CM 1:4 mixed with WPC @ 3% by weight of cement in external surface of wall including scaffolding complete all as specified and directed .\n Note:- WPC shall be measured and paid in relevant items of this schedule.	100	SQM
82	82	M&L rendering 5 mm thick in CM 1:4 on ceiling surface including finished and smooth without using extra cement.	50	SQM
83	83	M&L for water proofing treatment in wc bathrooms by applying cement slurry mix with water froofing chemicalas per manufacturers specification of approved make as under\n(a) All corner of WC, Bath shall be rounded by poviding fillet of dia 75mm\n(b) M&L for 15mm rendering on floor in CM 1:3 \n(c) M&L for allying cement slurry @0.488kg/sqm \n(d) Provide 32mm spout pipe about length= 400mm in wc portion\n(d) M& L for bitumen blown 90/15 applied nol, two coat to concrete surface at the rate of 1.50 Kg / Sqm per coat all as directed by Engineer-In-Charge. (e) incl demolition of lean concrete in sunken floor and refilling of lean concrete 1:5:10.	20	SQM
84	84	Taking down and refixing of 25 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc).	10	RM
85	85	S&F in repair Fancy type CP angular cock 15 mm dia cast copper alloy, chromium plated screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed.	12	EACH
86	86	S&F in repairs Vitreous china wash basin counter type size 550X400 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand.	4	EACH
87	87	M&L for granite work (of any type) 20 mm thick (table rubbed and polished) as in Counter wash hand basin including cutting of shape of ovel and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc all as specified and directed in Engineer -in -Charge.	2	SQM
88	88	S&F 15 mm dia pillar tapes fancy type of Chromoum Plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.	4	EACH
89	89	S&F LDPE PVC waste pipe of 32 mm dia for sink complete all as specified and directed	3.6	RM
90	90	S&F waste coupling of 32mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed. complete all as specified and directed.	4	EACH
91	91	S&F PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers all as specified and as directed by Engineer-in-Charge..	4	EACH
92	92	S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.	6	EACH
93	93	S&F 600x 450 mm bevelled edge mirror of selected quality of glass, mounted on 6 mm thick AC bldg board or commercial ply wood and fixed to wooded plug with chromium plated brass screw and cup washer.	6	EACH
94	94	S&F in repairs vitreous china wash down water closet pan semi- pedestal pattern (Anglo- Indian Type) with trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete.	6	EACH
95	95	S&F in repair of low level flushing cistern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete including brackets and 15mm bore 450mm long PVC connection all as directed.	6	EACH
96	96	S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)\n	6	EACH
97	97	Taking down CI pipe 100mm/75mm of any description all as specified and as directed by Engineer-in-Charge.	35	RM
98	98	S&F CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm all as specified and as directed by Engineer-in-Charge.	15	RM
99	99	All as per item No 98.00 above but 75mm dia in floor.	25	RM
100	100	Refixing of CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm all as specified and as directed by Engineer-in-Charge.	15	EACH
101	101	All as per item No 100.00 above but 75mm dia in floor.	15	EACH
102	102	S&F 100mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC outlet etc.	6	EACH
103	103	S&F 75mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC outlet etc.	6	EACH
104	104	M&L for bends of any type radius diminishing pieces or tapes ( large bore measured) of 75mm dia bore with oval access doors etc.	6	EACH
105	105	S&F cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc.	6	EACH
106	106	M&L for branch pices single (equal and unequal) ordenary or incerted (spigot or socket type) or with parallel branch of 75mm dia with oval access door	6	EACH
107	107	S&F 100mm bore Branch piece, single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches with oval access door.	6	EACH
108	108	S&F CI cowls of 100mm all as specified and as directed.	6	EACH
109	109	Taking down and refixing PVC door shutter only of any description exc 1 Sqm n. exc 2 Sqm and resecuring or easing & adjusting of the shutter refixing the same opeing etc	12	PER LEAF
110	110	Taking down and refixing PVC door shutter only of any description n exc 1 Sqm resecuring or easing & adjusting of the shutter refixing the same opeing etc	16	PER LEAF
111	111	S&F in repairs stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples.	6	SQM
112	112	S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete	54	RM
113	113	S&F factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete	16	SQM
114	114	S&F for 75mm long butt hinges, medium weight , cold rolled mild steel and fixed.	36	EACH
115	115	S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.	24	EACH
116	116	S&F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm.	2	EACH
117	117	S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.	24	EACH
118	118	M&L preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified.	50	SQM
119	119	M&L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.	63	SQM
120	120	M&L for preparation of newly plastered surfaces of wall and applying two coats of acrylic emulsion paint (weather proof) over a coat of primer as specified.	152.82	SQM
121	121	M&L for complete removal of existing treatment of wall surface and applying two coats of acrylic emulsion paint (weather proof) over a coat of primer in old surface of wall and filling cracks with white cement etc complete all as specified and directed.	50	SQM
122	122	S&F 50mm bore LDPE pipe fixed to wall, ceiling or in floors etc complete.	15	RM
123	123	Cutting chases,in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of andings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10 cm grith complete all as specified and as directed.	10	RM
124	124	M&L providing cement concrete type B-2, 1:2:4 (40mm graded aggregate)100mm thick as in flooring and finished the surface even and fair faces etc complete all as spd and directed.	122	SQM
125	125	M&L for 60mm thick Mastic flooring shall be generally laid in bays and mastic to be melt cooker, coarse aggregate, crushed stone screening and lime dust shall be fed in successive until the entire charge is thoroughly incorporated. After all the aggregate has been incorporated materials shall be mixed throughly and continuously heated for a period of not less than 2 hour temprature of 175 to 200 deg C. finishing surface hand tools to ensure accuracy. uniform and level surface can be obtained by levelling a heavy wooden float if blowing occur during laying, the bubbles should be punctured and area after should be made good while mastic is still hot the edges of each bay shall be made vertical accommodating next bay. this procedure should be adopted at junctions between floor and finish e the same as per manufacturer instructions and through the applicator of manufacturer including bitumin primer 80/100 Befroe applying the cleaning of PCC surface.	98	SQM
126	126	Removing excavated material exc 250 m and not exc 500 m and depositing where directed at a level n exc 1.5m above the starting point.	41	CUM
127	127	M&L for RCC M-25 ( Design mix) (using 20mm graded aggregated) as in Columns, pillars, piers post and struts etc complete all as specified and directed.	2.2	CUM
128	128	M&L for RCC M-25 ( Design mix) (using 20mm graded aggregated) as in beams, cantilevers, bressummers, lintels over 1.5 m span and including chajjas etc complete all as specified and directed.	1	CUM
129	129	M&L for RCC M-25 ( Design mix) (using 20mm graded aggregated) as in chajjas etc complete all as specified and directed.	0.2	CUM
130	130	M&L for RCC M-25 ( Design mix) (using 20mm graded aggregated) as in slab supported on walls, Roof beams and columns in floors, deck slabs and in shelves etc complete all as specified and directed.	13.69	CUM
131	131	Use and waste of form work tosides of pillars, posts struts, piers, columns etc rough finished surfaces of concrete of square, rectangular etc for RCC works etc complete all as specified and directed.	25.5	SQM
132	132	Use and waste of form work to sides/ bottom of concrete TB/RB beams cantilever lintels , shelves, chajjas rough finished surfaces of concrete of flat for RCC works etc complete all as specified and directed.	29	SQM
133	133	Use and waste of form work to soffit of suspended slab as roof stabs, floor stabs, landing and similar work n exc 200mm thick, rough finished surfaces of concrete.	68.96	SQM
134	134	M&L 100 mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed.	22.5	SQM
135	135	M&L for PCC 75 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate as in ramp flooring /levelling course all as specified.	22.5	SQM
136	136	M&L for cement concrete Type C-1,1:3:6 (20 mm graded aggregate) 75 mm thick as in plinth protection finishes even and fair without using extra cement finishing exposed edges fair for rounding and in phase every 2 mtr for length and joint shall be finsihed with bitumen and sand mixtures 1:3 complete all as specified and directed.	16.45	SQM
137	137	M&L for 20 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:4 complete all as specified and directed.	22.5	SQM
138	138	M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/ Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.	22.5	SQM
139	139	All as per Item No-138 above but in skirting including 15mm thick backing coat in CM 1 :4 complete.	1.82	SQM
140	140	M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc all as specified and as directed by Engr-in-charge .	5	SQM
141	141	M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc all as specified and as directed by Engr-in-charge.	1.8	SQM
142	142	M&L Rendering 10mm thick in CM(1:3) on cement concrete surfaces on the top of roof surfaces with water proofing compound to receive water proofing treatment all as per manufacturer instructions.(Note :-WPC will be measured and paid separetaly.)	43	SQM
143	143	M & L for machine cut Pre polished kota stone 16-18 mm thick (single peice as in raiser of steps with treads round nosing with three numbers of serration as in treads of steps), window door cills and jambs laid and jointed with grey cement slurry including cutting and mirror polishing over and including 10 mm thick backing coat /screed bed in CM 1:3 complete all as specified and directed.\n	4	SQM
144	144	M&L for bedding to drain pipes including packing under pipe, and haunching against both sides in PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) against the side of SWG/RCC pipes after they are laid and tested for 150 mm bore pipe all as specified and directed.	32	RM
145	145	M&L for brickwork with modular size fly ash bricks in one brick thick honeycomb walling, built in CM 1:4 complete.	30.64	SQM
146	146	Supply only Aggregate for loose filling, of gauge 80 mm to 150 mm graded etc complete.	38	CUM
147	147	M & L rendering 15 mm thick in CM 1:4 on wall surfaces finishing with even and smooth (without using extra cement) etc complete all as specified and directed	20	SQM
148	148	S&F cowl CI curved 75mm dia size complete.	2	EACH
149	149	M & L reinforced cement concrete 150mm dia pipes, class NP3, laid and jointed complete with collars.	35	RM
150	150	M&L for provission of false ceiling at height of 600x600x15 mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm expose d grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15x32x3000 mm spaced at 1200 mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 4.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15x26x1200 mm to be interloched between main runners at 600mm centers to form a 1200mm x 600 mm module. Cut cross tees longer than that 600mm to be supported independently. 600 mm x 600 mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15x26x600 mm centrally between the 1200mm crosstees perimeter wall angle of size 19x19x3000 mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module as approved by GE complete all as specified and directed.	161.5	SQM
151	151	Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power LT cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete.\n	70	RM
152	152	Supply and fix isolator DP 40 Amps.	1	EACH
153	153	M & L for burnt brick old size sub class 'B'laid in trenches abutting each other with a gap not exceeding 10 mm , vertically over the cable for cable protection complte all as specified and as directed.	508	EACH

Also Visit

Tenders

Gujarat Tenders

Vehicles and Accessories Tenders

Railway Machinery Tenders

Railway Ancillaries Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Addition /Alteration To Dg Set Room , Dsc Living In Billets , Washroom Of Airmen Billets , Provision Of Visitor Room , Hard Standing , Interlocking Pathway , Parking Shed , False Ceiling , Mastic Flooring , Soak Well With Mr/Mw B/R Wks At Af Stn Wa, Area A,B And C Af Stn Wadsar-Gujarat

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Addition /Alteration To Dg Set Room , Dsc Living In Billets , Washroom Of Airmen Billets , Provision Of Visitor Room , Hard Standing , Interlocking Pathway , Parking Shed , False Ceiling , Mastic Flooring , Soak Well With Mr/Mw B/R Wks At Af Stn Wa, Area A,B And C Af Stn Wadsar-Gujarat

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us