Transverse Upper Berth-Punjab

Supply Of , Transverse Upper Berth, Upholstery To Rdso Spec. # Rdso/2008/Cg-07 Rev- Nil With Amendment Slip No-4,Colour Shade & Pattern -Alnac-03.Cushioning Material To Rdso Spec. # C-K607 Rev-02., As Per Drawing: Mi006651 Alt A, Packing Instruction: Seat And Berth: All Protruding Portions Of Seat/Berth Should Be Protected With Environment Friendly Pre Moulded Thermocol Cap Of Requisite Strength Or Silicon Rubber Cap As An Alternate Option . Each Individual Seat/Berth Should Be Covered With Biodegradable Bubble Sheet Of Diameter 10Mm And Thickness 30 Micron All Round. Flap Of Berth Should Be Outside The Biodegradable Bubble Sheet Packing Leaving Seat & Berth Mounting Uncovered. Then It Should Be Properly Wrapped All Round In Thick Laminated Jute Fabric Of Sufficient Strength. The Complete Assembly Should Be Tied With Suitable Nylon Strips. It Is Further Wrapped With Biodegradable Polythene All Round To Prevent Ingress Of Dust/Water. For The Following Items (When Covered Under Seat And Berth Set) The Item-Wise Packing Instruction (Latest Version) Will Be As Under: For Packing Of Chair Angles, Expanded Metal Partition Frame, Suspension Straps, Supports And Mounting Bracket The Packing Instruction No. Pi004 Should Be Followed. For Packing Of Hardware Items The Packing Instruction No. Pi019 Should Be Followed. For Packing Of Accessories Like Bearing Bracket, Chain Bracket, Catch Arggt, Hinge Bracket And Sleeves Etc. The Packing Instruction No. Pi020 Should Be Followed. For Packing Of Ladders, The Packing Instruction No. Pi031 Should Be Followed. For Packing Of Luggage Racks The Packing Instruction No. Pi042 Should Be Followed.A List Should Be Pasted On Each Box Showing Purchase Order No, Pl No. , Description, Drg / Spec No, Qty, Firm Name & Address, Date Of Dispatch Etc.

Refer document

INR 825530.0 /-

Refer document

	0	1	2	3	4	5	6	7	8	9
0	S.No.	PL Code\r(Group)	Item Type\rGST(Y/N)	Stock /\rNonStock	Ordering	Consider\rFor Eval	Approving\rAgency	Inspection\rAgency	Currency\rAllowed	Estimated\rRate
1	1	33600430	Goods (Y)	Stock	---	Yes		RITES	INR
2		Description :TRANSVERSE UPPER BERTH, UPHOLSTERY TO RDSO SPEC. # RDSO/2008/CG-07 REV-\rNIL WITH AMENDMENT SLIP No-4,COLOUR SHADE & PATTERN -ALNAC-03.CUSHIONING MATERIAL TO\rRDSO SPEC. # C-K607 REV-02., as per Drawing: MI006651 ALT a, Packing Instruction: SEAT AND BERTH:\rALL PROTRUDING PORTIONS OF SEAT/BERTH SHOULD BE PROTECTED WITH ENVIRONMENT\rFRIENDLY PRE MOULDED THERMOCOL CAP OF REQUISITE STRENGTH OR SILICON RUBBER CAP\rAS AN ALTERNATE OPTION . EACH INDIVIDUAL SEAT/BERTH SHOULD BE COVERED WITH\rBIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THICKNESS 30 MICRON ALL ROUND.\rFLAP OF BERTH SHOULD BE OUTSIDE THE BIODEGRADABLE BUBBLE SHEET PACKING LEAVING\rSEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE PROPERLY WRAPPED ALL ROUND IN\rTHICK LAMINATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE COMPLETE ASSEMBLY SHOULD\rBE TIED WITH SUITABLE NYLON STRIPS. IT IS FURTHER WRAPPED WITH BIODEGRADABLE\rPOLYTHENE ALL ROUND TO PREVENT INGRESS OF DUST/WATER. FOR THE FOLLOWING ITEMS\r(WHEN COVERED UNDER SEAT AND BERTH SET) THE ITEM-WISE PACKING INSTRUCTION (LATEST\rVERSION) WILL BE AS UNDER: FOR PACKING OF CHAIR ANGLES, EXPANDED METAL PARTITION\rFRAME, SUSPENSION STRAPS, SUPPORTS AND MOUNTING BRACKET THE PACKING INSTRUCTION\rNO. PI004 SHOULD BE FOLLOWED. FOR PACKING OF HARDWARE ITEMS THE PACKING\rINSTRUCTION NO. PI019 SHOULD BE FOLLOWED. FOR PACKING OF ACCESSORIES LIKE BEARING\rBRACKET, CHAIN BRACKET, CATCH ARGGT, HINGE BRACKET AND SLEEVES ETC. THE PACKING\rINSTRUCTION NO. PI020 SHOULD BE FOLLOWED. FOR PACKING OF LADDERS, THE PACKING\rINSTRUCTION NO. PI031 SHOULD BE FOLLOWED. FOR PACKING OF LUGGAGE RACKS THE PACKING\rINSTRUCTION NO. PI042 SHOULD BE FOLLOWED.A LIST SHOULD BE PASTED ON EACH BOX\rSHOWING PURCHASE ORDER NO, PL NO. , DESCRIPTION, DRG / SPEC NO, QTY, FIRM NAME &\rADDRESS, DATE OF DISPATCH ETC.
3		Consignee	FURNISHING DEPOT	Punjab	4138.00 Numbers