Installation Of Stage Light , Stage Craft And Audio System In Auditorium Building At Jap 1 , Doranda In The District Of Ranchi

Tender Notice

24158155
Installation Of Stage Light , Stage Craft And Audio System In Auditorium Building At Jap 1 , Doranda In The District Of Ranchi
Indian
Jharkhand
26-05-2020
10-06-2020
12-06-2020

Tender Details

Installation Of Stage Light , Stage Craft And Audio System In Auditorium Building At Jap 1 , Doranda In The District Of Ranchi

Corrigendum Details

Sr No CorrigendumDate Description Submission Date
1 14-04-2020 Revise the tender date 13-05-2020
2 11-05-2020 Date revised 27-05-2020
3 26-05-2020 Tender date 10-06-2020

Key Value

Document Fees
INR 10000 /-
EMD
INR 131000.00 /-
Tender Value
INR 65.46 Lakhs /-

BOQ Items

Name of Work: Installation of Stage Light, Stage Craft and Audio System in Auditorium Building at JAP - 1, Doranda in the district of Ranchi.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Section- I Stage Light & Stage Craft 1
2 2 SITC of 100W High Quality LED Zoom Parcan Light complete with, COB Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 DmX 512 dimming with 3 channel control Beam Angle of 11 to 35 Degree Total Power Consumption of 120W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR or 3 Pin XLR for DmX Black powder coated body. Make: Leksa Lighting / Desisti / Altman / Arri 2 10 Nos.
3 3 SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of imming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 9080 suitable to illuminate the key presentor or talent on stage. Make: Leksa Lighting / Desisti / Altman / Arri 3 1 Nos.
4 4 SITC of 200W LED Blinder Light 30 Degree complete with Active Cooling with Low Noise Fan 5 Pin XLR or 3 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. Make: Leksa Lighting / Desisti / Altman / Arri 3200K CCT 2x100W Chip On Board LED Lamp source DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 DegreeTotal Power Consumption of 220W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections 4 10 Nos.
5 5 SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady color No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing\nRigidly built pressure die-casted Aluminium body LED Easy view display, Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections\nTotal Power Consumption of 180W Sound Active Mode Control, IP20 protection. Make: Leksa Lighting / Desisti / Altman / Arri 5 4 Nos.
6 6 SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. Make: Leksa Lighting / Desisti / Altman / Arri 6 12 Nos.
7 7 SITC of 200W High Quality LED PC Light complete with,\n11.7KHz Refresh Rate Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR or 3 Pin XLR for DmX Black powder coated body. Make: Leksa Lighting / Desisti / Altman / Arri\nCOB Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 DmX 512 dimming with 5 channel control\nMotorised Zoom Beam angle variable from 14 Degree to 45 Degree Total Power Consumption of 210W High quality output replacing 1000W Halogen PC Light Flicker Free 100% for Tv & Film Cameras 7 2 Nos.
8 8 SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD Make: Leksa Lighting / Desisti / Altman / Arri 8 39 Nos.
9 9 SITC of Light Fixture dual safety Chain made up of GI wire rope\nBundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip Make: Leksa Lighting / Desisti / Altman / Arri 9 39 Nos.
10 10 SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish Suitable to hold various type grid & other rigging systems. Make: Stage Technologies / Leksa Lighting / Stage Craft 10 30 Nos.
11 11 SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint\nMake: Stage Technologies / Leksa Lighting / Stage Craft 11 60 Mtrs
12 12 SITC of On stage Fixed Lighting Bar 17 Mtrs Length Straight as per the design Made out of 48mm Outer Dai, 40 Nominal Bore Mild Steel Pipe Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions End Caps on the Pipe end Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures Make: Stage Technologies / Leksa Lighting / Stage Craft 12 3 Nos.
13 13 SITC of Fixed FOH Lighting Bar 19.5 Mtrs Length Straight as\nper the design Made out of 48mm Outer Dai, 40 Nominal Bore\nMild Steel Pipe Dual Barrel Arrangement Dual Construction\nPowder coated with Matt black Texture Fixing Through Suspenders as per site conditions End Caps on the Pipe end\nUpper pipe of dual construction is used to anchor the bar\nlower pipe is effectively used to hang the light fixtures\nMake: Stage Technologies / Leksa Lighting / Stage Craft 13 1 Nos.
14 14 SITC of Fixed On Stage side Lighting Bar 6 Mtrs Length\nStraight as per the design Made out of 48mm Outer Dai, 40 Nominal Bore Mild Steel Pipe Dual Barrel Arrangement Dual Construction Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions End Caps on the Pipe end Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures\nMake: Stage Technologies / Leksa Lighting / Stage Craft 14 2 Nos.
15 15 SITC of Power Distribution Electrical panel having a Incomer of 125A, floor mount / rack mount / wall mount Nuetral separation made using incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 43 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Provided with ivery connectors for the internal terminations and external outgoing connecting points Custom built as per specification and project requirement.\nMake: Seimens / Leksa Lighting / L&T 15 1 Nos.
16 16 SITC of High quality power junction box 4 way made up of\nMS Sheet metal fabricated housing black powder coated,\nfibre glands of suitable size fitted with Powercon or IEC\nconnector Box 10A.\nMake: Stage Technologies / Leksa Lighting / Stage Craft 16 43 Nos.
17 17 SITC of High quality Dimming In junction box 1 way made up\nof MS Sheet metal fabricated housing black powder coated,\nfibre glands of suitable size fitted with 5 Pin DmX XLR Female\nsocket\nMake: Amphenol / Nuetrick / Leksa Lighting 17 1 Nos.
18 18 SITC of High quality Dimming Out junction box 1 way made\nup of MS Sheet metal fabricated housing black powder\ncoated, fibre glands of suitable size fitted with 5 Pin DmX XLR\nMale socket.\nMake: Amphenol / Nuetrick / Leksa Lighting 18 10 Nos.
19 19 SITC of Internal Earthing System with copper bare\nconductors all along the cable trays, metal parts and\nInstallation Hardwares 19 1 Nos.
20 20 SITC of Black Powder coated cable trays made out of MS\nSheet fabricated for a size of 150mm with perforation for\nheat dessipation provided with lid. Make: Custom 20 20 Mtrs
21 21 SITC of Black Powder coated cable trays made out of MS\nSheet fabricated for a size of 75mm with perforation for\nheat dessipation provided with lid. Make: Custom 21 120 Mtrs
22 22 SITC of DmX Male Female Connectors 5 Pin having rubber\nsheeth protection for Cross connecting DmX wiring\nconnections\nMake: Amphenol / Nuetrick / LL 22 20 Nos.
23 23 SITC of DmX Male Termination Connector 5 Pin soldered\nwith required capacity of resistor for signal deframing\nMake: Amphenol / Nuetrick / LL 23 16 Nos.
24 24 SITC of DmX Controller consits of 24 Physical Faders to control atleast 96 channels 4 Individual page control switches\nMaster control fader Black out mode Scene saving option upto 96 memories LCD display Smooth movement faders Easy access key pads DmX 512 protocol, 5 Pin XLR Output Optional chase & multifunction keys Sequence mode select\nMake: Lite Puter/ Leksa Lighting/ Avolite 24 1 Nos.
25 25 SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8 Isolated outputs Slow blow safety fuse\n5 Pin XLR for output interface Dual mode to select 2 universe operation DmX Input through 5 Pin XLR Connector Powder coated compartment finish Mounting brackets for grid mount.\nMake: Lite Puter/ Leksa Lighting/ Elation 25 2 Nos.
26 26 SITC of Motor Control Panel cum remote control 1 Way\nproviding power input for curtain motors internally neatly\nwired with contactors having individual motor control with\nrequired Push button, Emergency trip, RYB indicators, Supply\nIndictor and necessary meters. Motor control panel duly\npowder coated with ash grey paint texture finish with all\nrequired safety features\nMake: Seimens / Leksa Lighting / Elmex 26 1 Nos.
27 27 SITC of Cable Connecting Circuit Boxes for the termination of\ncables from Electrical panel to the grid level point made out\nof MS Sheet metal fabricated housing duly powder coated\nwith matt black texture finish paint, fitted with required\nchannels and ivery connectors, necessary glands etc.\nMake: Seimens / Leksa Lighting / Elmex 27 1 Nos.
28 28 SITC of 43-way Power Marhalling Box made up of MS Sheet\nmetal fabricated housing black powder coated and ivery\nconnectors for the internal terminations and external\noutgoing connecting points, fibre / brass glands of suitable\nsize. Make: Custom 28 1 Lot
29 29 SITC of FRLS Copper unarmoured Flexible cable having 12\nCore each of 1.5 Sq mm size.\nMake: Polycab / Walna / SBEE 29 130 Mtrs
30 30 SITC of FRLS Copper unarmoured Flexible cable having 3\nCore each of 1.5 Sq mm size.\nMake: Polycab / Walna / SBEE 30 750 Mtrs
31 31 SITC of 5 Core DmX Cable with Sheathed housing on the\ncable, well designed insulation, low noise suitable to\ntransmet DmX signal.\nMake: Falcon / Belden / Guru Astronics 31 250 Mtrs
32 32 SITC of On Stage Fixed Frill Bar 18 Mtrs Length Straight as per\nthe design made out of 40NB 48 OD Mild steel pipe dual\nbarrel, supported to hang the frill, connected with MS Flat\nduly powder coated with matt black texture finish paint.\nMake: Stage Technologies / Leksa Lighting / Stage Craft 32 2 Nos.
33 33 SITC of Glazzed Cotton fabric as per approved colour and\nmake with a gathering of 0% stitched as per site condition,\ncurtain provided with eyelets at every 200/250mm for\nuniform fixing on to curtain trollies (For Frills) Size: 18Mtr x 1Mtr.\nMake: Om Phile / Mayur / Raymonds / Comrade 33 2 Nos
34 34 SITC of On Stage Fixed Valance Bar 22.5 Mtrs Length Straight\nas per the design made out of 40NB 48 OD Mild steel pipe\ndual barrel, supported to hang the Main Valance of the stage\nsystem duly powder coated with matt black texture finish\npaint.\nMake: Stage Technologies / Leksa Lighting / Stage Craft 34 1 Nos
35 35 SITC of High quality Velvet fabric as per approved colour and\nmake with a gathering of 50% stitched as per site condition,\ncurtain provided with eyelets at every 200/250mm for\nuniform fixing on to curtain trollies (For Main Valance) Size:\n22.5Mtr x 1.2Mtr. Make: Om Phile / Mayur / Raymonds /\nComrade 35 1 Nos
36 36 SITC of Motorized Main Curtain 23.5 Mtrs straight\nCentre partting as per design Made up of I Track for complete length Overlap of 0.5~0.9 Mtrs. Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Motor Cable termination box Drive unit with suitable capacity of motor unit, GI Wire rope. Black texture finish paint. All metal parts are powder coated\nMake: Stage Technologies / Leksa Lighting / Stage Craft 36 1 Nos
37 37 SITC of High quality Velvet fabric as per approved colour and\nmake with a gathering of 50% stitched as per site condition,\ncurtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:23.5Mtr x 5.1 Mtr.\nMake: Om Phile / Mayur / Raymonds / Comrade 37 1 Nos
38 38 SITC of Fixed Rear Curtain 23.5 Mtrs straight Centre partting as per design Made up of I Track for complete length Overlap of 0.5~0.9 Mtrs. Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Suspension through Suspenders as per site conditions 2 Wheeler trolly for curtain moment All metal parts are powder coated Black texture finish paint.\nMake: Stage Technologies / Leksa Lighting / Stage Craft 38 1 Nos
39 39 SITC of Glazzed Cotton fabric as per approved colour and\nmake with a gathering of 50% stitched as per site condition,\ncurtain provided with eyelets at every 200/250mm for\nuniform fixing on to curtain trollies (For Rear Curtain) Size:\n23.5Mtr x 5.1 Mtr.\nMake: Om Phile / Mayur / Raymonds / Comrade 39 1 Nos
40 40 SITC of Fixed Wing arrangement designed as per site\ncondition, provided with pivoted track or pipe arrangement 2\nmtr, duly powder coated with matt black finish, required\nhardware’s and weight for fabric cotton.\nMake: Stage Technologies / Leksa Lighting / Stage Craft 40 4 Nos
41 41 SITC of Glazzed Cotton fabric as per approved colour and\nmake with a gathering of 0% stitched as per site condition,\ncurtain provided with eyelets at every 200/250mm for\nuniform fixing. (For Wing) 5.1Mtr x 2Mtr\nMake: Om Phile / Mayur / Raymonds / Comrade 41 4 Nos
42 42 SITC of FRLS Copper unarmoured Flexible cable having 7\nCore each of 1.5 Sq mm size.\nMake: Polycab / Walna / SBEE 42 35 Mtrs
43 43 SITC of FRLS Copper unarmoured Flexible cable having 4\nCore each of 4 Sq mm size.\nMake: Polycab / Walna / SBEE 43 25 Mtrs
44 44 Audio System 44
45 45 High Power 2-Way Loudspeaker with 1 x 15" LF & 90° x 50° Coverage,Frequency Range1, (-10 dB): 34 Hz – 20 kHz Frequency Response1, (±3 dB): 40 Hz – 20 kHz,Coverage Pattern: 90° x 50°, rotatable waveguide, Directivity Factor (Q): 11.0,Directivity Index (DI): 10.4 dB,Crossover Modes: Bi-amp/Passive switchable, Passive Crossover Frequency2: 1.2 kHz Transducer Power Rating (AES)3: LF: 1000 W (4000 W peak), 2 hrs, 750 W (3000 W peak), 100 hrs,HF: 100 W (400 W peak), 2 hrs,Long-Term System Power Rating (IEC)4: Passive mode: 600 W (2400 W peak), 100 hrs,Maximum SPL5: Bi-amp mode: LF: 128 dB-SPL cont avg (134 dB peak),HF: 133 dB-SPL cont avg (139 dB peak),Passive mode:124 dBSPL cont avg (130 dB peak),System Sensitivity 6,(1W @ 1m): Passive mode: 96 dB SPL Transducers:Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in.) Differential Drive, driver with 75 mm (3 in)dual voice coil Nominal Impedance: 8 ohms, Sensitivity 6, (1W @ 1m, 98 dB SPL within operational band):High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil, Nominal Impedance: 8 ohms,Sensitivity6 (1W @ 1m): 113 dB SPL \nMake - JBL/L-Acoustics/D&B 45 2 Nos
46 46 High Power 2-Way Loudspeaker with 1 x 15" LF & 60° x 40° Coverage, Rotatable Horn Frequency Range1,(-10 dB): 34 Hz – 20 kHz, Frequency Response1,(±3 dB): 40 Hz – 18 kHz, Coverage Pattern: 60° x 40°, rotatable waveguide, Directivity Factor (Q): 18.1, Directivity Index (DI): 12.6 dB,Crossover Modes: Bi-amp/Passive switchable,Passive Crossover Frequency2: 1.8 kHz, Transducer Power Rating (AES)3: LF: 1000 W (4000 W peak), 2 hrs, 750 W (3000 W peak), 100 hrs,HF: 100 W (400 W peak), 2 hrs,Long-Term System Power Rating (IEC)4: Passive mode: 600 W (2400 W peak), 100 hrs,Maximum SPL5: Bi-amp mode: LF: 128 dB-SPL cont avg (134 dB peak)HF: 135 dB-SPL cont avg (141 dB peak),Passive mode:124 dB-SPL cont avg (130 dB peak), System Sensitivity6,(1W @ 1m): Passive mode: 96 dB SPL\nMake - JBL/L-Acoustics/D&B 46 2 Nos
47 47 Custom Made Mounting Arrangement - Array Frame / Eye bolt kit etc. Make - Custom 47 2 Nos
48 48 Multichannel Digital Network Based Power Amplifier with Power output 4 x 1200W @ 8 ohms - Channels-4,Sensitivity (for full rated power at 8 ohms) 0.7V RMS, Rated Power Output (per channel @ 4 ohms) 1200W, Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms) > 104dB,THD (full rated power, 20 Hz - 20 kHz) 0.35%,Damping Factor (20 Hz to 100 Hz) > 1000,Frequency Response (8O, 20 Hz - 20 kHz) +/ 0.25dB,Crosstalk (below rated power) 20 Hz to 1 kHz > 80dB,Input Impedance (nominally balanced, nominally unbalanced) 20 kO balanced, 10 kO unblanced, Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion) 19 x 3.5 x 14.71,Weight 20.1 lbs (9.12 kg),Power Supply Connector "20A IEC connector, 100 – 240V"\nMake - Crown/Labgruppen/Powesoft 48 1 Nos
49 49 Compact High Power Subwoofer with 1 x 15" Driver-Frequency Range (-10 dB) 32 Hz -1 kHz Frequency Response (± 3 dB) 42 Hz - 1 kHz,Transducer Power Rating 800 W (3200 Wpeak), 2 hrs.Long-Term System,Power Rating 675 W (2700 W peak), 100hrs.Maximum SPL (1m) 35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak),System Sensitivity 35 Hz - 400 Hz: 97 dB-SPL, 1W (2.83V) @ 1m,Nominal Impedance 8ohms,Low Frequency Driver 1 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive driver, Enclosure Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood,Suspension Attachment 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware,Finish Black DuraFlex finish. White available upon request.,Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.Input Connector NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.Environmental Specifications Mil-Std 810; IP-x3 per IEC529.Dimensions (H x W x D invertical cabinet orientation) 483 x 419 x 597 mm(19.0 x 16.5 x 23.5 in),Net Weight 20.6 kg (45.5 lb),Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers.\nMake - JBL/L-Acoustics/D&B 49 2 Nos
50 50 Eye bolt Kit for above Loudpseaker / Subwoofer System\nMake - JBL/L-Acoustics/D&B 50 1 Nos
51 51 Dual channel Digital Network Based Power Amplifier with Power output 4 x 1200W @ 8 ohms-Sensitivity (for full rated power at 8 ohms) 0.7V RMS,Rated Power Output (per channel @ 4 ohms) 1200W,Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms) > 104dB,THD (full rated power, 20 Hz - 20 kHz) 0.35%,Damping Factor (20 Hz to 100 Hz) > 1000,Frequency Response (8O, 20 Hz - 20 kHz) +/-0.25dB,Crosstalk (below rated power) 20 Hz to 1 kHz > 80dB, Input Impedance (nominally balanced, nominally unbalanced) 20 kO balanced, 10 kO unblanced,Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion) 19 x 3.5 x 14.71,Weight 17.2 lbs (7.8 kg),Power Supply Connector "15A IEC connector, 100 – 240V "\nMake - Crown/Labgruppen/Powesoft 51 1 Nos
52 52 Loud speaker with 1000 W highly efficient & Maximum SPL Output: 126dB, System Type: Self powered 12”, two-way, bass-reflex Frequency Range (-10dB): 48Hz - 20kHz,Frequency Response (- 3dB): 57Hz - 20kHz, Coverage Pattern: 100 x 60 System Type: Self powered 12”, two-way, bass-reflex,Maximum SPL Output: 126 dB, Frequency Range (-10 dB): 48Hz – 20kHz, Frequency Response (-3 dB): 57Hz – 20kHz, System Power Rating: 1000W Peak (700 LF + 300HF); 500W, Continuous (350W LF + 150W HF), Input Impedance: 20k (balanced), Line Input Gain: Infinity to 26.8 dBu, Mic Input Gain: Infinity to 29 dBu. Make - JBL/L-Acoustics/D&B 52 2 Nos
53 53 Advanced Feedback SuppressionInput Connectors Female XLR and 1/4” TRS,Input Type Electronically balanced/ unbalanced, RF filtered,Input Impedance Balanced\n50kO, Unbalanced 25kO,Max input line level +20 dBu,CMRR > 40dB, typically >55dB @ 1kHz,Number of Outputs 2\nOutput Connectors Male XLR and 1/4” TRS,Output Type Electronically balanced/unbalanced, RF filtered,Output Impedance Balanced >120 O, Unbalanced >60 O,Max Output Level +20 dBu A/D Converter dbx Type IV Conversion System,A/D Dynamic Range >113 dB Aweighted, >110 dB unweighted, 22kHz BW,Type IV Dynamic Range >119 dB, Aweighted, 22kHz BW; >117 dB, unweighted, 22kHz BW,A/D Conversion 24-bit,Sample Rate 48kHz,D/A Dynamic Range 112 dB A-weighted, 109 dB unweighted,D/A Conversion 24-bit,Dynamic Range 109 dB A-weighted, 106 dB unweighted, 22kHz BW,THD+Noise 0.003% typical at +4 dBu, 1 kHz,Frequency Response 20Hz – 20kHz, +/- 0.5dB,Interchannel Crosstalk >80 dB typical,Crosstalk input to output >80 dB\nOperating Voltage 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz,Power Consumption 9 W Unit Weight 4.5 lbs. (2.04 kg),Dimensions 1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x\n14.6cm (D) x 48.26cm (W)\nMake - dbx/L-Acoustics/D&B 53 1 Nos
54 54 Two Way Loudspeaker with 1 x 8" LF Driver; Coverage 120 deg. (H) x 60 deg. (V)- Frequency Range 52 Hz - 20 kHz (-10 dB),Frequency Response 63 Hz – 19 kHz (±3 dB),Power Rating 250W Cont. Pink Noise,500W Program,1000W Peak,Impedance 8 ohms,Coverage Pattern /26: 120° x 60°/95: 90° x 0°,Dimensions (H X W X D) 469.9 x 237.5 x 254.0 mm,(18.5 x 9.4 x 10.0 in), Weight 12.8 kg (28.2 lb) Make - JBL/L-Acoustics/D&B 54 4 Nos
55 55 Wall Mount Bracket for above Loudspeaker Frequency Range 52 Hz - 20 kHz (-10 dB),Frequency Response 63 Hz – 19 kHz (±3 dB),Power Rating 250W Cont. Pink Noise, 500W rogram,1000W Peak,Impedance 8 ohms,Coverage Pattern /26: 120° x 60°/95: 90° x 50° Dimensions,(H X W X D) 469.9 x 237.5 x 254.0 mm,(18.5 x 9.4 x 10.0 in),Weight 12.8kg (28.2 lb).\nMake - JBL/L-Acoustics/D&B 55 4 Nos
56 56 Custom Made Mounting ArrangEment\nMake - Custom 56 4 Nos
57 57 Multichannel Digital Power Amplifier with Power output 4 x 600W @ 4 ohmsChannels 4 Sensitivity (for full rated power at 8 ohms) 0.7V RMS,Rated Power Output (per channel @ 4 ohms) 600W,Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms) > 104dB,THD (full rated power, 20 Hz - 20 kHz) 0.35%,Damping Factor (20 Hz to 100 Hz) > 1000,Frequency Response (8O, 20 Hz - 20 kHz) +/-0.25dB, Crosstalk (below rated power) 20 Hz to 1 kHz > 80dB,Input Impedance (nominally balanced, nominally unbalanced) 20 kO balanced, 10 kO unblanced,Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion) 19 x 3.5 x 12.25,Weight 16.3 lbs (7.39 kg),Power Supply Connector "15A IEC connector, 100 – 240V "\nMake - Crown/Labgruppen/Powesoft 57 1 Nos
58 58 Wall Mount Loudspeaker Frequency Range (-10 dB) 70 Hz to 20 kHz,Frequency Response (+/-3 dB) 95 Hz - 19 kHz,Power Rating 100W Continuous Program (2 hrs),50 W (200W peak), Continuous Pink Noise (2 hrs) 40 W (160W peak) Continuous Pink Noise (100 hrs),Maximum Input Voltage 17.2 V RMS (2 hrs), 34.4 V peakMaximum SPL 103 dB ave. Continuous Pink Noise (109 dB peak),Sensitivity 86 dB, 1W/1m (ave. 100 Hz – 10 kHz),Coverage Angle 100° x 100°,Directivity Factor (Q) 5.8 (averaged 1kHz – 16kHz),Directivity Index (DI) 7.2 dB\n(averaged 1kHz – 16kHz),Nominal Impedance 8 ohms (THRU setting),Crossover Type 2nd order low-pass, 2nd order high-pass,Transformer Taps 70V: 15W, 7.5W, 3.7W, 1.8W,100V: 15W, 7.5W, 3.7W Insertion Loss <0.43 dB at any tap setting,Thru Setting: 8O nominalRecommended Protective High-Pass 70 Hz high-pass (24 dB/oct) (for 8O operation and for all 70V/100V taps settings).Low Frequency Driver 76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton™ voice coil former, high-temp voice coil wire, optimized cone geometry, Dimensions (H x W x D) 200 x 141 x 111 mm (7.9 x 5.6 x 4.4 in); 141 mm (5.6 in) deep total when mounted on InvisiBall wall-mount bracket. Net Weight 1.8 kg (4.0 lbs)\nMake - JBL/L-Acoustics/D&B\n 58 2 Nos
59 59 Dual Channel Power AmpllfiierPower Output 40W/80W/120W ,Output Channels 2,Input Sensitivity 1.4Vrms for 8-ohms. Phantom Power 27VDC,AC Line Voltage 100 - 240V, 50/60 Hz,Input Impedance 20K ohms/50K ohms,Dimensions 1.75” x 8.5” x 12” (44.45mm x 215.9mm x 304.8mm),Included Accessories Rack mounting kit\nMake - JBL/L-Acoustics/D&B 59 1 Nos
60 60 Wired Gooseneck Microphone with Desktop base unit and on/off switch for Podium Polar pattern Cardioid,Frequency range 70 to 18,000 Hz,Max. SPL 125 dB (for 1%THD),Equivalent noise level <21 dB-A Signal/noise ratio (A-weighted) >73 dB ,Impedance <=600 ohms,Recommended load impedance >=2,000 ohms,Supply voltage 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated),Powering <3 mAConnector 3-pin male XLR,Finish matte black,Length Microphone 50cm,Gross weight (in gram) 960 Net weight (in gram) 1010,Box dimensions (in cm) length 55,Box dimensions (in cm)\nwidth 15 Box dimensions (in cm) heigth 15,Box volume (in cm3) 1,125\nMake - AKG/Bayerdynamic/Audiotechnica 60 1 Nos
61 61 Wireless Handheld Microphone System Polar pattern Cardioid,Frequency range 70 to 18,000 Hz Max. SPL 125 dB (for 1% THD),Equivalent noise level <21 dB-A,Signal/noise ratio (Aweighted) >73 dB Impedance <=600 ohms.Recommended load impedance >=2,000 ohms,Supply voltage 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated) Powering <3 mA,Connector 3-pin male XLR Finish matte black Length Microphone 50cm Gross weight (in gram) 960,Net weight (in gram) 1010 Box dimensions (in cm) length 55,Box dimensions (in cm) width 15 Box dimensions (in cm) heigth 15.Box volume (in cm3) 1,125\nMake - AKG/Bayerdynamic/Audiotechnica 61 1 Nos
62 62 Wireless Lavalier Microphone System Carrier frequency range500.1 MHz – 864.9 MHz,Switching bandwidth30.5 MHz (depending on local regulations),ModulationFM (Frequency Modulation),Audio bandwidth35 to 20,000 Hz,Signal to Noise120 dB-A\nMake - AKG/Bayerdynamic/Audiotechnica 62 1 Nos
63 63 4 Way Antenna Power Splitter Carrier range: 470 to 952 MHz,Attenuation: 0, 2, 4, 6, 8, 10, 12, 14 dB switchable,RF inputs: 2 x BNC sockets, 50 Ohm,RF outputs: 10 x BNC\nsockets, 50 Ohm,Power requirement: 12 VDC / 5A,Rack size: ½ Racksize (19”),Dimensions: 200 x 190 x 44 mm (7.8 x 7.5 x 1.7 in),Weight: approx.. 970 g (2.2 lbs.)Item numbers: 3296Z00010 - APS4 without power supply.3296Z00020 - APS4 / EU power supply,3296Z00030 - APS4 / US power supply,3296Z00040 - APS4 / UK power supply\nMake - AKG/Bayerdynamic/Audiotechnica\n 63 1 Nos
64 64 External Wideband Omnidirectional Active RF Antenna System The RA4000 B/EW is an active omnidirectional wide-band UHF receiving antenna for use with wireless microphone systems. It operates in a frequency range from 470MHz to 952MHz, providing a covering angle of 360° and a total gain of 18dB. The RA4000 B/EW has a built-in amplifier to compensate long cable runs. With dedicated antenna components, it works for cable lengths up to 300m. The RA4000 B/EW is remotely\npowered through the antenna cable. The antenna has waterproof construction and can be used for indoor and outdoor applications. Using the included universal stand\nadapter, the RA4000 B/EW can be mounted on floor stands with 3/8" or 5/8" screws.\nMake - AKG/Bayerdynamic/Audiotechnica 64 2 Nos
65 65 Antenna Cable - 20 meters \nMake - AKG/Bayerdynamic/Audiotechnica 65 4 Nos
66 66 Wired Dynamic Vocal Microphone MICROPHONE, Microphone Technologydynamic,Microphone Operation Modemono Connectivity TechnologyWired,Sensitivity-52 dBV/Pascal,Frequency Response70 Hz Noise Level18\ndBA,Max Sound Pressure156 dB Audio Input DetailsSuper cardioid - 70 - 20000 Hz ,REMOTE CONTROL,Typenone , MISCELLANEOUS, Colordark stage blue,Color Category black, gray ,Body Materialdie-cast zinc, metal wire, spring steel,Included Accessoriesmicrophone stand adapter, storage bag.DIMENSIONS & WEIGHT,Diameter2 in,Length7.3 in,Weight11.29 oz HEADER,Recommended Useprofessional audio,Specific Applicationsvocal,Microphone Technology dynamic.Microphone Operation Modemono,Connectivity\nTechnologywired,Sensitivity-52 dBV/PascalFrequency Response70 Hz,Noise Level18 dBA,Max Sound Pressure156 dB\nMake - AKG/Bayerdynamic/Audiotechnica 66 1 Nos
67 67 40 Input Digital Mixing Console Up to 80 channels to mix,32 Mic Inputs,8 XLR/1/4" Combi-jacks for line inputs and instruments 40 DSP input channels (32 mono inputs and 4 stereo channels/returns),31 Output busses (All with full DSP processing and GEQ) 4-band Fully Parametric EQ on each channel and bus,8 VCAs + 8 Mute groups,26 motorised faders (24 input + LR/Mono) 4 fully customisable Fader Layers,Built-in Stagebox Connectivity,5" touchscreen display,Multi-Colour LCD Channel Displays on each input fader,4 studio-grade\nLexicon Effects engines and dedicated FX busses,BSS Graphic Equalisers on every bus,20 sub-group / aux busses 4 mono /stereo matrix busses\nMake - Soundcraft/Allen & Heath/Alto Live 67 1 Nos
68 68 16 Channel Digital Stage box\nMake - Soundcraft/Allen & Heath/Alto Live 68 1 Nos
69 69 Control Room head phone for FOH Monitoring ,\nMake - AKG/Bayerdynamic/Audiotechnica 69 1 Nos
70 70 Powered loudspeaker for Control Room Monitor Loudspeakers 70 1 Nos
71 71 Mounting Bracket for above loudspeakers\nMake - JBL/L-Acoustics/D&B 71 1 Nos
72 72 12 x 8 Digital Signal Processor with AEC\nMake - BSS/QSC/Biamp 72 1 Nos
73 73 Eight Output channel Expansion unit\nMake - BSS/QSC/Biamp 73 1 Nos
74 74 Active DI Box for Analog Audio connectivity Stackable Chassis with Durable Rubber Foot,Gold-plated Neutrik XLR Connector Premium Chrome Toggle Switches Hi-Z 1/4"\nInput Jack Parallel 1/4" Thru Jack,Transformer Isolated Premium Shielded Custom dbx Transformer,Balanced XLR Lo-Z Output,3-Way 0/20/40 dB Pad Switch Flat/High- Cut Filter Switch,Output Polarity Invert Switch,Ground Lift Switch\nMake - dbx/Behringer/Shure 74 2 Nos
75 75 Network Switch - as per site requirement\nMake - NETGEAR/JUNIPER/CISCO 75 1 Lot
76 76 Professional 19" Equipment Rack for housing AV devices, with all require accessories\nMake - VALRACK/NETRACK/APW 76 1 Nos
77 77 AV Cables and Mic Stands\nMake - Krystal/Sommer/Finolex 77 1 Lot
78 78 Required Connectors & accessories 78 1 Lot
79 79 Installation, Cabling and Commissiong Charges 79 1 Job
80 80 Programming Charges 80 1 Job
81 81 Add 1% Lebour Cess 81 1 Nos
82 82 Add 12% GST 82 1 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail