}

Providing Pa Audio System At Sri Chamunda Nandikeshwer Temple Chamunda Under The Scheme Of Financial Assistance For Creation Of Culture Infrastructure Distt . Kangra Hp . , Sri Chamunda G-Himachal Pradesh

Public Works Department-PWD has published Providing Pa Audio System At Sri Chamunda Nandikeshwer Temple Chamunda Under The Scheme Of Financial Assistance For Creation Of Culture Infrastructure Distt . Kangra Hp . . Submission Date for this Tender is 30-01-2020. Audio Video Equipment Tenders in Sri Chamunda G Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

23257118
Providing Pa Audio System At Sri Chamunda Nandikeshwer Temple Chamunda Under The Scheme Of Financial Assistance For Creation Of Culture Infrastructure Distt . Kangra Hp .
Open Tender
Indian
Himachal Pradesh
Sri Chamunda G
30-01-2020

Tender Details

Providing Pa Audio System At Sri Chamunda Nandikeshwer Temple Chamunda Under The Scheme Of Financial Assistance For Creation Of Culture Infrastructure Distt . Kangra Hp .

Key Value

Document Fees
INR 1500 /-
EMD
INR 51930.0 /-
Tender Value
INR 29.61 Lakhs /-

BOQ Items

Name of Work: Providing PA/AUDIO System at SRI CHAMUNDA NANDIKESHWER TEMPLE CHAMUNDA under the scheme of financial assistance for creation of culture infrastructure Distt. KANGRA HP.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supply installation testing and commissioning of IP based EVAC PA controller three year on site warranty capable of adding 12 zones in the system and expandable upto 150 zones with 14x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support amplifier redundany, 12 speaker line outputs. 8000 fault, warning and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 18 control inputs and 19 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. The controllers shall be able to exchange audio signals over the network without the need of a running PC/server, .Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. Make: Bosch-Electrovoice /ATEIS/AEX/ /EAW/TOA as approoved by the Engineer incharge. 1 Nos
2 2 Supply installation testing and commissioning of 480 W power amplifier three year on site warranty, 70/100V loudspeaker output voltages, 2 selectable audio inputs , local input for audio source. THD =1%. Frequency response, ref. 1 kHz, rated load, -3 dB : 50 Hz to 20 kHz . Signal-to-noise ratio (A-weighted) >90 dB. Gain: 40 dB, Operating temperature : -10 ºC to +55 ºC , Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter, ground fault. protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output levels and low acoustic noise at lower output levels. Make: Bosch-Electrovoice /ATEIS/AEX/ /EAW/TOA as approoved by the Engineer incharge. 4 Nos
3 3 Supply installation testing and commissioning of Call Station three year on site warranty,with extension keypad to with minimum 15 programmable keys for Zone selection, source selection, level control, emergency on/off, message on/off, failure acknowledge/reset, Switching output trigger on/off or 0 to 10V, select scheduled events, scheduled event on/off. Multilanguage LC display(122 ? 32) pixel ,Five menu/function keys, gooseneck microphone with supervised electret microphone, pop shield and permanent monitoring, integrated loudspeaker for system sounds.The call station should havve the provision to be configured as a numeric keypad.Make: Bosch-Electrovoice /ATEIS/AEX/ /EAW/TOA as approoved by the Engineer incharge. 1 Nos
4 4 Supply Installation Testing and Commissioning of Digital Mixer three year on site warranty with 16 in with remote wireless control with wi-fi router(TP-Link/D-Link), & plug n play , multi track usb recorder, providing 18 channels of 48Khz, 24 bit recording& playbackstraight to & from your USB harddrive, usb audio straeming as per ISI specification and with BIS Registration Number and its validity Certifications marked as required compleate in all respect . Make: Bosch-Electrovoice/Allen & Heath/Yamaha as approoved by the Engineer incharge. 1 Nos
5 5 Supply Installation Testing and Commisioning of wireless Lapel Microphone with -32 preset channels, with compatible groups of eight (8) channels for simultaneous use14 hour battery life from two (2) AA alkaline batteries , Rugged metal transmitters with backlit LCD display and battery gaugeNumber of Channels: 32 Modulation: ± 40 kHz ,Diversity: True Antenna RF Sensitivity: <1.0 µV for 12 dB SINAD,Image Rejection: > 55 dB ,Squelch: Tone Code plus Amplitude,Frequency Response: 80 Hz – 18 kHz ± 2 dB,Balanced Output: 20 dBV (max @ 40 kHz deviation), Unbalanced Output: Adjustable 8 mV to 0.755V RMS,Distortion: < 1.0%, 0.4% typical,Signal-to-Noise Ratio: > 100 dB as per ISI specification and with BIS Registration Number and its validity Certifications marked as required compleate in all respect . Make: Bosch-Electrovoice /ATEIS/AEX/ /EAW/TOA as approoved by the Engineer incharge. 1 Nos
6 6 Supply Installation Testing and Commisioning of wireless handheld Microphone with three year on site warranty with -32 preset channels, compatible groups of eight (8) channels for simultaneous use14 hour battery life from two (2) AA alkaline batteries , Rugged metal transmitters with backlit LCD display and battery gaugeNumber of Channels: 32 Modulation: ± 40 kHz Diversity: True Antenna RF Sensitivity: <1.0 µV for 12 dB SINAD Image Rejection: > 55 dB Squelch: Tone Code plus Amplitude,Frequency Response: 80 Hz – 18 kHz ± 2 dB Balanced Output: 20 dBV (max @ 40 kHz deviation) Unbalanced Output: Adjustable 8 mV to 0.755V RMS Distortion: < 1.0%, 0.4% Signal-to-Noise Ratio: > 100 dB as per ISI specification and with BIS Registration Number and its validity Certifications marked as required compleate in all respect . \nMake: Bosch-Electrovoice /ATEIS/AEX/ /EAW/TOA as approoved by the Engineer incharge. 4 Nos
7 7 Supply installation testing and commissioning of 15W bi-directional Speaker with three year on site warranty having specification, Max Power: 15 W, Power Tapping: 10 / 5 / 2.5 W, Effective frequency range(-10 dB) :140 Hz to13 kHz ,Splash-waterproof, Sound pressure level at 10 W / 1 W (1 kHz, 1 m) : 102 dB / 92 dB, Opening Angle 1 KHz / 4 KHz (-6 dB):160° / 70°, Operating temperature -25 ºC to +55 ºC , Water protection acc. to EN 60529, IP 63.shall be with including with mounting kit and connecting junction box.Monkey meanace protection for speakar circular type according to the dia of speakar at both ends as per ISI specification and with BIS Registration Number and its validity Certifications marked as required compleate in all respect .Make: Bosch-Electrovoice /ATEIS/AEX/ /EAW/TOA as approoved by the Engineer incharge. 50 Nos
8 8 Supply installation testing and commissioning of two way full range speaker with Frequency response (-3 dB): 90 Hz - 20 kHz, Frequency response (-10 dB) 55 Hz - 20 kHz ,Sensitivity: 89 dB, Max SPL (calculated): 108 dB, 114 dB Peak ,Coverage angle: Horizontal 90°, Vertical 90°,Power handling: 75 W (300 W Peak) Continuous,Input transformer (70 V/100V):60 W, Low frequency transducer: 5.25 in (133 mm),High frequency transducer: 0.75 in (20 mm),Environmental: IP-65 (per IEC-60529) with all acccessories as per ISI specification and with BIS Registration Number and its validity Certifications marked as required compleate in all respect .Make: Bosch-Electrovoice /ATEIS/AEX/ /EAW/TOA as approoved by the Engineer incharge. 22 Nos
9 9 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required compleate in all respect. (Make:- Havells/ KEI/ polycab/Finolex/ Panduit) as approoved by the Engineer incharge. 300 Rm
10 10 Supply installation & testing of Cat 6 RJ45 Keystone Jacks-White Color complete in all respect to the entire satisfcation of engineer incharge .Make Huber+Suhner/Panduit/systimax as approoved by the Engineer incharge. 8 Nos
11 11 Supplying and fixing of following sizes of PVC conduit(Heavy Duty ISI) along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-. Make:Diplast/Polyfit/Polyindia/AKG/Finolex as approoved by the Engineer in charge.
12 11.01 25mm 300 Mtr
13 12 Providing and laying of HDPE Pipe 32mm PE-80,PN6 direct in ground; to be laid 75-100cm below the ground level for drawing of cables including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering,or G.I. conduit 32 mm dia( Heavy Duty) with concrete block 15cm X 15cm 1:2:4 with complete curing with splicing complete in all respect complete in all respect. Make: Jain/Harbal/Kishan as approoved by the Engineer incharge. 800 mtr
14 13 Supplying and erection of Galvanized Iron (G.I.) pipe pole 'A' quality of suitable length and dia. 4.47 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- 4 Meter long having nominal bore dia. 65 mm planting depth 80 cm with pit depth 95 cm. 21 each
15 14 Supply, Installation, Testing and Commissioning of 2 core 2.5 sq mm unleaded speaker cable PVC insulated, heat resistant, flame retardant (HRFR) and oil resistant cable in existing surface / recessed, Steel/PVC conduit/HDPE pipe as required compleate in all respect. (Make:- Havells/ KEI/ polycab/Finolex) as approoved by the Engineer incharge. 1700 mtr
16 15 Suppling installation testing and commissing of 6 KVA,192V DC singal phase online UPS model with inbuilt galvanic isolation transformer for 30 minute back-up with 16 nos 12 volt 42 AH SMF batteries (Quanta/Exide ),including MS Rack and battrey interconnector(1 phase in .1 phase out ) as required compleate in all respect.Make:Emersion Lebert/APC/Nummeric as approoved by the Engineer incharge. 1 each
17 16 Supply, Installation, Testing and Commissioning of table rack 42UX800X1000 with front glass door and rear door castor normal/brake fans 90CFM 230 VAc PDU horigental5X15AMP with 6 sockets with 16 Amp MCB and indicator with 3 mtr cable hardware front panel MTG earthing kit cable manager 1U/19" shelf Heavy duty for switch Mounting Kit etc. as per ISI specification and with BIS Registration Number and its validity Certifications marked as required compleate in all respect . (Make : APW /Netrack/ Comrack / Perfect Rack) as approoved by the Engineer incharge. 1 each
18 17 Supply, Installation, Testing and commissioning of PC Client Intel i7 processor (for workstation) 8th generation with clock speed- minimum 3.6GHz, RAM16 GB & Expandable. Window 10 professional 64 bit .21” LED full HD monitor. 4TB (For Workstations) With Read & Write functions. LAN Interface 10/100/1000 Mbps Ethernet. Mouse Optical, USB port at front Dual and dual monitor support as per ISI specification and with BIS Registration Number and its validity Certifications marked as required compleate in all respect . Make: HP/Dell/IBM as approoved by the Engineer incharge. 1 each
19 18 Supply, Installation, Testing and Commissioning of Monkey menance circular for GI Pole having 65mm dia and 3 feet length including painting compleate in all respect as approoved by the Engineer incharge.Make:Custom 21 each
20 19 Supply, Installation, Testing and Commissioning of Monkey menance circular type having 7" dia and 4"width including painting compleate in all respect as approoved by the Engineer incharge.Make:Custom 100 each
21 20 Supply, Installation, Testing and Commissioning of Monkey menance U type having 10.5"width and 8"deep including painting compleate in all respect as approoved by the Engineer incharge.Make:Custom 22 each
22 21 Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. 6 each
23 22 Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. 2 each
24 23 Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.Make:Havells/KEI/Polycab.as approoved by the Engineer incharge.
25 23.01 3x2.5 Sq. mm. 30 Meter
26 23.02 3x4.0 Sq. mm. 30 Meter
27 23.03 3x6.0 Sq. mm. 10 Meter
28 23.04 3x10.0 Sq. mm. 150 Meter
29 24 Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-
30 24.01 Single pole. Cat-A. L&T/Havelles/ABB. 12 each
31 25 Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-
32 25.01 Double pole. Cat-A.L&T/Havelles/ABB. 2 each
33 26 Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-
34 26.01 Double door-4 way L&T/Havelles/ABB/ 1 each
35 26.02 Double door-12 way L&T/Havelles/ABB/ 1 each
36 27 Supplying and fixing earthing system as per COPPER PIPE 2 meter long and cpper strip 25*3mm size 50mm dia and terminal size 50*6mm with 25 Kg compound including exvation of pit and refiling the same and making earth chamber Top size 10"X Height 10.25" X Bottom size 13" Fiber/3 ton capacity chamber as required complete in all respect. Make:-Earth plus/True power/Ashloka or its equivalent as as approoved by the Engineer incharge. 1 each
37 28 Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required. 35 Meter
38 29 Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.as required complete in all respect. 20 Meter
39 30 Supply installation testing Commsioning of studio camera for broadcasting with Effective Sensor Size Lens MountFixed,Zoom Ratio12x (optical), Focal Lengthf = 9.3 - 111.6 mm equivalent to f = 29.0 - 348.0 mm on 35 mm lens (16:9),IrisF2.8 - F4.5 auto/manual selectable,FocusAF/MF selectable, 10 mm to 8 (Wide), 1000 mm to 8 (Tele),Image StabilizerON/OFF selectable, shift lens,Filter DiameterM62 mm,Imaging Device (Type)1.0-type (13.2 mm x 8.8 mm) back-illuminated Exmor RS CMOS sensor\nImaging Device (Pixel Count)Approx. 20 M pixels (total) Approx. 14.2 M pixels (Effective)\nEffective Picture Elements3840 (H) x 2160 (V)Minimum Illumination1.7 lux (Low Lux)\nShutter Speed[60i]: 1/8 - 1/10,000 (1/6 - 1/10,000 when shooting with 24p) [50i]: 1/6 -1/10,000Audio InputXLR-type 3-pin (female) (x2), line/mic/mic +48 V selectable,Video OutputIntegrated into Multi/Micro USB jack (x1), RCA pin(x1), Composite 1.0Vp-p, 75 O,Audio OutputIntegrated into Multi/Micro USB jack(x1), RCA pin(Monaural)(x1),SDI OutputBNC (x1), 3G/HD/SD SMPTE ST 424/ST 292-1/ST 259 standards,Headphone OutputStereo mini jack (x1),Speaker OutputMonaural DC InputDC jack,RemoteStereo mini-mini jack (F2.5 mm),HDMI OutputHDMI connector (Type A)LCD8.8cm (3.5 type), Approx. 1.56M dots,Built-in MicrophoneOmni-directional stereo electret condenser microphoneSupported Format IEEE 802.11 b/g/n Frequency Band2.4 GHz bandwidth SecurityWEP/WPA-PSK/WPA2-PSK,1.5G, 3G, 6G, 12G,Optical SDI ,Supports optional SMPTE optical module,SDI CCU control from ATEM Computer Interface,Microphone,Integrated stereo microphone USB 2.0 Mini-B port for software updates including all standred accessories compleate in all respect.Make: Sony/Panasonic/Canon as approoved by the Engineer incharge. 1 Nos
40 31 Supply, Installation, Testing and comissioning of network Switch with Power on Ethernet(PoE) enabled, 8 Port 10/100/1000 base as required compleat in all respect. Make: Cisco/Extreme/juniper as approoved by the Engineer incharge. 2 Nos
41 32 Supply installation Testing and commissioning of 24 10/100/1000 BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable to 10GbE SFP+ in same hardware, 1 Fixed AC PSU, 1 RPS port e, 1 Fixed AC PSU, 1 RPS port. Should support AVB and SDN. Should support sflow/NetFlow/jflow and IGMP,MLD., IGMP Snooping, Routing Protocols: IPV4: Static routing, PBR, RIPv2, OSPF v2 IPV6: PBR, Static routing, RIPng, OSPFv3, IPv4 & IPv6 RIP and RIPng ready from day 1. Make: Cisco/Extreme/juniper as approoved by the Engineer incharge. 1 Nos
42 33 Supply ,Installation ,Testing and Commissioning of Cat6 UTP 24-26 AWG Patch Cord - 1mtr with cross separator, Manufactured from stranded wires for flex-life, Minimum length 1m, LSZH (Low Smoke Zero Halogen) standards like IEC 60332-1 Make : Huber+Suhner/ Panduit/ systimax/ R&M) as approoved by the Engineer incharge. 45 Nos
43 34 Providing comprehensive maintenance for a period of Five years from the date of successfull compleation & handing-over of the system to the owner as certified by the Engineer-in-charge. The contractor shall guarantee the all equipment against all defects of materials and workmanship for the period of Five years, including the High Voltage But excluding mechnical damage. Any defects arising during this comprehensive maintenace period shall be rectified and made good by the vendor at his own risk & cost to the satisfaction owner. The contractor/Bidder will provide monthly visits. of service Engineer along with the service spares during the contract period at site. Any defects, arising will be attended within 24 hours.The rates quoted by the contractor shall be complete including cost of all labour & material etc.The contractor/Bidder will Mainitain the log book under the control of Temple authorety. 1 job
44 35 Note:All the rates quoted by the contractor shall be complete finished work including three year free warranty and cost of all labour, material, scaffolding, finishing as required with tools, plants, lead, lift, taxes, tollage, octroi, royalties,licence etc. All works shall be executed as per drawings, specification and instructions of Site incharge and shall include the supply and installation at site of all the equipment, ancillary materials as specified and all such items what-so-ever which may be required to fulfill the intent and purpose as laid down in the specification and/or the drawings. All materials shall be as per ISI specification and with BIS Registration Number and its validity Certifications marked wherever applicable. The material shall be duly approved by Site incharge before incorporation in the actual work.The Amplifiers/ controller /Speakars /Call station/ microphone Should be same make, no sub brand will be allowed. For general specifications Max-± 5% deviation in parameters will be allowable provided that it may not effect the performance of the system.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail