Military Engineer Services-MES has published Miscellaneous Repairs To Chhajja, Floor, Tiling, Plastering, Joinery, False Ceiling, Roof Treatment Etc In Smq, Billets And Messes At Afs Jaisalmer.. Submission Date for this Tender is 02-12-2019. Railway Ancillaries Tenders in GE (AF) Jaisalmer Rajasthan. Bidders can get complete Tender details and download the document.
Name of Work: MISCELLANEOUS REPAIRS TO CHHAJJA, FLOOR, TILING, PLASTERING, JOINERY, FALSE CEILING, ROOF TREATMENT ETC IN SMQ, BILLETS AND MESSES AT AFS JAISALMER. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down frame with shulters (without taking off shutters from the frames) area not exc 1.5 Sqm each | 30 | Each | |
2 | 2 | Description all as per Sl Item No 1 above but area exc 1.5 Sqm but not exc 4 Sqm each | 15 | Each | |
3 | 3 | Taking down shutters only area exc 1.00 Sqm but n exc 2 Sqm each | 30 | Per Leaf | |
4 | 4 | Taking down wall panelling of any description type including frame work and E/M fitting/Fixtures of any decsription etc complete all as directed.\n | 150 | Sqm | |
5 | 5 | Dismantling of floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises. | 930 | Sqm | |
6 | 6 | Taking down cement plaster of any discription on any surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. | 700 | Sqm | |
7 | 7 | Demolition of brickwork or stone/boulder masonary built in cement mortar including all quoins, arches, pillar etc complete all as directed. | 10 | Cum | |
8 | 8 | Dismantling of precast concrete articles of any description, size or thickness as in hardstanding/paths/aprons etc complete all as directed. | 10 | Cum | |
9 | 9 | Demolition of plain cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as directed. | 40 | Cum | |
10 | 10 | Taking down/Dismantling of false ceiling boards of any description size or thickness including frame work etc complete all as directed. | 200 | Sqm | |
11 | 11 | M&L for precast cement concrete (1:3:6) type C1 (20mm graded stone aggregate) solid block masonary exc 10 cm in width and set in CM (1:6) | 6 | Cum | |
12 | 12 | M&L for square rubble walling Jodhpur type brought upto courses well bonded, bedded and solidly hearthed and built in CM (1:6) | 10 | Cum | |
13 | 13 | External angles (for quoins and Jambs) in facing for square rubble (of angle) walling Jodhpur type, brought upto courses. | 10 | RM | |
14 | 14 | Extra over stone walling for hammer dressing with maximum depression to face stones with maximum depression on face from a straight edge not exc 20mm and dressing to face stones and face beds and joints as specified to squared rubble walling Jodhpur type brought upto courses etc complete all as directed. | 50 | Sqm | |
15 | 15 | M&L for PCC (1:2:4) type B1 (20mm graded stone aggregate) cast in situ inclusive of steel formwork (straight or curved) as in kerb stones set in Cm (1:3) | 5 | Cum | |
16 | 16 | Cutting into old masonary (any type) built in cement mortor to form tooting and bonding in new stone or block work including making good in cement mortor. | 10 | Sqm | |
17 | 17 | M&L for green marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills , platforms and like set in CM (1:4) including 15mm thick bedding in CM (1:6) and pointing in white cement (1-2) using marble dust with admixture of pigment to match with marble shade etc complete all as directed.. | 50 | Sqm | |
18 | 18 | Cutting holes in any type of masonary built in cement mortor for inserting hold fasts and making good dismantled portion in cement concrete (1:2:4) type B-1 etc complete all as directed. | 20 | Each | |
19 | 19 | S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on boths sides etc complete all as directed. | 40 | Sqm | |
20 | 20 | S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19mmx19mmx19 gauge for stiles & 15mmx15mmx19 gauge for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading & joined together with solvent cement etc complete all as specified. | 50 | Sqm | |
21 | 21 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube 19mmx19mmx19 gauge & PDM rubber gasket wealther seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15x15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitably screwed. | 120 | RM | |
22 | 22 | S&F 5mm thick solid PVC wall panelling/ Lining consisting of 5mm thick prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame etc complete all as per specifications and directed.\nNote:- Rate shall be inclusive of refixing of dismantled E/M fittings and fixtures vide Sl Item No | 150 | Sqm | |
23 | 23 | S&F 5mm thick PVC sheet fillet of width 35mm with U shape groove of 2mm depth at centre for wall panelling inclusive of fixing on to wall with screws to make PVC frame as per specification and drawing. | 350 | RM | |
24 | 24 | S&F Aluminium anodised barrel tower bolt of extruded section 200m size. | 200 | Each | |
25 | 25 | S&F Aluminium alloy, anodised sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. | 200 | Each | |
26 | 26 | S&F 100mm size of butt hinges of extruded anodised aluminium alloy with galvanised mild steel hinge pin | 300 | Each | |
27 | 27 | S&F 100mm size D type handle anodised extruded aluminium alloy handle fabricated type. | 50 | Each | |
28 | 28 | Description all as per Sl item No 27 above but 150 mm size | 50 | Each | |
29 | 29 | S&F 4 lever brass Mortic lock vertical type, 65mm size | 40 | Each | |
30 | 30 | S&F aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flanges. | 60 | Each | |
31 | 31 | S&F 150 mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor. | 100 | Each | |
32 | 32 | S&F aluminium (extruded section body) door closure hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width | 40 | Each | |
33 | 33 | Description all per Srl Item No 32 above but fixed in repairs | 20 | Each | |
34 | 34 | S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty etc complete all as directed. | 15 | Each | |
35 | 35 | S&F Mild steel conforming to Fe-290 Gde E-165 frame of work such as grills with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars: barred iron doors, ladders, railing ,door frames and similar work etc complete all as directed. | 140 | Kgs | |
36 | 36 | S&F anodised aluminium extruded sections as in frame for doors, windows, ventillators, partions including joining cleat for fixing etc complete all as directed. | 200 | Kgs | |
37 | 37 | S&F anodised aluminium sections for door shulters (aluminium sections weighing 0.55 Kg/m) including necessary joining cleats, glazing clips, rubber neoprane packing, extruded anodised aluminium handle 2 Nos in each door shutter and 04 Nos hinges each shutter etc complete all as specified. | 50 | Sqm | |
38 | 38 | S&F anodised aluminium extruded sections as in window and ventillator shutters, side hung type without sash bars ( aluminium sections weighing 0.55 Kg/m) including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No each shutter) extruded anodised aluminium alloy with galvanised mild steel hinge pin 100mm long (03 Nos each shutter) extruded enodised aluminium handle suitable type (01 No each shutter) etc complete all as specified. | 40 | Sqm | |
39 | 39 | M&L for Anodised aluminium snap grid frame work for false ceiling as specified | 200 | Sqm | |
40 | 40 | S&F hangers from RCC soffit/Steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40x3mm size 60mm long etc complete all as specified. | 200 | Sqm | |
41 | 41 | M&L for exposed metal frame ceiling with calcium silicate 8 mm thick board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid. | 200 | Sqm | |
42 | 42 | M&L for machine cut kota stone 18-20 mm thick and of size 450/550x550mm laid is floors in squares or rectanguliar pattern laid over 15mm thick screed bad in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab including rubbing and polishing complete. | 200 | Sqm | |
43 | 43 | Ditto all as in Sl item No 42 above but in skirtings with prepolished kota stone of size 450/550 mm x 100 mm over 10 mm thick backing coat in CM (1:4). | 15 | Sqm | |
44 | 44 | M&L for 20mm thick black granite slabs/Tiles laid in floors/treads over 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite. | 40 | Sqm | |
45 | 45 | Description all per Srl Item No 44 above but in skirtings/risers with 10 mm thick backing coat in CM (1:4). | 8 | Sqm | |
46 | 46 | Extra over stone slabs for rounding to edges such as in steps, plat form and other similiar situation | 80 | RM | |
47 | 47 | M&L for PCC (1:4:8) type D-2 (40 mm graded stone aggregate) as in sub base 100mm thick finished over & through to receive the topping layer. | 1090 | Sqm | |
48 | 48 | M&L for PCC (1:2:4) type B-1 (20mm graded stone aggregate) as in floors 40 mm thick finished even and smooth without using extra cement. | 200 | Sqm | |
49 | 49 | S&F 1.5 mm thick 38mm wide plastic dividing strips fixed in concrete floors etc complete all as directed and specified. | 208 | RM | |
50 | 50 | S&F coloured glazed ceramic tiles in dado/skirting 450x350x7mm/350x250x7mm thick over 10mm thick CM (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile. | 400 | Sqm | |
51 | 51 | S&F joint free coloured Non Skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floors etc over 15mm thick CM (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match. | 200 | Sqm | |
52 | 52 | S&F vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tile exc 0.42 Sqm but not exc 1.00 sqm in floors laid over 15mm thick CM (1:6) bedding set and jointed is neat cement slurry and pointed in coloured cement to match. | 300 | Sqm | |
53 | 53 | Description all per Srl Item No 52 above but in skirting with and including 10mm thick CM(1:4) backing coat set and jointed is neat cement paste and pointed in coloured cement to match | 30 | Sqm | |
54 | 54 | S&L M-35 grade 60mm thick grey cement with pigment machine pressed factory made precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 with and including 25mm thick compacted thickness stone dust bedding laid to required level & slope wall compacted. | 250 | Sqm | |
55 | 55 | M&L for 15mm thick internal plaster in CM (1:6) on stone masonary surface other than fair face of brickwork finished even and smooth with 3mm thick wall care putty. | 350 | Sqm | |
56 | 56 | M&L for 5mm thick ceiling plaster in CM (1:3) finished even and smooth with 3mm thick wall care putty. | 150 | Sqm | |
57 | 57 | M&L for 15mm thick external plaster in CM (1:4) on stone masonary surfaces or surfaces other than fair faces of brick work. | 200 | Sqm | |
58 | 58 | M&L for preparation of surfaces newly plastered wall surfaces and applying two coats of oil emulsion distemper of approved tint over a coat of alkali resisitant primer | 250 | Sqm | |
59 | 59 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of white wash. | 150 | Sqm | |
60 | 60 | M&L for preparation of newly plastered external wall surfaces and applying two coats of cement based paint of different tints in camouflage pattern as approved | 200 | Sqm | |
61 | 61 | S&F 5.00mm thick clear glass fixed in windows/Ventillators etc complete all as directed. | 15 | Sqm | |
62 | 62 | M&L for prelaminated particle board 9 mm thick interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work | 15 | Sqm | |
63 | 63 | S&F 8.00 mm thick clear glass fixed in door shutters etc complete all as directed. | 40 | Sqm | |
64 | 64 | S&F 4.00 mm thick figures glass in ventilators etc complete all as directed. | 5 | Sqm | |
65 | 65 | Hacking out old broken glass (any thickness, size, quality or discription) from metal frames including punching or drilling out old glazing pins/spring clips | 130 | Sqm | |
66 | 66 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as directed. | 20 | Sqm | |
67 | 67 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of distempers oil emulsions. | 200 | Sqm | |
68 | 68 | M&L for preparation of new steel surfaces of any discription over 10cm width or girth and applying two coats of synthethic enamel paint over a coat of red oxide primer etc complete all as directed.. | 40 | Sqm | |
69 | 69 | S&F 32mm bore of pipe low density polythylene pipes (LDPE) with fittings as required of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors etc. | 50 | RM | |
70 | 70 | Description all per Srl Item No 69 above but 40mm bore of pipe | 40 | RM | |
71 | 71 | S&F in repairs 15 mm bore fancy type chromium plated bib taps with crutch or butter fly handle, screwed down, screwed for iron pipe etc complete. | 100 | Each | |
72 | 72 | S&F in repairs 15mm bore fancy type chromium plated pillar taps with capstan heads, screwed down high pressure with long screwed sharks and fly nuts screwed down for iron pipes etc complete all as directed.. | 100 | Each | |
73 | 73 | S&F repair 15mm size fancy type chromium plated stop cocks screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes etc complete all as directed. | 100 | Each | |
74 | 74 | S&F in repairs white coloured vitreous china wash down water closet pan (Pedestal pattern) with and including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device. | 15 | Each | |
75 | 75 | S&F in repairs white coloured vitreous china urinal half stall type with 40mm size brass chromium plated waste coupling with long screwed shanks and fly nuts flange end bedded in red lead. | 15 | Each | |
76 | 76 | S&F in repairs vitrous china wash basin, white, flat back size 550x400mm including brackets, with 32mm size brass chromium plated waste coupling with long screwed shanks and fly nuts flange end bedded in red lead. | 10 | Each | |
77 | 77 | S&F in repairs 10 litres capacity PVC valveless syphonic action type flushing listern low level white with inlet ball valve float and handle including brackets polythylene flush pipe etc complete all as directed.. | 40 | Each | |
78 | 78 | S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) etc compplete all as directed. | 15 | Each | |
79 | 79 | S&F in repairs towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. | 20 | Each | |
80 | 80 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm | 50 | Each | |
81 | 81 | Description all per Srl Item No 80 above but 600mm length | 40 | Each | |
82 | 82 | S&f in repairs 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board coloured PVC frame and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed. | 40 | Each | |
83 | 83 | S&F LDPE waste pipes of 32mm bore pressure rating 6 Kgf/Sqcm for wash basin as specified. | 300 | Rm | |
84 | 84 | Supply and fix as in repair,Towel rail 450 mm long of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleat ( min weight 170 gms). | 20 | Each | |
85 | 85 | S & F PVC bend 110mm dia with access door including removing old damaged CI bends. | 5 | Each | |
86 | 86 | S & F PVC bend 75mm dia with access door including removing old damaged CI bends. | 5 | Each | |
87 | 87 | S & F PVC floor trap with out let 75mm dia plain with grating including jointing. | 6 | Each | |
88 | 88 | S & F in repairs galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width or aperrture 1.40 mm and fixed with tinned tackles or galvanised wire staples. | 10 | Sqm | |
89 | 89 | S&F sheet glass ordinary quality 3mm thick glazing with oil putty in squares n.exc 0.5 sqm in each pane. | 50 | Sqm | |
90 | 90 | S&F frosted sheet glass ordinary quality 3 mm thick glazing with oil putty in squares n.exc. 0.50 sq mm each pane | 5 | Sqm | |
91 | 91 | S &F Factory made Second class hard wood 35mm thick gauzed and skeleton door shutters, divided into squares with plain chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing wire cloth any number all as specified. | 20 | Sqm | |
92 | 92 | M & L for steel windows with side hung single shutters(inside wire mesh shutters ) including friction hinges with steel handle and fittings complete with glazing bars dovetailed or welded (except glass panes and wire mesh and guard bars.) | 23 | SQM | |
93 | 93 | S&F in repair shower rose,PVC suitable for 15 mm bore pipe with swieveling joints Make -JAGUAR/CERA/HINDWARE. | 10 | Each | |
94 | 94 | M&L for 50mm thick cement concrete type C-2 1:3:6 using 40 mm graded stone aggregate as in for plinth protection. | 90 | Sqm | |
95 | 95 | S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm | 10 | Each | |
96 | 96 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm | 10 | Each | |
97 | 97 | M&L Rendring 10mm thick(1:4 on ceiling) on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-in-Charge. | 20 | Sqm | |
98 | 98 | Raking out joints/ pointing to random rubble stone masonary walls or to bricks on edge in floors,surface channels, roofs, etc | 30 | X Sqm | |
99 | 99 | M&L for keyed pointing to squarred rubble masonry, uncoursed or brought upto courses stone masonary walls in CM 1:4. | 70 | XSQM | |
100 | 100 | Supply & fixing 500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with top) hoisted and fixed in position all as specified after dismantling of existing | 20 | Each | |
101 | 101 | Supply & fixing 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with top) hoisted and fixed in position all as specified after dismantling of existing | 5 | Each | |
102 | 102 | S&F Sheet glass shelf assembley consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair. | 6 | Each | |
103 | 103 | M&L cement concrete Type D2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed | 8 | Cum | |
104 | 104 | S&F in repair Jet spray brass with CP tube 1.0/1.5 m make plumber, hindware, or equivqlent. all as specified and directed by Engr-in-Charge. | 8 | Each | |
105 | 105 | S&F in repair Cabinet Mirror make cera, hindware, or equivqlent. all as specified and directed by Engr-in-Charge. | 8 | Each | |
106 | 106 | S&F in repair 2-in-1 CP bib cock make cera, hindware, or equivqlent. all as specified and directed by Engr-in-Charge. | 8 | Each | |
107 | 107 | S&F in repairs PTMT Grating, 100mm dia fixed all as specified. | 50 | Each | |
108 | 108 | S&F Toilet paper holder of CP fixed walls with chromium plated (CP) Brass,fixed in repair (Jaguar/Cera/Hindware). | 10 | Each | |
109 | 109 | S&F in repair any colour european type combination pattern WC casket type with mounted flushing cistern, PVC connection and jointed to sewage pipe with P or S trap. make Hindware, Parryware ,Cera. | 8 | Each | |
110 | 110 | M/L,fixed in repair , CI floor trap with CI grating 100mm dia and jointing to waste pipe all as directed. | 12 | Each | |
111 | 111 | S&F in repair KIT of low level PVC flushing cistern complete all as specified Make(Cera/Hindware/Paragware. | 45 | Each | |
112 | 112 | S&F Urinal spreader of CP for fixing with 15 mm dia pipe. (Minimum weight 60gms) fixed in repair Make(Cera/Hindware/Jaguar). | 15 | Each | |
113 | 113 | S&F in repair Plastic water closet seat white ,closed patternwith flat bottom and cover and mild steel chromoum plated or aluminium higining devicefixing in repair Make (Cera/hindware/Jaguar) | 72 | Each | |
114 | 114 | S&F in repair PTMT bib tap of 15mm bore of make Cera/Jaguar /Hindware or equivalent as approved by the GE. | 400 | Each | |
115 | 115 | Taking up to down steel water tubing including connected fitting, fixture land specials etc and disconnection of fitting such as stop valve bib tap etc including cleaning of pipe for re-fixing of the following sizes :- \n(a) 15mm bore | 250 | RM | |
116 | 116 | (b) Description all as per Srl item No 116 but 20 mm bore | 150 | RM | |
117 | 117 | Re-fixing of old mild steel galvanized water tubing obtained from Item above new incl fittings such as elbow ,Tee etc ,and connections in new or old position (walls, ceilling, floors etc) of the following size :-\n (a) 15 mm bore | 40 | RM | |
118 | 118 | (b) Description all as per Srl item No 118 but 20 mm bore | 20 | RM | |
119 | 119 | M&L mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls and ceiling or laid to floors of the following sizes :-(Jindal/Tata)\n (a) 15mm bore | 210 | RM | |
120 | 120 | (b) Description all as per Srl item No 120 but 20 mm bore | 130 | RM | |
121 | 121 | S&F Stop valve of 15 mm dia PTMT any colour high pressure screwed for iron pipe and fixed in repair JAGUAR/CERA/HINDWARE.\n | 40 | Each | |
122 | 122 | S&F in repair 15mm dia concealed stop cock with long shank and cup of cast copper alloy chromium plated fancy type screwed down high pressure with capastan head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge. | 20 | Each | |
123 | 123 | S&F Stop valves, 15mm bore cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair | 20 | Each | |
124 | 124 | Description all as per Srl item No 124 but 20 mm bore | 20 | Each | |
125 | 125 | S&F Angle Stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions suitable for 15 mm bore tubes, FIXED IN REPAIRS complete all as specified | 20 | Each | |
126 | 126 | Description all as per Srl item No126 but twin type. | 15 | Each | |
127 | 127 | S&F Waste coupling of 32 mm dia PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms) fixed in repair. | 25 | Each | |
128 | 128 | Description all as per Srl item No 128 but 40 mm bore | 25 | Each | |
129 | 129 | S&F waste fitting fixed in repairs (waste coupling) brass chromium plated for glazed ware sink, basin etc with long screwed shanks and fly nuts flange complete for the following sizes all as directed by Engr-in-charge :-\n(a) 32mm bore | 40 | Each | |
130 | 130 | (b) Description all as per Srl item No 130 but 40 mm bore | 25 | Each | |
131 | 131 | S&F in repairs Sand cast,100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors. | 25 | RM | |
132 | 132 | Description all as per Srl item No 133 but fixed to walls | 80 | RM | |
133 | 133 | S&F in repairs Sand cast,75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors. | 40 | RM | |
134 | 134 | Description all as per Srl item No 135 but fixed to walls | 65 | RM | |
135 | 135 | S&F in repair CI Bends 100 mm dia (any radius),diminishing pieces or tapers (larger bore measured) | 20 | Each | |
136 | 136 | S&F in repair CI Bends 75 mm dia (any radius),diminishing pieces or tapers (larger bore measured) | 25 | Each | |
137 | 137 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors(kishan/fenotex) | 25 | RM | |
138 | 138 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls (kishan/fenotex). | 30 | RM | |
139 | 139 | S&F in repair PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls (kisan/fenotex). | 45 | RM | |
140 | 140 | S&F in repair PVC (SWR) bends any 75 mm dia (kisan/fenotex) | 35 | Each | |
141 | 141 | Description all as per Srl item No 142 but 110 mm dia | 35 | Each | |
142 | 142 | S&F in repair Brass chromium plated towel rack 24 " long, fixed in position with steel screws complete all as specified JAGUAR/CERA/HINDWARE.. | 40 | Each | |
143 | 143 | S&F in repair chromium plated health faucet 15 mm bore with all connected fittings.as approved by the GE JAGUAR/CERA/HINDWARE.. | 60 | Each | |
144 | 144 | S&F in repair 15 mm dia CP wall mixture for mixing hot & cold water screwed down for iron pipe and fixed all as directed by Engr-in-charge MAKE JAGUAR/CERA/HINDWARE. | 38 | Each | |
145 | 145 | S&Fixed in repairs 15 mm bore chromium plated shower rose with or without swivel joint,125 mm size,including fixing to steel pipe or union all as directed by Engineer-in-charge JAGUAR/CERA/HINDWARE.. | 45 | Each | |
146 | 146 | S&F in repair water closet squatting pan 'Orissa Pattern'of size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete incl. jointing and provision of PCC 1:5:10 bed as in repairs Make- JAGUAR/CERA/HINDWARE.. | 4 | Each | |
147 | 147 | S&F in repairs decorative curtain rod, Harrison rails, mild steel, wooden finish, with wooden rings 2 100 mm c/c incl wooden decorative end brackets incl dismantling of old curtain pipe. | 19 | RM | |
148 | 148 | M&L for thickness upto 10 mm 300x300 mm industrial non skid, high strength tiles make JOHNSON Endura or equivalent make as per Appx B over & including 15 mm thick screed bed in CM (1:6) complete. | 140 | Sqm | |
149 | 149 | Dismantling of existing water proofing roof treatment any type and in any location up to existing rcc slab by chiesling, drilling, scraping etc. | 200 | Sqm | |
150 | 150 | Supply only integral water proofing compound. | 22.94 | Kg | |
151 | 151 | M&L for rendering 10mm thick in CM(1:4) with water proofing compound over green concrete surface (WPC will be paid saperately) even and smooth without using extra cement. | 200 | Sqm | |
152 | 152 | M&L for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. | 200 | Sqm | |
153 | 153 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced torch application complete all as specified. | 4 | Sqm | |
154 | 154 | Dismantling of plain or corrugated steel sheeting, asbestos cement sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. | 100 | Sqm | |
155 | 155 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 60 | Sqm | |
156 | 156 | Ditto as in item no.155 but in refixing of any thickness sheet. | 40 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail