Notice For Quotation Rate Purpose Of Combined Desk With Bench With Back At Ge ( Af ) Station Bkt, GE (AF) BKT-Uttar Pradesh

Notice For Quotation Rate Purpose Of Combined Desk With Bench With Back At Ge ( Af ) Station Bkt , Suply Of Combined Desk With Bench With Back Of Size 1220Mm X 1000Mm X750mm ( As Per Drawing A1 , A2 , A3 ) Key Specification :- Irrespective Wha Is Shown In Drawing , Over All Size Of The Desk With Bench Shall Be 1220Mm X 1000Mm X750mm Frame :- Bottom , Legs , Top Rails And Stiffeners Etc Shall Be Of 25Mm X 25Mm Ms Square Tube 1 . 6Mm Thick . Bending , Welding , Reviting , Bolting , Lapping , Turning And Other Items/ Fitting Shall Be Done/ Provided As Specified In Relevent Is And As Per Trade Engineering Norms And Pattern . Top , Sides , Bottom Of Desk And Seat & Back Rest Of Bench Shall Be Made Out Of 18Mm Thick Plywood Commercial Bwr Grade Duly Laminated With 1Mm Thick Sunmica Sheet Of Approved Quality And Shade On Top , Side , Back & All Exposed Surfaces Including 4Mm Thick Teak Wood/ Pvc Edging All Around All As Directed By Ge . Legs Of Combined Desk With Bench Shall Be Provided With Pvc Unbreakable Adjuster As Shown In Drawing . All Exposed Steel Surfaces Shall Be Spray Painted With Two Coats Of Synthetic Enamel Paint Of Shade As Approved By Ge Over A Coat Of Red Oxide Primer . All Other Items/Fittings Shall Be As Shown On Drawing And Provided As Per Relevent Is And Trade Engineering Norms/Patterns . Make Of Ply Wood - Archid/Greenply/Durian/Bhutan/Eco/Kitply . , Suply Of Combined Desk With Bench With Back Of Size 1220Mm X 1000Mm X 645Mm Height For Desk And 750Mm Height For Bench With Back ( As Per Drawing B1 , B2 , B3 ) Key Specification :- Irrespective Wha Is Shown In Drawing , Over All Size Of The Desk With Bench Shall Be 1220Mm X 1000Mm X 645Mm Height For Desk And 750Mm Height For Bench With Back Frame :- Bottom , Legs , Top Rails And Stiffeners Etc Shall Be Of 25Mm X 25Mm Ms Square Tube 1 . 6Mm Thick . Bending , Welding , Reviting , Bolting , Lapping , Turning And Other Items/ Fitting Shall Be Done/ Provided As Specified In Relevent Is And As Per Trade Engineering Norms And Pattern . Top , Sides , Bottom Of Desk And Seat & Back Rest Of Bench Shall Be Made Out Of 18Mm Thick Plywood Commercial Bwr Grade Duly Laminated With 1Mm Thick Sunmica Sheet Of Approved Quality And Shade On Top , Side , Back & All Exposed Surfaces Including 4Mm Thick Teak Wood/ Pvc Edging All Around All As Directed By Ge . Legs Of Combined Desk With Bench Shall Be Provided With Pvc Unbreakable Adjuster As Shown In Drawing . All Exposed Steel Surfaces Shall Be Spray Painted With Two Coats Of Synthetic Enamel Paint Of Shade As Approved By Ge Over A Coat Of Red Oxide Primer . All Other Items/Fittings Shall Be As Shown On Drawing And Provided As Per Relevent Is And Trade Engineering Norms/Patterns . Make Of Ply Wood - Archid/Greenply/Durian/Bhutan/Eco/Kitply .

Refer document

Refer document

Refer document